Reduced version of D26357 - based on the discussion on llvm-dev about canonicalization of UMIN/UMAX/SMIN/SMAX as well as ABS I've reduced that patch to just the ABS ISD node (with x86/sse support) to improve basic combines and lowering.
ARM/AArch64, Hexagon, PowerPC and NVPTX all have similar instructions allowing us to make this a generic opcode and move away from the hard coded tablegen patterns which makes it tricky to match more complex patterns.
At the moment this patch doesn't attempt legalization as we only create an ABS node if its legal/custom.
Differential Revision: https://reviews.llvm.org/D29639
llvm-svn: 297780
rL230225 made the assumption that only the lower 32-bits of an MMX register load is used as a shift value, when in fact the whole 64-bits are reloaded and treated as a i64 to determine the shift value.
This patch reverts rL230225 to ensure that the whole 64-bits of memory are folded and ensures that the upper 32-bit are zero'd for cases where the shift value has come from a scalar source.
Found during fuzz testing.
Differential Revision: https://reviews.llvm.org/D30833
llvm-svn: 297667
This patch introduces new X86ISD::FMAXS and X86ISD::FMINS opcodes. The legacy intrinsics now lower to this node. As do the AVX-512 masked intrinsics when the rounding mode is CUR_DIRECTION.
I've merged a copy of the tablegen multiclass avx512_fp_scalar into avx512_fp_scalar_sae. avx512_fp_scalar still needs to support CUR_DIRECTION appearing as a rounding mode for X86ISD::FADD_ROUND and others.
Differential revision: https://reviews.llvm.org/D30186
llvm-svn: 295810
Its more profitable to go through memory (1 cycles throughput)
than using VMOVD + VPERMV/PSHUFB sequence ( 2/3 cycles throughput) to implement EXTRACT_VECTOR_ELT with variable index.
IACA tool was used to get performace estimation (https://software.intel.com/en-us/articles/intel-architecture-code-analyzer)
For example for var_shuffle_v16i8_v16i8_xxxxxxxxxxxxxxxx_i8 test from vector-shuffle-variable-128.ll I get 26 cycles vs 79 cycles.
Removing the VINSERT node, we don't need it any more.
Differential Revision: https://reviews.llvm.org/D29690
llvm-svn: 295660
This requires some instructions to be renamed to move the Y earlier in the instruction name. The new names are more consistent with other instructions.
llvm-svn: 295579
I added API for creation a target specific memory node in DAG. Today, all memory nodes are common for all targets and their constructors are located in SelectionDAG.cpp.
There are some cases in X86 where we need to create a special node - truncation-with-saturation store, float-to-half-store.
In the current patch I added truncation-with-saturation nodes and I'm using them for intrinsics. In the future I plan to implement DAG lowering for truncation-with-saturation pattern.
Differential Revision: https://reviews.llvm.org/D27899
llvm-svn: 290250
Summary:
Scalar intrinsics have specific semantics about the which input's upper bits are passed through to the output. The same input is also supposed to be the input we use for the lower element when the mask bit is 0 in a masked operation. We aren't currently keeping these semantics with instruction selection.
This patch corrects this by introducing new scalar FMA ISD nodes that indicate whether operand 1(one of the multiply inputs) or operand 3(the additon/subtraction input) should pass thru its upper bits.
We use this information to select 213/132 form for the operand 1 version and the 231 form for the operand 3 version.
We also use this information to suppress combining FNEG operations on the passthru input since semantically the passthru bits aren't negated. This is stronger than the earlier check added for a user being SELECTS so we can remove that.
This fixes PR30913.
Reviewers: delena, zvi, v_klochkov
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D27144
llvm-svn: 289190
Summary:
This patch removes the scalar logical operation alias instructions. We can just use reg class copies and use the normal packed instructions instead. This removes the need for putting these instructions in the execution domain fixing tables as was done recently.
I removed the loadf64_128 and loadf32_128 patterns as DAG combine creates a narrower load for (extractelt (loadv4f32)) before we ever get to isel.
I plan to add similar patterns for AVX512DQ in a future commit to allow use of the larger register class when available.
Reviewers: spatel, delena, zvi, RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D27401
llvm-svn: 288771
Replace the CVTTPD2DQ/CVTTPD2UDQ and CVTDQ2PD/CVTUDQ2PD opcodes with general versions.
This is an initial step towards similar FP_TO_SINT/FP_TO_UINT and SINT_TO_FP/UINT_TO_FP lowering to AVX512 CVTTPS2QQ/CVTTPS2UQQ and CVTQQ2PS/CVTUQQ2PS with illegal types.
Differential Revision: https://reviews.llvm.org/D27072
llvm-svn: 287870
This patch adds support for fptoui to 2i32 from both 2f64 and 2f32, building on Simon's change for the signed version in r284459 and using AVX-512 instructions.
If we don't have VLX support we need to use a 512-bit operation for v2f64->v2i32 and extract the result.
It also recognises that cvttpd2udq zeroes the upper 64-bits of the xmm result.
Differential Revision: https://reviews.llvm.org/D26331
llvm-svn: 286345
2 new intrinsics covering AVX-512 compress/expand functionality.
This implementation includes syntax, DAG builder, operation lowering and tests.
Does not include: handling of illegal data types, codegen prepare pass and the cost model.
llvm-svn: 285876
As discussed on PR28461 we currently miss the chance to lower "fptosi <2 x double> %arg to <2 x i32>" to cvttpd2dq due to its use of illegal types.
This patch adds support for fptosi to 2i32 from both 2f64 and 2f32.
It also recognises that cvttpd2dq zeroes the upper 64-bits of the xmm result (similar to D23797) - we still don't do this for the cvttpd2dq/cvttps2dq intrinsics - this can be done in a future patch.
Differential Revision: https://reviews.llvm.org/D23808
llvm-svn: 284459
Masked-expand-load node represents load operation that loads a variable amount of elements from memory according to amount of "true" bits in the mask and expands the loaded elements according to their position in the mask vector.
Right now, the node is used in intrinsics for VEXPAND* instructions.
The work is done towards implementation of masked.expandload and masked.compressstore intrinsics.
Differential Revision: https://reviews.llvm.org/D25322
llvm-svn: 283694
This revealed that scalar intrinsics could create nodes with a rounding mode of FROUND_CUR_DIRECTION, but the patterns didn't check for it. It just worked because isel doesn't check operand count and we had a pattern without the rounding mode argument at all.
llvm-svn: 282231
It turns out isel is really not robust against having different type profiles for the same opcode. It turns out that if you put an illegal rounding mode(i.e. not CUR_DIRECTION or NO_EXC) on a comiss intrinsic we would generate the FSETCC form with the rounding mode added, but then pattern match to an instruction with ROUND_CUR_DIRECTION.
We can probably get away with just one FSETCCM opcode that always contains the rounding mode and explicitly put ROUND_CUR_DIRECTION in the pattern, but I'll leave that for future work.
With this change the clang tests for the comiss intrinsics that used an incorrect rounding mode of 3 properly fail isel instead of silently doing the wrong thing. Those clang tests will be fixed in a follow up commit and I also plan to add rounding mode checking to clang.
llvm-svn: 282055
There was no way to control its value so it was always FROUND_CURRENT making it unnecessary. The true rounding mode is encoded in the immediate operand of the instruction.
This also removes the pattern from the rb form of the instructions since there is no way to specify the FROUND_NO_EXC rounding mode it required.
llvm-svn: 282052
Optimized (truncate (assertzext x) to i1) and anyext i1 to i8/16/32.
Optimization of this patterns is a one more step towards i1 optimization on AVX-512.
Differential Revision: https://reviews.llvm.org/D24456
llvm-svn: 281302
We need to bitcast the index operand to a floating point type so that it matches the result type. If not then the passthru part of the DAG will be a bitcast from the index's original type to the destination type. This makes it very difficult to match. The other option would be to add 5 sets of patterns for every other possible type.
llvm-svn: 280696
The only way to select them was in AVX512 mode because EVEX VMOVSS/SD was below them and the patterns weren't qualified properly for AVX only. So if you happened to have an aligned FR32/FR64 load in AVX512 you could get a VEX encoded VMOVAPS/VMOVAPD.
I tried to search back through history and it seems like these instructions were probably unselectable for at least 5 years, at least to the time the VEX versions were added. But I can't prove they ever were.
llvm-svn: 280644
This patch is intended to solve:
https://llvm.org/bugs/show_bug.cgi?id=28044
By changing the definition of X86ISD::CMPP to use float types, we allow it to be created
and pass legalization for an SSE1-only target where v4i32 is not legal.
The motivational trail for this change includes:
https://llvm.org/bugs/show_bug.cgi?id=28001
and eventually makes this trigger:
http://reviews.llvm.org/D21190
Ie, after this step, we should be free to have Clang generate FP compare IR instead of x86
intrinsics for SSE C packed compare intrinsics. (We can auto-upgrade and remove the LLVM
sse.cmp intrinsics as a follow-up step.) Once we're generating vector IR instead of x86
intrinsics, a big pile of generic optimizations can trigger.
Differential Revision: http://reviews.llvm.org/D21235
llvm-svn: 272511
This patch begins adding support for lowering to the XOP VPERMIL2PD/VPERMIL2PS shuffle instructions - adding the X86ISD::VPERMIL2 opcode and cleaning up the usage.
The internal llvm intrinsics were assuming the shuffle mask operand was the same type as the float/double input operands (I guess to simplify the intrinsic definitions in X86InstrXOP.td to a single value type). These needed changing to integer types (matching the clang builtin and the AMD intrinsics definitions), an auto upgrade path is added to convert old calls.
Mask decoding/target shuffle support will be added in future patches.
Differential Revision: http://reviews.llvm.org/D20049
llvm-svn: 271633
We've been pretending that segments are i8imm since the initial
support (r68645), predating the addition of the SEGMENT_REG class
(r81895). That happens to works, but is wrong, and inconsistent
with how we print (e.g., X86ATTInstPrinter::printMemReference)
and parse them (e.g., X86Operand::addMemOperands).
This change shouldn't affect any tool users, but is visible to
library users or out-of-tree tablegen backends: this causes
MCOperandInfo for the segment op to have an RC instead of "unknown",
and TII::getRegClass to actually return something. As the registers
are reserved and no vregs of the class ever created, that shouldn't
change anything.
No test change; no suspicious getRegClass() in X86 and CodeGen.
llvm-svn: 271559
