'AS'.
Using 'S' as this was a terrible idea. Arguably, 'AS' is not much
better, but it at least follows the idea of using initialisms and
removes active confusion about the AllocaSlices variable and a Slice
variable.
llvm-svn: 219963
clang-modernize.
I did have to clean up the variable types and whitespace a bit because
the use of auto made the code much less readable here.
llvm-svn: 219962
Summary:
Backends can use setInsertFencesForAtomic to signal to the middle-end that
montonic is the only memory ordering they can accept for
stores/loads/rmws/cmpxchg. The code lowering those accesses with a stronger
ordering to fences + monotonic accesses is currently living in
SelectionDAGBuilder.cpp. In this patch I propose moving this logic out of it
for several reasons:
- There is lots of redundancy to avoid: extremely similar logic already
exists in AtomicExpand.
- The current code in SelectionDAGBuilder does not use any target-hooks, it
does the same transformation for every backend that requires it
- As a result it is plain *unsound*, as it was apparently designed for ARM.
It happens to mostly work for the other targets because they are extremely
conservative, but Power for example had to switch to AtomicExpand to be
able to use lwsync safely (see r218331).
- Because it produces IR-level fences, it cannot be made sound ! This is noted
in the C++11 standard (section 29.3, page 1140):
```
Fences cannot, in general, be used to restore sequential consistency for atomic
operations with weaker ordering semantics.
```
It can also be seen by the following example (called IRIW in the litterature):
```
atomic<int> x = y = 0;
int r1, r2, r3, r4;
Thread 0:
x.store(1);
Thread 1:
y.store(1);
Thread 2:
r1 = x.load();
r2 = y.load();
Thread 3:
r3 = y.load();
r4 = x.load();
```
r1 = r3 = 1 and r2 = r4 = 0 is impossible as long as the accesses are all seq_cst.
But if they are lowered to monotonic accesses, no amount of fences can prevent it..
This patch does three things (I could cut it into parts, but then some of them
would not be tested/testable, please tell me if you would prefer that):
- it provides a default implementation for emitLeadingFence/emitTrailingFence in
terms of IR-level fences, that mimic the original logic of SelectionDAGBuilder.
As we saw above, this is unsound, but the best that can be done without knowing
the targets well (and there is a comment warning about this risk).
- it then switches Mips/Sparc/XCore to use AtomicExpand, relying on this default
implementation (that exactly replicates the logic of SelectionDAGBuilder, so no
functional change)
- it finally erase this logic from SelectionDAGBuilder as it is dead-code.
Ideally, each target would define its own override for emitLeading/TrailingFence
using target-specific fences, but I do not know the Sparc/Mips/XCore memory model
well enough to do this, and they appear to be dealing fine with the ARM-inspired
default expansion for now (probably because they are overly conservative, as
Power was). If anyone wants to compile fences more agressively on these
platforms, the long comment should make it clear why he should first override
emitLeading/TrailingFence.
Test Plan: make check-all, no functional change
Reviewers: jfb, t.p.northover
Subscribers: aemerson, llvm-commits
Differential Revision: http://reviews.llvm.org/D5474
llvm-svn: 219957
iterators.
There are a ton of places where it essentially wants ranges
rather than just iterators. This is just the first step that adds the
core slice range typedefs and uses them in a couple of places. I still
have to explicitly construct them because they've not been punched
throughout the entire set of code. More range-based cleanups incoming.
llvm-svn: 219955
Summary:
Currently, call slot optimization requires that if the destination is an
argument, the argument has the sret attribute. This is to ensure that
the memory access won't trap. In addition to sret, we can also allow the
optimization to happen for arguments that have the new dereferenceable
attribute, which gives the same guarantee.
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5832
llvm-svn: 219950
If a square root call has an FP multiplication argument that can be reassociated,
then we can hoist a repeated factor out of the square root call and into a fabs().
In the simplest case, this:
y = sqrt(x * x);
becomes this:
y = fabs(x);
This patch relies on an earlier optimization in instcombine or reassociate to put the
multiplication tree into a canonical form, so we don't have to search over
every permutation of the multiplication tree.
Because there are no IR-level FastMathFlags for intrinsics (PR21290), we have to
use function-level attributes to do this optimization. This needs to be fixed
for both the intrinsics and in the backend.
Differential Revision: http://reviews.llvm.org/D5787
llvm-svn: 219944
When the constant divisor was larger than 32bits, then the optimized code
generated for the AArch64 backend would emit the wrong code, because the shift
was defined as a shift of a 32bit constant '(1<<Lg2(divisor))' and we would
loose the upper 32bits.
This fixes rdar://problem/18678801.
llvm-svn: 219934
Summary:
In order to support big endian targets for the BuildPairF64 nodes we
just need to swap the low/high pair registers. Additionally, for the
ExtractElementF64 nodes we have to calculate the correct stack offset
with respect to the node's register/operand that we want to extract.
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5753
llvm-svn: 219931
Make tail recursion elimination a bit more aggressive. This allows us to get
tail recursion on functions that are just branches to a different function. The
fact that the function takes a byval argument does not restrict it from being
optimised into just a tail call.
llvm-svn: 219899
Philip Reames and I had a long conversation about this, mostly because it is
not obvious why the current logic is correct. Hopefully, these comments will
prevent such confusion in the future.
llvm-svn: 219882
For pointer-typed function arguments, enhanced alignment can be asserted using
the 'align' attribute. When inlining, if this enhanced alignment information is
not otherwise available, preserve it using @llvm.assume-based alignment
assumptions.
llvm-svn: 219876
Clang CodeGen had a utility function for creating pointer alignment assumptions
using the @llvm.assume intrinsic. This functionality will also be needed by the
inliner (to preserve function-argument alignment attributes when inlining), so
this moves the utility function into IRBuilder where it can be used both by
Clang CodeGen and also other LLVM-level code.
llvm-svn: 219875
In AVX512f we support 64x2 and 32x8 inserts via matching them to 32x4 and 64x4
respectively. These are matched by "Alt" Pat<>'s (Alt stands for alternative
VTs).
Since DQ has native support for these intructions, I peeled off the non-"Alt"
part of the baseclass into vinsert_for_size_no_alt. The DQ instructions are
derived from this multiclass. The "Alt" Pat<>'s are disabled with DQ.
Fixes <rdar://problem/18426089>
llvm-svn: 219874
The new attributes are NumElts and the CD8TupleForm. This prepares the code
to enable x8 and x2 inserts.
NFC, no change in X86.td.expanded except for the new attributes.
llvm-svn: 219871
It's the W bit that selects between 32 or 64 elt type and not the opcode. The
opcode selects between the width of the insert (128 or 256).
llvm-svn: 219870
This CL introduces MachOObjectFile::getUuid(). This function returns an ArrayRef to the object file's UUID, or an empty ArrayRef if the object file doesn't contain an LC_UUID load command.
The new function is gonna be used by llvm-symbolizer.
llvm-svn: 219866
The SelectDS1Addr1Offset complex pattern always tries to store constant
lds pointers in the offset operand and store a zero value in the addr operand.
Since the addr operand does not accept immediates, the zero value
needs to first be copied to a register.
This newly created zero value will not go through normal instruction
selection, so we need to manually insert a V_MOV_B32_e32 in the complex
pattern.
This bug was hidden by the fact that if there was another zero value
in the DAG that had not been selected yet, then the CSE done by the DAG
would use the unselected node for the addr operand rather than the one
that was just created. This would lead to the zero value being selected
and the DAG automatically inserting a V_MOV_B32_e32 instruction.
llvm-svn: 219848
This original fix for the build break was correct. LLVM_ATTRIBUTE_USED
removes the warning message because it keeps the function in the object
file. LLVM_ATTRIBUTE_UNUSED indicates that it may or may not be used
depending on build settings.
llvm-svn: 219846
Store `User::NumOperands` (and `MDNode::NumOperands`) in `Value`.
On 64-bit host architectures, this reduces `sizeof(User)` and all
subclasses by 8, and has no effect on `sizeof(Value)` (or, incidentally,
on `sizeof(MDNode)`).
On 32-bit host architectures, this increases `sizeof(Value)` by 4.
However, it has no effect on `sizeof(User)` and `sizeof(MDNode)`, so the
only concrete subclasses of `Value` that actually see the increase are
`BasicBlock`, `Argument`, `InlineAsm`, and `MDString`. Moreover, I'll
be shocked and confused if this causes a tangible memory regression.
This has no functionality change (other than memory footprint).
llvm-svn: 219845
A follow-up commit will modify the memory-layout of `Value`, `User`, and
`MDNode`. First fix the comments to be doxygen-friendly (and to follow
the coding standards).
- Use "\brief" instead of "repeatedName -".
- Add a brief intro where it was missing.
- Remove duplicated comments from source files (and a couple of
noisy/trivial comments altogether).
llvm-svn: 219844
If x is known to have the range [a, b) in a loop predicated by (icmp
ne x, a), its range can be sharpened to [a + 1, b). Get
ScalarEvolution and hence IndVars to exploit this fact.
This change triggers an optimization to widen-loop-comp.ll, so it had
to be edited to get it to pass.
phabricator: http://reviews.llvm.org/D5639
llvm-svn: 219834
Truncate the operands of a switch instruction to a narrower type if the upper
bits are known to be all ones or zeros.
rdar://problem/17720004
llvm-svn: 219832
This is mostly a copy of the existing FastISel GEP code, but we have to
duplicate it for AArch64, because otherwise we would bail out even for simple
cases. This is because the standard fastEmit functions don't cover MUL at all
and ADD is lowered very inefficientily.
The original commit had a bug in the add emit logic, which has been fixed.
llvm-svn: 219831
When processing assembly like
.long .text
we were creating a new undefined symbol .text. GAS on the other hand would
handle that as a reference to the .text section.
This patch implements that by creating the section symbols earlier so that
they are visible during asm parsing.
The patch also updates llvm-readobj to print the symbol number in the relocation
dump so that the test can differentiate between two sections with the same name.
llvm-svn: 219829
