These include:
* Several functions for creating an LLVMDIBuilder,
* LLVMDIBuilderCreateCompileUnit,
* LLVMDIBuilderCreateFile,
* LLVMDIBuilderCreateDebugLocation.
Patch by Harlan Haskins.
Differential Revision: https://reviews.llvm.org/D32368
llvm-svn: 317135
Similar to the existing code to lower to PACKSS, we can use PACKUS if the input vector's leading zero bits extend all the way to the packed/truncated value.
We have to account for pre-SSE41 targets not supporting PACKUSDW
llvm-svn: 317128
This patch is to rewrite FileOutputBuffer as two separate classes;
one for file-backed output buffer and the other for memory-backed
output buffer. I think the new code is easier to follow because two
different implementations are now actually separated as different
classes.
Unlike the previous implementation, the class that does not replace the
final output file using rename(2) does not create a temporary file at
all. Instead, it allocates memory using mmap(2) and use it. I think
this is an improvement because it is now guaranteed that the temporary
memory region doesn't trigger any I/O and there's now zero chance to
leave a temporary file behind. Also, it shouldn't impose new restrictions
because were using mmap IO too.
Differential Revision: https://reviews.llvm.org/D39449
llvm-svn: 317127
This will enable us to prefer VALIGND/Q during shuffle lowering in order to get the extended register encoding space when BWI isn't available. But if we end up not using the extended registers we can switch VPALIGNR for the shorter VEX encoding.
Differential Revision: https://reviews.llvm.org/D39401
llvm-svn: 317122
Summary: In the compile phase of SamplePGO+ThinLTO, ICP is not invoked. Instead, indirect call targets will be included as function metadata for ThinIndex to buidl the call graph. This should not only include functions defined in other modules, but also functions defined in the same module, otherwise ThinIndex may find the callee dead and eliminate it, while ICP in backend will revive the symbol, which leads to undefined symbol.
Reviewers: tejohnson
Reviewed By: tejohnson
Subscribers: sanjoy, llvm-commits, mehdi_amini
Differential Revision: https://reviews.llvm.org/D39480
llvm-svn: 317118
The importer will now accept nested instructions in the result pattern such as
(ADDWrr $a, (SUBWrr $b, $c)). This is only valid when the nested instruction
def's a single vreg and the parent instruction consumes a single vreg where a
nested instruction is specified. The importer will automatically create a vreg
to connect the two using the type information from the pattern. This vreg will
be constrained to the register classes given in the instruction definitions*.
* REG_SEQUENCE is explicitly rejected because of this. The definition doesn't
constrain to a register class and it therefore needs special handling.
llvm-svn: 317117
This patch moves the check for opt size and hasPartialRegUpdate into the lower level implementation of foldMemoryOperandImpl to catch the entry point that fast isel uses.
We're still folding undef register instructions in AVX that we should also probably disable, but that's a problem for another patch.
Unfortunately, this requires reordering a bunch of functions which is why the diff is so large. I can do the function reordering separately if we want.
Differential Revision: https://reviews.llvm.org/D39402
llvm-svn: 317112
This is necessary because DCE is applied to full LTO modules. Without
this change, a reference from a dead ThinLTO global to a dead full
LTO global will result in an undefined reference at link time.
This problem is only observable when --gc-sections is disabled, or
when targeting COFF, as the COFF port of lld requires all symbols to
have a definition even if all references are dead (this is consistent
with link.exe).
This change also adds an EliminateAvailableExternally pass at -O0. This
is necessary to handle the situation on Windows where a non-prevailing
copy of a linkonce_odr function has an SEH filter function; any
such filters must be DCE'd because they will contain a call to the
llvm.localrecover intrinsic, passing as an argument the address of the
function that the filter belongs to, and llvm.localrecover requires
this function to be defined locally.
Fixes PR35142.
Differential Revision: https://reviews.llvm.org/D39484
llvm-svn: 317108
This makes the command line options consistent with llvm-cov and
llvm-profdata, which both use `-num-threads` and `-j`.
This also addresses the conflict reported after landing D39355.
Differential revision: https://reviews.llvm.org/D39496
llvm-svn: 317104
Summary:
[X86] Teach fast isel to handle i64 sitofp with AVX.
For some reason we only handled i32 sitofp with AVX. But with SSE only we support i64 so we should do the same with AVX.
Also add i686 command lines for the 32-bit tests. 64-bit tests are in a separate file to avoid a fast-isel abort failure in 32-bit mode.
Reviewers: RKSimon, zvi
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D39450
llvm-svn: 317102
This patch aims to provide correct dwarf unwind information in function
epilogue for X86.
It consists of two parts. The first part inserts CFI instructions that set
appropriate cfa offset and cfa register in emitEpilogue() in
X86FrameLowering. This part is X86 specific.
The second part is platform independent and ensures that:
- CFI instructions do not affect code generation
- Unwind information remains correct when a function is modified by
different passes. This is done in a late pass by analyzing information
about cfa offset and cfa register in BBs and inserting additional CFI
directives where necessary.
Changed CFI instructions so that they:
- are duplicable
- are not counted as instructions when tail duplicating or tail merging
- can be compared as equal
Added CFIInstrInserter pass:
- analyzes each basic block to determine cfa offset and register valid at
its entry and exit
- verifies that outgoing cfa offset and register of predecessor blocks match
incoming values of their successors
- inserts additional CFI directives at basic block beginning to correct the
rule for calculating CFA
Having CFI instructions in function epilogue can cause incorrect CFA
calculation rule for some basic blocks. This can happen if, due to basic
block reordering, or the existence of multiple epilogue blocks, some of the
blocks have wrong cfa offset and register values set by the epilogue block
above them.
CFIInstrInserter is currently run only on X86, but can be used by any target
that implements support for adding CFI instructions in epilogue.
Patch by Violeta Vukobrat.
Differential Revision: https://reviews.llvm.org/D35844
llvm-svn: 317100
Summary:
Compute the strongly connected components of the CFG and fall back to
use these for blocks that are in loops that are not detected by
LoopInfo when computing loop back-edge and exit branch probabilities.
Reviewers: dexonsmith, davidxl
Subscribers: mcrosier, llvm-commits
Differential Revision: https://reviews.llvm.org/D39385
llvm-svn: 317094
This patch reverts rL311205 that was initially a wrong fix. The real problem
was in intersection of signed and unsigned ranges (see rL316552), and the
patch being reverted masked the problem instead of fixing it.
By now, the test against which rL311205 was made works OK even without this
code. This revert patch also contains a test case that demonstrates incorrect
behavior caused by rL311205: it is caused by incorrect choise of signed max
instead of unsigned.
llvm-svn: 317088
So far we've only been using PACKSS truncations with 'all-bits or zero-bits' patterns (vector comparison results etc.). When really we can safely use it for any case as long as the number of sign bits reach down to the last 16-bits (or 8-bits if we're truncating to bytes).
The next steps after this is add the equivalent support for PACKUS and to support packing to sub-128 bit vectors for truncating stores etc.
Differential Revision: https://reviews.llvm.org/D39476
llvm-svn: 317086
Summary:
By replacing branches to CommonExitBlock, we remove the node from
CommonExitBlock's predecessors, invalidating the iterator. The problem
is exposed when the common exit block has multiple predecessors and
needs to sink lifetime info. The modification in the test case trigger
the issue.
Reviewers: davidxl, davide, wmi
Reviewed By: davidxl
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D39112
llvm-svn: 317084
fmod specification requires the sign of the remainder is
the same as numerator in case remainder is zero.
Reviewers: gottesmm, scanon, arsenm, davide, craig.topper
Reviewed By: scanon
Subscribers: wdng, llvm-commits
Differential Revision: https://reviews.llvm.org/D39225
llvm-svn: 317081
The next commit will add support for multi-instruction emission so we need to
start allocating instruction ID's instead of hard-coding them to 0.
llvm-svn: 317057
I need a test that only runs in a reasonable amount of time on systems
that have sparse files. The broadest class of systems that support
sparse files are linux systems. So restricting my test to linux systems
should suffice. This change adds the system-linux feature to llvm-lit so
that it can be required.
Differential Revision: https://reviews.llvm.org/D39482
llvm-svn: 317055
Summary: Help differentiate code and data by parsing DWARF information. This will reduce false positive rates where data is placed in executable sections and is mistakenly parsed as code, resulting in an inflation in the number of indirect CF instructions (and hence an inflation of the number of unprotected).
Also prints the DWARF line data around the region of each indirect CF instruction.
Reviewers: pcc
Subscribers: probinson, llvm-commits, vlad.tsyrklevich, mgorny, aprantl, kcc
Differential Revision: https://reviews.llvm.org/D38654
llvm-svn: 317050
Multi-instruction emission needs to ensure the the instructions are generated
a depth-first fashion. For example:
(ADDWrr (SUBWrr a, b), c)
needs to emit the SUBWrr before the ADDWrr. However, our walk over
TreePatternNode's is highly context sensitive which makes it difficult to append
BuildMIActions in the order we want. To fix this, we now keep track of the
insertion point as we add actions. This will allow multi-insn emission to insert
BuildMI's in the correct place.
The previous commit failed on the Ubuntu bots using GCC 4.8. These bots lack the
const_iterator forms of insert() and emplace() that were added in C++11. As a
result I've switched the const_iterators to iterators.
llvm-svn: 317049
This formulation might be slightly slower since I eagerly compute the cheap replacements. If anyone sees this having a compile time impact, let me know and I'll use lazy population instead.
llvm-svn: 317048
