The patch rL309080 was reverted because it did not clean up the cache on "forgetValue"
method call. This patch re-enables this change, adds the missing check and introduces
two new unit tests that make sure that the cache is cleaned properly.
Differential Revision: https://reviews.llvm.org/D36087
llvm-svn: 309925
infinite-inlining across multiple runs of the inliner by keeping a tiny
history of internal-to-SCC inlining decisions.
This is still a bit gross, but I don't yet have any fundamentally better
ideas and numerous people are blocked on this to use new PM and ThinLTO
together.
The core of the idea is to detect when we are about to do an inline that
has a chance of re-splitting an SCC which we have split before with
a similar inlining step. That is a critical component in the inlining
forming a cycle and so far detects all of the various cyclic patterns
I can come up with as well as the original real-world test case (which
comes from a ThinLTO build of libunwind).
I've added some tests that I think really demonstrate what is going on
here. They are essentially state machines that march the inliner through
various steps of a cycle and check that we stop when the cycle is closed
and that we actually did do inlining to form that cycle.
A lot of thanks go to Eric Christopher and Sanjoy Das for the help
understanding this issue and improving the test cases.
The biggest "yuck" here is the layering issue -- the CGSCC pass manager
is providing somewhat magical state to the inliner for it to use to make
itself converge. This isn't great, but I don't honestly have a lot of
better ideas yet and at least seems nicely isolated.
I have tested this patch, and it doesn't block *any* inlining on the
entire LLVM test suite and SPEC, so it seems sufficiently narrowly
targeted to the issue at hand.
We have come up with hypothetical issues that this patch doesn't cover,
but so far none of them are practical and we don't have a viable
solution yet that covers the hypothetical stuff, so proceeding here in
the interim. Definitely an area that we will be back and revisiting in
the future.
Differential Revision: https://reviews.llvm.org/D36188
llvm-svn: 309784
Stack coloring pass need to maintain AliasAnalysis information when merging stack slots of different types.
Actually, there is a FIXME comment in StackColoring.cpp
// FIXME: In order to enable the use of TBAA when using AA in CodeGen,
// we'll also need to update the TBAA nodes in MMOs with values
// derived from the merged allocas.
But, TBAA has been already enabled in CodeGen without fixing this pass.
The incorrect TBAA metadata results in recent failures in bootstrap test on ppc64le (PR33928) by allowing unsafe instruction scheduling.
Although we observed the problem on ppc64le, this is a platform neutral issue.
This patch makes the stack coloring pass maintains AliasAnalysis information when merging multiple stack slots.
llvm-svn: 309651
Summary:
Adding part of the changes in D30369 (needed to make progress):
Current patch updates AliasAnalysis and MemoryLocation, but does _not_ clean up MemorySSA.
Original summary from D30369, by dberlin:
Currently, we have instructions which affect memory but have no memory
location. If you call, for example, MemoryLocation::get on a fence,
it asserts. This means things specifically have to avoid that. It
also means we end up with a copy of each API, one taking a memory
location, one not.
This starts to fix that.
We add MemoryLocation::getOrNone as a new call, and reimplement the
old asserting version in terms of it.
We make MemoryLocation optional in the (Instruction, MemoryLocation)
version of getModRefInfo, and kill the old one argument version in
favor of passing None (it had one caller). Now both can handle fences
because you can just use MemoryLocation::getOrNone on an instruction
and it will return a correct answer.
We use all this to clean up part of MemorySSA that had to handle this difference.
Note that literally every actual getModRefInfo interface we have could be made private and replaced with:
getModRefInfo(Instruction, Optional<MemoryLocation>)
and
getModRefInfo(Instruction, Optional<MemoryLocation>, Instruction, Optional<MemoryLocation>)
and delegating to the right ones, if we wanted to.
I have not attempted to do this yet.
Reviewers: dberlin, davide, dblaikie
Subscribers: sanjoy, hfinkel, chandlerc, llvm-commits
Differential Revision: https://reviews.llvm.org/D35441
llvm-svn: 309641
This reverts commit r309080. The patch needs to clear out the
ScalarEvolution::ExitLimits cache in forgetMemoizedResults.
I've replied on the commit thread for the patch with more details.
llvm-svn: 309357
Summary: In the current implementation, isPromotionProfitable only checks if the call count to a direct target is no less than a certain percentage threshold of the remaining call counts that have not been promoted. This causes code size problems when the target count is small but greater than a large portion of remaining counts. E.g. target1 takes 99.9%, while target2 takes 0.1%. Both targets will be promoted and inlined, makes the function size too large, which potentially prevents it from further inlining into its callers. This patch adds another percentage threshold against the total indirect call count. If the target count needs to be no less than both thresholds in order to be promoted speculatively.
Reviewers: davidxl, tejohnson
Reviewed By: tejohnson
Subscribers: sanjoy, llvm-commits
Differential Revision: https://reviews.llvm.org/D35962
llvm-svn: 309345
Summary: We can use the template parameter `IsPostDom` to pick an appropriate SmallVector size to store DomTree roots for dominators and postdominators. Before, the code would always allocate memory with `std::vector`.
Reviewers: dberlin, davide, sanjoy, grosser
Reviewed By: grosser
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D35636
llvm-svn: 309148
This patch adds a cache for computeExitLimit to save compilation time. A lot of examples of
tests that take extensive time to compile are attached to the bug 33494.
Differential Revision: https://reviews.llvm.org/D35827
llvm-svn: 309080
Propagates the GraphT template argument to the default value of
the AnalysisGraphTraitsT template argument. This allows to specialize
the DefaultAnalysisGraphTraits<AnalysisT,GraphT> for analysis with a
graph type different from the analysis type and it will automatically
get picked-up.
Note: This was probably the intended purpose and should not result in any
functional change.
llvm-svn: 308878
This patch makes LSR generate better code for SystemZ in the cases of memory
intrinsics, Load->Store pairs or comparison of immediate with memory.
In order to achieve this, the following common code changes were made:
* New TTI hook: LSRWithInstrQueries(), which defaults to false. Controls if
LSR should do instruction-based addressing evaluations by calling
isLegalAddressingMode() with the Instruction pointers.
* In LoopStrengthReduce: handle address operands of memset, memmove and memcpy
as address uses, and call isFoldableMemAccessOffset() for any LSRUse::Address,
not just loads or stores.
SystemZ changes:
* isLSRCostLess() implemented with Insns first, and without ImmCost.
* New function supportedAddressingMode() that is a helper for TTI methods
looking at Instructions passed via pointers.
Review: Ulrich Weigand, Quentin Colombet
https://reviews.llvm.org/D35262https://reviews.llvm.org/D35049
llvm-svn: 308729
functions.
In the prior commit, we provide ordering to the LCG between functions
and library function definitions that they might begin to call through
transformations. But we still would delete these library functions from
the call graph if they became dead during inlining.
While this immediately crashed, it also exposed a loss of information.
We shouldn't remove definitions of library functions that can still
usefully participate in the LCG-powered CGSCC optimization process. If
new call edges are formed, we want to have definitions to be called.
We can still remove these functions if truly dead using global-dce, etc,
but removing them during the CGSCC walk is premature.
This fixes a crash in the new PM when optimizing some unusual libraries
that end up with "internal" lib functions such as the code in the "R"
language's libraries.
llvm-svn: 308417
using runtime checks
Extend the SCEVPredicateRewriter to work a bit harder when it encounters an
UnknownSCEV for a Phi node; Try to build an AddRecurrence also for Phi nodes
whose update chain involves casts that can be ignored under the proper runtime
overflow test. This is one step towards addressing PR30654.
Differential revision: http://reviews.llvm.org/D30041
llvm-svn: 308299
function to every defined function known to LLVM as a library function.
LLVM can introduce calls to these functions either by replacing other
library calls or by recognizing patterns (such as memset_pattern or
vector math patterns) and replacing those with calls. When these library
functions are actually defined in the module, we need to have reference
edges to them initially so that we visit them during the CGSCC walk in
the right order and can effectively rebuild the call graph afterward.
This was discovered when building code with Fortify enabled as that is
a common case of both inline definitions of library calls and
simplifications of code into calling them.
This can in extreme cases of LTO-ing with libc introduce *many* more
reference edges. I discussed a bunch of different options with folks but
all of them are unsatisfying. They either make the graph operations
substantially more complex even when there are *no* defined libfuncs, or
they introduce some other complexity into the callgraph. So this patch
goes with the simplest possible solution of actual synthetic reference
edges. If this proves to be a memory problem, I'm happy to implement one
of the clever techniques to save memory here.
llvm-svn: 308088
Now, getUserCost() only checks the src and dst types of EXT to decide it is free
or not. This change first checks the types, then calls isExtFreeImpl(), and
check if EXT can form ExtLoad at last. Currently, only AArch64 has customized
implementation of isExtFreeImpl() to check if EXT can be folded into its use.
Differential Revision: https://reviews.llvm.org/D34458
llvm-svn: 308076
Summary:
DominatorTreeBase used to have IsPostDominators (bool) member to indicate if the tree is a dominator or a postdominator tree. This made it possible to switch between the two 'modes' at runtime, but it isn't used in practice anywhere.
This patch makes IsPostDominator a template argument. This way, it is easier to switch between different algorithms at compile-time based on this argument and design external utilities around it. It also makes it impossible to incidentally assign a postdominator tree to a dominator tree (and vice versa), and to further simplify template code in GenericDominatorTreeConstruction.
Reviewers: dberlin, sanjoy, davide, grosser
Reviewed By: dberlin
Subscribers: mzolotukhin, llvm-commits
Differential Revision: https://reviews.llvm.org/D35315
llvm-svn: 308040
Where is is needed (at the end of headers that define it), be
consistent about its use.
Also fix a few header guards that I found in the process.
Differential Revision: https://reviews.llvm.org/D34916
llvm-svn: 307840
Summary:
Solves PR33689.
If the pointer size is less than the size of the type used for the array
size in an alloca (the <ty> type below) then we could trigger the assert in
the PR. In that example we have pointer size i16 and <ty> is i32.
<result> = alloca [inalloca] <type> [, <ty> <NumElements>] [, align <alignment>]
Handle the situation by allowing truncation as well as zero extension in
ObjectSizeOffsetVisitor::visitAllocaInst().
Also, we now detect overflow in visitAllocaInst(), similar to how it was
already done in visitCallSite().
Reviewers: craig.topper, rnk, george.burgess.iv
Reviewed By: george.burgess.iv
Subscribers: davide, llvm-commits
Differential Revision: https://reviews.llvm.org/D35003
llvm-svn: 307754
invalidation of analyses when merging SCCs.
While I've added a bunch of testing of this, it takes something much
more like the inliner to really trigger this as you need to have
partially-analyzed SCCs with updates at just the right time. So I've
added a direct test for this using the inliner and verifying the
domtree. Without the changes here, this test ends up finding a stale
dominator tree.
However, to handle this properly, we need to invalidate analyses
*before* merging the SCCs. After talking to Philip and Sanjoy about this
they convinced me this was the right approach. To do this, we need
a callback mechanism when merging SCCs so we can observe the cycle that
will be merged before the merge happens. This API update ended up being
surprisingly easy.
With this commit, the new PM passes the test-suite again. It hadn't
since MemorySSA was enabled for EarlyCSE as that also will find this bug
very quickly.
llvm-svn: 307498
dependencies between analyses.
This uncovers even more issues with the proxies and the splitting apart
of SCCs which are fixed in this patch. I discovered this while trying to
add more rigorous testing for a change I'm making to the call graph
update invalidation logic.
llvm-svn: 307497
Adds loop expansions for known-size and unknown-sized memcpy calls, allowing the
target to provide the operand types through TTI callbacks. The default values
for the TTI callbacks use int8 operand types and matches the existing behaviour
if they aren't overridden by the target.
Differential revision: https://reviews.llvm.org/D32536
llvm-svn: 307346
This patch adds support for handling some forms of ands and ors in
ValueTracking's isImpliedCondition API.
PR33611
https://reviews.llvm.org/D34901
llvm-svn: 307304
This reverts commit r306907 and reapplies the patches in the title.
The patches used to make one of the
CodeGen/ARM/2011-02-07-AntidepClobber.ll test to fail because of a
missing null check.
llvm-svn: 306919
This reverts commit r306894.
Revert "[Dominators] Add NearestCommonDominator verification"
This reverts commit r306893.
Revert "[Dominators] Keep tree level in DomTreeNode and use it to find NCD and answer dominance queries"
This reverts commit r306892.
llvm-svn: 306907
Summary: This patch teaches IteratedDominanceFrontier to use the level information stored in DomTreeNodes instead of calculating it manually.
Reviewers: dberlin, sanjoy, davide
Reviewed By: davide
Subscribers: davide, llvm-commits
Differential Revision: https://reviews.llvm.org/D34703
llvm-svn: 306894
Summary:
To enable profile hotness information in diagnostics output, Clang takes
the option `-fdiagnostics-show-hotness` -- that's "diagnostics", with an
"s" at the end. Clang also defines `CodeGenOptions::DiagnosticsWithHotness`.
LLVM, on the other hand, defines
`LLVMContext::getDiagnosticHotnessRequested` -- that's "diagnostic", not
"diagnostics". It's a small difference, but it's confusing, typo-inducing, and
frustrating.
Add a new method with the spelling "diagnostics", and "deprecate" the
old spelling.
Reviewers: anemet, davidxl
Reviewed By: anemet
Subscribers: llvm-commits, mehdi_amini
Differential Revision: https://reviews.llvm.org/D34864
llvm-svn: 306848
In rL300494 there was an attempt to deal with excessive compile time on
invocations of getSign/ZeroExtExpr using local caching. This approach only
helps if we request the same SCEV multiple times throughout recursion. But
in the bug PR33431 we see a case where we request different values all the time,
so caching does not help and the size of the cache grows enormously.
In this patch we remove the local cache for this methods and add the recursion
depth limit instead, as we do for arithmetics. This gives us a guarantee that the
invocation sequence is limited and reasonably short.
Differential Revision: https://reviews.llvm.org/D34273
llvm-svn: 306785
The style guide states that the explicit `inline`
should not be used with inline methods. classof is
very common inline method with a fair amount on
inconsistency:
$ git grep classof ./include | grep inline | wc -l
230
$ git grep classof ./include | grep -v inline | wc -l
257
I chose to target this method rather the larger change
since this method is easily cargo-culted (I did it at
least once). I considered doing the larger change and
removing all occurrences but that would be a much larger
change.
Differential Revision: https://reviews.llvm.org/D33906
llvm-svn: 306731
Summary:
When we have patterns like
loop:
%la = load %ptr, !tbaa
%lba = load %ptr, !tbaa !noalias
AliasSetTracker would previously think that the two types of annotation for
the pointer conflict, dropping both for the purpose of determining alias sets.
That is clearly way too conservative, as the tbaa is still valid whether or
not one of the memory accesses has additional AA metadata. We could go
one step further and attempt to properly merge the AA metadata,
but it's not clear that that would be worth it since that may introduce
additional MD nodes, which may be undesirable since this is merely an
Analysis.
Reviewers: hfinkel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D32139
llvm-svn: 306727
In LLVM IR the following code:
%r = urem <ty> %t, %b
is equivalent to:
%q = udiv <ty> %t, %b
%s = mul <ty> nuw %q, %b
%r = sub <ty> nuw %t, %q ; (t / b) * b + (t % b) = t
As UDiv, Mul and Sub are already supported by SCEV, URem can be
implemented with minimal effort this way.
Note: While SRem and SDiv are also related this way, SCEV does not
provides SDiv yet.
llvm-svn: 306695
The changes are a result of discussion of https://reviews.llvm.org/D33685.
It solves the following problem:
1. We can inform getGEPCost about simplified indices to help it with
calculating the cost. But getGEPCost does not take into account the
context which GEPs are used in.
2. We have getUserCost which can take the context into account but we cannot
inform about simplified indices.
With the changes getUserCost will have access to additional information
as getGEPCost has.
The one parameter getUserCost is also provided.
Differential Revision: https://reviews.llvm.org/D34057
llvm-svn: 306674
Summary: Make OrderedInstructions and OrderedBasicBlock use AssertingVH to try and catch mistakes
Reviewers: efriedma
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D34780
llvm-svn: 306605
Summary:
This patch changes getRange to getRangeRef and returns a reference to the ConstantRange object stored inside the DenseMap caches. We then take advantage of that to add new helper methods that can return min/max value of a signed or unsigned ConstantRange using that reference without first copying the ConstantRange.
getRangeRef calls itself recursively and I believe the reference return is fine for those calls.
I've left getSignedRange and getUnsignedRange returning a ConstantRange object so they will make a copy now. This is to ensure safety since the reference will be invalidated if the DenseMap changes.
I'm sure there are still more places that can take advantage of the reference and I'll submit future patches as I find them.
Reviewers: sanjoy, davide
Reviewed By: sanjoy
Subscribers: zzheng, llvm-commits, mzolotukhin
Differential Revision: https://reviews.llvm.org/D32978
llvm-svn: 306229
Currently JumpThreading can use LazyValueInfo to analyze an 'and' or 'or' of compare if the compare is fed by a livein of a basic block. This can be used to to prove the condition can't be met for some predecessor and the jump from that predecessor can be moved to the false path of the condition.
But if the compare is something that InstCombine turns into an add and a single compare, it can't be analyzed because the livein is now an input to the add and not the compare.
This patch adds a new method to LVI to get a ConstantRange on an edge. Then we teach jump threading to detect the add livein feeding a compare and to get the ConstantRange and propagate it.
Differential Revision: https://reviews.llvm.org/D33262
llvm-svn: 306085
This is a fix for PR33292 that shows a case of extremely long compilation
of a single .c file with clang, with most time spent within SCEV.
We have a mechanism of limiting recursion depth for getAddExpr to avoid
long analysis in SCEV. However, there are calls from getAddExpr to getMulExpr
and back that do not propagate the info about depth. As result of this, a chain
getAddExpr -> ... .> getAddExpr -> getMulExpr -> getAddExpr -> ... -> getAddExpr
can be extremely long, with every segment of getAddExpr's being up to max depth long.
This leads either to long compilation or crash by stack overflow. We face this situation while
analyzing big SCEVs in the test of PR33292.
This patch applies the same limit on max expression depth for getAddExpr and getMulExpr.
Differential Revision: https://reviews.llvm.org/D33984
llvm-svn: 305463
User has 3 signatures for operator new today. They take a single size, a size and a number of users, and a size, number of users, and descriptor size.
Historically there used to only be one signature that took size and a number of uses. Long ago derived classes implemented their own versions that took just a size and would call the size and use count version. Then they left an unimplemented signature for the size and use count signature from User. As we moved to C++11 this unimplemented signature because = delete.
Since then operator new has picked up two new signatures for operator new. But when the 3 argument version was added it was never added to the delete list in all of the derived classes where the 2 argument version is deleted. This makes things inconsistent.
I believe once one version of operator new is created in a derived class name hiding will take care of making all of the base class signatures unavailable. So I don't think the deleted lines are needed at all.
This patch removes all of the deletes in cases where there is an override or there is already a delete of another signature (that should trigger name hiding too).
Differential Revision: https://reviews.llvm.org/D34120
llvm-svn: 305251
Summary: The method TargetTransformInfo::getRegisterBitWidth() is declared const, but the type erasing implementation classes (TargetTransformInfo::Concept & TargetTransformInfo::Model) that were introduced by Chandler in https://reviews.llvm.org/D7293 do not have the method declared const. This is an NFC to tidy up the const consistency between TTI and its implementation.
Reviewers: chandlerc, rnk, reames
Reviewed By: reames
Subscribers: reames, jfb, arsenm, dschuff, nemanjai, nhaehnle, javed.absar, sbc100, jgravelle-google, llvm-commits
Differential Revision: https://reviews.llvm.org/D33903
llvm-svn: 305189
The zero heuristic assumes that integers are more likely positive than negative,
but this also has the effect of assuming that strcmp return values are more
likely positive than negative. Given that for nonzero strcmp return values it's
the ordering of arguments that determines the sign of the result there's no
reason to assume that's true.
Fix this by inspecting the LHS of the compare and using TargetLibraryInfo to
decide if it's strcmp-like, and if so only assume that nonzero is more likely
than zero i.e. strings are more often different than the same. This causes a
slight code generation change in the spec2006 benchmark 403.gcc, but with no
noticeable performance impact. The intent of this patch is to allow better
optimisation of dhrystone on Cortex-M cpus, but currently it won't as there are
also some changes that need to be made to if-conversion.
Differential Revision: https://reviews.llvm.org/D33934
llvm-svn: 304970
Summary:
LVIPrinter pass was previously relying on the LVICache. We now directly call the
the LVI functions which solves the value if the LVI information is not already
available in the cache. This has 2 benefits over the printing of LVI cache:
1. higher coverage (i.e. catches errors) in LVI code when cache value is
invalidated.
2. relies on the core functions, and not dependent on the LVI cache (which may
be scrapped at some point).
It would still catch any cache invalidation errors, since we first go through
the cache.
Reviewers: reames, dberlin, sanjoy
Reviewed by: reames
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D32135
llvm-svn: 304819
Summary:
Expanding the loop idiom test for memcpy to also recognize
unordered atomic memcpy. The only difference for recognizing
an unordered atomic memcpy and instead of a normal memcpy is
that the loads and/or stores involved are unordered atomic operations.
Background: http://lists.llvm.org/pipermail/llvm-dev/2017-May/112779.html
Patch by Daniel Neilson!
Reviewers: reames, anna, skatkov
Reviewed By: reames, anna
Subscribers: llvm-commits, mzolotukhin
Differential Revision: https://reviews.llvm.org/D33243
llvm-svn: 304806
I did this a long time ago with a janky python script, but now
clang-format has built-in support for this. I fed clang-format every
line with a #include and let it re-sort things according to the precise
LLVM rules for include ordering baked into clang-format these days.
I've reverted a number of files where the results of sorting includes
isn't healthy. Either places where we have legacy code relying on
particular include ordering (where possible, I'll fix these separately)
or where we have particular formatting around #include lines that
I didn't want to disturb in this patch.
This patch is *entirely* mechanical. If you get merge conflicts or
anything, just ignore the changes in this patch and run clang-format
over your #include lines in the files.
Sorry for any noise here, but it is important to keep these things
stable. I was seeing an increasing number of patches with irrelevant
re-ordering of #include lines because clang-format was used. This patch
at least isolates that churn, makes it easy to skip when resolving
conflicts, and gets us to a clean baseline (again).
llvm-svn: 304787
This patch does an inline expansion of memcmp.
It changes the memcmp library call into an inline expansion when the size is
known at compile time and is under a target specified threshold.
This expansion is implemented in CodeGenPrepare and expands into straight line
code. The target specifies a maximum load size and the expansion works by using
this size to load the two sources, compare, and exit early if a difference is
found. It also has a special case when the memcmp result is used in a compare
to zero equality.
Differential Revision: https://reviews.llvm.org/D28637
llvm-svn: 304313
Params DT and LI are redundant, because these values are contained in fields anyways.
Differential Revision: https://reviews.llvm.org/D33668
llvm-svn: 304204
The patch rL303730 was reverted because test lsr-expand-quadratic.ll failed on
many non-X86 configs with this patch. The reason of this is that the patch
makes a correctless fix that changes optimizer's behavior for this test.
Without the change, LSR was making an overconfident simplification basing on a
wrong SCEV. Apparently it did not need the IV analysis to do this. With the
change, it chose a different way to simplify (that wasn't so confident), and
this way required the IV analysis. Now, following the right execution path,
LSR tries to make a transformation relying on IV Users analysis. This analysis
is target-dependent due to this code:
// LSR is not APInt clean, do not touch integers bigger than 64-bits.
// Also avoid creating IVs of non-native types. For example, we don't want a
// 64-bit IV in 32-bit code just because the loop has one 64-bit cast.
uint64_t Width = SE->getTypeSizeInBits(I->getType());
if (Width > 64 || !DL.isLegalInteger(Width))
return false;
To make a proper transformation in this test case, the type i32 needs to be
legal for the specified data layout. When the test runs on some non-X86
configuration (e.g. pure ARM 64), opt gets confused by the specified target
and does not use it, rejecting the specified data layout as well. Instead,
it uses some default layout that does not treat i32 as a legal type
(currently the layout that is used when it is not specified does not have
legal types at all). As result, the transformation we expect to happen does
not happen for this test.
This re-enabling patch does not have any source code changes compared to the
original patch rL303730. The only difference is that the failing test is
moved to X86 directory and now has requirement of running on x86 only to comply
with the specified target triple and data layout.
Differential Revision: https://reviews.llvm.org/D33543
llvm-svn: 303971
having it internally allocate the loop.
This is a much more flexible API and necessary in the new loop unswitch
to reasonably support both new and old PMs in common code. It also just
seems like a cleaner separation of concerns.
NFC, this should just be a pure refactoring.
Differential Revision: https://reviews.llvm.org/D33528
llvm-svn: 303834
The loop vectorizer usually vectorizes any instruction it can and then
extracts the elements for a scalarized use. On SystemZ, all elements
containing addresses must be extracted into address registers (GRs). Since
this extraction is not free, it is better to have the address in a suitable
register to begin with. By forcing address arithmetic instructions and loads
of addresses to be scalar after vectorization, two benefits result:
* No need to extract the register
* LSR optimizations trigger (LSR isn't handling vector addresses currently)
Benchmarking show improvements on SystemZ with this new behaviour.
Any other target could try this by returning false in the new hook
prefersVectorizedAddressing().
Review: Renato Golin, Elena Demikhovsky, Ulrich Weigand
https://reviews.llvm.org/D32422
llvm-svn: 303744
When folding arguments of AddExpr or MulExpr with recurrences, we rely on the fact that
the loop of our base recurrency is the bottom-lost in terms of domination. This assumption
may be broken by an expression which is treated as invariant, and which depends on a complex
Phi for which SCEVUnknown was created. If such Phi is a loop Phi, and this loop is lower than
the chosen AddRecExpr's loop, it is invalid to fold our expression with the recurrence.
Another reason why it might be invalid to fold SCEVUnknown into Phi start value is that unlike
other SCEVs, SCEVUnknown are sometimes position-bound. For example, here:
for (...) { // loop
phi = {A,+,B}
}
X = load ...
Folding phi + X into {A+X,+,B}<loop> actually makes no sense, because X does not exist and cannot
exist while we are iterating in loop (this memory can be even not allocated and not filled by this moment).
It is only valid to make such folding if X is defined before the loop. In this case the recurrence {A+X,+,B}<loop>
may be existant.
This patch prohibits folding of SCEVUnknown (and those who use them) into the start value of an AddRecExpr,
if this instruction is dominated by the loop. Merging the dominating unknown values is still valid. Some tests that
relied on the fact that some SCEVUnknown should be folded into AddRec's are changed so that they no longer
expect such behavior.
llvm-svn: 303730
The forward declarations and the SimplifyQuery class at the beginning of the namespace weren't indented. But the closing brace for SimplifyQuery and everything after it were indented.
This commit makes the whole file consistent to no identation per coding standards. The signature of every function in this file changed a few weeks ago so this isn't a big disturbance to the revision history.
llvm-svn: 303588
This is a re-application of a r303497 that was reverted in r303498.
I thought it had broken a bot when it had not (the breakage did not
go away with the revert).
This change makes the split between the "exact" backedge taken count
and the "maximum" backedge taken count a bit more obvious. Both of
these are upper bounds on the number of times the loop header
executes (since SCEV does not account for most kinds of abnormal
control flow), but the latter is guaranteed to be a constant.
There were a few places where the max backedge taken count *was* a
non-constant; I've changed those to compute constants instead.
At this point, I'm not sure if the constant max backedge count can be
computed by calling `getUnsignedRange(Exact).getUnsignedMax()` without
losing precision. If it can, we can simplify even further by making
`getMaxBackedgeTakenCount` a thin wrapper around
`getBackedgeTakenCount` and `getUnsignedRange`.
llvm-svn: 303531
This change makes the split between the "exact" backedge taken count
and the "maximum" backedge taken count a bit more obvious. Both of
these are upper bounds on the number of times the loop header
executes (since SCEV does not account for most kinds of abnormal
control flow), but the latter is guaranteed to be a constant.
There were a few places where the max backedge taken count *was* a
non-constant; I've changed those to compute constants instead.
At this point, I'm not sure if the constant max backedge count can be
computed by calling `getUnsignedRange(Exact).getUnsignedMax()` without
losing precision. If it can, we can simplify even further by making
`getMaxBackedgeTakenCount` a thin wrapper around
`getBackedgeTakenCount` and `getUnsignedRange`.
llvm-svn: 303497
Summary: This allows pthread_self to be pulled out of a loop by LICM.
Reviewers: hfinkel, arsenm, davide
Reviewed By: davide
Subscribers: davide, wdng, llvm-commits
Differential Revision: https://reviews.llvm.org/D32782
llvm-svn: 303495
Refactor the strlen optimization code to work for both strlen and wcslen.
This especially helps with programs in the wild where people pass
L"string"s to const std::wstring& function parameters and the wstring
constructor gets inlined.
This also fixes a lingerind API problem/bug in getConstantStringInfo()
where zeroinitializers would always give you an empty string (without a
length) back regardless of the actual length of the initializer which
did not work well in the TrimAtNul==false causing the PR mentioned
below.
Note that the fixed getConstantStringInfo() needed fixes to SelectionDAG
memcpy lowering and may lead to some cases for out-of-bounds
zeroinitializer accesses not getting optimized anymore. So some code
with UB may produce out of bound memory reads now instead of just
producing zeros.
The refactoring "accidentally" fixes http://llvm.org/PR32124
Differential Revision: https://reviews.llvm.org/D32839
llvm-svn: 303461
Summary:
Implements PR889
Removing the virtual table pointer from Value saves 1% of RSS when doing
LTO of llc on Linux. The impact on time was positive, but too noisy to
conclusively say that performance improved. Here is a link to the
spreadsheet with the original data:
https://docs.google.com/spreadsheets/d/1F4FHir0qYnV0MEp2sYYp_BuvnJgWlWPhWOwZ6LbW7W4/edit?usp=sharing
This change makes it invalid to directly delete a Value, User, or
Instruction pointer. Instead, such code can be rewritten to a null check
and a call Value::deleteValue(). Value objects tend to have their
lifetimes managed through iplist, so for the most part, this isn't a big
deal. However, there are some places where LLVM deletes values, and
those places had to be migrated to deleteValue. I have also created
llvm::unique_value, which has a custom deleter, so it can be used in
place of std::unique_ptr<Value>.
I had to add the "DerivedUser" Deleter escape hatch for MemorySSA, which
derives from User outside of lib/IR. Code in IR cannot include MemorySSA
headers or call the MemoryAccess object destructors without introducing
a circular dependency, so we need some level of indirection.
Unfortunately, no class derived from User may have any virtual methods,
because adding a virtual method would break User::getHungOffOperands(),
which assumes that it can find the use list immediately prior to the
User object. I've added a static_assert to the appropriate OperandTraits
templates to help people avoid this trap.
Reviewers: chandlerc, mehdi_amini, pete, dberlin, george.burgess.iv
Reviewed By: chandlerc
Subscribers: krytarowski, eraman, george.burgess.iv, mzolotukhin, Prazek, nlewycky, hans, inglorion, pcc, tejohnson, dberlin, llvm-commits
Differential Revision: https://reviews.llvm.org/D31261
llvm-svn: 303362
ProfileSummaryInfo already checks whether the module has sample profile
in determining profile counts. This will also be useful in inliner to
clean up threshold updates.
llvm-svn: 303204
ARM Neon has native support for half-sized vector registers (64 bits). This
is beneficial for example for 2D and 3D graphics. This patch adds the option
to lower MinVecRegSize from 128 via a TTI in the SLP Vectorizer.
*** Performance Analysis
This change was motivated by some internal benchmarks but it is also
beneficial on SPEC and the LLVM testsuite.
The results are with -O3 and PGO. A negative percentage is an improvement.
The testsuite was run with a sample size of 4.
** SPEC
* CFP2006/482.sphinx3 -3.34%
A pretty hot loop is SLP vectorized resulting in nice instruction reduction.
This used to be a +22% regression before rL299482.
* CFP2000/177.mesa -3.34%
* CINT2000/256.bzip2 +6.97%
My current plan is to extend the fix in rL299482 to i16 which brings the
regression down to +2.5%. There are also other problems with the codegen in
this loop so there is further room for improvement.
** LLVM testsuite
* SingleSource/Benchmarks/Misc/ReedSolomon -10.75%
There are multiple small SLP vectorizations outside the hot code. It's a bit
surprising that it adds up to 10%. Some of this may be code-layout noise.
* MultiSource/Benchmarks/VersaBench/beamformer/beamformer -8.40%
The opt-viewer screenshot can be seen at F3218284. We start at a colder store
but the tree leads us into the hottest loop.
* MultiSource/Applications/lambda-0.1.3/lambda -2.68%
* MultiSource/Benchmarks/Bullet/bullet -2.18%
This is using 3D vectors.
* SingleSource/Benchmarks/Shootout-C++/Shootout-C++-lists +6.67%
Noise, binary is unchanged.
* MultiSource/Benchmarks/Ptrdist/anagram/anagram +4.90%
There is an additional SLP in the cold code. The test runs for ~1sec and
prints out over 2000 lines. This is most likely noise.
* MultiSource/Applications/aha/aha +1.63%
* MultiSource/Applications/JM/lencod/lencod +1.41%
* SingleSource/Benchmarks/Misc/richards_benchmark +1.15%
Differential Revision: https://reviews.llvm.org/D31965
llvm-svn: 303116
This pass uses a new target hook to decide whether or not to expand a particular
intrinsic to the shuffevector sequence.
Differential Revision: https://reviews.llvm.org/D32245
llvm-svn: 302631
This change is required because the notion of count is different for
sample profiling and getProfileCount will need to determine the
underlying profile type.
Differential revision: https://reviews.llvm.org/D33012
llvm-svn: 302597
- This change allows targets to opt-in to using them instead of the log2
shufflevector algorithm.
- The SLP and Loop vectorizers have the common code to do shuffle reductions
factored out into LoopUtils, and now have a unified interface for generating
reductions regardless of the preference of the target. LoopUtils now uses TTI
to determine what kind of reductions the target wants to handle.
- For CodeGen, basic legalization support is added.
Differential Revision: https://reviews.llvm.org/D30086
llvm-svn: 302514
This introduces a new interface for computeKnownBits that returns the KnownBits object instead of requiring it to be pre-constructed and passed in by reference.
This is a much more convenient interface as it doesn't require the caller to figure out the BitWidth to pre-construct the object. It's so convenient that I believe we can use this interface to remove the special ComputeSignBit flavor of computeKnownBits.
As a step towards that idea, this patch replaces all of the internal usages of ComputeSignBit with this new interface. As you can see from the patch there were a couple places where we called ComputeSignBit which really called computeKnownBits, and then called computeKnownBits again directly. I've reduced those places to only making one call to computeKnownBits. I bet there are probably external users that do it too.
A future patch will update the external users and remove the ComputeSignBit interface. I'll also working on moving more locations to the KnownBits returning interface for computeKnownBits.
Differential Revision: https://reviews.llvm.org/D32848
llvm-svn: 302437
Summary: This makes setRange take ConstantRange by rvalue reference since most callers were passing an unnamed temporary ConstantRange. We can then move that ConstantRange into the DenseMap caches. For the callers that weren't passing a temporary, I've added std::move to to the local variable being passed.
Reviewers: sanjoy, mzolotukhin, efriedma
Reviewed By: sanjoy
Subscribers: takuto.ikuta, llvm-commits
Differential Revision: https://reviews.llvm.org/D32943
llvm-svn: 302371
Summary:
When writing a loop pass I made a mistake and hit the assertion
"Unreachable block in loop". Later, I hit an assertion when I called
`BasicBlock::eraseFromParent()` incorrectly: "Use still stuck around
after Def is destroyed". This latter assertion, however, printed out
exactly which value is being deleted and what uses remain, which helped
me debug the issue.
To help people debugging their loop passes in the future, print out
exactly which basic block is unreachable in a loop.
Reviewers: sanjoy, hfinkel, mehdi_amini
Reviewed By: mehdi_amini
Subscribers: mzolotukhin
Differential Revision: https://reviews.llvm.org/D32878
llvm-svn: 302354
wcslen is part of the C99 and C++98 standards.
- This introduces the function to TargetLibraryInfo.
- Also set attributes for wcslen in llvm::inferLibFuncAttributes().
Differential Revision: https://reviews.llvm.org/D32837
llvm-svn: 302278
Summary:
The existing implementation creates a symbolic SCEV expression every
time we analyze a phi node and then has to remove it, when the analysis
is finished. This is very expensive, and in most of the cases it's also
unnecessary. According to the data I collected, ~60-70% of analyzed phi
nodes (measured on SPEC) have the following form:
PN = phi(Start, OP(Self, Constant))
Handling such cases separately significantly speeds this up.
Reviewers: sanjoy, pete
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D32663
llvm-svn: 302096
In cases where an instruction (a call site, say) is RAUW'ed with some
other value (this is possible via the `returned` attribute, for
instance), we want the slot in UnknownInsts to point to the original
Instruction we wanted to track, not the value it got replaced by.
Fixes PR32587.
This relands r301426.
llvm-svn: 301814
Summary:
programUndefinedIfPoison makes more sense, given what the function
does; and I'm about to add a function with a name similar to
isKnownNotFullPoison (so do the rename to avoid confusion).
Reviewers: broune, majnemer, bjarke.roune
Reviewed By: broune
Subscribers: mcrosier, llvm-commits, mzolotukhin
Differential Revision: https://reviews.llvm.org/D30444
llvm-svn: 301776
Summary:
The motivation example is like below which has 13 cases but only 2 distinct targets
```
lor.lhs.false2: ; preds = %if.then
switch i32 %Status, label %if.then27 [
i32 -7012, label %if.end35
i32 -10008, label %if.end35
i32 -10016, label %if.end35
i32 15000, label %if.end35
i32 14013, label %if.end35
i32 10114, label %if.end35
i32 10107, label %if.end35
i32 10105, label %if.end35
i32 10013, label %if.end35
i32 10011, label %if.end35
i32 7008, label %if.end35
i32 7007, label %if.end35
i32 5002, label %if.end35
]
```
which is compiled into a balanced binary tree like this on AArch64 (similar on X86)
```
.LBB853_9: // %lor.lhs.false2
mov w8, #10012
cmp w19, w8
b.gt .LBB853_14
// BB#10: // %lor.lhs.false2
mov w8, #5001
cmp w19, w8
b.gt .LBB853_18
// BB#11: // %lor.lhs.false2
mov w8, #-10016
cmp w19, w8
b.eq .LBB853_23
// BB#12: // %lor.lhs.false2
mov w8, #-10008
cmp w19, w8
b.eq .LBB853_23
// BB#13: // %lor.lhs.false2
mov w8, #-7012
cmp w19, w8
b.eq .LBB853_23
b .LBB853_3
.LBB853_14: // %lor.lhs.false2
mov w8, #14012
cmp w19, w8
b.gt .LBB853_21
// BB#15: // %lor.lhs.false2
mov w8, #-10105
add w8, w19, w8
cmp w8, #9 // =9
b.hi .LBB853_17
// BB#16: // %lor.lhs.false2
orr w9, wzr, #0x1
lsl w8, w9, w8
mov w9, #517
and w8, w8, w9
cbnz w8, .LBB853_23
.LBB853_17: // %lor.lhs.false2
mov w8, #10013
cmp w19, w8
b.eq .LBB853_23
b .LBB853_3
.LBB853_18: // %lor.lhs.false2
mov w8, #-7007
add w8, w19, w8
cmp w8, #2 // =2
b.lo .LBB853_23
// BB#19: // %lor.lhs.false2
mov w8, #5002
cmp w19, w8
b.eq .LBB853_23
// BB#20: // %lor.lhs.false2
mov w8, #10011
cmp w19, w8
b.eq .LBB853_23
b .LBB853_3
.LBB853_21: // %lor.lhs.false2
mov w8, #14013
cmp w19, w8
b.eq .LBB853_23
// BB#22: // %lor.lhs.false2
mov w8, #15000
cmp w19, w8
b.ne .LBB853_3
```
However, the inline cost model estimates the cost to be linear with the number
of distinct targets and the cost of the above switch is just 2 InstrCosts.
The function containing this switch is then inlined about 900 times.
This change use the general way of switch lowering for the inline heuristic. It
etimate the number of case clusters with the suitability check for a jump table
or bit test. Considering the binary search tree built for the clusters, this
change modifies the model to be linear with the size of the balanced binary
tree. The model is off by default for now :
-inline-generic-switch-cost=false
This change was originally proposed by Haicheng in D29870.
Reviewers: hans, bmakam, chandlerc, eraman, haicheng, mcrosier
Reviewed By: hans
Subscribers: joerg, aemerson, llvm-commits, rengolin
Differential Revision: https://reviews.llvm.org/D31085
llvm-svn: 301649
This patch introduces a new KnownBits struct that wraps the two APInt used by computeKnownBits. This allows us to treat them as more of a unit.
Initially I've just altered the signatures of computeKnownBits and InstCombine's simplifyDemandedBits to pass a KnownBits reference instead of two separate APInt references. I'll do similar to the SelectionDAG version of computeKnownBits/simplifyDemandedBits as a separate patch.
I've added a constructor that allows initializing both APInts to the same bit width with a starting value of 0. This reduces the repeated pattern of initializing both APInts. Once place default constructed the APInts so I added a default constructor for those cases.
Going forward I would like to add more methods that will work on the pairs. For example trunc, zext, and sext occur on both APInts together in several places. We should probably add a clear method that can be used to clear both pieces. Maybe a method to check for conflicting information. A method to return (Zero|One) so we don't write it out everywhere. Maybe a method for (Zero|One).isAllOnesValue() to determine if all bits are known. I'm sure there are many other methods we can come up with.
Differential Revision: https://reviews.llvm.org/D32376
llvm-svn: 301432
Commits were:
"Use WeakVH instead of WeakTrackingVH in AliasSetTracker's UnkownInsts"
"Add a new WeakVH value handle; NFC"
"Rename WeakVH to WeakTrackingVH; NFC"
The changes assumed pointers are 8 byte aligned on all architectures.
llvm-svn: 301429
Summary:
In cases where an instruction (a call site, say) is RAUW'ed with some
other value (this is possible via the `returned` attribute, amongst
other things), we want the slot in UnknownInsts to point to the
original Instruction we wanted to track, not the value it got replaced
by.
Fixes PR32587.
Reviewers: davide
Subscribers: mcrosier, llvm-commits
Differential Revision: https://reviews.llvm.org/D32268
llvm-svn: 301426
Summary:
I plan to use WeakVH to mean "nulls itself out on deletion, but does
not track RAUW" in a subsequent commit.
Reviewers: dblaikie, davide
Reviewed By: davide
Subscribers: arsenm, mehdi_amini, mcrosier, mzolotukhin, jfb, llvm-commits, nhaehnle
Differential Revision: https://reviews.llvm.org/D32266
llvm-svn: 301424
Summary:
Expose the internal query structure, start using it.
Note: This is the most minimal change possible i could create. I have
trivial followups, like fixing the one use of const FastMathFlags &,
the renaming of CtxI to be consistent, etc.
This should be NFC.
Reviewers: majnemer, davide
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D32448
llvm-svn: 301379
Use constant references rather than `const auto` which will cause the
copy constructor. These particular cases cause issues for the swift
compiler.
llvm-svn: 301237
Summary: Region objects capture the address of the creating RegionInfo instance. Because the RegionInfo class is movable, moving a RegionInfo object creates dangling references. This patch fixes these references by walking the Regions post-move, and updating references to the new parent.
Reviewers: Meinersbur, grosser
Reviewed By: Meinersbur, grosser
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D31719
llvm-svn: 301175
Use children<> and nodes<> in appropriate places to cleanup the code.
Also, as part of the cleanup,
change the signature of DominatorTreeBase's Split.
It is a protected non-virtual member function called only twice,
both from within the class,
and the removed passed argument in both cases is '*this'.
The reason for the existence of that argument seems to be that
back before r43115 Split was a free function,
so an argument to get '*this' was needed - but now that is no longer the
case.
Patch by Yoav Ben-Shalom!
Differential Revision: https://reviews.llvm.org/D32118
llvm-svn: 300656
BasicAA wants to know if a function is either a malloc or calloc like function. Currently we have to check both separately. This means both calls check if its an intrinsic, query TLI, check the nobuiltin attribute, scan the AllocationFnData, etc.
This patch adds a isMallocOrCallocLikeFn so we can go through all of the checks once per call.
This also changes the one other location I saw that called both together.
Differential Revision: https://reviews.llvm.org/D32188
llvm-svn: 300608
the exponential behavior.
The patch is to fix PR32043. Functions getZeroExtendExpr and getSignExtendExpr
may call themselves recursively more than once. This is potentially a 2^N
complexity behavior. The exponential behavior was not commonly exposed before
because of existing global cache mechnism like UniqueSCEVs or some early return
mechanism when flags FlagNSW or FlagNUW are seen. However, we still have case
which can expose the exponential behavior, like the case in PR32043, so we add
a local cache in getZeroExtendExpr and getSignExtendExpr. If the input of the
functions -- SCEV and type pair have been seen before, we can find the extended
expression directly in the local cache.
Differential Revision: https://reviews.llvm.org/D30350
llvm-svn: 300494
This change really saves just one foldingset lookup, but makes
SCEVRewriteVisitor "feature compatible" with the handwritten logic in
ScalarEvolutionNormalization, so that I can change
ScalarEvolutionNormalization to use SCEVRewriteVisitor in a next step.
This is a non-functional change, but _may_ improve performance in some
pathological cases, but that's unlikely.
llvm-svn: 300348
Looks like earlier I was relying on #include ordering in files that
used ScalarEvolutionNormalization.h.
Found thanks to the selfhost modules buildbot!
llvm-svn: 300336
It is cleaner to have a callback based system where the logic of
whether an add recurrence is normalized or not lives on IVUsers.
This is one step in a multi-step cleanup.
llvm-svn: 300330
Since SystemZ supports vector element load/store instructions, there is no
need for extracts/inserts if a vector load/store gets scalarized.
This patch lets Target specify that it supports such instructions by means of
a new TTI hook that defaults to false.
The use for this is in the LoopVectorizer getScalarizationOverhead() method,
which will with this patch produce a smaller sum for a vector load/store on
SystemZ.
New test: test/Transforms/LoopVectorize/SystemZ/load-store-scalarization-cost.ll
Review: Adam Nemet
https://reviews.llvm.org/D30680
llvm-svn: 300056
getArithmeticInstrCost(), getShuffleCost(), getCastInstrCost(),
getCmpSelInstrCost(), getVectorInstrCost(), getMemoryOpCost(),
getInterleavedMemoryOpCost() implemented.
Interleaved access vectorization enabled.
BasicTTIImpl::getCastInstrCost() improved to check for legal extending loads,
in which case the cost of the z/sext instruction becomes 0.
Review: Ulrich Weigand, Renato Golin.
https://reviews.llvm.org/D29631
llvm-svn: 300052
and to expose a handle to represent the actual case rather than having
the iterator return a reference to itself.
All of this allows the iterator to be used with common STL facilities,
standard algorithms, etc.
Doing this exposed some missing facilities in the iterator facade that
I've fixed and required some work to the actual iterator to fully
support the necessary API.
Differential Revision: https://reviews.llvm.org/D31548
llvm-svn: 300032
Collection of PostDominatedByUnreachable and PostDominatedByColdCall have been
split out of heuristics itself. Update of the data happens now for each basic
block (before update for PostDominatedByColdCall might be skipped if
unreachable or matadata heuristic handled this basic block).
This separation allows re-ordering of heuristics without loosing
the post-domination information.
Reviewers: sanjoy, junbuml, vsk, chandlerc, reames
Reviewed By: chandlerc
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D31701
llvm-svn: 300029
Analysis, it has Analysis passes, and once NewGVN is made an Analysis,
this removes the cross dependency from Analysis to Transform/Utils.
NFC.
llvm-svn: 299980
Summary:
getModRefInfo is meant to answer the question "what impact does this
instruction have on a given memory location" (not even another
instruction).
Long debate on this on IRC comes to the conclusion the answer should be "nothing special".
That is, a noalias volatile store does not affect a memory location
just by being volatile. Note: DSE and GVN and memdep currently
believe this, because memdep just goes behind AA's back after it says
"modref" right now.
see line 635 of memdep. Prior to this patch we would get modref there, then check aliasing,
and if it said noalias, we would continue.
getModRefInfo *already* has this same AA check, it just wasn't being used because volatile was
lumped in with ordering.
(I am separately testing whether this code in memdep is now dead except for the invariant load case)
Reviewers: jyknight, chandlerc
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D31726
llvm-svn: 299741
Summary:
Add a hook for simplification of shufflevector's with the following rules:
- Constant folding - NFC, as it was already being done by the default handler.
- If only one of the operands is constant, constant fold the shuffle if the
mask does not select elements from the variable operand - to show the hook is firing and affecting the test-cases.
Reviewers: RKSimon, craig.topper, spatel, sanjoy, nlopes, majnemer
Reviewed By: spatel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D31525
llvm-svn: 299393
Summary:
Move the aarch64-type-promotion pass within the existing type promotion framework in CGP.
This change also support forking sexts when a new sext is required for promotion.
Note that change is based on D27853 and I am submitting this out early to provide a better idea on D27853.
Reviewers: jmolloy, mcrosier, javed.absar, qcolombet
Reviewed By: qcolombet
Subscribers: llvm-commits, aemerson, rengolin, mcrosier
Differential Revision: https://reviews.llvm.org/D28680
llvm-svn: 299379
The patch rL298481 was reverted due to crash on clang-with-lto-ubuntu build.
The reason of the crash was type mismatch between either a or b and RHS in the following situation:
LHS = sext(a +nsw b) > RHS.
This is quite rare, but still possible situation. Normally we need to cast all {a, b, RHS} to their widest type.
But we try to avoid creation of new SCEV that are not constants to avoid initiating recursive analysis that
can take a lot of time and/or cache a bad value for iterations number. To deal with this, in this patch we
reject this case and will not try to analyze it if the type of sum doesn't match with the type of RHS. In this
situation we don't need to create any non-constant SCEVs.
This patch also adds an assertion to the method IsProvedViaContext so that we could fail on it and not
go further into range analysis etc (because in some situations these analyzes succeed even when the passed
arguments have wrong types, what should not normally happen).
The patch also contains a fix for a problem with too narrow scope of the analysis caused by wrong
usage of predicates in recursive invocations.
The regression test on the said failure: test/Analysis/ScalarEvolution/implied-via-addition.ll
Reviewers: reames, apilipenko, anna, sanjoy
Reviewed By: sanjoy
Subscribers: mzolotukhin, mehdi_amini, llvm-commits
Differential Revision: https://reviews.llvm.org/D31238
llvm-svn: 299205
SimplifyDemandedUseBits for Add/Sub already recursed down LHS and RHS for simplifying bits. If that didn't provide any simplifications we fall back to calling computeKnownBits which will recurse again. Instead just take the known bits for LHS and RHS we already have and call into a new function in ValueTracking that can calculate the known bits given the LHS/RHS bits.
llvm-svn: 298711
The patch rL298481 was reverted due to crash on clang-with-lto-ubuntu build.
The reason of the crash was type mismatch between either a or b and RHS in the following situation:
LHS = sext(a +nsw b) > RHS.
This is quite rare, but still possible situation. Normally we need to cast all {a, b, RHS} to their widest type.
But we try to avoid creation of new SCEV that are not constants to avoid initiating recursive analysis that
can take a lot of time and/or cache a bad value for iterations number. To deal with this, in this patch we
reject this case and will not try to analyze it if the type of sum doesn't match with the type of RHS. In this
situation we don't need to create any non-constant SCEVs.
This patch also adds an assertion to the method IsProvedViaContext so that we could fail on it and not
go further into range analysis etc (because in some situations these analyzes succeed even when the passed
arguments have wrong types, what should not normally happen).
The patch also contains a fix for a problem with too narrow scope of the analysis caused by wrong
usage of predicates in recursive invocations.
The regression test on the said failure: test/Analysis/ScalarEvolution/implied-via-addition.ll
llvm-svn: 298690
Summary: The current prefix based function layout algorithm only looks at function's entry count, which is not sufficient. A function should be grouped together if its entry count or any call edge count is hot.
Reviewers: davidxl, eraman
Reviewed By: eraman
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D31225
llvm-svn: 298656
Summary:
Adding a printer pass for printing the LVI cache values after transformations
that use LVI.
This will help us in identifying cases where LVI
invariants are violated, or transforms that leave LVI in an incorrect state.
Right now, I have added two test cases to show that the printer pass is working.
I will be adding more test cases in a later change, once this change is
checked in upstream.
Reviewers: reames, dberlin, sanjoy, apilipenko
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D30790
llvm-svn: 298542
This patch allows SCEV predicate analysis to prove implication of some expression predicates
from context predicates related to arguments of those expressions.
It introduces three new rules:
For addition:
(A >X && B >= 0) || (B >= 0 && A > X) ===> (A + B) > X.
For division:
(A > X) && (0 < B <= X + 1) ===> (A / B > 0).
(A > X) && (-B <= X < 0) ===> (A / B >= 0).
Using these rules, SCEV is able to prove facts like "if X > 1 then X / 2 > 0".
They can also be combined with the same context, to prove more complex expressions like
"if X > 1 then X/2 + 1 > 1".
Diffirential Revision: https://reviews.llvm.org/D30887
Reviewed by: sanjoy
llvm-svn: 298481
This adds a parameter to @llvm.objectsize that makes it return
conservative values if it's given null.
This fixes PR23277.
Differential Revision: https://reviews.llvm.org/D28494
llvm-svn: 298430
Summary:
Extract FindAvailablePtrLoadStore out of FindAvailableLoadedValue.
Prepare for upcoming change which will do phi-translation for load on
phi pointer in jump threading SimplifyPartiallyRedundantLoad.
This is in preparation for https://reviews.llvm.org/D30543
Reviewers: efriedma, sanjoy, davide, dberlin
Reviewed By: davide
Subscribers: junbuml, davide, llvm-commits
Differential Revision: https://reviews.llvm.org/D30524
llvm-svn: 298216
getIntrinsicInstrCost() used to only compute scalarization cost based on types.
This patch improves this so that the actual arguments are checked when they are
available, in order to handle only unique non-constant operands.
Tests updates:
Analysis/CostModel/X86/arith-fp.ll
Transforms/LoopVectorize/AArch64/interleaved_cost.ll
Transforms/LoopVectorize/ARM/interleaved_cost.ll
The improvement in getOperandsScalarizationOverhead() to differentiate on
constants made it necessary to update the interleaved_cost.ll tests even
though they do not relate to intrinsics.
Review: Hal Finkel
https://reviews.llvm.org/D29540
llvm-svn: 297705
Summary:
This change solves the same problem as D30726, except that this only
throws out the bathwater.
AST was not correctly tracking and deleting UnknownInstructions via
handles. The existing code only tracks "pointers" in its
`ASTCallbackVH`, so an UnknownInstruction (that isn't also def'ing a
pointer used by another memory instruction) never gets a
`ASTCallbackVH`.
There are two other ways to solve this problem:
- Use the `PointerRec` scheme for both known and unknown instructions.
- Use a `CallbackVH` that erases the offending Instruction from the
UnknownInstruction list.
Both of the above changes seemed to be significantly (and unnecessarily
IMO) more complex than this.
Reviewers: chandlerc, dberlin, hfinkel, reames
Subscribers: mcrosier, llvm-commits
Differential Revision: https://reviews.llvm.org/D30849
llvm-svn: 297539
Summary: There is no need to check profile count as only CallInst will have metadata attached.
Reviewers: eraman
Reviewed By: eraman
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D30799
llvm-svn: 297500
This reverts r293386, r294027, r294029 and r296411.
Turns out the SLP tree isn't actually a "tree" and we don't handle
accessing the same packet of loads in several different orders well,
causing miscompiles.
Revert until we can fix this properly.
llvm-svn: 297493
for VectorizeTree() API.This API uses it for proper mask computation to be used in shufflevector IR.
The fix is to compute the mask for out of order memory accesses while building the vectorizable tree
instead of actual vectorization of vectorizable tree.It also needs to recompute the proper Lane for
external use of vectorizable scalars based on shuffle mask.
Reviewers: mkuper
Differential Revision: https://reviews.llvm.org/D30159
Change-Id: Ide8773ce0ad3562f3cf4d1a0ad0f487e2f60ce5d
llvm-svn: 296863
for VectorizeTree() API.This API uses it for proper mask computation to be used in shufflevector IR.
The fix is to compute the mask for out of order memory accesses while building the vectorizable tree
instead of actual vectorization of vectorizable tree.
Reviewers: mkuper
Differential Revision: https://reviews.llvm.org/D30159
Change-Id: Id1e287f073fa4959713ba545fa4254db5da8b40d
llvm-svn: 296575
Last use was killed in my previous patch. The preferred way is now to
construct the remark, pipe things to it and pass it to ORE.emit.
llvm-svn: 296019
This needed a const_cast for the dominator tree recalculation in
OptimizationRemarkEmitter, but we do that all over the place already
and it's safe.
llvm-svn: 295812
This is a short term solution to the problem that many passes currently fail
to update the assumption cache. In the long term the verifier should not
be controllable with a flag. We should either fix all passes to correctly
update the assumption cache and enable the verifier unconditionally or
somehow arrange for the assumption list to be updated automatically by passes.
Differential Revision: https://reviews.llvm.org/D30003
llvm-svn: 295236
The comment was somewhat misleading in that it implied that passes were not
responsible for adding new assumptions to the assumption cache. This new
wording now explicitly mentions that they are required to do so.
Differential Revision: https://reviews.llvm.org/D29977
llvm-svn: 295148
And use it in MachineOptimizationRemarkEmitter. A test will follow on top of
Justin's changes to enable MachineORE in AsmPrinter.
The approach is similar to the IR-level pass. It's a bit simpler because BPI
is immutable at the Machine level so we don't need to make that lazy.
Because of this, a new function mapping is introduced (BPIPassTrait::getBPI).
This function extracts BPI from the pass. In case of the lazy pass, this is
when the calculation of the BFI occurs. For Machine-level, this is the
identity function.
Differential Revision: https://reviews.llvm.org/D29836
llvm-svn: 295072
disturbing the graph or having to update edges.
This is motivated by porting argument promotion to the new pass manager.
Because of how LLVM IR Function objects work, in order to change their
signature a new object needs to be created. This is efficient and
straight forward in the IR but previously was very hard to implement in
LCG. We could easily replace the function a node in the graph
represents. The challenging part is how to handle updating the edges in
the graph.
LCG previously used an edge to a raw function to represent a node that
had not yet been scanned for calls and references. This was the core
of its laziness. However, that model causes this kind of update to be
very hard:
1) The keys to lookup an edge need to be `Function*`s that would all
need to be updated when we update the node.
2) There will be some unknown number of edges that haven't transitioned
from `Function*` edges to `Node*` edges.
All of this complexity isn't necessary. Instead, we can always build
a node around any function, always pointing edges at it and always using
it as the key to lookup an edge. To maintain the laziness, we need to
sink the *edges* of a node into a secondary object and explicitly model
transitioning a node from empty to populated by scanning the function.
This design seems much cleaner in a number of ways, but importantly
there is now exactly *one* place where the `Function*` has to be
updated!
Some other cleanups that fall out of this include having something to
model the *entry* edges more accurately. Rather than hand rolling parts
of the node in the graph itself, we have an explicit `EdgeSequence`
object that gives us exactly the functionality needed. We also have
a consistent place to define the edge iterators and can use them for
both the entry edges and the internal edges of the graph.
The API used to model the separation between a node and its edges is
intentionally very thin as most clients are expected to deal with nodes
that have populated edges. We model this exactly as an optional does
with an additional method to populate the edges when that is
a reasonable thing for a client to do. This is based on API design
suggestions from Richard Smith and David Blaikie, credit goes to them
for helping pick how to model this without it being either too explicit
or too implicit.
The patch is somewhat noisy due to shifting around iterator types and
new syntax for walking the edges of a node, but most of the
functionality change is in the `Edge`, `EdgeSequence`, and `Node` types.
Differential Revision: https://reviews.llvm.org/D29577
llvm-svn: 294653
passed into CRTP base classes.
This can sometimes happen and not cause an immediate failure when the
derived class is, itself, a template. You can end up essentially calling
methods on the wrong derived type but a type where many things will
appear to "work".
To fail fast and with a clear error message we can use a static_assert,
but we have to stash that static_assert inside a method body or nested
type that won't need to be completed while building the base class. I've
tried to pick a reasonably small number of places that seemed like
reliably places for this to be instantiated.
llvm-svn: 294272
The patch committed in r293017, as discussed on the list, doesn't really
make sense but was causing an actual issue to go away.
The issue turns out to be that in one place the extra template arguments
were dropped from the OuterAnalysisManagerProxy. This in turn caused the
types used in one set of places to access the key to be completely
different from the types used in another set of places for both Loop and
CGSCC cases where there are extra arguments.
I have literally no idea how anything seemed to work with this bug in
place. It blows my mind. But it did except for mingw64 in a DLL build.
I've added a really handy static assert that helps ensure we don't break
this in the future. It immediately diagnoses the issue with a compile
failure and a very clear error message. Much better that staring at
backtraces on a build bot. =]
llvm-svn: 294267
Summary: Checking CS.getCalledFunction() == nullptr does not necessary indicate indirect call. We also need to check if CS.getCalledValue() is not a constant.
Reviewers: davidxl
Reviewed By: davidxl
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D29570
llvm-svn: 294260
iteration.
The lazy formation of RefSCCs isn't really the most important part of
the laziness here -- that has to do with walking the functions
themselves -- and isn't essential to maintain. Originally, there were
incremental update algorithms that relied on updates happening
predominantly near the most recent RefSCC formed, but those have been
replaced with ones that have much tighter general case bounds at this
point. We do still perform asserts that only scale well due to this
incrementality, but those are easy to place behind EXPENSIVE_CHECKS.
Removing this simplifies the entire analysis by having a single up-front
step that builds all of the RefSCCs in a direct Tarjan walk. We can even
easily replace this with other or better algorithms at will and with
much less confusion now that there is no iterator-based incremental
logic involved. This removes a lot of complexity from LCG.
Another advantage of moving in this direction is that it simplifies
testing the system substantially as we no longer have to worry about
observing and mutating the graph half-way through the RefSCC formation.
We still need a somewhat special iterator for RefSCCs because we want
the iterator to remain stable in the face of graph updates. However,
this now merely involves relative indexing to the current RefSCC's
position in the sequence which isn't too hard.
Differential Revision: https://reviews.llvm.org/D29381
llvm-svn: 294227
for a quite big function with source like
%add = add nsw i32 %mul, %conv
%mul1 = mul nsw i32 %add, %conv
%add2 = add nsw i32 %mul1, %add
%mul3 = mul nsw i32 %add2, %add
; repeat couple of thousands times
that can be produced by loop unroll, getAddExpr() tries to recursively construct SCEV and runs almost infinite time.
Added recursion depth restriction (with new parameter to set it)
Reviewers: sanjoy
Subscribers: hfinkel, llvm-commits, mzolotukhin
Differential Revision: https://reviews.llvm.org/D28158
llvm-svn: 294181
This generalizes memory access sorting to use differences between SCEVs,
instead of relying on constant offsets. That allows us to properly do
SLP vectorization of non-sequentially ordered loads within loops bodies.
Differential Revision: https://reviews.llvm.org/D29425
llvm-svn: 294027
Summary: While scanning predecessors to find an available loaded value, if the predecessor has a single predecessor, we can continue scanning through the single predecessor.
Reviewers: mcrosier, rengolin, reames, davidxl, haicheng
Reviewed By: rengolin
Subscribers: zzheng, llvm-commits
Differential Revision: https://reviews.llvm.org/D29200
llvm-svn: 293896
This patch moves some helper functions related to interleaved access
vectorization out of LoopVectorize.cpp and into VectorUtils.cpp. We would like
to use these functions in a follow-on patch that improves interleaved load and
store lowering in (ARM/AArch64)ISelLowering.cpp. One of the functions was
already duplicated there and has been removed.
Differential Revision: https://reviews.llvm.org/D29398
llvm-svn: 293788
The jumbled scalar loads will be sorted while building the tree and these accesses will be marked to generate shufflevector after the vectorized load with proper mask.
Reviewers: hfinkel, mssimpso, mkuper
Differential Revision: https://reviews.llvm.org/D26905
Change-Id: I9c0c8e6f91a00076a7ee1465440a3f6ae092f7ad
llvm-svn: 293386
Refactoring to remove duplications of this method.
New method getOperandsScalarizationOverhead() that looks at the present unique
operands and add extract costs for them. Old behaviour was to just add extract
costs for one operand of the type always, which still happens in
getArithmeticInstrCost() if no operands are provided by the caller.
This is a good start of improving on this, but there are more places
that can be improved by using getOperandsScalarizationOverhead().
Review: Hal Finkel
https://reviews.llvm.org/D29017
llvm-svn: 293155
directly walks the current loop structure verifying that a matching
structure can be found in a freshly computed version.
Also pull things out of containers when necessary once an issue is found
and print them directly.
This makes it substantially easier to debug verification failures as
the process stops at the exact point in the loop nest where they diverge
and has in easily accessed local variables (or printed to stderr
already) the loops and other information needed to analyze the failure.
Differential Revision: https://reviews.llvm.org/D29142
llvm-svn: 293133
This allows MIR passes to emit optimization remarks with the same level
of functionality that is available to IR passes.
It also hooks up the greedy register allocator to report spills. This
allows for interesting use cases like increasing interleaving on a loop
until spilling of registers is observed.
I still need to experiment whether reporting every spill scales but this
demonstrates for now that the functionality works from llc
using -pass-remarks*=<pass>.
Differential Revision: https://reviews.llvm.org/D29004
llvm-svn: 293110
Code region is the only part of this class that is IR-specific. Code
region is moved down in the inheritance tree to a new derived class,
called DiagnosticInfoIROptimization.
All the existing remarks are derived from this new class now.
This allows the new MIR pass-remark classes to be derived from
DiagnosticInfoOptimizationBase.
Also because we keep the name DiagnosticInfoOptimizationBase, the clang
parts don't need any adjustment.
Differential Revision: https://reviews.llvm.org/D29003
llvm-svn: 293109
I found root class should be instantiated for variadic tempate to instantiate static member explicitly.
This will fix failures in mingw DLL build.
llvm-svn: 293017
a lazy-asserting PoisoningVH.
AssertVH is fundamentally incompatible with cache-invalidation of
analysis results. The invaliadtion happens after the AssertingVH has
already fired. Instead, use a PoisoningVH that will assert if the
dangling handle is ever used rather than merely be assigned or
destroyed.
This patch also removes all of the (numerous) doomed attempts to work
around this fundamental incompatibility. It is a pretty significant
simplification IMO.
The most interesting change is in the Inliner where we still do some
clearing because we don't want to rely on the coarse grained
invalidation strategy of the containing pass manager. However, I prefer
the approach that contains this logic to the cleanup phase of the
Inliner, and I think we could enhance the CGSCC analysis management
layer to make this even better in the future if desired.
The rest is straight cleanup.
I've also added a test for one of the harder cases to work around: when
a *module analysis* contains many AssertingVHes pointing at functions.
Differential Revision: https://reviews.llvm.org/D29006
llvm-svn: 292928
Summary:
The LibFunc::Func enum holds enumerators named for libc functions.
Unfortunately, there are real situations, including libc implementations, where
function names are actually macros (musl uses "#define fopen64 fopen", for
example; any other transitively visible macro would have similar effects).
Strictly speaking, a conforming C++ Standard Library should provide any such
macros as functions instead (via <cstdio>). However, there are some "library"
functions which are not part of the standard, and thus not subject to this
rule (fopen64, for example). So, in order to be both portable and consistent,
the enum should not use the bare function names.
The old enum naming used a namespace LibFunc and an enum Func, with bare
enumerators. This patch changes LibFunc to be an enum with enumerators prefixed
with "LibFFunc_". (Unfortunately, a scoped enum is not sufficient to override
macros.)
There are additional changes required in clang.
Reviewers: rsmith
Subscribers: mehdi_amini, mzolotukhin, nemanjai, llvm-commits
Differential Revision: https://reviews.llvm.org/D28476
llvm-svn: 292848
