leaq foo@TLSGD(%rip), %rdi
as part of the instruction sequence. Using a register other than %rdi and then
copying it to %rdi is not valid.
llvm-svn: 69350
with SUBREG_TO_REG, teach SimpleRegisterCoalescing to coalesce
SUBREG_TO_REG instructions (which are similar to INSERT_SUBREG
instructions), and teach the DAGCombiner to take advantage of this on
targets which support it. This eliminates many redundant
zero-extension operations on x86-64.
This adds a new TargetLowering hook, isZExtFree. It's similar to
isTruncateFree, except it only applies to actual definitions, and not
no-op truncates which may not zero the high bits.
Also, this adds a new optimization to SimplifyDemandedBits: transform
operations like x+y into (zext (add (trunc x), (trunc y))) on targets
where all the casts are no-ops. In contexts where the high part of the
add is explicitly masked off, this allows the mask operation to be
eliminated. Fix the DAGCombiner to avoid undoing these transformations
to eliminate casts on targets where the casts are no-ops.
Also, this adds a new two-address lowering heuristic. Since
two-address lowering runs before coalescing, it helps to be able to
look through copies when deciding whether commuting and/or
three-address conversion are profitable.
Also, fix a bug in LiveInterval::MergeInClobberRanges. It didn't handle
the case that a clobber range extended both before and beyond an
existing live range. In that case, multiple live ranges need to be
added. This was exposed by the new subreg coalescing code.
Remove 2008-05-06-SpillerBug.ll. It was bugpoint-reduced, and the
spiller behavior it was looking for no longer occurrs with the new
instruction selection.
llvm-svn: 68576
builds.
--- Reverse-merging (from foreign repository) r68552 into '.':
U test/CodeGen/X86/tls8.ll
U test/CodeGen/X86/tls10.ll
U test/CodeGen/X86/tls2.ll
U test/CodeGen/X86/tls6.ll
U lib/Target/X86/X86Instr64bit.td
U lib/Target/X86/X86InstrSSE.td
U lib/Target/X86/X86InstrInfo.td
U lib/Target/X86/X86RegisterInfo.cpp
U lib/Target/X86/X86ISelLowering.cpp
U lib/Target/X86/X86CodeEmitter.cpp
U lib/Target/X86/X86FastISel.cpp
U lib/Target/X86/X86InstrInfo.h
U lib/Target/X86/X86ISelDAGToDAG.cpp
U lib/Target/X86/AsmPrinter/X86ATTAsmPrinter.cpp
U lib/Target/X86/AsmPrinter/X86IntelAsmPrinter.cpp
U lib/Target/X86/AsmPrinter/X86ATTAsmPrinter.h
U lib/Target/X86/AsmPrinter/X86IntelAsmPrinter.h
U lib/Target/X86/X86ISelLowering.h
U lib/Target/X86/X86InstrInfo.cpp
U lib/Target/X86/X86InstrBuilder.h
U lib/Target/X86/X86RegisterInfo.td
llvm-svn: 68560
This introduces a small regression on the generated code
quality in the case we are just computing addresses, not
loading values.
Will work on it and on X86-64 support.
llvm-svn: 68552
x * 40
=>
shlq $3, %rdi
leaq (%rdi,%rdi,4), %rax
This has the added benefit of allowing more multiply to be folded into addressing mode. e.g.
a * 24 + b
=>
leaq (%rdi,%rdi,2), %rax
leaq (%rsi,%rax,8), %rax
llvm-svn: 67917
%a = ...
%b = and i32 %a, 2
%c = srl i32 %b, 1
%d = br i32 %c,
into
%a = ...
%b = and %a, 2
%c = X86ISD::CMP %b, 0
%d = X86ISD::BRCOND %c ...
This applies only when the AND constant value has one bit set and the SRL
constant is equal to the log2 of the AND constant. The back-end is smart enough
to convert the result into a TEST/JMP sequence.
llvm-svn: 67728
1. ConstantPoolSDNode alignment field is log2 value of the alignment requirement. This is not consistent with other SDNode variants.
2. MachineConstantPool alignment field is also a log2 value.
3. However, some places are creating ConstantPoolSDNode with alignment value rather than log2 values. This creates entries with artificially large alignments, e.g. 256 for SSE vector values.
4. Constant pool entry offsets are computed when they are created. However, asm printer group them by sections. That means the offsets are no longer valid. However, asm printer uses them to determine size of padding between entries.
5. Asm printer uses expensive data structure multimap to track constant pool entries by sections.
6. Asm printer iterate over SmallPtrSet when it's emitting constant pool entries. This is non-deterministic.
Solutions:
1. ConstantPoolSDNode alignment field is changed to keep non-log2 value.
2. MachineConstantPool alignment field is also changed to keep non-log2 value.
3. Functions that create ConstantPool nodes are passing in non-log2 alignments.
4. MachineConstantPoolEntry no longer keeps an offset field. It's replaced with an alignment field. Offsets are not computed when constant pool entries are created. They are computed on the fly in asm printer and JIT.
5. Asm printer uses cheaper data structure to group constant pool entries.
6. Asm printer compute entry offsets after grouping is done.
7. Change JIT code to compute entry offsets on the fly.
llvm-svn: 66875
for i32/i64 expressions (we could also do i16 on cpus where
i16 lea is fast, but I didn't add this). On the example, we now
generate:
_test:
movl 4(%esp), %eax
cmpl $42, (%eax)
setl %al
movzbl %al, %eax
leal 4(%eax,%eax,8), %eax
ret
instead of:
_test:
movl 4(%esp), %eax
cmpl $41, (%eax)
movl $4, %ecx
movl $13, %eax
cmovg %ecx, %eax
ret
llvm-svn: 66869
related transformations out of target-specific dag combine into the
ARM backend. These were added by Evan in r37685 with no testcases
and only seems to help ARM (e.g. test/CodeGen/ARM/select_xform.ll).
Add some simple X86-specific (for now) DAG combines that turn things
like cond ? 8 : 0 -> (zext(cond) << 3). This happens frequently
with the recently added cp constant select optimization, but is a
very general xform. For example, we now compile the second example
in const-select.ll to:
_test:
movsd LCPI2_0, %xmm0
ucomisd 8(%esp), %xmm0
seta %al
movzbl %al, %eax
movl 4(%esp), %ecx
movsbl (%ecx,%eax,4), %eax
ret
instead of:
_test:
movl 4(%esp), %eax
leal 4(%eax), %ecx
movsd LCPI2_0, %xmm0
ucomisd 8(%esp), %xmm0
cmovbe %eax, %ecx
movsbl (%ecx), %eax
ret
This passes multisource and dejagnu.
llvm-svn: 66779
the same say the "test" instruction does in overflow cases,
so eliminating the test is only safe when those bits aren't
needed, as is the case for COND_E and COND_NE, or if it
can be proven that no overflow will occur. For now, just
restrict the optimization to COND_E and COND_NE and don't
do any overflow analysis.
llvm-svn: 66318
instruction. The class also consolidates the code for detecting constant
splats that's shared across PowerPC and the CellSPU backends (and might be
useful for other backends.) Also introduces SelectionDAG::getBUID_VECTOR() for
generating new BUILD_VECTOR nodes.
llvm-svn: 65296
(Note: Eventually, commits like this will be handled via a pre-commit hook that
does this automagically, as well as expand tabs to spaces and look for 80-col
violations.)
llvm-svn: 64827
in inline asm as signed (what gcc does). Add partial support
for x86-specific "e" and "Z" constraints, with appropriate
signedness for printing.
llvm-svn: 64400
Many targets build placeholder nodes for special operands, e.g.
GlobalBaseReg on X86 and PPC for the PIC base. There's no
sensible way to associate debug info with these. I've left
them built with getNode calls with explicit DebugLoc::getUnknownLoc operands.
I'm not too happy about this but don't see a good improvement;
I considered adding a getPseudoOperand or something, but it
seems to me that'll just make it harder to read.
llvm-svn: 63992
crashes or wrong code with codegen of large integers:
eliminate the legacy getIntegerVTBitMask and
getIntegerVTSignBit methods, which returned their
value as a uint64_t, so couldn't handle huge types.
llvm-svn: 63494
dagcombines that help it match in several more cases. Add
several more cases to test/CodeGen/X86/bt.ll. This doesn't
yet include matching for BT with an immediate operand, it
just covers more register+register cases.
llvm-svn: 63266
tidy up SDUse and related code.
- Replace the operator= member functions with a set method, like
LLVM Use has, and variants setInitial and setNode, which take
care up updating use lists, like LLVM Use's does. This simplifies
code that calls these functions.
- getSDValue() is renamed to get(), as in LLVM Use, though most
places can either use the implicit conversion to SDValue or the
convenience functions instead.
- Fix some more node vs. value terminology issues.
Also, eliminate the one remaining use of SDOperandPtr, and
SDOperandPtr itself.
llvm-svn: 62995
X86. This code:
void f() {
uint32_t x;
float y = (float)x;
}
used to be:
movl %eax, -8(%ebp)
movl [2^52 double], -4(%ebp)
movsd -8(%ebp), %xmm0
subsd [2^52 double], %xmm0
cvtsd2ss %xmm0, %xmm0
Is now:
movsd [2^52 double], %xmm0
movsd %xmm0, %xmm1
movd %ecx, %xmm2
orps %xmm2, %xmm1
subsd %xmm0, %xmm1
cvtsd2ss %xmm1, %xmm0
This is faster on X86. Note that there's an extra load of %xmm0 into %xmm1. That
will be fixed in a later coalescer fix.
llvm-svn: 62404
promote from i1 all the way up to the canonical SetCC type.
In order to discover an appropriate type to use, pass
MVT::Other to getSetCCResultType. In order to be able to
do this, change getSetCCResultType to take a type as an
argument, not a value (this is also more logical).
llvm-svn: 61542
This removes all the _8, _16, _32, and _64 opcodes and replaces each
group with an unsuffixed opcode. The MemoryVT field of the AtomicSDNode
is now used to carry the size information. In tablegen, the size-specific
opcodes are replaced by size-independent opcodes that utilize the
ability to compose them with predicates.
This shrinks the per-opcode tables and makes the code that handles
atomics much more concise.
llvm-svn: 61389
which are identical to the original patterns.
- Change the multiply with overflow so that we distinguish between signed and
unsigned multiplication. Currently, unsigned multiplication with overflow
isn't working!
llvm-svn: 60963
ISD::ADD to emit an implicit EFLAGS. This was horribly broken. Instead, replace
the intrinsic with an ISD::SADDO node. Then custom lower that into an
X86ISD::ADD node with a associated SETCC that checks the correct condition code
(overflow or carry). Then that gets lowered into the correct X86::ADDOvf
instruction.
Similar for SUB and MUL instructions.
llvm-svn: 60915
loops when they can be subsumed into addressing modes.
Change X86 addressing mode check to realize that
some PIC references need an extra register.
(I believe this is correct for Linux, if not, I'm sure
someone will tell me.)
llvm-svn: 60608
- LowerXADDO lowers [SU]ADDO into an ADD with an implicit EFLAGS define. The
EFLAGS are fed into a SETCC node which has the conditional COND_O or COND_C,
depending on the type of ADDO requested.
- LowerBRCOND now recognizes if it's coming from a SETCC node with COND_O or
COND_C set.
llvm-svn: 60388
ReplaceNodeResults: rather than returning a node which
must have the same number of results as the original
node (which means mucking around with MERGE_VALUES,
and which is also easy to get wrong since SelectionDAG
folding may mean you don't get the node you expect),
return the results in a vector.
llvm-svn: 60348
the conditional for the BRCOND statement. For instance, it will generate:
addl %eax, %ecx
jo LOF
instead of
addl %eax, %ecx
; About 10 instructions to compare the signs of LHS, RHS, and sum.
jl LOF
llvm-svn: 60123
a memset using 16-byte XMM stores, but where the stack realignment code
didn't work. Until it does (PR2962) disable use of xmm regs in memcpy
and memset formation for linux and other targets with insufficiently
aligned stacks.
This is part of PR2888
llvm-svn: 58317
LHS is a foldable load, then LHS and RHS are swapped
and SetCCOpcode is changed to SETUGT. But the later
code is expecting operands to be the wrong way round
for SETUGT, but they are not in this case, resulting
in an inverted compare. The solution is to move the
load normalization before the correction for SETUGT.
This bug was tickled by LegalizeTypes which happened
to legalize the testcase slightly differently to
LegalizeDAG.
llvm-svn: 58092
assume that i64 has been turned into a BUILD_PAIR
node (when called from LegalizeTypes this hasn't
happened yet) and don't use a vector shuffle mask
with an illegal element type.
llvm-svn: 57972
The same one Apple gcc uses, faster. Also gets the
extreme case in gcc.c-torture/execute/ieee/rbug.c
correct which we weren't before; this is not
sufficient to get the test to pass though, there
is another bug.
llvm-svn: 57926
in the 32-bit signed offset field of addresses. Even though this
may be intended, some linkers refuse to relocate code where the
relocated address computation overflows.
Also, fix the sign-extension of constant offsets to use the
actual pointer size, rather than the size of the GlobalAddress
node, which may be different, for example on x86-64 where MVT::i32
is used when the address is being fit into the 32-bit displacement
field.
llvm-svn: 57885
Where previously LLVM might emit code like this:
ucomisd %xmm1, %xmm0
setne %al
setp %cl
orb %al, %cl
jne .LBB4_2
it now emits this:
ucomisd %xmm1, %xmm0
jne .LBB4_2
jp .LBB4_2
It has fewer instructions and uses fewer registers, but it does
have more branches. And in the case that this code is followed by
a non-fallthrough edge, it may be followed by a jmp instruction,
resulting in three branch instructions in sequence. Some effort
is made to avoid this situation.
To achieve this, X86ISelLowering.cpp now recognizes FCMP_OEQ and
FCMP_UNE in lowered form, and replace them with code that emits
two branches, except in the case where it would require converting
a fall-through edge to an explicit branch.
Also, X86InstrInfo.cpp's branch analysis and transform code now
knows now to handle blocks with multiple conditional branches. It
uses loops instead of having fixed checks for up to two
instructions. It can now analyze and transform code generated
from FCMP_OEQ and FCMP_UNE.
llvm-svn: 57873
LowerOperation if it doesn't know what else to do.
This methods should probably be factorized some,
but this is good enough for the moment. Have
LowerATOMIC_BINARY_64 use EXTRACT_ELEMENT rather
than assuming the operand is a BUILD_PAIR (if it
is then getNode will automagically simplify the
EXTRACT_ELEMENT). This way LowerATOMIC_BINARY_64
usable from LegalizeTypes.
llvm-svn: 57831
and add a TargetLowering hook for it to use to determine when this
is legal (i.e. not in PIC mode, etc.)
This allows instruction selection to emit folded constant offsets
in more cases, such as the included testcase, eliminating the need
for explicit arithmetic instructions.
This eliminates the need for the C++ code in X86ISelDAGToDAG.cpp
that attempted to achieve the same effect, but wasn't as effective.
Also, fix handling of offsets in GlobalAddressSDNodes in several
places, including changing GlobalAddressSDNode's offset from
int to int64_t.
The Mips, Alpha, Sparc, and CellSPU targets appear to be
unaware of GlobalAddress offsets currently, so set the hook to
false on those targets.
llvm-svn: 57748
in 32-bit mode instead of assigning a register pair. This has nothing to
do with PR2356, but I happened to notice it while working on it.
llvm-svn: 57704
i.e. conditions that cannot be checked with a single instruction. For example,
SETONE and SETUEQ on x86.
- Teach legalizer to implement *illegal* setcc as a and / or of a number of
legal setcc nodes. For now, only implement FP conditions. e.g. SETONE is
implemented as SETO & SETNE, SETUEQ is SETUO | SETEQ.
- Move x86 target over.
llvm-svn: 57542
- Move the EH landing-pad code and adjust it so that it works
with FastISel as well as with SDISel.
- Add FastISel support for @llvm.eh.exception and
@llvm.eh.selector.
llvm-svn: 57539
`-fno-builtin' flag. Currently, it's used to replace "memset" with "_bzero"
instead of "__bzero" on Darwin10+. This arguably violates the meaning of this
flag, but is currently sufficient. The meaning of this flag should become more
specific over time.
llvm-svn: 56885
