The operator< in the previous attempt was incorrect. It is unfortunate
that this was only caught by the expensive checks.
This reverts commit ff1147c3635685ba6aefbdc9394300adb5404595.
As noted in https://reviews.llvm.org/D93459, the formatting of
multi-line descriptions of clEnumValN and the likes is unfavorable.
Thus this patch adds support for correctly indenting these.
Reviewed By: serge-sans-paille
Differential Revision: https://reviews.llvm.org/D93494
Previously we'd hit UB due to an invalid left shift operand.
Also fix the WASM emitter to properly use SLEB128 encoding instead of
ULEB128 encoding for signed fields so that negative numbers don't
result in overly-large values that we can't read back any more.
In passing, don't diagnose a non-canonical ULEB128 that fits in a uint64_t but
has redundant trailing zero bytes.
Reviewed By: dblaikie, aardappel
Differential Revision: https://reviews.llvm.org/D95510
Previously, operator== would consider the actual equality of the pairs
(lhs.Value, lhs.State) == (rhs.Value, rhs.State). However, if an invalid
cost was involved in a call to operator<, only the state would be
compared. Thus, it was not the case that ({2, Invalid} < {3, Invalid} ||
{2, Invalid} > {3, Invalid} || {2, Invalid} == {3, Invalid}).
This patch implements a true total ordering, where cost state is
considered first, then value. While it's not really imporant that
{2, Invalid} be considered to be less than {3, Invalid}, it's not a
problem either. This patch also implements operator== in terms of
operator<, so the two definitions will be kept in sync.
Reviewed By: sdesmalen
Differential Revision: https://reviews.llvm.org/D95803
Previously file entries in the -ivfsoverlay yaml could map to a file in the
external file system, but directories had to list their contents in the form of
other file entries or directories. Allowing directory entries to map to a
directory in the external file system makes it possible to present an external
directory's contents in a different location and (in combination with the
'fallthrough' option) overlay one directory's contents on top of another.
rdar://problem/72485443
Differential Revision: https://reviews.llvm.org/D94844
Refactor the duplicated canonicalize-path logic in `FileCollector` and
`ModulesDependencyCollector` into a new utility called
`PathCanonicalizer` that's shared. This popped up when tracking down a
bug common to both in https://reviews.llvm.org/D95202.
As drive-bys, update a few names and comments to better reflect the
effect of the code, delay removal of `..`s to avoid an unnecessary extra
string copy, and leave behind a couple of FIXMEs for future
consideration.
Differential Revision: https://reviews.llvm.org/D95279
Don't emit an output dash for an empty sequence. Take emitting a vector
of strings for example:
std::vector<std::string> Strings = {"foo", "bar"};
LLVM_YAML_IS_SEQUENCE_VECTOR(std::string)
yout << Strings;
This emits the following YAML document.
---
- foo
- bar
...
When the vector is empty, this generates the following result:
---
- []
...
Although this is valid YAML, it does not match what we meant to emit.
The result is a one-element sequence consisting of an empty list.
Indeed, if we were to try to read this again we get an error:
YAML:2:4: error: not a mapping
- []
The problem is the output dash before the empty list. The correct output
would be:
---
[]
...
This patch fixes that by not emitting the output dash for an empty
sequence.
Differential revision: https://reviews.llvm.org/D95280
This patch addresses inconsistencies in the way fallthrough is handled
in the RedirectingFileSystem. Rather than trying to change the working
directory of the external filesystem, the RedirectingFileSystem will
canonicalize every path before handing it down. This guarantees that
relative paths are resolved relative to the RedirectingFileSystem's
working directory.
This allows us to have a strictly virtual working directory, and still
fallthrough for absolute paths, but not for relative paths that would
get resolved incorrectly at the lower layer (for example, in case of the
RealFileSystem, because the strictly virtual path does not exist).
Differential revision: https://reviews.llvm.org/D95188
All of these families were claiming to be a73 based, which was causing
-mcpu/mtune=native to never use the newer features available to these
cores.
Goes through each and bumps the individual cores to their respective Big
counterparts. Since this code path doesn't support big.little detection,
there was already a precedent set with the Qualcomm line to choose the
big cores only.
Adds a comment on each line for the product's name that the part number
refers to. Confirmed on-device and through Linux header naming
convections.
Additionally newer SoCs mix CPU implementer parts from multiple
implementers. Both 0x41 (ARM) and 0x51 (Qualcomm) in the Snapdragon case
This was causing a desync in information where the scan at the start to
find the implementer would mismatch the part scan later on.
Now scan for both implementer and part at the start so these stay in
sync.
Differential Revision: https://reviews.llvm.org/D94954
This CPU supports all v8.5a features except BTI, and so identifies as v8.5a to
Clang. A bit weird, but the best way for things like xnu to detect the new
features it cares about.
The number of hardware threads available to a ThreadPool can be limited if setting an affinity mask.
For example:
> start /B /AFFINITY 0xF lld-link.exe ...
Would let LLD only use 4 hyper-threads.
Previously, there was an outstanding issue on Windows Server 2019 on dual-CPU machines, which was preventing from using both CPU sockets. In normal conditions, when no affinity mask was set, ProcessorGroup::AllThreads was different from ProcessorGroup::UsableThreads. The previous code in llvm/lib/Support/Windows/Threading.inc L201 was improperly assuming those two values to be equal, and consequently was limiting the execution to only one CPU socket.
Differential Revision: https://reviews.llvm.org/D92419
The number of hardware threads available to a ThreadPool can be limited if setting an affinity mask.
For example:
> start /B /AFFINITY 0xF lld-link.exe ...
Would let LLD only use 4 hyper-threads.
Previously, there was an outstanding issue on Windows Server 2019 on dual-CPU machines, which was preventing from using both CPU sockets. In normal conditions, when no affinity mask was set, ProcessorGroup::AllThreads was different from ProcessorGroup::UsableThreads. The previous code in llvm/lib/Support/Windows/Threading.inc L201 was improperly assuming those two values to be equal, and consequently was limiting the execution to only one CPU socket.
Differential Revision: https://reviews.llvm.org/D92419
Check if all possible values for a pair of knownbits give the same icmp result - these are based off the checks performed in InstCombineCompares.cpp and D86578.
Add exhaustive unit test coverage - a followup will update InstCombineCompares.cpp to use this.
This patch upstreams support for the Armv8-a Cortex-A78C
processor for AArch64 and ARM.
In detail:
Adding cortex-a78c as cpu option for aarch64 and arm targets in clang
Adding Cortex-A78C CPU name and ProcessorModel in llvm
Details of the CPU can be found here:
https://www.arm.com/products/silicon-ip-cpu/cortex-a/cortex-a78c
Previously you just two hex numbers you had to decode manually.
This change adds a predicate formatter for extension flags
to produce failure messages like:
```
[ RUN ] AArch64CPUTests/AArch64CPUTestFixture.testAArch64CPU/2
<...>llvm/unittests/Support/TargetParserTest.cpp:862:
Failure
Expected extension flags: +fp-armv8, +crc, +crypto (0xe)
Got extension flags: +fp-armv8, +neon, +crc, +crypto (0x1e)
[ FAILED ] AArch64CPUTests/AArch64CPUTestFixture.testAArch64CPU/2,
where GetParam() = "cortex-a34", "armv8-a", <...>
```
From there you can take the feature name and map it back
to the enum in ARM/AArch64TargetParser.def.
(which isn't perfect but you've probably got both files
open if you're editing these tests)
Note that AEK_NONE is not meant to be user facing in the compiler
but here it is part of the tests. So failures may show an
extension "none" where the normal target parser wouldn't.
The formatter is implemented as a template on ARM::ISAKind
because the predicate formatters assume all parameters are used
for comparison.
(e.g. PRED_FORMAT3 is for comparing 3 values, not having 3
arguments in general)
Reviewed By: MarkMurrayARM
Differential Revision: https://reviews.llvm.org/D93448
Also convert the test function to use EXPECT_EQ and
remove the special case for the AEK_NONE extension.
This means that each test is marked as failing separatley
and the accumultated EXPECT failures are printed next
to that test, with its parameters.
Before they would be hidden by the "pass &=" pattern
and failures would print in one block since it was a
"single" test.
Example of the new failure messages:
```
ARMCPUTestsPart1/ARMCPUTestFixture.ARMCPUTests/6
[==========] Running 1 test from 1 test case.
[----------] Global test environment set-up.
[----------] 1 test from ARMCPUTestsPart1/ARMCPUTestFixture
[ RUN ] ARMCPUTestsPart1/ARMCPUTestFixture.ARMCPUTests/6
/work/open_source/nightly-llvm/llvm-project/llvm/unittests/Support/TargetParserTest.cpp:66:
Failure
Expected: params.ExpectedFlags
Which is: 3405705229
To be equal to: default_extensions
Which is: 1
[ FAILED ] ARMCPUTestsPart1/ARMCPUTestFixture.ARMCPUTests/6, where
GetParam() = "arm8", "armv4", "none", 0xcafef00d, "4" (0 ms)
```
Reviewed By: MarkMurrayARM
Differential Revision: https://reviews.llvm.org/D93392
This extends the command-line support for the 'armv8.7-a' architecture
name to the ARM target.
Based on a patch written by Momchil Velikov.
Reviewed By: ostannard
Differential Revision: https://reviews.llvm.org/D93231
This introduces command-line support for the 'armv8.7-a' architecture name
(and an alias without the '-', as usual), and for the 'ls64' extension name.
Based on patches written by Simon Tatham.
Reviewed By: ostannard
Differential Revision: https://reviews.llvm.org/D91776
We were passing this as an argument but never using
it. ARM has always checked this.
Note that the FPU list is shared between ARM and AArch64
so there is no AArch64::getFPUName, just ARM::getFPUName.
Reviewed By: dmgreen
Differential Revision: https://reviews.llvm.org/D93387
We determined that the MSVC implementation of std::aligned* isn't suited
to our needs. It doesn't support 16 byte alignment or higher, and it
doesn't really guarantee 8 byte alignment. See
https://github.com/microsoft/STL/issues/1533
Also reverts "ADT: Change AlignedCharArrayUnion to an alias of std::aligned_union_t, NFC"
Also reverts "ADT: Remove AlignedCharArrayUnion, NFC" to bring back
AlignedCharArrayUnion.
This reverts commit 4d8bf870a82765eb0d4fe53c82f796b957c05954.
This reverts commit d10f9863a5ac1cb681af07719650c44b48f289ce.
This reverts commit 4b5dc150b9862271720b3d56a3e723a55dd81838.
This is the first in a series of patches that attempts to migrate
existing cost instructions to return a new InstructionCost class
in place of a simple integer. This new class is intended to be
as light-weight and simple as possible, with a full range of
arithmetic and comparison operators that largely mirror the same
sets of operations on basic types, such as integers. The main
advantage to using an InstructionCost is that it can encode a
particular cost state in addition to a value. The initial
implementation only has two states - Normal and Invalid - but these
could be expanded over time if necessary. An invalid state can
be used to represent an unknown cost or an instruction that is
prohibitively expensive.
This patch adds the new class and changes the getInstructionCost
interface to return the new class. Other cost functions, such as
getUserCost, etc., will be migrated in future patches as I believe
this to be less disruptive. One benefit of this new class is that
it provides a way to unify many of the magic costs in the codebase
where the cost is set to a deliberately high number to prevent
optimisations taking place, e.g. vectorization. It also provides
a route to represent the extremely high, and unknown, cost of
scalarization of scalable vectors, which is not currently supported.
Differential Revision: https://reviews.llvm.org/D91174
Remove target features crypto for Cortex-R82, because it doesn't have any, and
add LSE which was missing while we are at it.
This also removes crypto from the v8-R architecture description because that
aligns better with GCC and so far none of the R-cores have implemented crypto,
so is probably a more sensible default.
Differential Revision: https://reviews.llvm.org/D91994
Add an overload of `RedirectingFileSystem::create` that builds a
redirecting filesystem off of a simple vector of string pairs. This is
intended to be used to support `clang::arcmt::FileRemapper` and
`clang::PreprocessorOptions::RemappedFiles`.
Differential Revision: https://reviews.llvm.org/D91317
Uniformly return uniquely-owned filesystems from VFS creation APIs. The
one exception is `getRealFileSystem`, which has a single instance and
needs to be shared.
This is almost NFC, except that it fixes a memory leak in
`vfs::collectVFSFromYAML()`.
Depends on https://reviews.llvm.org/D92888
Differential Revision: https://reviews.llvm.org/D92890
Prep commit already migrated users over to std::aligned_union_t; this
just deletes the type / header / test.
Differential Revision: https://reviews.llvm.org/D92517
Use a fast path for column width computation for ascii characters. Especially
relevant for llvm-objdump.
before:
% time ./bin/llvm-objdump -D -j .text /lib/libc.so.6 >/dev/null
./bin/llvm-objdump -D -j .text /lib/libc.so.6 > /dev/null 0.75s user 0.01s system 99% cpu 0.757 total
after:
% time ./bin/llvm-objdump -D -j .text /lib/libc.so.6 >/dev/null
./bin/llvm-objdump -D -j .text /lib/libc.so.6 > /dev/null 0.37s user 0.01s system 99% cpu 0.378 total
Differential Revision: https://reviews.llvm.org/D92180
Revert "Delete llvm::is_trivially_copyable and CMake variable HAVE_STD_IS_TRIVIALLY_COPYABLE"
This reverts commit 4d4bd40b578d77b8c5bc349ded405fb58c333c78.
This reverts commit 557b00e0afb2dc1776f50948094ca8cc62d97be4.
I took the "Permitted"/"Not Permitted" combo from the `Tag_ARM_ISA_use` case (GNU tools print "Yes").
Reviewed By: compnerd, MaskRay, simon_tatham
Differential Revision: https://reviews.llvm.org/D90305
In some places the parser guards against dereferencing `End`, while in
others it relies on the presence of a trailing `'\0'` to elide checks.
Add the remaining guards needed to ensure the parser never attempts to
dereference `End`, making it safe to not require a null-terminated input
buffer.
Update the parser fuzzer harness so that it tests with buffers that are
guaranteed to be non-null-terminated, null-terminated, and 1-terminated,
additionally ensuring the result of the parse is the same in each case.
Some of the regression tests were written by inspection, and some are
cases caught by the fuzzer which required additional fixes in the
parser.
Differential Revision: https://reviews.llvm.org/D84050
The `Range` of an alias/anchor token includes the leading `&` or `*`,
but it is skipped while parsing the name. The check for an empty name
fails to account for the skipped leading character and so the error is
never hit.
Fix the off-by-one and add a couple regression tests.
Reviewed By: dexonsmith
Differential Revision: https://reviews.llvm.org/D91462
