This enables proper lowering of non-byte sized loads. We still aren't
faithfully preserving memory types everywhere, so the legality checks
still only consider the size.
This will currently accept the old number of bytes syntax, and convert
it to a scalar. This should be removed in the near future (I think I
converted all of the tests already, but likely missed a few).
Not sure what the exact syntax and policy should be. We can continue
printing the number of bytes for non-generic instructions to avoid
test churn and only allow non-scalar types for generic instructions.
This will currently print the LLT in parentheses, but accept parsing
the existing integers and implicitly converting to scalar. The
parentheses are a bit ugly, but the parser logic seems unable to deal
without either parentheses or some keyword to indicate the start of a
type.
This patch relands https://reviews.llvm.org/D104454, but fixes some failing
builds on Mac OS which apparently has a different definition for size_t,
that caused 'ambiguous operator overload' for the implicit conversion
of TypeSize to a scalar value.
This reverts commit b732e6c9a8438e5204ac96c8ca76f9b11abf98ff.
To reflect that the size may be scalable, a TypeSize is returned
instead of an unsigned. In places where the result is used,
it currently relies on an implicit cast of TypeSize -> uint64_t,
which asserts that the type is not scalable.
This patch is NFC for fixed-width vectors.
Reviewed By: aemerson
Differential Revision: https://reviews.llvm.org/D104454
This also adds new interfaces for the fixed- and scalable case:
* LLT::fixed_vector
* LLT::scalable_vector
The strategy for migrating to the new interfaces was as follows:
* If the new LLT is a (modified) clone of another LLT, taking the
same number of elements, then use LLT::vector(OtherTy.getElementCount())
or if the number of elements is halfed/doubled, it uses .divideCoefficientBy(2)
or operator*. That is because there is no reason to specifically restrict
the types to 'fixed_vector'.
* If the algorithm works on the number of elements (as unsigned), then
just use fixed_vector. This will need to be fixed up in the future when
modifying the algorithm to also work for scalable vectors, and will need
then need additional tests to confirm the behaviour works the same for
scalable vectors.
* If the test used the '/*Scalable=*/true` flag of LLT::vector, then
this is replaced by LLT::scalable_vector.
Reviewed By: aemerson
Differential Revision: https://reviews.llvm.org/D104451
This patch aims to add the scalable property to LLT. The rest of the
patch-series changes the interfaces to take/return ElementCount and
TypeSize, which both have the ability to represent the scalable property.
The changes are mostly mechanical and aim to be non-functional changes
for fixed-width vectors.
For scalable vectors some unit tests have been added, but no effort has
been put into making any of the GlobalISel algorithms work with scalable
vectors yet. That will be left as future work.
The work is split into a series of 5 patches to make reviews easier.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D104450
- Distinct metadata needs generating in the codegen to attach correct
AAInfo on the loads/stores after lowering, merging, and other relevant
transformations.
- This patch adds 'MachhineModuleSlotTracker' to help assign slot
numbers to these newly generated unnamed metadata nodes.
- To help 'MachhineModuleSlotTracker' track machine metadata, the
original 'SlotTracker' is rebased from 'AbstractSlotTrackerStorage',
which provides basic interfaces to create/retrive metadata slots. In
addition, once LLVM IR is processsed, additional hooks are also
introduced to help collect machine metadata and assign them slot
numbers.
- Finally, if there is any such machine metadata, 'MIRPrinter' outputs
an additional 'machineMetadataNodes' field containing all the
definition of those nodes.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D103205
G_INSERT legalization is incomplete and doesn't work very
well. Instead try to use sequences of G_MERGE_VALUES/G_UNMERGE_VALUES
padding with undef values (although this can get pretty large).
For the case of load/store narrowing, this is still performing the
load/stores in irregularly sized pieces. It might be cleaner to split
this down into equal sized pieces, and rely on load/store merging to
optimize it.
Fixes getTypeConversion to return `TypeScalarizeScalableVector` when a scalable vector
type cannot be legalized by widening/splitting. When this is the method of legalization
found, getTypeLegalizationCost will return an Invalid cost.
The getMemoryOpCost, getMaskedMemoryOpCost & getGatherScatterOpCost functions already call
getTypeLegalizationCost and will now also return an Invalid cost for unsupported types.
Reviewed By: sdesmalen, david-arm
Differential Revision: https://reviews.llvm.org/D102515
It's still in use in a few places so we can't delete it yet but there's not
many at this point.
Differential Revision: https://reviews.llvm.org/D103352
This makes it possible for targets to define their own MCObjectFileInfo.
This MCObjectFileInfo is then used to determine things like section alignment.
This is a follow up to D101462 and prepares for the RISCV backend defining the
text section alignment depending on the enabled extensions.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D101921
We're trying to move DebugLogging into instrumentation, rather than
being part of PassManagers/AnalysisManagers.
Reviewed By: ychen
Differential Revision: https://reviews.llvm.org/D102093
This untangles the MCContext and the MCObjectFileInfo. There is a circular
dependency between MCContext and MCObjectFileInfo. Currently this dependency
also exists during construction: You can't contruct a MOFI without a MCContext
without constructing the MCContext with a dummy version of that MOFI first.
This removes this dependency during construction. In a perfect world,
MCObjectFileInfo wouldn't depend on MCContext at all, but only be stored in the
MCContext, like other MC information. This is future work.
This also shifts/adds more information to the MCContext making it more
available to the different targets. Namely:
- TargetTriple
- ObjectFileType
- SubtargetInfo
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D101462
This utility allows more efficient start of pattern match.
Often MachineInstr(MI) is available and instead of using
mi_match(MI.getOperand(0).getReg(), MRI, ...) followed by
MRI.getVRegDef(Reg) that gives back MI we now use
mi_match(MI, MRI, ...).
Differential Revision: https://reviews.llvm.org/D99735
ConstantFoldingMIRBuilder was an experiment which is not used for
anything. The constant folding functionality is now part of
CSEMIRBuilder.
Differential Revision: https://reviews.llvm.org/D101050
Change the definition of G_SBFX and G_UBFX so that the lsb and width
can have different types than the src and dst operands.
Differential Revision: https://reviews.llvm.org/D99739
In order to bring up scalable vector support in LLVM incrementally,
we introduced behaviour to emit a warning, instead of an error, when
asking the wrong question of a scalable vector, like asking for the
fixed number of elements.
This patch puts that behaviour under a flag. The default behaviour is
that the compiler will always error, which means that all LLVM unit
tests and regression tests will now fail when a code-path is taken that
still uses the wrong interface.
The behaviour to demote an error to a warning can be individually enabled
for tools that want to support experimental use of scalable vectors.
This patch enables that behaviour when driving compilation from Clang.
This means that for users who want to try out scalable-vector support,
fixed-width codegen support, or build user-code with scalable vector
intrinsics, Clang will not crash and burn when the compiler encounters
such a case.
This allows us to do away with the following pattern in many of the SVE tests:
RUN: .... 2>%t
RUN: cat %t | FileCheck --check-prefix=WARN
WARN-NOT: warning: ...
The behaviour to emit warnings is only temporary and we expect this flag
to be removed in the future when scalable vector support is more stable.
This patch also has fixes the following tests:
unittests:
ScalableVectorMVTsTest.SizeQueries
SelectionDAGAddressAnalysisTest.unknownSizeFrameObjects
AArch64SelectionDAGTest.computeKnownBitsSVE_ZERO_EXTEND_VECTOR_INREG
regression tests:
Transforms/InstCombine/vscale_gep.ll
Reviewed By: paulwalker-arm, ctetreau
Differential Revision: https://reviews.llvm.org/D98856
Also, make it structurally required so it can't be forgotten and re-introduce
the bug that led to the rotten green tests.
Differential Revision: https://reviews.llvm.org/D99692
This patch adds a new llvm.experimental.stepvector intrinsic,
which takes no arguments and returns a linear integer sequence of
values of the form <0, 1, ...>. It is primarily intended for
scalable vectors, although it will work for fixed width vectors
too. It is intended that later patches will make use of this
new intrinsic when vectorising induction variables, currently only
supported for fixed width. I've added a new CreateStepVector
method to the IRBuilder, which will generate a call to this
intrinsic for scalable vectors and fall back on creating a
ConstantVector for fixed width.
For scalable vectors this intrinsic is lowered to a new ISD node
called STEP_VECTOR, which takes a single constant integer argument
as the step. During lowering this argument is set to a value of 1.
The reason for this additional argument at the codegen level is
because in future patches we will introduce various generic DAG
combines such as
mul step_vector(1), 2 -> step_vector(2)
add step_vector(1), step_vector(1) -> step_vector(2)
shl step_vector(1), 1 -> step_vector(2)
etc.
that encourage a canonical format for all targets. This hopefully
means all other targets supporting scalable vectors can benefit
from this too.
I've added cost model tests for both fixed width and scalable
vectors:
llvm/test/Analysis/CostModel/AArch64/neon-stepvector.ll
llvm/test/Analysis/CostModel/AArch64/sve-stepvector.ll
as well as codegen lowering tests for fixed width and scalable
vectors:
llvm/test/CodeGen/AArch64/neon-stepvector.ll
llvm/test/CodeGen/AArch64/sve-stepvector.ll
See this thread for discussion of the intrinsic:
https://lists.llvm.org/pipermail/llvm-dev/2021-January/147943.html
There is a bunch of similar bitfield extraction code throughout *ISelDAGToDAG.
E.g, ARMISelDAGToDAG, AArch64ISelDAGToDAG, and AMDGPUISelDAGToDAG all contain
code that matches a bitfield extract from an and + right shift.
Rather than duplicating code in the same way, this adds two opcodes:
- G_UBFX (unsigned bitfield extract)
- G_SBFX (signed bitfield extract)
They work like this
```
%x = G_UBFX %y, %lsb, %width
```
Where `lsb` and `width` are
- The least-significant bit of the extraction
- The width of the extraction
This will extract `width` bits from `%y`, starting at `lsb`. G_UBFX zero-extends
the result, while G_SBFX sign-extends the result.
This should allow us to use the combiner to match the bitfield extraction
patterns rather than duplicating pattern-matching code in each target.
Differential Revision: https://reviews.llvm.org/D98464
Suppresses an implicit TypeSize to uint64_t conversion warning.
We might be able to just not offset it since we're writing to a
Fixed stack object, but I wasn't sure so I just did what
DAGTypeLegalizer::IncrementPointer does.
Reviewed By: sdesmalen
Differential Revision: https://reviews.llvm.org/D98736
It is good to have a combined `divrem` instruction when the
`div` and `rem` are computed from identical input operands.
Some targets can lower them through a single expansion that
computes both division and remainder. It effectively reduces
the number of instructions than individually expanding them.
Reviewed By: arsenm, paquette
Differential Revision: https://reviews.llvm.org/D96013
This is recommit of 4c8fb7ddd6fa49258e0e9427e7345fb56ba522d4.
MIR in one unit test had mismatched types.
For vectors we consider a bit as known if it is the same for all demanded
vector elements (all elements by default). KnownBits BitWidth for vector
type is size of vector element. Add support for G_BUILD_VECTOR.
This allows combines of urem_pow2_to_mask in pre-legalizer combiner.
Differential Revision: https://reviews.llvm.org/D96122
:: (store 1 + 4, addrspace 1)
->
:: (store 1 into undef + 4, addrspace 1)
An offset without a base isn't terribly useful but it's convenient to update
the offset without checking the value. For example, when breaking apart
stores into smaller units
Differential Revision: https://reviews.llvm.org/D97812
For vectors we consider a bit as known if it is the same for all demanded
vector elements (all elements by default). KnownBits BitWidth for vector
type is size of vector element. Add support for G_BUILD_VECTOR.
This allows combines of urem_pow2_to_mask in pre-legalizer combiner.
Differential Revision: https://reviews.llvm.org/D96122
This merges more AMDGPU ABI lowering code into the generic call
lowering. Start cleaning up by factoring away more of the pack/unpack
logic into the buildCopy{To|From}Parts functions. These could use more
improvement, and the SelectionDAG versions are significantly more
complex, and we'll eventually have to emulate all of those cases too.
This is mostly NFC, but does result in some minor instruction
reordering. It also removes some of the limitations with mismatched
sizes the old code had. However, similarly to the merge on the input,
this is forcing gfx6/gfx7 to use the gfx8+ ABI (which is what we
actually want, but SelectionDAG is stuck using the weird emergent
ABI).
This also changes the load/store size for stack passed EVTs for
AArch64, which makes it consistent with the DAG behavior.
remove `Hi` `Lo` argument from `emitDwarfUnitLength`, so we
can make caller of emitDwarfUnitLength easier.
Reviewed By: MaskRay, dblaikie, ikudrin
Differential Revision: https://reviews.llvm.org/D96409
We may need to do some customization for DWARF unit length in DWARF
section headers for some targets for some code generation path.
For example, for XCOFF in assembly path, AIX assembler does not require
the debug section containing its debug unit length in the header.
Move emitDwarfUnitLength to MCStreamer class so that we can do
customization in different Streamers
Reviewed By: ikudrin
Differential Revision: https://reviews.llvm.org/D95932
Same implementation as G_SEXT_INREG.
Add a testcase to combine-sext-inreg for a concrete example, and a testcase
to KnownBitsTest.
Differential Revision: https://reviews.llvm.org/D96897
Some of these accidentally disabled tests failed as a result; updated
tests per @qcolombet instructions. A small number needed additional
updates because legalization has actually changed since they were
written.
Found by the Rotten Green Tests project.
Differential Revision: https://reviews.llvm.org/D95257
It's the same as the ZEXT/TRUNC case, except SrcBitWidth is given by the
immediate operand.
Update KnownBitsTest.cpp and a MIR test for a concrete example.
Differential Revision: https://reviews.llvm.org/D95566
These are widened to a wider UADDE/USUBE, with the overflow value
unused, and with the same synthesis of a new overflow value as for the
O operations.
Reviewed By: paquette
Differential Revision: https://reviews.llvm.org/D95326
