Summary:
The large code model allows code and data segments to exceed 2GB, which
means that some symbol references may require a displacement that cannot
be encoded as a displacement from RIP. The large PIC model even relaxes
the assumption that the GOT itself is within 2GB of all code. Therefore,
we need a special code sequence to materialize it:
.LtmpN:
leaq .LtmpN(%rip), %rbx
movabsq $_GLOBAL_OFFSET_TABLE_-.LtmpN, %rax # Scratch
addq %rax, %rbx # GOT base reg
From that, non-local references go through the GOT base register instead
of being PC-relative loads. Local references typically use GOTOFF
symbols, like this:
movq extern_gv@GOT(%rbx), %rax
movq local_gv@GOTOFF(%rbx), %rax
All calls end up being indirect:
movabsq $local_fn@GOTOFF, %rax
addq %rbx, %rax
callq *%rax
The medium code model retains the assumption that the code segment is
less than 2GB, so calls are once again direct, and the RIP-relative
loads can be used to access the GOT. Materializing the GOT is easy:
leaq _GLOBAL_OFFSET_TABLE_(%rip), %rbx # GOT base reg
DSO local data accesses will use it:
movq local_gv@GOTOFF(%rbx), %rax
Non-local data accesses will use RIP-relative addressing, which means we
may not always need to materialize the GOT base:
movq extern_gv@GOTPCREL(%rip), %rax
Direct calls are basically the same as they are in the small code model:
They use direct, PC-relative addressing, and the PLT is used for calls
to non-local functions.
This patch adds reasonably comprehensive testing of LEA, but there are
lots of interesting folding opportunities that are unimplemented.
Reviewers: chandlerc, echristo
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D47211
llvm-svn: 335297
Summary:
A reprise of D25849.
This crash was found through fuzzing some time ago and was documented in PR28879.
No check for load size has been added due to the following tests:
- Transforms/GVN/invariant.group.ll
- Transforms/GVN/pr10820.ll
These tests expect load sizes that are not a multiple of eight.
Thanks to @davide for the original patch.
Reviewers: nlopes, davide, RKSimon, reames, efriedma
Reviewed By: efriedma
Subscribers: davide, llvm-commits, Prazek
Differential Revision: https://reviews.llvm.org/D48330
llvm-svn: 335294
After the recent refactoring that introduced parallel handling of
different object, the binary holder became unique per object file. This
defeats its optimization of caching archives, leading to an archive
being opened for every binary it contains. This is obviously unfortunate
and will need to be refactored soon.
Luckily in practice, the impact of this is limited as most files are
mmap'ed instead of memcopy'd. There's a caveat however: when the memory
buffer requires a null terminator and it's a multiple of the page size,
we allocate instead of mmap'ing. If this happens for a static archive,
we end up with N copies of it in memory, where N is the number of
objects in the archive, leading to exuberant memory usage. This provided
a stopgap solution to ensure that all the files it loads are mmap in
memory by removing the requirement for a terminating null byte.
Differential revision: https://reviews.llvm.org/D48397
llvm-svn: 335293
Summary:
This initiates a discussion on changing Polly accordingly while re-applying r335197 (D48338).
I have never worked on Polly. The proposed change to param_div_div_div_2.ll is not educated, but just patterns that match the output.
All LLVM files are already reviewed in D48338.
Reviewers: jdoerfert, bollu, efriedma
Subscribers: jlebar, sanjoy, hiraditya, llvm-commits, bixia
Differential Revision: https://reviews.llvm.org/D48453
llvm-svn: 335292
Summary:
GCC and the binutils COFF linker do comdats differently from MSVC.
If we want to be ABI compatible, we have to do what they do, which is to
emit unique section names like ".text$_Z3foov" instead of short section
names like ".text". Otherwise, the binutils linker gets confused and
reports multiple definition errors when two object files from GCC and
Clang containing the same inline function are linked together.
The best description of the issue is probably at
https://github.com/Alexpux/MINGW-packages/issues/1677, we don't seem to
have a good one in our tracker.
I fixed up the .pdata and .xdata sections needed everywhere other than
32-bit x86. GCC doesn't use associative comdats for those, it appears to
rely on the section name.
Reviewers: smeenai, compnerd, mstorsjo, martell, mati865
Subscribers: llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D48402
llvm-svn: 335286
This is the simplest case from PR37806:
https://bugs.llvm.org/show_bug.cgi?id=37806
If we have a common variable operand used in a pair of binops with vector constants
that are vector selected together, then we can constant shuffle the constant vectors
to eliminate the shuffle instruction.
This has some tricky parts that are hopefully addressed in the tests and their
respective comments:
1. If the shuffle mask contains an undef element, then that lane of the result is
undef:
http://llvm.org/docs/LangRef.html#shufflevector-instruction
Therefore, we can replace the constant in that lane with an undef value except
for div/rem. With div/rem, an undef in the divisor would cause the whole op to
be undef. So I'm using the same hack as in D47686 - replace the undefs with '1'.
2. Intersect the wrapping and FMF of the original binops for the new binop. There
should be no extra poison or fast-math potential in the new binop that wasn't
possible in the original code.
3. Disregard other uses. Given that we're eliminating uses (shortening the
dependency chain), I think that's always the right IR canonicalization. But
I purposely chose the udiv test to demonstrate the scenario where both
intermediate values have other uses because that seems likely worse for
codegen with an expensive math op. This seems like a very rare possibility to
me, so I don't think it requires a backend patch first.
Differential Revision: https://reviews.llvm.org/D48401
llvm-svn: 335283
Update AMDGPU assembler syntax behind the code-object-v3 feature:
* Replace/rename most AMDGPU assembler directives/symbols and document them.
* Provide more diagnostics (e.g. values out of range, missing values, repeated
values).
* Provide path for backwards compatibility, even with underlying descriptor
changes.
Differential Revision: https://reviews.llvm.org/D47736
llvm-svn: 335281
This reverts commit r335206.
As discussed here: https://reviews.llvm.org/rL333740, a fix will come
tomorrow. In the meanwhile, revert this to fix some bots.
llvm-svn: 335272
BlockWaitcntProcessedSet was not being cleared between calls, so it was
producing incorrect counts in cases where MBB addresses happened to coincide
across multiple calls.
Differential Revision: https://reviews.llvm.org/D48391
llvm-svn: 335268
and everything that comes with it from implementation
and v3 header files.
Leave definition in v2 header files for backwards
compatibility.
Differential Revision: https://reviews.llvm.org/D48191
llvm-svn: 335267
Summary:
The logic for handling the sinking of COPY instructions was generating
different code when building with debug flags.
The original code did not take into consideration debug instructions. This
resulted in the registers in the DBG_VALUE instructions being treated as used,
and prevented the COPY from being sunk. This patch avoids analyzing debug
instructions when trying to sink COPY instructions.
This patch also creates a routine from the code in MachineSinking::SinkInstruction to
perform the logic of sinking an instruction along with its debug instructions.
This functionality is used in multiple places, including the code for sinking COPY instrs.
Reviewers: junbuml, javed.absar, MatzeB, bjope
Reviewed By: bjope
Subscribers: aprantl, probinson, thegameg, jonpa, bjope, vsk, kristof.beyls, JDevlieghere, llvm-commits
Tags: #debug-info
Differential Revision: https://reviews.llvm.org/D45637
llvm-svn: 335264
The previous code worked with vectors, but it failed when the
vector constants contained undef elements.
The matchers handle those cases.
llvm-svn: 335262
This is outwardly NFC from what I can tell, but it should be more efficient
to simplify first (despite the name, SimplifyAssociativeOrCommutative does
not actually simplify as InstSimplify does - it creates/morphs instructions).
This should make it easier to refactor duplicated code that runs for all binops.
llvm-svn: 335258
The new IR fixes a mismatch in the final extractelement for the i32 intrinsics. Previously we extracted a 64-bit element even though we only wanted 32 bits.
SimplifyDemandedElts isn't able to make FP elements undef now and the shuffle mask I used prevents the use of horizontal add we had before. Not sure we should have been using horizontal add anyway. It's implemented on Intel with two port 5 shuffles and an add. So we have on less shuffle now, but an additional instruction to decode.
Differential Revision: https://reviews.llvm.org/D48347
llvm-svn: 335256
This reverts commit d8f57105010cc7e78026e511d5def873fc91e0e7.
Original Commit:
Author: Haicheng Wu <haicheng@codeaurora.org>
Date: Sun Feb 18 13:51:33 2018 +0000
[AArch64] Coalesce Copy Zero during instruction selection
Add special case for copy of zero to avoid a double copy.
Differential Revision: https://reviews.llvm.org/D36104
Author's intention is to remove a BB that has one mov instruction. In
order to do that, d8f571050 pessmizes MachineSinking by introducing a
copy, such that mov instruction is NOT moved to the BB. Optimization
downstream gets rid of the BB with only mov instruction. This works well
if we have only one fall through branch as there is only one "extra"
mov instruction.
If we have multiple fall throughs, we will have a lot of redundant movs.
In such a case, it's better to have this BB which has one mov instruction.
This is causing degradation in jpeg, fft and other codebases. I believe
if we want to remove a BB with only one branch instruction, we should not
pessimize Machine Sinking at all, and find some other solution.
llvm-svn: 335251
Allowed folding for "and/or" binops with non-constant operand if
arguments of select are 0/-1 values.
Normally this code with "and" opcode does not get to a DAG combiner
and simplified yet in the InstCombine. However AMDGPU produces it
during lowering and InstCombine has no chance to optimize it out.
In turn the same pattern with "or" opcode can reach DAG.
Differential Revision: https://reviews.llvm.org/D48301
llvm-svn: 335250
This option allows codegen (such as DAGCombine or MI scheduling) to use alias
analysis information, which can help with the codegen on in-order cpu's,
especially machine scheduling. Here I have done things the same way as AArch64,
adding a subtarget feature to enable this for specific cores, and enabled it for
the R52 where we have a schedule to make use of it.
Differential Revision: https://reviews.llvm.org/D48074
llvm-svn: 335249
Summary:
When expanding the PseudoTail in expandFunctionCall() we were using X6
to save the return address. Since this is a tail call the return
address is not needed, this patch replaces it with X0 to be ignored.
This matches the behaviour listed in the ISA V2.2 document page 110.
tail offset -----> jalr x0, x6, offset
GCC exhibits the same behavior.
Reviewers: apazos, asb, mgrang
Reviewed By: asb
Subscribers: rbar, johnrusso, simoncook, niosHD, kito-cheng, shiva0217, zzheng, edward-jones, rogfer01
Differential Revision: https://reviews.llvm.org/D48343
llvm-svn: 335239
This should help in lowering the following four intrinsics:
_mm256_cvtepi32_epi8
_mm256_cvtepi64_epi16
_mm256_cvtepi64_epi8
_mm512_cvtepi64_epi8
Differential Revision: https://reviews.llvm.org/D46957
llvm-svn: 335238
Summary: Pretty much everything we need is in llvm::TargetMachine.
Reviewers: gchatelet
Subscribers: llvm-commits, tschuett
Differential Revision: https://reviews.llvm.org/D48428
llvm-svn: 335237
Summary:
For sample and gather ops, we can accurately determine the set of
vaddr-size instruction variants that are required. This reduces
the size of instruction tables by ~5%.
The number of machine instruction opcodes is reduced from 10002
to 9476.
Change-Id: Ie7fc65d3657b762c7816017fe70b2e9bec644a8a
Reviewers: arsenm, rampitec
Subscribers: kzhuravl, wdng, yaxunl, dstuttard, tpr, llvm-commits, t-tye
Differential Revision: https://reviews.llvm.org/D48168
llvm-svn: 335232
Summary:
This also removes the need for atomic pseudo instructions, since
we select the correct encoding directly in SITargetLowering::lowerImage
for dimension-aware image intrinsics.
Mesa uses dimension-aware image intrinsics since
commit a9a7993441.
Change-Id: I7473d20009476a4ed6d919cae4e6dca9ff42e77a
Reviewers: arsenm, rampitec, mareko, tpr, b-sumner
Subscribers: kzhuravl, wdng, yaxunl, dstuttard, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D48167
llvm-svn: 335231
Summary:
Use the expanded features of the TableGen generic tables to avoid manually
adding the combinatorially exploded set of intrinsics. The
getAMDGPUImageDimIntrinsic lookup function is early-out,
i.e. non-AMDGPU intrinsics will never look at the underlying table.
Use a generic approach for getting the new intrinsic overload to keep the
code simple, and make the image dmask handling more generic:
- handle non-sampler image loads
- handle the case where the set of demanded elements is not a prefix
There is some overlap between this code and an optimization that happens
in the backend during code generation. They currently complement each other:
- only the codegen optimization can generate vec3 loads
- only the InstCombine optimization can handle D16
The InstCombine optimization also likely covers more cases since the
codegen optimization is fairly ad-hoc. Ideally, we'll remove the optimization
in codegen once the infrastructure for vec3 is in place (which will probably
take a long time).
Modify the test cases to use dimension-aware intrinsics. This makes it
easier to see that the test coverage for the new intrinsics is equivalent,
and the old style intrinsics will be removed in a follow-up commit anyway.
Change-Id: I4b91ea661413d13004956fe4ef7d13d41b8ce3ad
Reviewers: arsenm, rampitec, majnemer
Subscribers: kzhuravl, wdng, mgorny, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D48165
llvm-svn: 335230
Summary:
Also explicitly port over some tests in llvm.amdgcn.image.* that were
missing. Some tests are removed because they no longer apply (i.e.
explicitly testing building an address vector via insertelement).
This is in preparation for the eventual removal of the old-style
intrinsics.
Some additional notes:
- constant-address-space-32bit.ll: change some GCN-NEXT to GCN because
the instruction schedule was subtly altered
- insert_vector_elt.ll: the old test didn't actually test anything,
because %tmp1 was not used; remove the load, because it doesn't work
(Because of the amdgpu_ps calling convention? In any case, it's
orthogonal to what the test claims to be testing.)
Change-Id: Idfa99b6512ad139e755e82b8b89548ab08f0afcf
Reviewers: arsenm, rampitec
Subscribers: MatzeB, qcolombet, kzhuravl, wdng, yaxunl, dstuttard, tpr, t-tye, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D48018
llvm-svn: 335229
Summary:
Having TableGen patterns for image intrinsics is hitting limitations:
for D16 we already have to manually pre-lower the packing of data
values, and we will have to do the same for A16 eventually.
Since there is already some custom C++ code anyway, it is arguably easier
to just do everything in C++, now that we can use the beefed-up generic
tables backend of TableGen to provide all the required metadata and map
intrinsics to corresponding opcodes. With this approach, all image
intrinsic lowering happens in SITargetLowering::lowerImage. That code is
dense due to all the cases that it handles, but it should still be easier
to follow than what we had before, by virtue of it all being done in a
single location, and by virtue of not relying on the TableGen pattern
magic that very few people really understand.
This means that we will have MachineSDNodes with MIMG instructions
during DAG combining, but that seems alright: previously we had
intrinsic nodes instead, but those are similarly opaque to the generic
CodeGen infrastructure, and the final pattern matching just did a 1:1
translation to machine instructions anyway. If anything, the fact that
we now merge the address words into a vector before DAG combine should
be an advantage.
Change-Id: I417f26bd88f54ce9781c1668acc01f3f99774de6
Reviewers: arsenm, rampitec, rtaylor, tstellar
Subscribers: kzhuravl, wdng, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D48017
llvm-svn: 335228
Summary:
This allows us to access rich information about MIMG opcodes from C++ code.
Simplifying the mapping between equivalent opcodes of different data size
becomes quite natural.
This also flattens the MIMG-related class and multiclass hierarchy a little,
and collapses together some of the scaffolding for sample and gather4 opcodes.
Change-Id: I1a2549fdc1e881ff100e5393d2d87e73729a0ccd
Reviewers: arsenm, rampitec
Subscribers: kzhuravl, wdng, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D48016
llvm-svn: 335227
Summary:
This is essentially a rewrite of the backend which introduces TableGen
base classes GenericEnum, GenericTable, and SearchIndex. They allow
generating custom enums and tables with lookup functions using
separately defined records as the underlying database.
Also added as part of this change:
- Lookup functions may use indices composed of multiple fields.
- Instruction fields are supported similar to Intrinsic fields.
- When the lookup key has contiguous numeric values, the lookup
function will directly index into the table instead of using a binary
search.
The existing SearchableTable functionality is internally mapped to the
new primitives.
Change-Id: I444f3490fa1dbfb262d7286a1660a2c4308e9932
Reviewers: arsenm, tra, t.p.northover
Subscribers: wdng, llvm-commits
Differential Revision: https://reviews.llvm.org/D48013
llvm-svn: 335225
Summary:
This will allows us to provide rich metadata about the instructions
in tables that are accessible by custom C++ code.
Change-Id: Id9305a26304ab6a6cceb6c65c8cd49141cc0101d
Reviewers: arsenm, rampitec
Subscribers: kzhuravl, wdng, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D48011
llvm-svn: 335224
Summary:
Kill instructions sometimes do use SCC in unusual circumstances, when
v_cmpx cannot be used due to the operands that are involved.
Additionally, even if SCC was never defined by the expansion, kill pseudos
could previously occur between an s_cmp and an s_cbranch_scc, which breaks
the SCC liveness tracking when the pseudo is expanded to split the basic
block. While it would be possible to explicitly mark the SCC as live-in for
the successor basic block, it's simpler to just mark the pseudo as using SCC,
so that such a sequence is never emitted by instruction selection in the
first place.
A similar issue affects indirect source/dest pseudos in principle, although
I haven't been able to come up with a test case where it actually matters
(this affects instruction selection, so a MIR test can't be used).
Fixes: dEQP-GLES3.functional.shaders.discard.dynamic_loop_always
Change-Id: Ica8d82ecff1a763b892a1112cf1b06c948863a4f
Reviewers: arsenm, rampitec
Subscribers: kzhuravl, wdng, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D47761
llvm-svn: 335223
Summary:
This allows us to reduce the number of different machine instruction
opcodes, which reduces the table sizes and helps flatten the TableGen
multiclass hierarchies.
We can do this because for each hardware MIMG opcode, we have a full set
of IMAGE_xxx_Vn_Vm machine instructions for all required sizes of vdata
and vaddr registers. Instead of having separate D16 machine instructions,
a packed D16 instructions loading e.g. 4 components can simply use the
same V2 opcode variant that non-D16 instructions use.
We still require a TSFlag for D16 buffer instructions, because the
D16-ness of buffer instructions is part of the opcode. Renaming the flag
should help avoid future confusion.
The one non-obvious code change is that for gather4 instructions, the
disassembler can no longer automatically decide whether to use a V2 or
a V4 variant. The existing logic which choose the correct variant for
other MIMG instruction is extended to cover gather4 as well.
As a bonus, some of the assembler error messages are now more helpful
(e.g., complaining about a wrong data size instead of a non-existing
instruction).
While we're at it, delete a whole bunch of dead legacy TableGen code.
Change-Id: I89b02c2841c06f95e662541433e597f5d4553978
Reviewers: arsenm, rampitec, kzhuravl, artem.tamazov, dp, rtaylor
Subscribers: wdng, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D47434
llvm-svn: 335222
Summary:
This also allows inner foreach loops to have a list that depends on
the iteration variable of an outer foreach loop. The test cases show
some very simple examples of how this can be used.
This was perhaps the last remaining major non-orthogonality in the
TableGen frontend.
Change-Id: I79b92d41a5c0e7c03cc8af4000c5e1bda5ef464d
Reviewers: tra, simon_tatham, craig.topper, MartinO, arsenm
Subscribers: wdng, llvm-commits
Differential Revision: https://reviews.llvm.org/D47431
llvm-svn: 335221
This enables da-delinearize in Dependence Analysis for delinearizing array
accesses into multiple dimensions. This can help to increase the power of
Dependence analysis on multi-dimensional arrays and prevent having to fall
back to the slower and less accurate MIV tests. It adds static checks on the
bounds of the arrays to ensure that one dimension doesn't overflow into
another, and brings our code in line with our tests.
Differential Revision: https://reviews.llvm.org/D45872
llvm-svn: 335217
These were being over cautious for costs for one/two op general shuffles - VSHUFPD doesn't have to replicate the same shuffle in both lanes like VSHUFPS does.
llvm-svn: 335216
