This further improves compatibility with GNU as, allowing input such as the
following to be assembled:
.equ CONST, 0x123456
li a0, CONST
addi a0, a0, %lo(CONST)
.equ CONST, 1
slli a0, a0, CONST
Note that we don't have perfect compatibility with gas, as it will avoid
emitting a relocation in this case:
addi a0, a0, %lo(CONST2)
.equ CONST2, 0x123456
Thanks to Shiva Chen for suggesting a better way to approach this during review.
Differential Revision: https://reviews.llvm.org/D52298
llvm-svn: 350831
When we use the partial-matching function on a 128-bit chunk, we must
account for the possibility that we've matched undef halves of the
original source vectors, so the outputs may need to be reset.
This should allow closing PR40243:
https://bugs.llvm.org/show_bug.cgi?id=40243
llvm-svn: 350830
This is a partial fix for:
https://bugs.llvm.org/show_bug.cgi?id=40243
...as seen in the integer test, we still need to correct the result when using the
existing (old) horizontal op matching function because it does not model the way
x86 256-bit horizontal ops return results (each 128-bit half is its own horizontal-op).
A potential follow-up change for that is discussed in the bug report - see also D56490.
This generally duplicates a lot of the existing matching code, but we can't just remove
that without introducing regressions, so the existing code is renamed and used less often.
Follow-ups may try to reduce that overlap.
Differential Revision: https://reviews.llvm.org/D56450
llvm-svn: 350826
Summary:
This patch changes the legalization action for some half-precision floating-
point vector intrinsics (FSIN, FLOG, etc.) from Promote to Expand. These ops
are not supported in hardware for half-precision vectors, but promotion is
not always possible (for v8f16 operands). Changing the action to Expand fixes
an assertion failure in the legalizer when the frontend produces such ops.
In addition, a quick microbenchmark shows that, in the v4f16 case,
expanding introduces fewer spills and is therefore slightly faster than
promoting.
Reviewers: t.p.northover, SjoerdMeijer
Reviewed By: SjoerdMeijer
Subscribers: javed.absar, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D56296
llvm-svn: 350825
This is https://bugs.llvm.org/show_bug.cgi?id=37151,
GNU objdump spec says that "Normally the disassembly output will skip blocks of zeroes.",
but currently, llvm-objdump prints them.
The patch implements the -z/--disassemble-zeroes option and switches the default to always
skip blocks of zeroes.
Differential revision: https://reviews.llvm.org/D56083
llvm-svn: 350823
See https://bugs.llvm.org/show_bug.cgi?id=40070.
GNU addr2line accepts input addresses both on the command-line and via
stdin. llvm-symbolizer previously only supported the latter. This
change adds support for the former. As with addr2line, the new
behaviour is to only look for addresses on stdin if no positional
arguments were provided to llvm-symbolizer.
Reviewed by: ruiu
Differential Revision: https://reviews.llvm.org/D56272
llvm-svn: 350821
Field ResourceUnitMask was incorrectly defined as a 'const unsigned' mask. It
should have been a 64 bit quantity instead. That means, ResourceUnitMask was
always implicitly truncated to a 32 bit quantity.
This issue has been found by inspection. Surprisingly, that bug was latent, and
it never negatively affected any existing upstream targets.
This patch fixes the wrong definition of ResourceUnitMask, and adds a bunch of
extra debug prints to help debugging potential issues related to invalid
processor resource masks.
llvm-svn: 350820
Allow to specify loop-unrolling with optional parameters explicitly
spelled out in -passes pipeline specification.
Introducing somewhat generic way of specifying parameters parsing via
FUNCTION_PASS_PARAMETRIZED pass registration.
Syntax of parametrized unroll pass name is as follows:
'unroll<' parameter-list '>'
Where parameter-list is ';'-separate list of parameter names and optlevel
optlevel: 'O[0-3]'
parameter: { 'partial' | 'peeling' | 'runtime' | 'upperbound' }
negated: 'no-' parameter
Example:
-passes=loop(unroll<O3;runtime;no-upperbound>)
this invokes LoopUnrollPass configured with OptLevel=3,
Runtime, no UpperBound, everything else by default.
llvm-svn: 350808
Add t2TEQrr to the map of instructions with can be reduced down into
a T1 instruction. This is a special case because TEQ just sets the
CPSR and doesn't write to a GPR, which is not the case for EOR. So,
we need to ensure that the EOR can write to the first operand.
Differential Revision: https://reviews.llvm.org/D56255
llvm-svn: 350801
Summary:
This pass replaces GR8/GR16/GR32/GR64 with their equivalent sized mask register classes. But VK32/VK64 aren't legal without AVX512BW. Apparently this mostly appears to work if the register coalescer is able to remove the VK32/VK64 register class reference. Or if we don't ever spill it. But there's no guarantee of that.
Another Intel employee managed to trigger a crash due to this with ISPC. Unfortunately, I've lost the test case he sent me at the time. I'm trying to get him to reproduce it for me. I'd like to get this in before 8.0 branches since its a little scary.
The regressions here are unfortunate, but I think we can make some improvements to DAG combine, load folding, etc. to fix them. Just not sure if we can get that done for 8.0.
Fixes PR39741
Reviewers: RKSimon, spatel
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D56460
llvm-svn: 350800
Summary:
D55896 and D56029 add support to emit fixups for :abs_g0: , :abs_g1_s: , etc.
This patch adds the necessary enums and MCExpr needed for lowering these.
Reviewers: rnk, mstorsjo, efriedma
Reviewed By: efriedma
Subscribers: javed.absar, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D56037
llvm-svn: 350798
This is a second attempt at r350778, which was reverted in
r350789. The only change is that the unimplemented-simd128 feature has
been renamed simd128-unimplemented, since naming it
unimplemented-simd128 somehow made the simd128 feature flag enable the
unimplemented-simd128 feature on Windows.
llvm-svn: 350791
Summary:
If we don't reset the optimized value O for access A, even though A is no longer optimized to O, A will still show up in that O's users list.
This fails verification when hoisting a Def outside a loop, even though the updates are correct.
The reason is that the phi in the loop header still find as user the hoisted def, because the Def has a pointer to the Phi in its optimized operand.
Reviewers: george.burgess.iv
Subscribers: sanjoy, jlebar, Prazek, llvm-commits
Differential Revision: https://reviews.llvm.org/D56467
llvm-svn: 350783
Found while trying to figure out why my second version of D56421 worked better than the first version. We weren't deleting the vselect in a timely fashion and that caused SimplfyDemandedBit to see an additional user.
The new version doesn't have this problem so this fix isn't needed there, but seemed like the right thing to do.
llvm-svn: 350781
Summary:
This replaces the old ad-hoc -wasm-enable-unimplemented-simd
flag. Also makes the new unimplemented-simd128 feature imply the
simd128 feature.
Reviewers: aheejin, dschuff
Subscribers: sbc100, jgravelle-google, sunfish, llvm-commits, alexcrichton
Differential Revision: https://reviews.llvm.org/D56501
llvm-svn: 350778
The C standard says "The memchr function locates the first
occurrence of c (converted to an unsigned char)[...]". The expansion
was missing the conversion to unsigned char.
Fixes https://bugs.llvm.org/show_bug.cgi?id=39041 .
Differential Revision: https://reviews.llvm.org/D55947
llvm-svn: 350775
When a null terminator is required and the file size is a multiple of the system page size, MemoryBuffer will prefer pread() over mmap(), which can result in excessive memory usage.
Patch by Mike Hommey!
Differential Revision: https://reviews.llvm.org/D56475
llvm-svn: 350774
Summary:
Looks like many passes print its pass description as a debug message at
the start of each pass, so added that to (mostly newly added) other
passes as well.
Reviewers: dschuff
Subscribers: jgravelle-google, sbc100, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D56142
llvm-svn: 350771
Summary:
Instead of using two separate callbacks to return the entry count and the
relative block frequency, use a single callback to return callsite
count. This would allow better supporting hybrid mode in the future as
the count of callsite need not always be derived from entry count (as in
sample PGO).
Reviewers: davidxl
Subscribers: mehdi_amini, steven_wu, dexonsmith, dang, llvm-commits
Differential Revision: https://reviews.llvm.org/D56464
llvm-svn: 350755
If the caller's return type does not have a zeroext attribute but the
callee does a tail call zeroext, we won't consider the tail call during
CodeGenPrepare because the attributes don't match.
However, if the result of the tail call has no uses, it makes sense to
drop the sext/zext attributes.
Differential Revision: https://reviews.llvm.org/D56486
llvm-svn: 350753
Summary: All a non-default title for the debugging this debugging aide
Reviewers: twoh, Kader, modocache
Reviewed By: twoh
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D56499
llvm-svn: 350749
Summary:
For some reason the backend assumed that the condition mask would be
the first argument to the LLVM intrinsic, but everywhere else the
condition mask is the third argument.
Reviewers: aheejin
Subscribers: dschuff, sbc100, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D56412
llvm-svn: 350746
On AIX, attempting (without root) to set the sticky bit on a file with
the `chmod` utility will give:
```
chmod: not all requested changes were made to <file>
```
The same occurs when modifying other permission bits on a file with the
sticky bit already set.
It seems that the `chmod` function will report success despite failing
to set the sticky bit.
llvm-svn: 350735
NVPTX format requires that no labels/label arithmetics is used in the
debug info sections. To avoid possible problems with the adding/modifying the debug info functionality, made these tests more strict.
llvm-svn: 350731
This is an initial implementation for Speculative Load Hardening for
AArch64. It builds on top of the recently introduced
AArch64SpeculationHardening pass.
This doesn't implement (yet) some of the optimizations implemented for
the X86SpeculativeLoadHardening pass. I thought introducing the
optimizations incrementally in follow-up patches should make this easier
to review.
Differential Revision: https://reviews.llvm.org/D55929
llvm-svn: 350729
When GNU objdump dumps the input with -d it prints the symbol addresses,
for example:
0000000000000031 <foo>:
31: 00 00 add %al,(%rax)
...
llvm-objdump currently does not do that.
Patch changes the behavior to match the GNU objdump.
That is useful for implementing -z/--disassemble-zeroes (D56083),
it allows omitting first zero bytes and keep the information
about the symbol address in the output.
Differential revision: https://reviews.llvm.org/D56123
llvm-svn: 350726
Fixed issue with identity values and other cases, f32/f16 identity values to be added later. fma/mac instructions is disabled for now.
Test is fully reworked, added comments. Other fixes:
1. dpp move with uses and old reg initializer should be in the same BB.
2. bound_ctrl:0 is only considered when bank_mask and row_mask are fully enabled (0xF). Othervise the old register value is checked for identity.
3. Added add, subrev, and, or instructions to the old folding function.
4. Kill flag is cleared for the src0 (DPP register) as it may be copied into more than one user.
Differential revision: https://reviews.llvm.org/D55444
llvm-svn: 350721
