This fixes printing long values that might reside in CIE and FDE,
including offsets, lengths, and addresses.
Differential Revision: https://reviews.llvm.org/D73887
The condition was not accurate enough and could interpret some FDEs in
.eh_frame or 64-bit DWARF .debug_frame sections as CIEs. Even though
such FDEs are unlikely in a normal situation, the wrong interpretation
could hide an issue in a buggy generator.
Differential Revision: https://reviews.llvm.org/D73886
It fixes now what 1c991f907a43d7a56e82dd67a76514843841ed9a tried to fix.
(A test case failture on 32-bit Arch Linux)
On 32-bit hosts it still fails (because it truncates the `Pos` value to 32 bits).
It seems happens because of `sizeof` that returns `size_t`, which has a
different size on 32/64 bits hosts.
I've tested on a 32-bit host and verified that relocation-errors.test test and
other LLVM tools tests pass now.
The LLJIT::MachOPlatformSupport class used to unconditionally attempt to
register __objc_selrefs and __objc_classlist sections. If libobjc had not
been loaded this resulted in an assertion, even if no objc sections were
actually present. This patch replaces this unconditional registration with
a check that no objce sections are present if libobjc has not been loaded.
This will allow clients to use MachOPlatform with LLJIT without requiring
libobjc for non-objc code.
After structurization, some phi nodes can have a single incoming edge
and can be simplified away. This change runs a simplify query on all
phis that are either modified or added by the structurizer. This also
moves some phis closer to their use as a side benefit.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D75500
The original code could create a bitcast from f64 to i64 and back
on 32-bit targets. This was only working because getBitcast was
able to fold the casts away to avoid leaving the illegal i64 type.
Now we handle the scalar case directly by broadcasting using the
scalar type as the element type. Then bitcasting to the final VT.
This works since we ensure the scalar type is the same size as
the final VT element type. No more casts to i64.
For the vector case, we cast to VT or subvector of VT. And then
do the broadcast.
I think this all matches what we generated before, just in a more
readable way.
Summary:
Move the check for malformed REBASE_OPCODE_ADD_ADDR_IMM_SCALED and
BIND_OPCODE_DO_BIND_ADD_ADDR_IMM_SCALED opcodes after the immediate
has been applied to the SegmentOffset. This fixes specious errors
where SegmentOffset is pointing between two sections when trying to
correct the SegmentOffset value.
Update the regression tests to verify the proper error message.
Reviewers: pete, ab, lhames, steven_wu, jhenderson
Reviewed By: pete
Subscribers: hiraditya, dexonsmith, rupprecht, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D75629
A DWARFSectionKind is read from input. It is not validated on parsing,
so an unexpected value may result in reaching llvm_unreachable() in
DWARFUnitIndex::getColumnHeader() when dumping the index section.
Differential Revision: https://reviews.llvm.org/D75609
PowerPC hits an assertion due to somewhat the same reason as https://reviews.llvm.org/D70975.
Though there are already some hack, it still failed with some case, when the operand 0 is NOT
a const fp, it is another fma that with const fp. And that const fp is negated which result in multi-uses.
A better fix is to check the uses of the negated const fp. If there are already use of its negated
value, we will have benefit as no extra Node is added.
Differential revision: https://reviews.llvm.org/D75501
YAML files were not being run during lit testing as there was no lit.local.cfg file. Once this was fixed, some buildbots would fail due to a StringRef that pointed to a std::string inside of a temporary llvm::Triple object. These issues are fixed here by making a local triple object that stays around long enough so the StringRef points to valid data. Fixed memory sanitizer bot bugs as well.
Differential Revision: https://reviews.llvm.org/D75390
Summary: X86 can reduce the bytes of NOP by padding instructions with prefixes to get a better peformance in some cases. So a private member function `determinePaddingPrefix` is added to determine which prefix is the most suitable.
Reviewers: annita.zhang, reames, MaskRay, craig.topper, LuoYuanke, jyknight
Reviewed By: reames
Subscribers: llvm-commits, dexonsmith, hiraditya
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D75357
If we have an explicit align directive, we currently default to emitting nops to fill the space. As discussed in the context of the prefix padding work for branch alignment (D72225), we're allowed to play other tricks such as extending the size of previous instructions instead.
This patch will convert near jumps to far jumps if doing so decreases the number of bytes of nops needed for a following align. It does so as a post-pass after relaxation is complete. It intentionally works without moving any labels or doing anything which might require another round of relaxation.
The point of this patch is mainly to mock out the approach. The optimization implemented is real, and possibly useful, but the main point is to demonstrate an approach for implementing such "pad previous instruction" approaches. The key notion in this patch is to treat padding previous instructions as an optional optimization, not as a core part of relaxation. The benefit to this is that we avoid the potential concern about increasing the distance between two labels and thus causing further potentially non-local code grown due to relaxation. The downside is that we may miss some opportunities to avoid nops.
For the moment, this patch only implements a small set of existing relaxations.. Assuming the approach is satisfactory, I plan to extend this to a broader set of instructions where there are obvious "relaxations" which are roughly performance equivalent.
Note that this patch *doesn't* change which instructions are relaxable. We may wish to explore that separately to increase optimization opportunity, but I figured that deserved it's own separate discussion.
There are possible downsides to this optimization (and all "pad previous instruction" variants). The major two are potentially increasing instruction fetch and perturbing uop caching. (i.e. the usual alignment risks) Specifically:
* If we pad an instruction such that it crosses a fetch window (16 bytes on modern X86-64), we may cause the decoder to have to trigger a fetch it wouldn't have otherwise. This can effect both decode speed, and icache pressure.
* Intel's uop caching have particular restrictions on instruction combinations which can fit in a particular way. By moving around instructions, we can both cause misses an change misses into hits. Many of the most painful cases are around branch density, so I don't expect this to be too bad on the whole.
On the whole, I expect to see small swings (i.e. the typical alignment change problem), but nothing major or systematic in either direction.
Differential Revision: https://reviews.llvm.org/D75203
Summary: Decompose callThroughToSymbol() into findReexport(), resolveSymbol(), notifyResolved() and reportCallThroughError(). This allows derived classes to reuse the functionality while adding their own code in between.
Reviewers: lhames
Reviewed By: lhames
Subscribers: hiraditya, steven_wu, dexonsmith, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D75084
Previously we tried to promote these to xmm/ymm/zmm by promoting
in the X86CallingConv.td file. But this breaks when we run out
of xmm/ymm/zmm registers and need to fall back to memory. We end
up trying to create a non-sensical scalar to vector. This lead
to an assertion. The new tests in avx512-calling-conv.ll all
trigger this assertion.
Since we really want to treat these types like we do on avx2,
it seems better to promote them before the calling convention
code gets involved. Except when the calling convention is one
that passes the vXi1 type in a k register.
The changes in avx512-regcall-Mask.ll are because we indicated
that xmm/ymm/zmm types should be passed indirectly for the
Win64 ABI before we go to the common lines that promoted the
vXi1 types. This caused the promoted types to be picked up by
the default calling convention code. Now we promote them earlier
so they get passed indirectly as though they were xmm/ymm/zmm.
Differential Revision: https://reviews.llvm.org/D75154
Currently dsymutil when generating accelerator tables will attempt to strip the template parameters from names for subroutines.
For some overload operators which contain < in their names e.g. operator< the current method ends up stripping the operator name as well,
we just end up with the name operator in the table for each case.
Differential Revision: https://reviews.llvm.org/D75545
I believe this is the correct fix for D75506 rather than disabling all commuting. We can still commute the remaining two sources.
Differential Revision:m https://reviews.llvm.org/D75526
InstSimplify can fold icmps of gep where the base pointers are the
same and the offsets are constant. It does so by constructing a
constant expression icmp and assumes that it gets folded -- but
this doesn't actually happen, because GEP expressions can usually
only be folded by the target-dependent constant folding layer.
As such, we need to explicitly invoke it here.
Differential Revision: https://reviews.llvm.org/D75407
Create a wider source vector, and unmerge with dead defs like the
legalizer. The legalization handling for G_EXTRACT is incomplete, and
it's preferrable to keep everything in 32-bit pieces.
We should probably start moving these functions into utils, since we
have a growing number of places that do almost the same thing.
Since this is still largely relying on the DAG argument type lowering
code, this has inherited the problem where i16 vectors have a
different ABI on targets with and without legal i16. Switch to using a
target with legal i16, so the i16 vector argument tests are more
useful.
SLH had two functions named isDataInvariant and isDataInvariantLoad that
checked whether the passed instruction was data invariant. For some instructions,
if the EFLAGS were dead then they were considered data invariant, otherwise
they were not considered data invariant.
In this patch, I extracted that EFLAGS liveness check and made it
explicit at every call to isDataInvariant and isDataInvariantLoad.
This makes the isDataInvariant function behave more generally
and preserves the liveness check behavior that SLH would like to have.
Tested via llvm-lit llvm/test/CodeGen/X86/speculative-load-hardening*
This is the first step in making these two data invariance checks
available for non-SLH passes. The second step is to move the passes from
SLH to X86InstrInfo.cpp. I'll follow up with a patch that does that.
Differential Revision: https://reviews.llvm.org/D70283
https://reviews.llvm.org/D42848 only handled CFA related cfi directives but
didn't handle CSR related cfi. The patch adds the CSR part. Basically it reuses
the framework created in D42848. For each basicblock, the patch tracks which
CSR set have been saved at its CFG predecessors's exits, and compare the CSR
set with the set at its previous basicblock's exit (The previous block is the
block laid before the current block). If the saved CSR set at its previous
basicblock's exit is larger, .cfi_restore will be inserted.
The patch also generates proper .cfi_restore in epilogue to make sure the
saved CSR set is consistent for the incoming edges of each block.
Differential Revision: https://reviews.llvm.org/D74303
As the test case shows if there is an ExtractValueInst in the Ret block, function dupRetToEnableTailCallOpts can't duplicate it into the block containing call. So later no tail call is generated in CodeGen.
This patch adds the ExtractValueInst handling code in function dupRetToEnableTailCallOpts and FoldReturnIntoUncondBranch, and later tail call can be generated for this case.
Differential Revision: https://reviews.llvm.org/D74242
This teaches Loop Strength Reduction the details about masked load and
store address operands, so that it can have a better time optimising
them as it would for normal loads and stores.
Differential Revision: https://reviews.llvm.org/D75371
This reverts commit 8d41f1a02369537cae1a7d00c0fa717fc3aca575.
This change broke the MSan buildbots - see comments in
https://reviews.llvm.org/D75390 for more information.
This makes sure that the constant expression bitcast goes through
target-dependent constant folding, and thus avoids an additional
iteration of InstCombine.
Spin-off from D75407. As described there, ConstantFoldConstant()
currently returns null for non-ConstantExpr/ConstantVector inputs,
but otherwise always returns non-null, independently of whether
any folding has happened or not.
This is confusing and makes consumer code more complicated.
I would expect either that ConstantFoldConstant() returns only if
it actually folded something, or that it always returns non-null.
I'm going to the latter possibility here, which appears to be more
useful considering existing usage.
Differential Revision: https://reviews.llvm.org/D75543
