* Removed wrong code in sys_spu_thread_group_terminate.
* SPU Thread ID is accurate, including 5th thread id "rule".
* Fixed possible use-after-free access of spu_thread::group member.
* RawSPU ID management simplified.
* Ignore more warnings
These are intentional
* Signed/unsigned mismatch when comparing
* Explictly cast values
* Intentionally discard a nodiscard value
* Change ppu_tid to u32
* Do not use POSIX function name on Windows
* Qt: Use horizontalAdvance instead of width
* Change progress variables to u32
* Use Linux timers for sleeps up to 1ms (v3)
The current sleep timer implementation basically offers two variants. Either
wait the specified time exactly with a condition variable (as host) or use a
combination of it with a thread yielding busy loop afterwards (usleep timer).
While the second one is very precise it consumes CPU loops for each wait call
below 50us. Games like Bomberman Ultra spam 30us waits and the emulator hogs
low power CPUs. Switching to host mode reduces CPU consumption but gives a
~50us penalty for each wait call. Thus extending all sleeps by a factor of
more than two.
The following bugfix tries to improve the system timer for Linux by using
Linux native timers for small wait calls below 1ms. This has two effects.
- Host wait setting has much less wait overhead
- usleep wait setting produces lower CPU overhead
-Indentation warnings
-prevent shift overflow
-This was declared extern in all contexts. Remove this for initialization
-Fix main return types. OH CANADA!
-Silence extraneos 'unused expression' warning
-Force use return value (warning)
-Remove tautological compare copy-pasta (char always < 256)
* Implement both RawSPU and threaded SPU page fault recovery
* Guard page_fault_notification_entries access with a mutex
* Add missing lock in sys_ppu_thread_recover_page_fault/get_page_fault_context
* Fix EINVAL check in sys_ppu_thread_recover_page_fault, previously when the event was not found begin() was erased and
CELL_OK was returned.
* Fixed page fault recovery waiting logic:
- Do not rely on a single thread_ctrl notification (unsafe)
- Avoided a race where ::awake(ppu) can be called before ::sleep(ppu) therefore nop-ing out the notification
* Avoid inconsistencies with vm flags on page fault cause detection
* Fix sys_mmapper_enable_page_fault_notification EBUSY check
from RE it's allowed to register the same queue twice (on a different area) but not to enable page fault notifications twice
Utilities/Thread.cpp:1644:2: error: use of undeclared identifier 'pthread_setname_np'; did you mean 'pthread_set_name_np'?
pthread_setname_np(pthread_self(), m_name.substr(0, 15).c_str());
^~~~~~~~~~~~~~~~~~
pthread_set_name_np
/usr/include/pthread_np.h:58:6: note: 'pthread_set_name_np' declared here
void pthread_set_name_np(pthread_t, const char *);
^
* Thread: unbreak on BSDs after dbc9bdfe02
Utilities/Thread.cpp:1920:2: error: unknown type name 'cpu_set_t'; did you mean 'cpusetid_t'?
cpu_set_t cs;
^~~~~~~~~
cpusetid_t
/usr/include/sys/types.h:84:22: note: 'cpusetid_t' declared here
typedef __cpusetid_t cpusetid_t;
^
Utilities/Thread.cpp:1921:2: error: use of undeclared identifier 'CPU_ZERO'
CPU_ZERO(&cs);
^
Utilities/Thread.cpp:1922:2: error: use of undeclared identifier 'CPU_SET'
CPU_SET(core, &cs);
^
Utilities/Thread.cpp:1923:48: error: unknown type name 'cpu_set_t'; did you mean 'cpusetid_t'?
pthread_setaffinity_np(pthread_self(), sizeof(cpu_set_t), &cs);
^~~~~~~~~
cpusetid_t
* JIT: use MAP_32BIT on Linux and FreeBSD
Unless RLIMIT_DATA is low enough FreeBSD by default reserves lower 2Gb
for brk(2) style heap, ignoring mmap(2) address hint requested by RPCS3.
Passing MAP_32BIT fixes the following crash
Assertion failed: ((Type == ELF::R_X86_64_32 && (Value <= UINT32_MAX)) || (Type == ELF::R_X86_64_32S && ((int64_t)Value <= INT32_MAX && (int64_t)Value >= INT32_MIN))), function resolveX86_64Relocation, file /usr/ports/devel/llvm40/work/llvm-4.0.1.src/lib/ExecutionEngine/RuntimeDyld/RuntimeDyldELF.cpp, line 287.
* build: unbreak -DVULKAN_PREBUILT with system glslang on Unix
rpcs3/Emu/RSX/VK/VKCommonDecompiler.cpp:4:10: fatal error: '../../../../Vulkan/glslang/SPIRV/GlslangToSpv.h' file not found
#include "../../../../Vulkan/glslang/SPIRV/GlslangToSpv.h"
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
rpcs3/CMakeFiles/rpcs3.dir/Emu/RSX/VK/VKCommonDecompiler.cpp.o: In function `vk::compile_glsl_to_spv(std::__1::basic_string<char, std::__1::char_traits<char>, std::__1::allocator<char> >&, glsl::program_domain, std::__1::vector<unsigned int, std::__1::allocator<unsigned int> >&)':
rpcs3/Emu/RSX/VK/VKCommonDecompiler.cpp:(.text+0x50e): undefined reference to `glslang::TProgram::TProgram()'
rpcs3/Emu/RSX/VK/VKCommonDecompiler.cpp:(.text+0x51d): undefined reference to `glslang::TShader::TShader(EShLanguage)'
rpcs3/Emu/RSX/VK/VKCommonDecompiler.cpp:(.text+0x542): undefined reference to `glslang::TShader::setStrings(char const* const*, int)'
rpcs3/Emu/RSX/VK/VKCommonDecompiler.cpp:(.text+0x581): undefined reference to `glslang::TShader::parse(TBuiltInResource const*, int, EProfile, bool, bool, EShMessages, glslang::TShader::Includer&)'
rpcs3/Emu/RSX/VK/VKCommonDecompiler.cpp:(.text+0x5d6): undefined reference to `glslang::TProgram::link(EShMessages)'
rpcs3/Emu/RSX/VK/VKCommonDecompiler.cpp:(.text+0x5f1): undefined reference to `glslang::GlslangToSpv(glslang::TIntermediate const&, std::__1::vector<unsigned int, std::__1::allocator<unsigned int> >&, glslang::SpvOptions*)'
rpcs3/Emu/RSX/VK/VKCommonDecompiler.cpp:(.text+0x5ff): undefined reference to `glslang::TShader::getInfoLog()'
rpcs3/Emu/RSX/VK/VKCommonDecompiler.cpp:(.text+0x61a): undefined reference to `glslang::TShader::getInfoDebugLog()'
rpcs3/Emu/RSX/VK/VKCommonDecompiler.cpp:(.text+0x630): undefined reference to `glslang::TShader::~TShader()'
rpcs3/Emu/RSX/VK/VKCommonDecompiler.cpp:(.text+0x63c): undefined reference to `glslang::TProgram::~TProgram()'
rpcs3/Emu/RSX/VK/VKCommonDecompiler.cpp:(.text+0x6d2): undefined reference to `glslang::TShader::~TShader()'
rpcs3/Emu/RSX/VK/VKCommonDecompiler.cpp:(.text+0x6de): undefined reference to `glslang::TProgram::~TProgram()'
rpcs3/CMakeFiles/rpcs3.dir/Emu/RSX/VK/VKCommonDecompiler.cpp.o: In function `vk::initialize_compiler_context()':
rpcs3/Emu/RSX/VK/VKCommonDecompiler.cpp:(.text+0x6f5): undefined reference to `glslang::InitializeProcess()'
rpcs3/CMakeFiles/rpcs3.dir/Emu/RSX/VK/VKCommonDecompiler.cpp.o: In function `vk::finalize_compiler_context()':
rpcs3/Emu/RSX/VK/VKCommonDecompiler.cpp:(.text+0x856): undefined reference to `glslang::FinalizeProcess()'
* build/msvc: add missing glslang include directory after 6bb3f1b4d7
"c:\projects\rpcs3\rpcs3\VKGSRender.vcxproj" (default target) (15) ->
(ClCompile target) ->
Emu\RSX\VK\VKCommonDecompiler.cpp(4): fatal error C1083: Cannot open include file: 'SPIRV/GlslangToSpv.h': No such file or directory [c:\projects\rpcs3\rpcs3\VKGSRender.vcxproj]
* sys_net: don't use fds_bits from a system header on FreeBSD
rpcs3/Emu/Cell/Modules/sys_net.cpp:137:14: error: no member named '__fds_bits' in
'sys_net::fd_set'; did you mean 'fds_bits'?
if (src->fds_bits[i] & (1 << bit))
^~~~~~~~
fds_bits
/usr/include/sys/select.h:75:18: note: expanded from macro 'fds_bits'
#define fds_bits __fds_bits
^
rpcs3/Emu/Cell/Modules/sys_net.h:114:13: note: 'fds_bits' declared here
be_t<u32> fds_bits[32];
^
* GUI: fallback to xdg-open on other Unices
rpcs3/Gui/GameViewer.cpp:289:26: error: use of undeclared identifier 'command'
wxExecute(fmt::FromUTF8(command));
^
* File: FreeBSD never supported copyfile(3) but sendfile(2) works fine
Utilities/File.cpp:114:10: fatal error: 'copyfile.h' file not found
#include <copyfile.h>
^~~~~~~~~~~~
* Thread: add signal handling for BSDs
Utilities/Thread.cpp:761:23: error: use of undeclared identifier 'REG_RAX'
static const decltype(REG_RAX) reg_table[] =
^
Utilities/Thread.cpp:763:2: error: use of undeclared identifier 'REG_RAX'
REG_RAX, REG_RCX, REG_RDX, REG_RBX, REG_RSP, REG_RBP, REG_RSI, REG_RDI,
^
Utilities/Thread.cpp:763:11: error: use of undeclared identifier 'REG_RCX'
REG_RAX, REG_RCX, REG_RDX, REG_RBX, REG_RSP, REG_RBP, REG_RSI, REG_RDI,
^
Utilities/Thread.cpp:763:20: error: use of undeclared identifier 'REG_RDX'
REG_RAX, REG_RCX, REG_RDX, REG_RBX, REG_RSP, REG_RBP, REG_RSI, REG_RDI,
^
Utilities/Thread.cpp:763:29: error: use of undeclared identifier 'REG_RBX'
REG_RAX, REG_RCX, REG_RDX, REG_RBX, REG_RSP, REG_RBP, REG_RSI, REG_RDI,
^
Utilities/Thread.cpp:763:38: error: use of undeclared identifier 'REG_RSP'
REG_RAX, REG_RCX, REG_RDX, REG_RBX, REG_RSP, REG_RBP, REG_RSI, REG_RDI,
^
Utilities/Thread.cpp:763:47: error: use of undeclared identifier 'REG_RBP'
REG_RAX, REG_RCX, REG_RDX, REG_RBX, REG_RSP, REG_RBP, REG_RSI, REG_RDI,
^
Utilities/Thread.cpp:763:56: error: use of undeclared identifier 'REG_RSI'
REG_RAX, REG_RCX, REG_RDX, REG_RBX, REG_RSP, REG_RBP, REG_RSI, REG_RDI,
^
Utilities/Thread.cpp:763:65: error: use of undeclared identifier 'REG_RDI'
REG_RAX, REG_RCX, REG_RDX, REG_RBX, REG_RSP, REG_RBP, REG_RSI, REG_RDI,
^
Utilities/Thread.cpp:764:2: error: use of undeclared identifier 'REG_R8'
REG_R8, REG_R9, REG_R10, REG_R11, REG_R12, REG_R13, REG_R14, REG_R15, REG_RIP
^
Utilities/Thread.cpp:764:10: error: use of undeclared identifier 'REG_R9'
REG_R8, REG_R9, REG_R10, REG_R11, REG_R12, REG_R13, REG_R14, REG_R15, REG_RIP
^
Utilities/Thread.cpp:764:18: error: use of undeclared identifier 'REG_R10'
REG_R8, REG_R9, REG_R10, REG_R11, REG_R12, REG_R13, REG_R14, REG_R15, REG_RIP
^
Utilities/Thread.cpp:764:27: error: use of undeclared identifier 'REG_R11'
REG_R8, REG_R9, REG_R10, REG_R11, REG_R12, REG_R13, REG_R14, REG_R15, REG_RIP
^
Utilities/Thread.cpp:764:36: error: use of undeclared identifier 'REG_R12'
REG_R8, REG_R9, REG_R10, REG_R11, REG_R12, REG_R13, REG_R14, REG_R15, REG_RIP
^
Utilities/Thread.cpp:764:45: error: use of undeclared identifier 'REG_R13'
REG_R8, REG_R9, REG_R10, REG_R11, REG_R12, REG_R13, REG_R14, REG_R15, REG_RIP
^
Utilities/Thread.cpp:764:54: error: use of undeclared identifier 'REG_R14'
REG_R8, REG_R9, REG_R10, REG_R11, REG_R12, REG_R13, REG_R14, REG_R15, REG_RIP
^
Utilities/Thread.cpp:764:63: error: use of undeclared identifier 'REG_R15'
REG_R8, REG_R9, REG_R10, REG_R11, REG_R12, REG_R13, REG_R14, REG_R15, REG_RIP
^
Utilities/Thread.cpp:764:72: error: use of undeclared identifier 'REG_RIP'
REG_R8, REG_R9, REG_R10, REG_R11, REG_R12, REG_R13, REG_R14, REG_R15, REG_RIP
^
Utilities/Thread.cpp:792:26: error: no member named 'gregs' in '__mcontext'
const u64 reg_value = *X64REG(context, reg - X64R_RAX);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Utilities/Thread.cpp:767:55: note: expanded from macro 'X64REG'
#define X64REG(context, reg) (&(context)->uc_mcontext.gregs[reg_table[reg]])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:804:21: error: no member named 'gregs' in '__mcontext'
out_value = (u8)(*X64REG(context, reg - X64R_AL));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Utilities/Thread.cpp:767:55: note: expanded from macro 'X64REG'
#define X64REG(context, reg) (&(context)->uc_mcontext.gregs[reg_table[reg]])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:809:21: error: no member named 'gregs' in '__mcontext'
out_value = (u8)(*X64REG(context, reg - X64R_AH) >> 8);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Utilities/Thread.cpp:767:55: note: expanded from macro 'X64REG'
#define X64REG(context, reg) (&(context)->uc_mcontext.gregs[reg_table[reg]])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:815:31: error: no member named 'gregs' in '__mcontext'
const s8 imm_value = *(s8*)(RIP(context) + i_size - 1);
^~~~~~~~~~~~
Utilities/Thread.cpp:784:18: note: expanded from macro 'RIP'
#define RIP(c) (*X64REG((c), 16))
^~~~~~~~~~~~~~~
Utilities/Thread.cpp:767:55: note: expanded from macro 'X64REG'
#define X64REG(context, reg) (&(context)->uc_mcontext.gregs[reg_table[reg]])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:827:33: error: no member named 'gregs' in '__mcontext'
const s16 imm_value = *(s16*)(RIP(context) + i_size - 2);
^~~~~~~~~~~~
Utilities/Thread.cpp:784:18: note: expanded from macro 'RIP'
#define RIP(c) (*X64REG((c), 16))
^~~~~~~~~~~~~~~
Utilities/Thread.cpp:767:55: note: expanded from macro 'X64REG'
#define X64REG(context, reg) (&(context)->uc_mcontext.gregs[reg_table[reg]])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:836:33: error: no member named 'gregs' in '__mcontext'
const s32 imm_value = *(s32*)(RIP(context) + i_size - 4);
^~~~~~~~~~~~
Utilities/Thread.cpp:784:18: note: expanded from macro 'RIP'
#define RIP(c) (*X64REG((c), 16))
^~~~~~~~~~~~~~~
Utilities/Thread.cpp:767:55: note: expanded from macro 'X64REG'
#define X64REG(context, reg) (&(context)->uc_mcontext.gregs[reg_table[reg]])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:846:20: error: no member named 'gregs' in '__mcontext'
out_value = (u32)RCX(context);
^~~~~~~~~~~~
Utilities/Thread.cpp:779:18: note: expanded from macro 'RCX'
#define RCX(c) (*X64REG((c), 1))
^~~~~~~~~~~~~~
Utilities/Thread.cpp:767:55: note: expanded from macro 'X64REG'
#define X64REG(context, reg) (&(context)->uc_mcontext.gregs[reg_table[reg]])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:851:19: error: no member named 'gregs' in '__mcontext'
const u32 _cf = EFLAGS(context) & 0x1;
^~~~~~~~~~~~~~~
Utilities/Thread.cpp:769:49: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:851:19: error: use of undeclared identifier 'REG_EFL'
Utilities/Thread.cpp:769:55: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
^
Utilities/Thread.cpp:852:19: error: no member named 'gregs' in '__mcontext'
const u32 _zf = EFLAGS(context) & 0x40;
^~~~~~~~~~~~~~~
Utilities/Thread.cpp:769:49: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:852:19: error: use of undeclared identifier 'REG_EFL'
Utilities/Thread.cpp:769:55: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
^
Utilities/Thread.cpp:853:19: error: no member named 'gregs' in '__mcontext'
const u32 _sf = EFLAGS(context) & 0x80;
^~~~~~~~~~~~~~~
Utilities/Thread.cpp:769:49: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:853:19: error: use of undeclared identifier 'REG_EFL'
Utilities/Thread.cpp:769:55: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
^
Utilities/Thread.cpp:854:19: error: no member named 'gregs' in '__mcontext'
const u32 _of = EFLAGS(context) & 0x800;
^~~~~~~~~~~~~~~
Utilities/Thread.cpp:769:49: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:854:19: error: use of undeclared identifier 'REG_EFL'
Utilities/Thread.cpp:769:55: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
^
Utilities/Thread.cpp:855:19: error: no member named 'gregs' in '__mcontext'
const u32 _pf = EFLAGS(context) & 0x4;
^~~~~~~~~~~~~~~
Utilities/Thread.cpp:769:49: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:855:19: error: use of undeclared identifier 'REG_EFL'
Utilities/Thread.cpp:769:55: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
^
Utilities/Thread.cpp:885:12: error: no member named 'gregs' in '__mcontext'
case 1: *X64REG(context, reg - X64R_RAX) = value & 0xff | *X64REG(context, re...
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Utilities/Thread.cpp:767:55: note: expanded from macro 'X64REG'
#define X64REG(context, reg) (&(context)->uc_mcontext.gregs[reg_table[reg]])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:885:62: error: no member named 'gregs' in '__mcontext'
...*X64REG(context, reg - X64R_RAX) = value & 0xff | *X64REG(context, reg - X64R_RAX) & 0xffffff...
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Utilities/Thread.cpp:767:55: note: expanded from macro 'X64REG'
#define X64REG(context, reg) (&(context)->uc_mcontext.gregs[reg_table[reg]])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:886:12: error: no member named 'gregs' in '__mcontext'
case 2: *X64REG(context, reg - X64R_RAX) = value & 0xffff | *X64REG(context, ...
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Utilities/Thread.cpp:767:55: note: expanded from macro 'X64REG'
#define X64REG(context, reg) (&(context)->uc_mcontext.gregs[reg_table[reg]])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:886:64: error: no member named 'gregs' in '__mcontext'
...reg - X64R_RAX) = value & 0xffff | *X64REG(context, reg - X64R_RAX) & 0xffff0000; return true;
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Utilities/Thread.cpp:767:55: note: expanded from macro 'X64REG'
#define X64REG(context, reg) (&(context)->uc_mcontext.gregs[reg_table[reg]])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:887:12: error: no member named 'gregs' in '__mcontext'
case 4: *X64REG(context, reg - X64R_RAX) = value & 0xffffffff; return true;
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Utilities/Thread.cpp:767:55: note: expanded from macro 'X64REG'
#define X64REG(context, reg) (&(context)->uc_mcontext.gregs[reg_table[reg]])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:888:12: error: no member named 'gregs' in '__mcontext'
case 8: *X64REG(context, reg - X64R_RAX) = value; return true;
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Utilities/Thread.cpp:767:55: note: expanded from macro 'X64REG'
#define X64REG(context, reg) (&(context)->uc_mcontext.gregs[reg_table[reg]])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:913:3: error: no member named 'gregs' in '__mcontext'
EFLAGS(context) |= 0x1; // set CF
^~~~~~~~~~~~~~~
Utilities/Thread.cpp:769:49: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:913:3: error: use of undeclared identifier 'REG_EFL'
Utilities/Thread.cpp:769:55: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
^
Utilities/Thread.cpp:917:3: error: no member named 'gregs' in '__mcontext'
EFLAGS(context) &= ~0x1; // clear CF
^~~~~~~~~~~~~~~
Utilities/Thread.cpp:769:49: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:917:3: error: use of undeclared identifier 'REG_EFL'
Utilities/Thread.cpp:769:55: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
^
Utilities/Thread.cpp:922:3: error: no member named 'gregs' in '__mcontext'
EFLAGS(context) |= 0x40; // set ZF
^~~~~~~~~~~~~~~
Utilities/Thread.cpp:769:49: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:922:3: error: use of undeclared identifier 'REG_EFL'
Utilities/Thread.cpp:769:55: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
^
Utilities/Thread.cpp:926:3: error: no member named 'gregs' in '__mcontext'
EFLAGS(context) &= ~0x40; // clear ZF
^~~~~~~~~~~~~~~
Utilities/Thread.cpp:769:49: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:926:3: error: use of undeclared identifier 'REG_EFL'
Utilities/Thread.cpp:769:55: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
^
Utilities/Thread.cpp:931:3: error: no member named 'gregs' in '__mcontext'
EFLAGS(context) |= 0x80; // set SF
^~~~~~~~~~~~~~~
Utilities/Thread.cpp:769:49: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:931:3: error: use of undeclared identifier 'REG_EFL'
Utilities/Thread.cpp:769:55: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
^
Utilities/Thread.cpp:935:3: error: no member named 'gregs' in '__mcontext'
EFLAGS(context) &= ~0x80; // clear SF
^~~~~~~~~~~~~~~
Utilities/Thread.cpp:769:49: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:935:3: error: use of undeclared identifier 'REG_EFL'
Utilities/Thread.cpp:769:55: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
^
Utilities/Thread.cpp:940:3: error: no member named 'gregs' in '__mcontext'
EFLAGS(context) |= 0x800; // set OF
^~~~~~~~~~~~~~~
Utilities/Thread.cpp:769:49: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:940:3: error: use of undeclared identifier 'REG_EFL'
Utilities/Thread.cpp:769:55: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
^
Utilities/Thread.cpp:944:3: error: no member named 'gregs' in '__mcontext'
EFLAGS(context) &= ~0x800; // clear OF
^~~~~~~~~~~~~~~
Utilities/Thread.cpp:769:49: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:944:3: error: use of undeclared identifier 'REG_EFL'
Utilities/Thread.cpp:769:55: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
^
Utilities/Thread.cpp:953:3: error: no member named 'gregs' in '__mcontext'
EFLAGS(context) |= 0x4; // set PF
^~~~~~~~~~~~~~~
Utilities/Thread.cpp:769:49: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:953:3: error: use of undeclared identifier 'REG_EFL'
Utilities/Thread.cpp:769:55: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
^
Utilities/Thread.cpp:957:3: error: no member named 'gregs' in '__mcontext'
EFLAGS(context) &= ~0x4; // clear PF
^~~~~~~~~~~~~~~
Utilities/Thread.cpp:769:49: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:957:3: error: use of undeclared identifier 'REG_EFL'
Utilities/Thread.cpp:769:55: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
^
Utilities/Thread.cpp:962:3: error: no member named 'gregs' in '__mcontext'
EFLAGS(context) |= 0x10; // set AF
^~~~~~~~~~~~~~~
Utilities/Thread.cpp:769:49: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:962:3: error: use of undeclared identifier 'REG_EFL'
Utilities/Thread.cpp:769:55: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
^
Utilities/Thread.cpp:966:3: error: no member named 'gregs' in '__mcontext'
EFLAGS(context) &= ~0x10; // clear AF
^~~~~~~~~~~~~~~
Utilities/Thread.cpp:769:49: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:966:3: error: use of undeclared identifier 'REG_EFL'
Utilities/Thread.cpp:769:55: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
^
Utilities/Thread.cpp:976:7: error: no member named 'gregs' in '__mcontext'
if (EFLAGS(context) & 0x400 /* direction flag */)
^~~~~~~~~~~~~~~
Utilities/Thread.cpp:769:49: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:976:7: error: use of undeclared identifier 'REG_EFL'
Utilities/Thread.cpp:769:55: note: expanded from macro 'EFLAGS'
#define EFLAGS(context) ((context)->uc_mcontext.gregs[REG_EFL])
^
Utilities/Thread.cpp:1020:25: error: no member named 'gregs' in '__mcontext'
auto code = (const u8*)RIP(context);
^~~~~~~~~~~~
Utilities/Thread.cpp:784:18: note: expanded from macro 'RIP'
#define RIP(c) (*X64REG((c), 16))
^~~~~~~~~~~~~~~
Utilities/Thread.cpp:767:55: note: expanded from macro 'X64REG'
#define X64REG(context, reg) (&(context)->uc_mcontext.gregs[reg_table[reg]])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:1146:3: error: no member named 'gregs' in '__mcontext'
RIP(context) += i_size;
^~~~~~~~~~~~
Utilities/Thread.cpp:784:18: note: expanded from macro 'RIP'
#define RIP(c) (*X64REG((c), 16))
^~~~~~~~~~~~~~~
Utilities/Thread.cpp:767:55: note: expanded from macro 'X64REG'
#define X64REG(context, reg) (&(context)->uc_mcontext.gregs[reg_table[reg]])
~~~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:1368:47: error: no member named 'gregs' in '__mcontext'
const bool is_writing = context->uc_mcontext.gregs[REG_ERR] & 0x2;
~~~~~~~~~~~~~~~~~~~~ ^
Utilities/Thread.cpp:1368:53: error: use of undeclared identifier 'REG_ERR'
const bool is_writing = context->uc_mcontext.gregs[REG_ERR] & 0x2;
^
Utilities/Thread.cpp:1393:89: error: no member named 'gregs' in '__mcontext'
...%s location %p at %p.", cause, info->si_addr, RIP(context)));
^~~~~~~~~~~~
Utilities/Thread.cpp:784:18: note: expanded from macro 'RIP'
#define RIP(c) (*X64REG((c), 16))
^~~~~~~~~~~~~~~
Utilities/Thread.cpp:767:55: note: expanded from macro 'X64REG'
#define X64REG(context, reg) (&(context)->uc_mcontext.gregs[reg_table[reg]])
~~~~~~~~~~~~~~~~~~~~~~ ^
* Thread: add explict casts for incomplete pthread_t on some platforms
Utilities/Thread.cpp:1467:17: error: no viable overloaded '='
ctrl->m_thread = thread;
~~~~~~~~~~~~~~ ^ ~~~~~~
Utilities/Atomic.h:776:12: note: candidate function not viable: cannot convert argument of
incomplete type 'pthread_t' (aka 'pthread *') to 'const atomic_t<unsigned long>' for 1st
argument
atomic_t& operator =(const atomic_t&) = delete;
^
Utilities/Atomic.h:902:7: note: candidate function not viable: cannot convert argument of
incomplete type 'pthread_t' (aka 'pthread *') to 'const type' (aka 'const unsigned long') for
1st argument
type operator =(const type& rhs)
^
Utilities/Thread.cpp:1656:3: error: no matching function for call to 'pthread_detach'
pthread_detach(m_thread.raw());
^~~~~~~~~~~~~~
/usr/include/pthread.h:218:6: note: candidate function not viable: no known conversion from 'type'
(aka 'unsigned long') to 'pthread_t' (aka 'pthread *') for 1st argument
int pthread_detach(pthread_t);
^
* build: dlopen() maybe in libc
/usr/bin/ld: cannot find -ldl
c++: error: linker command failed with exit code 1 (use -v to see invocation)
* build: iconv() maybe available on some BSDs in libc
/usr/bin/ld: cannot find -liconv
c++: error: linker command failed with exit code 1 (use -v to see invocation)
* build: hidapi-hidraw is only built on Linux
/usr/bin/ld: cannot find -lhidapi-hidraw
c++: error: linker command failed with exit code 1 (use -v to see invocation)
* Thread: use getrusage() on more POSIX-like systems
* Qt: don't return NULL handle on other platforms
rpcs3/rpcs3qt/gs_frame.cpp:120:1: warning: control reaches end of non-void function [-Wreturn-type]
}
^
* build: properly disable Vulkan on other platforms
In file included from rpcs3/rpcs3_app.cpp:40:
In file included from rpcs3/Emu/RSX/VK/VKGSRender.h:3:
rpcs3/Emu/RSX/VK/VKHelpers.h:1209:42: error: unknown type name 'device_queues'
std::vector<VkBool32> supportsPresent(device_queues);
^
rpcs3/Emu/RSX/VK/VKHelpers.h:1211:4: error: expected member name or ';' after declaration specifiers
for (u32 index = 0; index < device_queues; index++)
^
rpcs3/Emu/RSX/VK/VKHelpers.h:1221:4: error: expected member name or ';' after declaration specifiers
for (u32 i = 0; i < device_queues; i++)
^
rpcs3/Emu/RSX/VK/VKHelpers.h:1256:4: error: expected member name or ';' after declaration specifiers
if (graphicsQueueNodeIndex != presentQueueNodeIndex)
^
rpcs3/Emu/RSX/VK/VKHelpers.h:1261:4: error: expected member name or ';' after declaration specifiers
CHECK_RESULT(vkGetPhysicalDeviceSurfaceFormatsKHR(dev, surface, &formatCount, nullptr));
^
[...]
/usr/bin/ld: cannot find -lvulkan
c++: error: linker command failed with exit code 1 (use -v to see invocation)
* build: make install/strip work by moving commands
* Qt: create surface for GL context if it wasn't ready
#0 strlen (str=0x0) at /usr/src/lib/libc/string/strlen.c:100
#1 0x000000000090f02e in std::__1::char_traits<char>::length (__s=0x0)
at /usr/include/c++/v1/__string:215
#2 std::__1::basic_string<char, std::__1::char_traits<char>, std::__1::allocator<char> >::basic_string (__s=0x0, this=<optimized out>) at /usr/include/c++/v1/string:1547
#3 gl::capabilities::initialize (this=0x2ba32a0 <gl::g_driver_caps>)
at rpcs3/Emu/RSX/GL/GLHelpers.h:133
#4 0x000000000090d3dd in gl::get_driver_caps () at rpcs3/Emu/RSX/GL/GLHelpers.cpp:56
#5 0x00000000008fa511 in GLGSRender::on_init_thread (this=0x838d30018)
at rpcs3/Emu/RSX/GL/GLGSRender.cpp:484
#6 0x0000000000938f9e in rsx:🧵:on_task (this=0x838d30018)
at rpcs3/Emu/RSX/RSXThread.cpp:334
#7 0x0000000000abc329 in task_stack::task_type<named_thread::start_thread(std::__1::shared_ptr<void> const&)::$_10>::invoke() ()
#8 0x0000000000abc114 in thread_ctrl::start(std::__1::shared_ptr<thread_ctrl> const&, task_stack)::$_7::__invoke(void*) ()
#9 0x0000000801e60c35 in thread_start (curthread=0x843650a00)
at /usr/src/lib/libthr/thread/thr_create.c:289
#10 0x0000000000000000 in ?? ()
* build: don't abort without git metadata
-- Found Git: /usr/local/bin/git (found version "2.13.1")
fatal: Not a git repository (or any parent up to mount point /)
Stopping at filesystem boundary (GIT_DISCOVERY_ACROSS_FILESYSTEM not set).
CMake Warning at git-version.cmake:12 (message):
git rev-list failed, unable to include version.
* build: non-parallel needs git-version.h earlier
rpcs3/rpcs3_version.cpp:3:10: fatal error: 'git-version.h' file not found
#include "git-version.h"
^~~~~~~~~~~~~~~
1 error generated.
`unveil<>` renamed to `fmt_unveil<>`, now packs args to u64 imitating va_args
`bijective...` removed, `cfg::enum_entry` now uses formatting system
`fmt_class_string<>` added, providing type-specific "%s" handler function
Added `fmt::append`, removed `fmt::narrow` (too obscure)
Utilities/cfmt.h: C-style format template function (WIP)
Minor formatting fixes and cleanup
* Optimizations
1) Some headers simplified for better compilation time
2) Some templates simplified for smaller executable size
3) Eliminate std::future to fix compilation for mingw64
4) PKG installation can be cancelled now
5) cellGame fixes
6) XAudio2 fix for mingw64
7) PPUInterpreter bug fixed (Clang)
* any_pod<> implemented
Aliases: any16, any32, any64
rsx::make_command fixed
Added some basic information along with certain exceptions. This should
prevent some types of useless reports and assist users in determining
certain issues with their setup.
