Global initializers may be ConstantArrays. They need to be checked
explicitly, because different-yet-still-equivalent type names may be
used for each, and/or a GEP instruction may appear in one.
The only wrinkle is that we can't process the "blockaddress" arguments
of the callbr until the blocks have been equated. So we force them to be
"unified" before checking.
This was left out when the callbr instruction was added.
Differential Revision: https://reviews.llvm.org/D104606
0 latency instructions now get processed and retired properly within the in-order pipeline. Had to fix a bug within TimelineView.cpp as well that would show up when a 0 latency instruction was the first instruction in the source.
Differential Revision: https://reviews.llvm.org/D104675
Some APIs work with const variables while others don't. This can cause
conflicts when calling one from the other.
This is NFC.
Differential Revision: https://reviews.llvm.org/D104719
These serve as a convenient combination of consume_front/back and
startswith_lower/endswith_lower, consistent with other existing
case insensitive methods named <operation>_lower.
Differential Revision: https://reviews.llvm.org/D104218
Add a parameter of IsFSDiscriminator to function
getBaseDiscriminatorFromDiscriminator().
This function currently checks the internal flag of
--enable-fs-discriminator. This is not good because we might
change the default value of the internal flag.
Note that we have a default parameter. This is just
because create_afdo_tool has a call-site to it.
I will remove the default parameter in a later patch.
Differential Revision: https://reviews.llvm.org/D104584
The argument reduction pass shouldn't remove arguments of
intrinsics, because the resulting module is ill-formed, and so
inherently uninteresting.
Reviewed By: aeubanks
Differential Revision: https://reviews.llvm.org/D103129
This makes it more convenient to get a text format profile.
Add an error for printing non-text format output to a terminal for instrumentation profile.
(It cannot be portably tested. For sample profile, raw_fd_ostream is hidden deeply so it's inconvenient to add a diagnostic.)
Reviewed By: davidxl
Differential Revision: https://reviews.llvm.org/D104600
As a follow-up to https://reviews.llvm.org/D104129, I'm cleaning up the danling probe related code in both the compiler and llvm-profgen.
I'm seeing a 5% size win for the pseudo_probe section for SPEC2017 and 10% for Ciner. Certain benchmark such as 602.gcc has a 20% size win. No obvious difference seen on build time for SPEC2017 and Cinder.
Reviewed By: wenlei
Differential Revision: https://reviews.llvm.org/D104477
We were using 0 as an indicator of invalid offset when computing disjoint ranges. In reality, 0 can be an valid code offset which stands for the first function in .text section. I'm using UINT64_MAX as an invalid code offset instead.
Reviewed By: wenlei
Differential Revision: https://reviews.llvm.org/D104497
If we have seen an inwards transition from external code to internal code, but not a following outwards transition, the inwards transition is likely due to interrupt which is usually unpaired. Ignore current and subsequent entries since they are likely from an unrelated pre-interrupt context.
LBR records from different interrupt context are unrelated and they should not be mixed together. Currenlty the OS does this for task-scheduling interrupt but not for all interrupts.
Reviewed By: wenlei, wlei
Differential Revision: https://reviews.llvm.org/D104276
We were using a `StringMap` object to store all profiles to be emitted. The object is basically an unordered hash table, therefore updating it in the process of trasvering it may cause issue since the underlying bucket array could change.
I'm also moving the `csspgo-preinliner` switch around so that no context tri will be constructed (by the constructor of `CSPreInliner`) when the switch is off.
Reviewed By: wenlei
Differential Revision: https://reviews.llvm.org/D104267
Put the dtor of mca::CustomBehaviour into the cpp file to avoid
undefined vtable when linking libLLVMMCACustomBehaviourAMDGPU as shared
library.
Differential Revision: https://reviews.llvm.org/D104401
Previously dangling samples were represented by INT64_MAX in sample profile while probes never executed were not reported. This was based on an observation that dangling probes were only at a smaller portion than zero-count probes. However, with compiler optimizations, dangling probes end up becoming at large portion of all probes in general and reporting them does not make sense from profile size point of view. This change flips sample reporting by reporting zero-count probes instead. This enabled dangling probe to be represented by none (missing entry in profile). This has a couple benefits:
1. Reducing sample profile size in optimize mode, even when the number of non-executed probes outperform the number of dangling probes, since INT64_MAX takes more space over 0 to encode.
2. Binary size savings. No need to encode dangling probe anymore, since missing probes are treated as dangling in the profile reader.
3. Reducing compiler work to track dangling probes. However, for probes that are real dead and removed, we still need the compiler to identify them so that they can be reported as zero-count, instead of mistreated as dangling probes.
4. Improving counts quality by respecting the counts already collected on the non-dangling copy of a probe. A probe, when duplicated, gets two copies at runtime. If one of them is dangling while the other is not, merging the two probes at profile generation time will cause the real samples collected on the non-dangling one to be discarded. Not reporting the dangling counterpart will keep the real samples.
5. Better readability.
6. Be consistent with non-CS dwarf line number based profile. Zero counts are trusted by the compiler counts inferencer while missing counts will be inferred by the compiler.
Note that the current patch does include any work for #3. There will be follow-up changes.
For #1, I've seen for a large Facebook service, the text profile is reduced by 7%. For extbinary profile, the size of LBRProfileSection is reduced by 35%.
For #4, I have seen general counts quality for SPEC2017 is improved by 10%.
Reviewed By: wenlei, wlei, wmi
Differential Revision: https://reviews.llvm.org/D104129
There is no need to differentiate whether `UseSegments` is true or
false. Unifying the cases makes the behavior closer to BinaryWriter.
This improves compatibility with objcopy because SHF_ALLOC sections not in
a PT_LOAD will not be skipped. Such cases are usually erroneous input, though.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D104186
The original change was pushed in main as commit f7a23ecece52.
It was then reverted by commit a04f01bab2 because it caused linker failures
on buildbots that don't build the AMDGPU target.
--
Some instructions are not defined well enough within the target’s scheduling
model for llvm-mca to be able to properly simulate its behaviour. The ideal
solution to this situation is to modify the scheduling model, but that’s not
always a viable strategy. Maybe other parts of the backend depend on that
instruction being modelled the way that it is. Or maybe the instruction is quite
complex and it’s difficult to fully capture its behaviour with tablegen. The
CustomBehaviour class (which I will refer to as CB frequently) is designed to
provide intuitive scaffolding for developers to implement the correct modelling
for these instructions.
More details are available in the original commit log message (f7a23ecece52).
Differential Revision: https://reviews.llvm.org/D104149
This patch adds support for a new field in the FileHeader, which states
the name to use for the section header string table. This also allows
combining the string table with another string table in the object, e.g.
the symbol name string table. The field is optional. By default,
.shstrtab will continue to be used.
This partially fixes https://bugs.llvm.org/show_bug.cgi?id=50506.
Reviewed by: Higuoxing
Differential Revision: https://reviews.llvm.org/D104035
Some instructions are not defined well enough within the target’s scheduling
model for llvm-mca to be able to properly simulate its behaviour. The ideal
solution to this situation is to modify the scheduling model, but that’s not
always a viable strategy. Maybe other parts of the backend depend on that
instruction being modelled the way that it is. Or maybe the instruction is quite
complex and it’s difficult to fully capture its behaviour with tablegen. The
CustomBehaviour class (which I will refer to as CB frequently) is designed to
provide intuitive scaffolding for developers to implement the correct modelling
for these instructions.
Implementation details:
llvm-mca does its best to extract relevant register, resource, and memory
information from every MCInst when lowering them to an mca::Instruction. It then
uses this information to detect dependencies and simulate stalls within the
pipeline. For some instructions, the information that gets captured within the
mca::Instruction is not enough for mca to simulate them properly. In these
cases, there are two main possibilities:
1. The instruction has a dependency that isn’t detected by mca.
2. mca is incorrectly enforcing a dependency that shouldn’t exist.
For the rest of this discussion, I will be focusing on (1), but I have put some
thought into (2) and I may revisit it in the future.
So we have an instruction that has dependencies that aren’t picked up by mca.
The basic idea for both pipelines in mca is that when an instruction wants to be
dispatched, we first check for register hazards and then we check for resource
hazards. This is where CB is injected. If no register or resource hazards have
been detected, we make a call to CustomBehaviour::checkCustomHazard() to give
the target specific CB the chance to detect and enforce any custom dependencies.
The return value for checkCustomHazaard() is an unsigned int representing the
(minimum) number of cycles that the instruction needs to stall for. It’s fine to
underestimate this value because when StallCycles gets down to 0, we’ll end up
checking for all the hazards again before the instruction is actually
dispatched. However, it’s important not to overestimate the value and the more
accurate your estimate is, the more efficient mca’s execution can be.
In general, for checkCustomHazard() to be able to detect these custom
dependencies, it needs information about the current instruction and also all of
the instructions that are still executing within the pipeline. The mca pipeline
uses mca::Instruction rather than MCInst and the current information encoded
within each mca::Instruction isn’t sufficient for my use cases. I had to add a
few extra attributes to the mca::Instruction class and have them get set by the
MCInst during instruction building. For example, the current mca::Instruction
doesn’t know its opcode, and it also doesn’t know anything about its immediate
operands (both of which I had to add to the class).
With information about the current instruction, a list of all currently
executing instructions, and some target specific objects (MCSubtargetInfo and
MCInstrInfo which the base CB class has references to), developers should be
able to detect and enforce most custom dependencies within checkCustomHazard. If
you need more information than is present in the mca::Instruction, feel free to
add attributes to that class and have them set during the lowering sequence from
MCInst.
Fortunately, in the in-order pipeline, it’s very convenient for us to pass these
arguments to checkCustomHazard. The hazard checking is taken care of within
InOrderIssueStage::canExecute(). This function takes a const InstRef as a
parameter (representing the instruction that currently wants to be dispatched)
and the InOrderIssueStage class maintains a SmallVector<InstRef, 4> which holds
all of the currently executing instructions. For the out-of-order pipeline, it’s
a bit trickier to get the list of executing instructions and this is why I have
held off on implementing it myself. This is the main topic I will bring up when
I eventually make a post to discuss and ask for feedback.
CB is a base class where targets implement their own derived classes. If a
target specific CB does not exist (or we pass in the -disable-cb flag), the base
class is used. This base class trivially returns 0 from its checkCustomHazard()
implementation (meaning that the current instruction needs to stall for 0 cycles
aka no hazard is detected). For this reason, targets or users who choose not to
use CB shouldn’t see any negative impacts to accuracy or performance (in
comparison to pre-patch llvm-mca).
Differential Revision: https://reviews.llvm.org/D104149
As was reported on PR50620, the X86LbrCounter destructor was double-closing the filedescriptor and not unmapping the buffer.
Differential Revision: https://reviews.llvm.org/D104201
This change provides the option to merge and aggregate cold context by the last k frames instead of context-less name. By default K = 1 means the context-less one.
This is for better perf tuning. The more selective merging and trimming will rely on llvm-profgen's preinliner.
Reviewed By: wenlei, hoy
Differential Revision: https://reviews.llvm.org/D104131
Since this only comes up with inputs containing sections at least 4GB
large (I guess I could use a bzero section or something, so the input
file doesn't have to be 4GB, but even then the output file would have to
be 4GB, right?) I've skipped testing this. If there's a nice way to test
this without needing 4GB inputs or output files.
The subtlety here is demonstrated by this code:
struct t { operator uint64_t(); };
static_assert(std::is_same_v<int, decltype(std::declval<bool>() ? 0 : std::declval<t>())>);
static_assert(std::is_same_v<uint64_t, decltype(std::declval<bool>() ? 0 : std::declval<uint64_t>())>);
Because of this difference, the original source code was getting an int
type (truncating the actual size) and then extending it again, resulting
in bogus values (I haven't thought through this hard enough to explain
why the resulting value was 0xffff... - sign extension, possible UB, but
in any case it's the wrong answer - in this particular case I was
looking at that resulted in a size so large that we couldn't open a file
large enough to write to and ended up with a rather vague:
error: 'file_name.o': Invalid argument
IHexWriter was evaluating a section's physical address when deciding if
that section should be written to an output. This approach does not
account for a zero-sized section that has the same physical address as a
sized section. The behavior varies from GNU objcopy, and may result in a
HEX file that does not include all program sections.
The IHexWriter now excludes zero-sized sections when deciding what
should be written to the output. This affects the contents of the
writer's `Sections` collection; we will not try to insert multiple
sections that could have the same physical address. The behavior seems
consistent with GNU objcopy, which always excludes empty sections,
no matter the address.
The new test case evaluates the IHexWriter behavior when provided a
variety of empty sections that overlap or append a filled section. See
the input file's comments for more information. Given that test input,
and the change to the IHexWriter, GNU objcopy and llvm-objcopy produce
the same output.
Reviewed By: jhenderson, MaskRay, evgeny777
Differential Revision: https://reviews.llvm.org/D101332
This is a similarity visualization tool that accepts a Module and
passes it to the IRSimilarityIdentifier. The resulting SimilarityGroups
are output in a JSON file.
Tests are found in test/tools/llvm-sim and check for the file not found,
a bad module, and that the JSON is created correctly.
Reviewers: paquette, jroelofs, MaskRay
Recommit of: 15645d044bcfe2a0f63156048b302f997a717688 to fix linking
errors.
Differential Revision: https://reviews.llvm.org/D86974
<string> is currently the highest impact header in a clang+llvm build:
https://commondatastorage.googleapis.com/chromium-browser-clang/llvm-include-analysis.html
One of the most common places this is being included is the APInt.h header, which needs it for an old toString() implementation that returns std::string - an inefficient method compared to the SmallString versions that it actually wraps.
This patch replaces these APInt/APSInt methods with a pair of llvm::toString() helpers inside StringExtras.h, adjusts users accordingly and removes the <string> from APInt.h - I was hoping that more of these users could be converted to use the SmallString methods, but it appears that most end up creating a std::string anyhow. I avoided trying to use the raw_ostream << operators as well as I didn't want to lose having the integer radix explicit in the code.
Differential Revision: https://reviews.llvm.org/D103888
This has been reported several times by the PVS Studio team as well as coming up in some static analysis.
getRandom() % 1 always returns 0 so we never actually test this codepath, (git blame suggests this has always been like this) - given that we have plenty of other "getRandom() & 1" the typo is pretty obvious, and matches the intention in the comment above - with this change we generate a nice mixture of scalar/vector condition selects of vectors.
I don't know llvm-stress that well - but I don't think we guarantee that the same seed value will always generate the same IR for later versions of the program - just that the same binary would.
Differential Revision: https://reviews.llvm.org/D104022
On CMake versions greater that >= 3.16 on AIX, shared libraries are
created as archives (which is the normal form for the platform). However
plugins libraries which are passed directly to a executable, like
libLTO to the linker, are usual build as plain `.so`, so this patch
restores this behaviour for libLTO on AIX (and adjust the name if need be
to account for the fact that llvm_add_library likes to force an empty
name prefix on modules), so we end up with the expected libLTO.so
Reviewed By: w2yehia
Differential Revision: https://reviews.llvm.org/D103824
This is relanding commit d1d36f7ad2ae82bea8a6fcc40d6c42a72e21f096 .
This patch additionally addresses failures found in buildbots due to unstable build ordering & post review comments.
This patch introduces a new tool, llvm-tapi-diff, that compares and returns the diff of two TBD files.
Reviewed By: ributzka, JDevlieghere
Differential Revision: https://reviews.llvm.org/D101835
Also adds support for the ML.exe command-line flag /X, which ignores the INCLUDE environment variable.
This relands commit c43f413b01b021a8f7b6fce013296114fa92a245 using lit's cross-platform `env` support.
Differential Revision: https://reviews.llvm.org/D103989
* For the output, the attributes within the target slice should be
grouped by the input order, then sorted by value ordering.
This is to fix current ubuntu buildbot inconsistences.
This is relanding commit d1d36f7ad2ae82bea8a6fcc40d6c42a72e21f096 .
This patch additionally addresses failures found in buildbots & post review comments.
This patch introduces a new tool, llvm-tapi-diff, that compares and returns the diff of two TBD files.
Reviewed By: ributzka, JDevlieghere
Differential Revision: https://reviews.llvm.org/D101835
This patch adds initial support for using the new pass manager when
doing ThinLTO via libLTO.
Reviewed By: steven_wu
Differential Revision: https://reviews.llvm.org/D102627
