The main difference is the removal of
std::error_code exists(const Twine &path, bool &result);
It was an horribly redundant interface since a file not existing is also a valid
error_code. Now we have an access function that returns just an error_code. This
is the only function that has to be implemented for Unix and Windows. The
functions can_write, exists and can_execute an now just wrappers.
One still has to be very careful using these function to avoid introducing
race conditions (Time of check to time of use).
llvm-svn: 217625
This reverts commit 93c7e6161e1adbd2c7ac81fa081823183035cb64.
This commit got approved first, but was dependant on another one going in (The one pretty printing attribute values). I'll reapply when the other one is in.
llvm-svn: 217183
This patch adds to LLVMSupport the capability of writing files with
international characters encoded in the current system encoding. This
is relevant for Windows, where we can either use UTF16 or the current
code page (the legacy Windows international characters). On UNIX, the
file is always saved in UTF8.
This will be used in a patch for clang to thoroughly support response
files creation when calling other tools, addressing PR15171. On
Windows, to correctly support internationalization, we need the
ability to write response files both in UTF16 or the current code
page, depending on the tool we will call. GCC for mingw, for instance,
requires files to be encoded in the current code page. MSVC tools
requires files to be encoded in UTF16.
Patch by Rafael Auler!
llvm-svn: 217068
When folding a fused multiply-add builtin call, make sure that we propagate the
correct result in the case where the addend is zero, and the two other operands
are finite non-zero.
Example:
define double @test() {
%1 = call double @llvm.fma.f64(double 7.0, double 8.0, double 0.0)
ret double %1
}
Before this patch, the instruction simplifier wrongly folded the builtin call
in function @test to constant 'double 7.0'.
With this patch, method 'fusedMultiplyAdd' correctly evaluates the multiply and
propagates the expected result (i.e. 56.0).
Added test fold-builtin-fma.ll with the reproducible from PR20832 plus extra
test cases to verify the behavior of method 'fusedMultiplyAdd' in the presence
of NaN/Inf operands.
This fixes PR20832.
Differential Revision: http://reviews.llvm.org/D5152
llvm-svn: 216913
The attached patch simplifies a few interfaces that don't need to take
ownership of a buffer.
For example, both parseAssembly and parseBitcodeFile will parse the
entire buffer before returning. There is no need to take ownership.
Using a MemoryBufferRef makes it obvious in the type signature that
there is no ownership transfer.
llvm-svn: 216488
We had two functions for finding the temp or cache directory. Each had a
different set of smarts about OS specific APIs.
With this patch system_temp_directory becomes the only way to do it.
llvm-svn: 216460
This patch fixes a subtle bug in the UNIX implementation of
llvm::sys::argumentsFitWithinSystemLimits() regarding the misuse of a static
variable. This bug causes our cached number that stores the system command line
maximum length to be halved after each call to the function. With a sufficient
number of calls to this function, it will eventually report any given command
line string to be over system limits.
Patch by Rafael Auler.
llvm-svn: 216415
This patch refactors the argument serialization logic used in the Execute
function, used to launch new Windows processes. There is a critical step that
joins char** arguments into a single string, building the command line used to
launch the new process, and the readability of this code is improved if this
part is refactored in its own helper function.
Patch by Rafael Auler!
llvm-svn: 216411
Take a StringRef instead of a "const char *".
Take a "std::error_code &" instead of a "std::string &" for error.
A create static method would be even better, but this patch is already a bit too
big.
llvm-svn: 216393
Based on the STL class of the same name, it guards a mutex
while also allowing it to be unlocked conditionally before
destruction.
This eliminates the last naked usages of mutexes in LLVM and
clang.
It also uncovered and fixed a bug in callExternalFunction()
when compiled without USE_LIBFFI, where the mutex would never
be unlocked if the end of the function was reached.
llvm-svn: 216338
This patch contains the LLVM side of the fix of PR17239.
This bug that happens because the /link (clang-cl.exe argument) is
marked as "consume all remaining arguments". However, when inside a
response file, /link should only consume all remaining arguments inside
the response file where it is located, not the entire command line after
expansion.
My patch will change the semantics of the RemainingArgsClass kind to
always consume only until the end of the response file when the option
originally came from a response file. There are only two options in this
class: dash dash (--) and /link.
Reviewed By: rnk
Differential Revision: http://reviews.llvm.org/D4899
Patch by Rafael Auler!
llvm-svn: 216280
Owning the buffer is somewhat inflexible. Some Binaries have sub Binaries
(like Archive) and we had to create dummy buffers just to handle that. It is
also a bad fit for IRObjectFile where the Module wants to own the buffer too.
Keeping this ownership would make supporting IR inside native objects
particularly painful.
This patch focuses in lib/Object. If something elsewhere used to own an Binary,
now it also owns a MemoryBuffer.
This patch introduces a few new types.
* MemoryBufferRef. This is just a pair of StringRefs for the data and name.
This is to MemoryBuffer as StringRef is to std::string.
* OwningBinary. A combination of Binary and a MemoryBuffer. This is needed
for convenience functions that take a filename and return both the
buffer and the Binary using that buffer.
The C api now uses OwningBinary to avoid any change in semantics. I will start
a new thread to see if we want to change it and how.
llvm-svn: 216002
This reverts commit r215784 / 3f8a26f6fe16cc76c98ab21db2c600bd7defbbaa.
LLD has 3 StringSaver's, one of which takes a lock when saving the
string... Need to investigate more closely.
llvm-svn: 215790
This class is generally useful.
In breaking it out, the primary change is that it has been made
non-virtual. It seems like being abstract led to there being 3 different
(2 in llvm + 1 in clang) concrete implementations which disagreed about
the ownership of the saved strings (see the manual call to free() in the
unittest StrDupSaver; yes this is different from the CommandLine.cpp
StrDupSaver which owns the stored strings; which is different from
Clang's StringSetSaver which just holds a reference to a
std::set<std::string> which owns the strings).
I've identified 2 other places in the
codebase that are open-coding this pattern:
memcpy(Alloc.Allocate<char>(strlen(S)+1), S, strlen(S)+1)
I'll be switching them over. They are
* llvm::sys::Process::GetArgumentVector
* The StringAllocator member of YAMLIO's Input class
This also will allow simplifying Clang's driver.cpp quite a bit.
Let me know if there are any other places that could benefit from
StringSaver. I'm also thinking of adding a saveStringRef member for
getting a stable StringRef.
llvm-svn: 215784
Add header guards to files that were missing guards. Remove #endif comments
as they don't seem common in LLVM (we can easily add them back if we decide
they're useful)
Changes made by clang-tidy with minor tweaks.
llvm-svn: 215558
Remove the MinGW32 and Cygwin types from the OSType enumeration. These values
are represented via environments of Windows. It is a source of confusion and
needlessly clutters the code. The cost of doing this is that we must sink the
check for them into the normalization code path along with the spelling.
Addresses PR20592.
llvm-svn: 215303
it breaks the modules builds (where CallGraph.h can be quite reasonably
transitively included by an unimported portion of a module, and CallGraph.cpp
not linked in), and appears to have been entirely redundant since PR780 was
fixed back in 2008.
If this breaks anything, please revert; I have only tested this with a single
configuration, and it's possible that this is still somehow fixing something
(though I doubt it, since no other similar file uses this mechanism any more).
llvm-svn: 215142
path::const_iterator claims that it's a bidirectional iterator, but it
doesn't satisfy all of the contracts for a bidirectional iterator.
For example, n3376 24.2.5 p6 says "If a and b are both dereferenceable,
then a == b if and only if *a and *b are bound to the same object",
but this doesn't work with how we stash and recreate Components.
This means that our use of reverse_iterator on this type is invalid
and leads to many of the valgrind errors we're hitting, as explained
by Tilmann Scheller here:
http://lists.cs.uiuc.edu/pipermail/llvm-commits/Week-of-Mon-20140728/228654.html
Instead, we admit that path::const_iterator is only an input_iterator,
and implement a second input_iterator for path::reverse_iterator (by
changing const_iterator::operator-- to reverse_iterator::operator++).
All of the uses of this just traverse once over the path in one
direction or the other anyway.
llvm-svn: 214737
On Cygwin, getpagesize() returns 64k(AllocationGranularity).
In r214580, the size of X86GenInstrInfo.inc became 1499136.
FIXME: We should reorganize again getPageSize() on Win32.
MapFile allocates address along AllocationGranularity but view is mapped by physical page.
llvm-svn: 214681
There really is no arm64_be: it was a useful fiction to test big-endian support
while both backends existed in parallel, but now the only platform that uses
the name (iOS) doesn't have a big-endian variant, let alone one called
"arm64_be".
llvm-svn: 213748
Having both Triple::arm64 and Triple::aarch64 is extremely confusing, and
invites bugs where only one is checked. In reality, the only legitimate
difference between the two (arm64 usually means iOS) is also present in the OS
part of the triple and that's what should be checked.
We still parse the "arm64" triple, just canonicalise it to Triple::aarch64, so
there aren't any LLVM-side test changes.
llvm-svn: 213743
It's also possible to just write "= nullptr", but there's some question
of whether that's as readable, so I leave it up to authors to pick which
they prefer for now. If we want to discuss standardizing on one or the
other, we can do that at some point in the future.
llvm-svn: 213438
This is a prerequisite for checking for 'mti' and 'img' in a consistent way in
clang. Previously 'img' could use Triple::getVendor() but 'mti' could only use
Triple::getVendorName().
llvm-svn: 213381
This optional dependency on the udis86 library was added some time back to aid
JIT development, but doesn't make much sense to link into LLVM binaries these
days.
llvm-svn: 213300
Triple.cpp still returns "arm64" as prefix for arm64 triple, causing Clang not
being able to select the correct GCCBuiltin IR.
This patch changes the value to correct prefix "aarch64". Regression test will
be added in the coming patch.
Differential Revision: http://reviews.llvm.org/D4516
llvm-svn: 213240
On Windows, wildcard expansion isn't performed by the shell, but left to the
program itself. The common way to do this is to link with setargv.obj, which
performs the expansion on argc/argv before main is entered. However, we don't
use argv in Clang on Windows, but instead call GetCommandLineW so we can handle
unicode arguments. This means we have to do wildcard expansion ourselves.
A test case will be added on the Clang side.
Differential Revision: http://reviews.llvm.org/D4529
llvm-svn: 213114
The memcpy() and overlap helps didn't help much with timings, so clean up the change.
The difference at this point is that we now leave growth of the storage buffer
up to SmallVector's implementation:
- OS.reserve(OS.capacity() * 2);
+ OS.reserve(OS.size() + 64);
llvm-svn: 212837
Including the scratch buffer size in the initial reservation eliminates the
subsequent malloc+move operation and offers a healthier constant growth with
less memory wastage.
When doing this, take care to avoid invalidating the source buffer.
llvm-svn: 212816
Turn llvm::SpecialCaseList into a simple class that parses text files in
a specified format and knows nothing about LLVM IR. Move this class into
LLVMSupport library. Implement two users of this class:
* DFSanABIList in DFSan instrumentation pass.
* SanitizerBlacklist in Clang CodeGen library.
The latter will be modified to use actual source-level information from frontend
(source file names) instead of unstable LLVM IR things (LLVM Module identifier).
Remove dependency edge from ClangCodeGen/ClangDriver to LLVMTransformUtils.
No functionality change.
llvm-svn: 212643
Summary: This is a pre-requisite for supporting the mips-img-linux-gnu triple in clang.
Differential Revision: http://reviews.llvm.org/D4435
llvm-svn: 212626
Use 0 for the invalid buffer instead of -1/~0 and switch to unsigned
representation to enable more idiomatic usage.
Also introduce a trivial SourceMgr::getMainFileID() instead of hard-coding 0/1
to identify the main file.
llvm-svn: 212398
Some versions of Android don't have futimes/futimens and this code wasn't
updated during the recent errc refactoring.
Patch by Luqman Aden!
llvm-svn: 212055
where there is no timeout. In the case where there is a timeout though, the
code is still wrong since it doesn't check that the alarm really went off.
Without this patch, I cannot debug a program that forks itself using
sys::ExecuteAndWait with lldb.
llvm-svn: 211918
string_ostream is a safe and efficient string builder that combines opaque
stack storage with a built-in ostream interface.
small_string_ostream<bytes> additionally permits an explicit stack storage size
other than the default 128 bytes to be provided. Beyond that, storage is
transferred to the heap.
This convenient class can be used in most places an
std::string+raw_string_ostream pair or SmallString<>+raw_svector_ostream pair
would previously have been used, in order to guarantee consistent access
without byte truncation.
The patch also converts much of LLVM to use the new facility. These changes
include several probable bug fixes for truncated output, a programming error
that's no longer possible with the new interface.
llvm-svn: 211749
set on the calling thread.
This allows libclang's indexing threads to propagate their priority to the clang module building threads.
rdar://17459872
llvm-svn: 211747
Provides an abstraction for a random number generator (RNG) that produces a stream of pseudo-random numbers.
The current implementation uses C++11 facilities and is therefore not cryptographically secure.
The RNG is salted with the text of the current command line invocation.
In addition, a user may specify a seed (reproducible builds).
In clang, the seed can be set via
-frandom-seed=X
In the back end, the seed can be set via
-rng-seed=X
This is the llvm part of the patch.
clang part: D3391
URL: http://reviews.llvm.org/D3390
Author: yln
I'm landing this for the second time, it broke Windows bots the first time around.
llvm-svn: 211705
Buildbot reports a test failure on the llvm-mips-linux builder and blames r211588.
Although it doesn't appear in the blamelist, it seems it could also be r211587
(because it's committed to compiler-rt?) since they were tested together.
Reverting the most likely suspect (r211588) to confirm one way or the other.
llvm-svn: 211594
MIPS64 Android bionic has removed cacheflush(). Use __clear_cache() instead for 32-bit and 64-bit MIPS
Patch by Duane Sand <Duane.Sand@imgtec.com>
llvm-svn: 211588
ScaledNumber has been cleaned up enough to pull out of BFI now. Still
work to do there (tests for shifting, bloated printing code, etc.), but
it seems clean enough for its new home.
llvm-svn: 211562
Certain versions of GCC (~4.7) couldn't handle the SFINAE on access
control, but with "= delete" (hidden behind a macro for portability)
this issue is worked around/addressed.
Patch by Agustín Bergé
llvm-svn: 211525
std::recursive_mutex are not available on MinGW and breaks the
builder. Revert to using a function local static and sys::Mutex
just to get the tree green until we figure out a better solution.
llvm-svn: 211424
After a number of previous small iterations, the functions
llvm_start_multithreaded() and llvm_stop_multithreaded() have
been reduced essentially to no-ops. This change removes them
entirely.
Reviewed by: rnk, dblaikie
Differential Revision: http://reviews.llvm.org/D4216
llvm-svn: 211287
This patch removes the LLVM global lock, and updates all existing
users of the global lock to use their own mutex. None of the
existing users of the global lock were protecting code that was
mutually exclusive with any of the other users of the global
lock, so its purpose was not being met.
Reviewed by: rnk
Differential Revision: http://reviews.llvm.org/D4142
llvm-svn: 211277
These errors are strictly unrecoverable and indicate serious issues such as
conflicting option names or an incorrectly linked LLVM distribution.
With this change, the errors actually get detected so tests don't pass
silently.
llvm-svn: 211260
Summary:
Provides an abstraction for a random number generator (RNG) that produces a stream of pseudo-random numbers.
The current implementation uses C++11 facilities and is therefore not cryptographically secure.
The RNG is salted with the text of the current command line invocation.
In addition, a user may specify a seed (reproducible builds).
In clang, the seed can be set via
-frandom-seed=X
In the back end, the seed can be set via
-rng-seed=X
This is the llvm part of the patch.
clang part: D3391
Reviewers: ahomescu, rinon, nicholas, jfb
Reviewed By: jfb
Subscribers: jfb, perl
Differential Revision: http://reviews.llvm.org/D3390
llvm-svn: 211145
Mimic r116632 in passing LLVM_VERSION_INFO from the Makefile build
system to the build. This improves the -version output of tools that
use llvm::cl under the configure+make system.
llvm-svn: 211091
Prior to this change, error handling functions must be installed
and removed only inside of an llvm_[start/stop]_multithreading
pair. This change allows error handling functions to be installed
any time, and from any thread.
Reviewed by: chandlerc
Differential Revision: http://reviews.llvm.org/D4140
llvm-svn: 210937
While std::error_code itself seems to work OK in all platforms, there
are few annoying differences with regards to the std::errc enumeration.
This patch adds a simple llvm enumeration, which will hopefully avoid build
breakages in other platforms and surprises as we get more uses of
std::error_code.
llvm-svn: 210920
The idea of this patch is to turn llvm/Support/system_error.h into a
transitional header that just brings in the erorr_code api to the llvm
namespace. I will remove it shortly afterwards.
The cases where the general idea needed some tweaking:
* std::errc is a namespace in msvc, so we cannot use "using std::errc". I could
add an #ifdef, but there were not that many uses, so I just added std:: to
them in this patch.
* Template specialization had to be moved to the std namespace in this
patch set already.
* The msvc implementation of default_error_condition doesn't seem to
provide the same transformations as we need. Not too surprising since
the standard doesn't actually say what "equivalent" means. I fixed the
problem by keeping our old mapping and using it at error_code
construction time.
Despite these shortcomings I think this is still a good thing. Some reasons:
* The different implementations of system_error might improve over time.
* It removes 925 lines of code from llvm already.
* It removes 6313 bytes from the text segment of the clang binary when
it is built with gcc and 2816 bytes when building with clang and
libstdc++.
llvm-svn: 210687
Some c++ libraries (libstdc++ at least) don't seem to map to the generic
category in in the system_category's default_error_condition.
llvm-svn: 210635
MSVC doesn't seem to provide any is_error_code_enum enumeration for the
windows errors.
Fortunately very few places in llvm have to handle raw windows errors, so
we can just construct the corresponding error_code directly.
llvm-svn: 210631
This patch removes the functions llvm_start_multithreaded() and
llvm_stop_multithreaded(), and changes llvm_is_multithreaded()
to return a constant value based on the value of the compile-time
definition LLVM_ENABLE_THREADS.
Previously, it was possible to have compile-time support for
threads on, and runtime support for threads off, in which case
certain mutexes were not allocated or ever acquired. Now, if the
build is created with threads enabled, mutexes are always acquired.
A test before/after patch of compiling a very large TU showed no
noticeable performance impact of this change.
Reviewers: rnk
Differential Revision: http://reviews.llvm.org/D4076
llvm-svn: 210600
Because we don't have a separate negate( ) function, 0 - NaN does double-duty as the IEEE-754 negate( ) operation, which (unlike most FP ops) *does* attach semantic meaning to the signbit of NaN.
llvm-svn: 210428
Avoid changing behaviour for everyone who's used to the traditional ghostview
UI, especially since it knows how to stay in the foreground unlike xdg-open.
Amendment to r210147.
llvm-svn: 210148
Replace the crufty build-time configure checks for program paths with
equivalent runtime logic.
This lets users install graphing tools as needed without having to reconfigure
and rebuild LLVM, while eliminating a long chain of inappropriate compile
dependencies that included GUI programs and the windowing system.
Additional features:
* Support the OS X 'open' command to view graphs generated by any of the
Graphviz utilities. This is an alternative to the Graphviz OS X UI which is
no longer available on Mountain Lion.
* Produce informative log output upon failure to indicate which programs can
be installed to view graphs.
Ping me if this doesn't work for your particular environment.
llvm-svn: 210001
Introduce the support structures necessary to deal with the Windows ARM EH data.
These definitions are extremely aggressive about assertions to aid future use
for generation of the entries and subsequent decoding.
The names for the various fields are meant to reflect the names used by the
Visual Studio toolchain to aid communication.
Due to the complexity in reading a few of the values, there are a couple of
additional utility functions to decode the information.
In general, there are two ways to encode the unwinding information:
- packed, which places the data inline into the
_IMAGE_ARM_RUNTIME_FUNCTION_ENTRY structure.
- unpacked, which places the data into auxiliary structures placed into the
.xdata section.
The set of structures allow reading of data in either encoding, with the minor
caveat that epilogue scopes need to be decoded manually by constructing the
structure from the data returned by the RuntimeFunction structure.
These definitions are meant for read-only access at the current point as the
first use of them will be to decode the exception information.
llvm-svn: 209998
Input YAML file might contain multiple object file definitions.
New option `-docnum` allows to specify an ordinal number (starting from 1)
of definition used for an object file generation.
Patch reviewed by Sean Silva.
llvm-svn: 209967
On x64, windows.h doesn't include intrin.h for intrinsics. It just
declares them in the global namespace and uses them, expecting the
compiler to lower it as a builtin. We basically need to do this in
clang, eventually.
llvm-svn: 208023
Tested that the right -target-cpu is set in the clang -cc1 command line
when running "clang -march=native -E -v - </dev/null" on both an FX-8150
and an FX-8350. Both are family 15h; the FX-8150 (Bulldozer processor)
reports a model number of 1, and the FX-8350 (Piledriver processor)
reports a model number of 2.
llvm-svn: 207973
Change `BlockFrequency` to defer to `BranchProbability::scale()` and
`BranchProbability::scaleByInverse()`.
This removes `BlockFrequency::scale()` from its API (and drops the
ability to see the remainder), but the only user was the unit tests. If
some code in the future needs an API that exposes the remainder, we can
add something to `BranchProbability`, but I find that unlikely.
llvm-svn: 207550
each line. This is particularly nice for tracking which run of
a particular pass over a particular function was slow.
This also required making the TimeValue string much more useful. First,
there is a standard format for writing out a date and time. Let's use
that rather than strings that would have to be parsed. Second, actually
output the nanosecond resolution that timevalue claims to have.
This is proving useful working on PR19499, so I figured it would be
generally useful to commit.
llvm-svn: 207385
behavior based on other files defining DEBUG_TYPE, which means it cannot
define DEBUG_TYPE at all. This is actually better IMO as it forces folks
to define relevant DEBUG_TYPEs for their files. However, it requires all
files that currently use DEBUG(...) to define a DEBUG_TYPE if they don't
already. I've updated all such files in LLVM and will do the same for
other upstream projects.
This still leaves one important change in how LLVM uses the DEBUG_TYPE
macro going forward: we need to only define the macro *after* header
files have been #include-ed. Previously, this wasn't possible because
Debug.h required the macro to be pre-defined. This commit removes that.
By defining DEBUG_TYPE after the includes two things are fixed:
- Header files that need to provide a DEBUG_TYPE for some inline code
can do so by defining the macro before their inline code and undef-ing
it afterward so the macro does not escape.
- We no longer have rampant ODR violations due to including headers with
different DEBUG_TYPE definitions. This may be mostly an academic
violation today, but with modules these types of violations are easy
to check for and potentially very relevant.
Where necessary to suppor headers with DEBUG_TYPE, I have moved the
definitions below the includes in this commit. I plan to move the rest
of the DEBUG_TYPE macros in LLVM in subsequent commits; this one is big
enough.
The comments in Debug.h, which were hilariously out of date already,
have been updated to reflect the recommended practice going forward.
llvm-svn: 206822
declaration. GCC 4.7 appears to get hopelessly confused by declaring
this function within a member function of a class template. Go figure.
llvm-svn: 206152
abstract interface. The only user of this functionality is the JIT
memory manager and it is quite happy to have a custom type here. This
removes a virtual function call and a lot of unnecessary abstraction
from the common case where this is just a *very* thin vaneer around
a call to malloc.
Hopefully still no functionality changed here. =]
llvm-svn: 206149
slabs rather than embedding a singly linked list in the slabs
themselves. This has a few advantages:
- Better utilization of the slab's memory by not wasting 16-bytes at the
front.
- Simpler allocation strategy by not having a struct packed at the
front.
- Avoids paging every allocated slab in just to traverse them for
deallocating or dumping stats.
The latter is the really nice part. Folks have complained from time to
time bitterly that tearing down a BumpPtrAllocator, even if it doesn't
run any destructors, pages in all of the memory allocated. Now it won't.
=]
Also resolves a FIXME with the scaling of the slab sizes. The scaling
now disregards specially sized slabs for allocations larger than the
threshold.
llvm-svn: 206147
Don't quote octal compatible strings if they are only two wide, they
aren't ambiguous.
This reverts commit r205857 which reverted r205857.
llvm-svn: 205914
YAMLIO would turn a BinaryRef into the string 0000000004000000.
However, the leading zero causes parsers to interpret it as being an
octal number instead of a hexadecimal one.
Instead, escape such strings as needed.
llvm-svn: 205839
This avoids an extra copy during decompression and avoids the use of
MemoryBuffer which is a weirdly esoteric device that includes unrelated
concepts like "file name" (its rather generic name is a bit misleading).
Similar refactoring of zlib::compress coming up.
llvm-svn: 205676
This generalises the object file type parsing to all Windows environments. This
is used by cygwin as well as MSVC environments for MCJIT. This also makes the
triple more similar to Chandler's suggestion of a separate field for the object
file format.
llvm-svn: 205219
parameters rather than runtime parameters.
There is only one user of these parameters and they are compile time for
that user. Making these compile time seems to better reflect their
intended usage as well.
llvm-svn: 205143
That causes references to them to be weak references which can collapse
to null if no definition is provided. We call these functions
unconditionally, so a definition *must* be provided. Make the
definitions provided in the .cpp file weak by re-declaring them as weak
just prior to defining them. This should keep compilers which cannot
attach the weak attribute to the definition happy while actually
resolving the symbols correctly during the link.
You might ask yourself upon reading this commit log: how did *any* of
this work before? Well, fun story. It turns out we have some code in
Support (BumpPtrAllocator) which both uses virtual dispatch and has
out-of-line vtables used by that virtual dispatch. If you move the
virtual dispatch into its header in *just* the right way, the optimizer
gets to devirtualize, and remove all references to the vtable. Then the
sad part: the references to this one vtable were the only strong symbol
uses in the support library for llvm-tblgen AFAICT. At least, after
doing something just like this, these symbols stopped getting their weak
definition and random calls to them would segfault instead.
Yay software.
llvm-svn: 205137
If the environment is unknown and no object file is provided, then assume an
"MSVC" environment, otherwise, set the environment to the object file format.
In the case that we have a known environment but a non-native file format for
Windows (COFF) which is used for MCJIT, then append the custom file format to
the triple as an additional component.
This fixes the MCJIT tests on Windows.
llvm-svn: 205130
This will fix cross-compiling buildbots (e.g. cygwin). This is in the same vein
as SVN r205070. Apply this to fix the cross-compiling scenario, even though the
preferred solution is to update the build system to normalize the embedded
triple rather than perform this at runtime every time. This is meant to tide us
over until that approach is fleshed out and applied.
llvm-svn: 205120
This adds a second implementation of the AArch64 architecture to LLVM,
accessible in parallel via the "arm64" triple. The plan over the
coming weeks & months is to merge the two into a single backend,
during which time thorough code review should naturally occur.
Everything will be easier with the target in-tree though, hence this
commit.
llvm-svn: 205090
BumpPtrAllocator significantly less strange by making it a simple
function of the number of slabs allocated rather than by making it
a recurrance. I *think* the previous behavior was essentially that the
size of the slabs would be doubled after the first 128 were allocated,
and then doubled again each time 64 more were allocated, but only if
every allocation packed perfectly into the slab size. If not, the wasted
space wouldn't be counted toward increasing the size, but allocations
over the size threshold *would*. And since the allocations over the size
threshold might be much larger than the slab size, this could have
somewhat surprising consequences where we rapidly grow the slab size.
This currently requires adding state to the allocator to track the
number of slabs currently allocated, but that isn't too bad. I'm
planning further changes to the allocator that will make this state fall
out even more naturally.
It still doesn't fully decouple the growth rate from the allocations
which are over the size threshold. That fix is coming later.
This specific fix will allow making the entire thing into a more
stateless device and lifting the parameters into template parameters
rather than runtime parameters.
llvm-svn: 204993
Construct a uniform Windows target triple nomenclature which is congruent to the
Linux counterpart. The old triples are normalised to the new canonical form.
This cleans up the long-standing issue of odd naming for various Windows
environments.
There are four different environments on Windows:
MSVC: The MS ABI, MSVCRT environment as defined by Microsoft
GNU: The MinGW32/MinGW32-W64 environment which uses MSVCRT and auxiliary libraries
Itanium: The MSVCRT environment + libc++ built with Itanium ABI
Cygnus: The Cygwin environment which uses custom libraries for everything
The following spellings are now written as:
i686-pc-win32 => i686-pc-windows-msvc
i686-pc-mingw32 => i686-pc-windows-gnu
i686-pc-cygwin => i686-pc-windows-cygnus
This should be sufficiently flexible to allow us to target other windows
environments in the future as necessary.
llvm-svn: 204977
Add a utility function to convert the Windows path separator to Unix style path
separators. This is used by a subsequent change in clang to enable the use of
Windows SDK headers on Linux.
llvm-svn: 203611
Before this patch the unix code for creating hardlinks was unused. The code
for creating symbolic links was implemented in lib/Support/LockFileManager.cpp
and the code for creating hard links in lib/Support/*/Path.inc.
The only use we have for these is in LockFileManager.cpp and it can use both
soft and hard links. Just have a create_link function that creates one or the
other depending on the platform.
llvm-svn: 203596
This is a preliminary setup change to support a renaming of Windows target
triples. Split the object file format information out of the environment into a
separate entity. Unfortunately, file format was previously treated as an
environment with an unknown OS. This is most obvious in the ARM subtarget where
the handling for macho on an arbitrary platform switches to AAPCS rather than
APCS (as per Apple's needs).
llvm-svn: 203160
This reverts commits r203136, r203137, and r203138.
This code doesn't build on Windows. Even on Vista+, Windows requires
elevated privileges to create a symlink. Therefore we can't use
symlinks in the compiler. We'll have to find another approach.
llvm-svn: 203143
There was a race where:
- The LockFileManager tries to own the lock file and fails.
- The other owner then releases and removes the lock file.
- The LockFileManager tries to read the owner info from the lock file but fails now.
In such a case have LockFileManager try to get ownership again, instead of error'ing out.
llvm-svn: 203138
Hard links do not work on SMB network directories, and it causes us to fail
to build clang module files if the module cache is in such a directory.
rdar://15944959
llvm-svn: 203137
This compiles with no changes to clang/lld/lldb with MSVC and includes
overloads to various functions which are used by those projects and llvm
which have OwningPtr's as parameters. This should allow out of tree
projects some time to move. There are also no changes to libs/Target,
which should help out of tree targets have time to move, if necessary.
llvm-svn: 203083
When using a //net/ path, we were transforming the trailing / into a '.'
when the path was just the root path and we were iterating backwards.
Forwards iteration and other kinds of root path (C:\, /) were already
correct.
llvm-svn: 202999
This will allow external callers of these functions to switch over time
rather than forcing a breaking change all a once. These particular
functions were determined by building clang/lld/lldb.
llvm-svn: 202959
a bit surprising, as the class is almost entirely abstracted away from
any particular IR, however it encodes the comparsion predicates which
mutate ranges as ICmp predicate codes. This is reasonable as they're
used for both instructions and constants. Thus, it belongs in the IR
library with instructions and constants.
llvm-svn: 202838
Breaks the MSVC build.
DataStream.cpp(44): error C2552: 'llvm::Statistic::Value' : non-aggregates cannot be initialized with initializer list
llvm-svn: 202731
With C++11 we finally have a standardized way to specify atomic operations. Use
them to replace the existing custom implemention. Sadly the translation is not
entirely trivial as std::atomic allows more fine-grained control over the
atomicity. I tried to preserve the old semantics as well as possible.
Differential Revision: http://llvm-reviews.chandlerc.com/D2915
llvm-svn: 202730
lib/Support/RWMutex.cpp contains an implementation of RWMutex that
uses pthread_rwlock, but when pthread_rwlock is not available (such as
under NaCl, when using newlib), it silently falls back to using the
no-op definition in lib/Support/Unix/RWMutex.inc, which is not
thread-safe.
Fix this case to be thread-safe by using a normal mutex.
Differential Revision: http://llvm-reviews.chandlerc.com/D2892
llvm-svn: 202570
Tools that use the CommandLine library currently exit with an error
when invoked with -version or -help. This is unusual and non-standard,
so we'll fix them to exit successfully instead.
I don't expect that anyone relies on the current behaviour, so this
should be a fairly safe change.
llvm-svn: 202530
target_link_libraries(INTERFACE) doesn't bring inter-target dependencies in add_library,
although final targets have dependencies to whole dependent libraries.
It makes most libraries can be built in parallel.
target_link_libraries(PRIVATE) is used to shaared library.
Each dependent library is linked to the target.so, and its user will not see its grandchildren.
For example,
- libclang.so has sufficient libclang*.a(s).
- c-index-test requires just only libclang.so.
FIXME: lld is tweaked minimally. Adding INTERFACE in each library would be better thing.
llvm-svn: 202241
After this I will set the default back to F_None. The advantage is that
before this patch forgetting to set F_Binary would corrupt a file on windows.
Forgetting to set F_Text produces one that cannot be read in notepad, which
is a better failure mode :-)
llvm-svn: 202052
Before this patch they would take an boolean argument to say if the path
already existed. This was redundant with the returned error_code which is able
to represent that. This allowed for callers to incorrectly check only the
existed flag instead of first checking the error code.
Instead, pass in a boolean flag to say if the previous (non-)existence should be
an error or not.
Callers of the of the old simple versions are not affected. They still ignore
the previous (non-)existence as they did before.
llvm-svn: 201979
The LLVMSupport library implementation consolidates all dependencies on
system libraries. Move the logic gathering system libraries out of
'cmake/modules/LLVM-Config.cmake' and into 'lib/Support/CMakeLists.txt'.
Use the target_link_libraries() command there to tell CMake about the
link dependencies of the LLVMSupport implementation. CMake will
automatically propagate this to all targets that link LLVMSupport
directly or indirectly.
We still need to build knowledge of system library dependencies into
'llvm-config'. Store the list of libraries needed in a property on
LLVMSupport and teach 'tools/llvm-config/CMakeLists.txt' to retrieve it
from there.
Drop all calls to 'link_system_libs' and 'get_system_libs' from our
CMake code. Replace their implementations with a warning that explains
the calls are no longer necessary. Also drop from 'LLVMConfig.cmake'
the HAVE_* and related variables that were published there only to allow
'get_system_libs' to run outside our build process.
Contributed by Brad King.
llvm-svn: 201969
This is an optimistic version of create_diretories: it tries to create the
directory first and looks at the parent only if that fails.
Running strace on "mkdir -p" shows that it is pessimistic, calling mkdir on
every element of the path. We could implement that if needed.
In any case, with both strategies there is no reason to call stat, just check
the return of mkdir.
llvm-svn: 201347
