Previously we extended v2i1 to v2f64 and then tried to use cvtuqq2pd/cvtqq2pd, but that only works with avx512dq. So we ended up scalarizing it. Now we widen to v4i1 first and extend to v4i32.
llvm-svn: 321420
Currently llvm-mc ignores COMDATs whose names are numbers,
for example following code:
.section .foo,"G",@progbits,123,comdat
would produce no COMDATs at all.
Patch fixes the issue.
Differential revision: https://reviews.llvm.org/D41552
llvm-svn: 321419
This moves the combine for turning ANDs into shuffle with zero out of SimplifyVBinOps and places it only in visitAND below the reassociate handling. This fixes the specific case I noticed where we failed to combine two ands with constants.
llvm-svn: 321417
By following the single predecessors of the predecessors of the call
site, we do not need to restrict the control flow.
Reviewed By: junbuml, davide
Differential Revision: https://reviews.llvm.org/D40729
llvm-svn: 321413
Immediately after it is created we check if its equal to another EVT. Then we inconsistently use one or the other variables in the code below.
Instead do the equality check directly on the getValueType result and remove the variable. Use the origina VT variable throughout the remaining code.
llvm-svn: 321406
This code was originally removed and replace with an assertion
because believed unnecessary. It turns out there was simply
no test coverage for this case, and the constant folder doesn't
yet know about patterns like `br undef %label1, %label2`.
Presumably at some point the constant folder might learn about
these patterns, but it's a broader change.
A testcase will be added to make sure this doesn't regress again
in the future.
Fixes PR35723.
llvm-svn: 321402
getOperand returns an SDValue that contains the node and the result number. There is no guarantee that the result number if 0. By using the -> operator we are calling SDNode::getValueType rather than SDValue::getValueType. This requires supplying a result number and we shouldn't assume it was 0.
I don't have a test case. Just noticed while cleaning up some other code and saw that it occurred in other places.
llvm-svn: 321397
BaseIndexOffset supercedes findBaseOffset analysis save only Constant
Pool addresses. Migrate analysis to BaseIndexOffset.
Relanding after correcting base address matching check.
llvm-svn: 321389
Summary: Correctly handle files ignored by svn (such as .o files,
which are ignored by default) by adding "--no-ignore" flag to "svn
status" and "svn add".
Differential Revision: https://reviews.llvm.org/D41404
llvm-svn: 321388
Previously, taking the address for an alias would result in:
"Symbol not found in table index space"
Increase test coverage for weak aliases.
This code should be more efficient too as it avoids building
the `IsAddressTaken` set.
Differential Revision: https://reviews.llvm.org/D41510
llvm-svn: 321384
Summary:
Make MemorySSA allow reordering of two loads that may alias, when one is volatile.
This makes MemorySSA less conservative and behaving the same as the AliasSetTracker.
For more context, see D16875.
LLVM language reference: "The optimizers must not change the number of volatile operations or change their order of execution relative to other volatile operations. The optimizers may change the order of volatile operations relative to non-volatile operations. This is not Java’s “volatile” and has no cross-thread synchronization behavior."
Reviewers: george.burgess.iv, dberlin
Subscribers: sanjoy, reames, hfinkel, llvm-commits, Prazek
Differential Revision: https://reviews.llvm.org/D41525
llvm-svn: 321382
If after if-conversion, most of the instructions in this new BB construct a long and slow dependence chain, it may be slower than cmp/branch, even if the branch has a high miss rate, because the control dependence is transformed into data dependence, and control dependence can be speculated, and thus, the second part can execute in parallel with the first part on modern OOO processor.
This patch checks for the long dependence chain, and give up if-conversion if find one.
Differential Revision: https://reviews.llvm.org/D39352
llvm-svn: 321377
In https://reviews.llvm.org/rL321077 and https://reviews.llvm.org/D41231 I fixed a regression in the c-api which prevented the pruning from being *effectively* disabled.
However this approach, helpfully recommended by @labath, is cleaner.
It is also nice to remove the weasel words about effectively disabling from the api comments.
Differential Revision: https://reviews.llvm.org/D41497
llvm-svn: 321376
Re-land r321234. It had to be reverted because it broke the shared
library build. The shared library build broke because there was a
missing LLVMBuild dependency from lib/Passes (which calls
TargetMachine::getTargetIRAnalysis) to lib/Target. As far as I can
tell, this problem was always there but was somehow masked
before (perhaps because TargetMachine::getTargetIRAnalysis was a
virtual function).
Original commit message:
This makes the TargetMachine interface a bit simpler. We still need
the std::function in TargetIRAnalysis to avoid having to add a
dependency from Analysis to Target.
See discussion:
http://lists.llvm.org/pipermail/llvm-dev/2017-December/119749.html
I avoided adding all of the backend owners to this review since the
change is simple, but let me know if you feel differently about this.
Reviewers: echristo, MatzeB, hfinkel
Reviewed By: hfinkel
Subscribers: jholewinski, jfb, arsenm, dschuff, mcrosier, sdardis, nemanjai, nhaehnle, javed.absar, sbc100, jgravelle-google, aheejin, kbarton, llvm-commits
Differential Revision: https://reviews.llvm.org/D41464
llvm-svn: 321375
This seems to improve X86's ability to match this into an address computation. Otherwise the other operand gets assigned to the base register and the stack pointer + frame index ends up in the index register. But index registers can't encode ESP/RSP so we end up having to move it into another register to meet the constraint.
I could try to improve the address matcher in X86, but swapping the producer seemed easier. Several other places already have the operands in this order so this is at least consistent.
llvm-svn: 321370
Despite what the comment said there isn't better codegen for 512-bit vectors. The 128/256/512 bit implementation jus stores to memory and loads an element. There's no advantage to doing that with a larger size. In fact in many cases it causes a stack realignment and generates worse code.
llvm-svn: 321369
Currently, inline cost model considers a binary operator as free only if both
its operands are constants. Some simple cases are missing such as a + 0, a - a,
etc. This patch modifies visitBinaryOperator() to call SimplifyBinOp() without
going through simplifyInstruction() to get rid of the constant restriction.
Thus, visitAnd() and visitOr() are not needed.
Differential Revision: https://reviews.llvm.org/D41494
llvm-svn: 321366
Pointer constants are pretty rare, since we usually represent them as
integer constants and then cast to pointer. One notable exception is the
null pointer constant, which is represented directly as a G_CONSTANT 0
with pointer type. Mark it as legal and make sure it is selected like
any other integer constant.
llvm-svn: 321354
inlined subroutines for a given address.
This is essentially the hot path of llvm-symbolizer when extracting
inlined frames during symbolization. Previously, we would read every
subprogram and every inlined subroutine, building a std::map across the
entire PC space to the best DIE, and then do only a handful of queries
as we symbolized a backtrace. A huge fraction of the time was spent
building the map itself.
This patch changes it two a two-level system. First, we just build a map
from PC-interval to DWARF subprograms. These are required to be disjoint
and so constructing this is pretty easy. Second, we build a map *just*
for the inlined subroutines within the subprogram containing the query
address. This allows us to look at far fewer DIEs and build a *much*
smaller set of cached maps in the llvm-symbolizer case where only a few
address get symbolized during the entire run.
It also builds both interval maps in a very different way. It constructs
a single flat vector of pairs that maps from offset -> index. The
indices point into collections of DIE objects, but can also be
"tombstones" (-1) to mark gaps. In the case of subprograms, this mostly
just simplifies the data structure a bit. For inlined subroutines,
because we carefully split them as we build the map, we end up in many
cases having no holes and not having to store both start and stop
offsets.
Finally, the PC ranges for the inlined subroutines are compressed into
32-bits by making them relative to the base PC of the outer subprogram.
This means that if you have a single function body with over 2gb of
executable code in it, we will stop mapping address past the first 2gb
of that function into inlined subroutines and just give you the
subprogram. This doesn't seem like a problem. ;]
All of this combines to make llvm-symbolizer *well* over 2x faster for
symbolizing backtraces out of LLVM's unittests. Death-test heavy unit
tests are running >2x faster. I'm still going to look at completely
disabling symbolization there, but figured while I had a good benchmark
we should make symbolization a bit better.
Sadly, the logic to build the flat interval map for the inlined
subroutines is fairly complex. I'm not super happy about this and
welcome any simplifying suggestions.
Huge thanks to Dave Blaikie who helped walk me through what the various
things I needed to do in DWARF to make this work.
Differential Revision: https://reviews.llvm.org/D40987
llvm-svn: 321345
Previously prefetch was only considered legal if sse was enabled, but it should be supported with 3dnow as well.
The prfchw flag now imply at least some form of prefetch without the write hint is available, either the sse or 3dnow version. This is true even if 3dnow and sse are explicitly disabled.
Similarly prefetchwt1 feature implies availability of prefetchw and the the prefetcht0/1/2/nta instructions. This way we can support _MM_HINT_ET0 using prefetchw and _MM_HINT_ET1 with prefetchwt1. And its assumed that if we have levels for the write hint we would have levels for the non-write hint, thus why we enable the sse prefetch instructions.
I believe this behavior is consistent with gcc. I've updated the prefetch.ll to test all of these combinations.
llvm-svn: 321335
The penalty is currently getting applied in a bunch of places where it
doesn't make sense, like bitcasts (which are free) and calls (which
were getting the call penalty applied twice). Instead, just apply the
penalty to binary operators and floating-point casts.
While I'm here, also fix getFPOpCost() to do the right thing in more
cases, so we don't have to dig into function attributes.
Differential Revision: https://reviews.llvm.org/D41522
llvm-svn: 321332
Summary:
This replaces calls to getEntryCount().hasValue() with hasProfileData
that does the same thing. This refactoring is useful to do before adding
synthetic function entry counts but also a useful cleanup IMO even
otherwise. I have used hasProfileData instead of hasRealProfileData as
David had earlier suggested since I think profile implies "real" and I
use the phrase "synthetic entry count" and not "synthetic profile count"
but I am fine calling it hasRealProfileData if you prefer.
Reviewers: davidxl, silvas
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D41461
llvm-svn: 321331
Summary:
Add an additional bit to ModRefInfo, ModRefInfo::Must, to be cleared for known must aliases.
Shift existing Mod/Ref/ModRef values to include an additional most
significant bit. Update wrappers that modify ModRefInfo values to
reflect the change.
Notes:
* ModRefInfo::Must is almost entirely cleared in the AAResults methods, the remaining changes are trying to preserve it.
* Only some small changes to make custom AA passes set ModRefInfo::Must (BasicAA).
* GlobalsModRef already declares a bit, who's meaning overlaps with the most significant bit in ModRefInfo (MayReadAnyGlobal). No changes to shift the value of MayReadAnyGlobal (see AlignedMap). FunctionInfo.getModRef() ajusts most significant bit so correctness is preserved, but the Must info is lost.
* There are cases where the ModRefInfo::Must is not set, e.g. 2 calls that only read will return ModRefInfo::NoModRef, though they may read from exactly the same location.
Reviewers: dberlin, hfinkel, george.burgess.iv
Subscribers: llvm-commits, sanjoy
Differential Revision: https://reviews.llvm.org/D38862
llvm-svn: 321309
This should only affect what we do for v8i16. Previously we went to v8i64, but if we have VLX we only need v8i32. This prevents an unnecessary zmm usage.
llvm-svn: 321303
