while experimenting. I'm reasonably sure this is correct, but please
tell me if these instructions have some strange property which makes this
change unsafe.
llvm-svn: 73746
casted induction variables in cases where the cast
isn't foldable. It ended up being a pessimization in
many cases. This could be fixed, but it would require
a bunch of complicated code in IVUsers' clients. The
advantages of this approach aren't visible enough to
justify it at this time.
llvm-svn: 73706
TurnCopyIntoImpDef turns a copy into implicit_def and remove the val# defined by it. This causes an scavenger assertion later if the def reaches other blocks. Disable the transformation if the value live interval extends beyond its def block.
llvm-svn: 73478
support for x86, and UMULO/SMULO for many architectures, including PPC
(PR4201), ARM, and Cell. The resulting expansion isn't perfect, but it's
not bad.
llvm-svn: 73477
incomming chain of the RETURN node. The incomming chain must
be the outgoing chain of the CALL node. This causes the
backend to identify tail calls that are not tail calls. This
patch fixes this.
llvm-svn: 73387
- Change register allocation hint to a pair of unsigned integers. The hint type is zero (which means prefer the register specified as second part of the pair) or entirely target dependent.
- Allow targets to specify alternative register allocation orders based on allocation hint.
Part 2.
- Use the register allocation hint system to implement more aggressive load / store multiple formation.
- Aggressively form LDRD / STRD. These are formed *before* register allocation. It has to be done this way to shorten live interval of base and offset registers. e.g.
v1025 = LDR v1024, 0
v1026 = LDR v1024, 0
=>
v1025,v1026 = LDRD v1024, 0
If this transformation isn't done before allocation, v1024 will overlap v1025 which means it more difficult to allocate a register pair.
- Even with the register allocation hint, it may not be possible to get the desired allocation. In that case, the post-allocation load / store multiple pass must fix the ldrd / strd instructions. They can either become ldm / stm instructions or back to a pair of ldr / str instructions.
This is work in progress, not yet enabled.
llvm-svn: 73381
consecutive addresses togther. This makes it easier for the post-allocation pass
to form ldm / stm.
This is step 1. We are still missing a lot of ldm / stm opportunities because
of register allocation are not done in the desired order. More enhancements
coming.
llvm-svn: 73291
out of sync with regular cc.
The only difference between the tail call cc and the normal
cc was that one parameter register - R9 - was reserved for
calling functions through a function pointer. After time the
tail call cc has gotten out of sync with the regular cc.
We can use R11 which is also caller saved but not used as
parameter register for potential function pointers and
remove the special tail call cc on x86-64.
llvm-svn: 73233
on x86 to handle more cases. Fix a bug in said code that would cause it
to read past the end of an object. Rewrite the code in
SelectionDAGLegalize::ExpandBUILD_VECTOR to be a bit more general.
Remove PerformBuildVectorCombine, which is no longer necessary with
these changes. In addition to simplifying the code, with this change,
we can now catch a few more cases of consecutive loads.
llvm-svn: 73012
nodes for vectors with an i16 element type. Add an optimization for
building a vector which is all zeros/undef except for the bottom
element, where the bottom element is an i8 or i16.
llvm-svn: 72988
build vectors with i64 elements will only appear on 32b x86 before legalize.
Since vector widening occurs during legalize, and produces i64 build_vector
elements, the dag combiner is never run on these before legalize splits them
into 32b elements.
Teach the build_vector dag combine in x86 back end to recognize consecutive
loads producing the low part of the vector.
Convert the two uses of TLI's consecutive load recognizer to pass LoadSDNodes
since that was required implicitly.
Add a testcase for the transform.
Old:
subl $28, %esp
movl 32(%esp), %eax
movl 4(%eax), %ecx
movl %ecx, 4(%esp)
movl (%eax), %eax
movl %eax, (%esp)
movaps (%esp), %xmm0
pmovzxwd %xmm0, %xmm0
movl 36(%esp), %eax
movaps %xmm0, (%eax)
addl $28, %esp
ret
New:
movl 4(%esp), %eax
pmovzxwd (%eax), %xmm0
movl 8(%esp), %eax
movaps %xmm0, (%eax)
ret
llvm-svn: 72957
integer and floating-point opcodes, introducing
FAdd, FSub, and FMul.
For now, the AsmParser, BitcodeReader, and IRBuilder all preserve
backwards compatability, and the Core LLVM APIs preserve backwards
compatibility for IR producers. Most front-ends won't need to change
immediately.
This implements the first step of the plan outlined here:
http://nondot.org/sabre/LLVMNotes/IntegerOverflow.txt
llvm-svn: 72897
Update code generator to use this attribute and remove DisableRedZone target option.
Update llc to set this attribute when -disable-red-zone command line option is used.
llvm-svn: 72894
e.g.
orl $65536, 8(%rax)
=>
orb $1, 10(%rax)
Since narrowing is not always a win, e.g. i32 -> i16 is a loss on x86, dag combiner consults with the target before performing the optimization.
llvm-svn: 72507
The DAGCombiner created a negative shiftamount, stored in an
unsigned variable. Later the optimizer eliminated the shift entirely as being
undefined.
Example: (srl (shl X, 56) 48). ShiftAmt is 4294967288.
Fix it by checking that the shiftamount is positive, and storing in a signed
variable.
llvm-svn: 72331
and it wasn't generating calls through @PLT for these functions.
hasLocalLinkage() is now false for available_externally,
I attempted to fix the inliner and dce to handle available_externally properly.
It passed make check.
llvm-svn: 72328
code in preparation for code generation. The main thing it does
is handle the case when eh.exception calls (and, in a future
patch, eh.selector calls) are far away from landing pads. Right
now in practice you only find eh.exception calls close to landing
pads: either in a landing pad (the common case) or in a landing
pad successor, due to loop passes shifting them about. However
future exception handling improvements will result in calls far
from landing pads:
(1) Inlining of rewinds. Consider the following case:
In function @f:
...
invoke @g to label %normal unwind label %unwinds
...
unwinds:
%ex = call i8* @llvm.eh.exception()
...
In function @g:
...
invoke @something to label %continue unwind label %handler
...
handler:
%ex = call i8* @llvm.eh.exception()
... perform cleanups ...
"rethrow exception"
Now inline @g into @f. Currently this is turned into:
In function @f:
...
invoke @something to label %continue unwind label %handler
...
handler:
%ex = call i8* @llvm.eh.exception()
... perform cleanups ...
invoke "rethrow exception" to label %normal unwind label %unwinds
unwinds:
%ex = call i8* @llvm.eh.exception()
...
However we would like to simplify invoke of "rethrow exception" into
a branch to the %unwinds label. Then %unwinds is no longer a landing
pad, and the eh.exception call there is then far away from any landing
pads.
(2) Using the unwind instruction for cleanups.
It would be nice to have codegen handle the following case:
invoke @something to label %continue unwind label %run_cleanups
...
handler:
... perform cleanups ...
unwind
This requires turning "unwind" into a library call, which
necessarily takes a pointer to the exception as an argument
(this patch also does this unwind lowering). But that means
you are using eh.exception again far from a landing pad.
(3) Bugpoint simplifications. When bugpoint is simplifying
exception handling code it often generates eh.exception calls
far from a landing pad, which then causes codegen to assert.
Bugpoint then latches on to this assertion and loses sight
of the original problem.
Note that it is currently rare for this pass to actually do
anything. And in fact it normally shouldn't do anything at
all given the code coming out of llvm-gcc! But it does fire
a few times in the testsuite. As far as I can see this is
almost always due to the LoopStrengthReduce codegen pass
introducing pointless loop preheader blocks which are landing
pads and only contain a branch to another block. This other
block contains an eh.exception call. So probably by tweaking
LoopStrengthReduce a bit this can be avoided.
llvm-svn: 72276
build an integer and cast that to a float. This fixes a crash
caused by trying to split an f32 into two f16's.
This changes the behavior in test/CodeGen/XCore/fneg.ll because that
testcase now triggers a DAGCombine which converts the fneg into an integer
operation. If someone is interested, it's probably possible to tweak
the test to generate an actual fneg.
llvm-svn: 72162
When a test fails with more than a pipeful of output on stdout AND stderr, one
of the DejaGnu programs blocks. The problem can be avoided by redirecting
stdout to a file.
llvm-svn: 71919
after finding the (unique) layout predecessor. Sometimes a block may be listed
more than once, and processing it more than once in this loop can lead to
inconsistent values for FtTBB/FtFBB, since the AnalyzeBranch method does not
clear these values. There's no point in continuing the loop regardless.
The testcase for this is reduced from the 2003-05-02-DependentPHI SingleSource
test.
llvm-svn: 71536
and generalize it so that it can be used by IndVarSimplify. Implement the
base IndVarSimplify transformation code using IVUsers. This removes
TestOrigIVForWrap and associated code, as ScalarEvolution now has enough
builtin overflow detection and folding logic to handle all the same cases,
and more. Run "opt -iv-users -analyze -disable-output" on your favorite
loop for an example of what IVUsers does.
This lets IndVarSimplify eliminate IV casts and compute trip counts in
more cases. Also, this happens to finally fix the remaining testcases
in PR1301.
Now that IndVarSimplify is being more aggressive, it occasionally runs
into the problem where ScalarEvolutionExpander's code for avoiding
duplicate expansions makes it difficult to ensure that all expanded
instructions dominate all the instructions that will use them. As a
temporary measure, IndVarSimplify now uses a FixUsesBeforeDefs function
to fix up instructions inserted by SCEVExpander. Fortunately, this code
is contained, and can be easily removed once a more comprehensive
solution is available.
llvm-svn: 71535
type, rather than assume that it does. If the operand is not vector, it
shouldn't be run through ScalarizeVectorOp. This fixes one of the
testcases in PR3886.
llvm-svn: 71453
scavenger gets confused about register liveness if it doesn't see them.
I'm not thrilled with this solution, but it only comes up when there are dead
copies in the code, which is something that hopefully doesn't happen much.
Here is what happens in pr4100: As shown in the following excerpt from the
debug output of llc, the source of a move gets reloaded from the stack,
inserting a new load instruction before the move. Since that source operand
is a kill, the physical register is free to be reused for the destination
of the move. The move ends up being a no-op, copying R3 to R3, so it is
deleted. But, it leaves behind the load to reload %reg1028 into R3, and
that load is not updated to show that it's destination operand (R3) is dead.
The scavenger gets confused by that load because it thinks that R3 is live.
Starting RegAlloc of: %reg1025<def,dead> = MOVr %reg1028<kill>, 14, %reg0, %reg0
Regs have values:
Reloading %reg1028 into R3
Last use of R3[%reg1028], removing it from live set
Assigning R3 to %reg1025
Register R3 [%reg1025] is never used, removing it from live set
Alternative solutions might be either marking the load as dead, or zapping
the load along with the no-op copy. I couldn't see an easy way to do
either of those, though.
llvm-svn: 71196
allow it to have multiple CFG edges to that block. This is needed
to allow MachineBasicBlock::isOnlyReachableByFallthrough to work
correctly. This fixes PR4126.
llvm-svn: 71018
of returning a list of pointers to Values that are deleted. This was
unsafe, because the pointers in the list are, by nature of what
RecursivelyDeleteDeadInstructions does, always dangling. Replace this
with a simple callback mechanism. This may eventually be removed if
all clients can reasonably be expected to use CallbackVH.
Use this to factor out the dead-phi-cycle-elimination code from LSR
utility function, and generalize it to use the
RecursivelyDeleteTriviallyDeadInstructions utility function.
This makes LSR more aggressive about eliminating dead PHI cycles;
adjust tests to either be less trivial or to simply expect fewer
instructions.
llvm-svn: 70636
memory operands otherwise the writebacks get lost when the inline asm
doesn't otherwise have side effects. This fixes rdar://6839427, though
clang really shouldn't generate these anymore.
llvm-svn: 70455
anything larger than 64-bits, avoiding a crash. This should
really be fixed to use APInts, though type legalization happens
to help us out and we get good code on the attached testcase at
least.
This fixes rdar://6836460
llvm-svn: 70360
Massive check in. This changes the "-fast" flag to "-O#" in llc. If you want to
use the old behavior, the flag is -O0. This change allows for finer-grained
control over which optimizations are run at different -O levels.
Most of this work was pretty mechanical. The majority of the fixes came from
verifying that a "fast" variable wasn't used anymore. The JIT still uses a
"Fast" flag. I'll change the JIT with a follow-up patch.
llvm-svn: 70343
use the old behavior, the flag is -O0. This change allows for finer-grained
control over which optimizations are run at different -O levels.
Most of this work was pretty mechanical. The majority of the fixes came from
verifying that a "fast" variable wasn't used anymore. The JIT still uses a
"Fast" flag. I'm not 100% sure if it's necessary to change it there...
llvm-svn: 70270
information to simplify [sz]ext({a,+,b}) to {zext(a),+,[zs]ext(b)},
as appropriate.
These functions and the trip count code each call into the other, so
this requires careful handling to avoid infinite recursion. During
the initial trip count computation, conservative SCEVs are used,
which are subsequently discarded once the trip count is actually
known.
Among other benefits, this change lets LSR automatically eliminate
some unnecessary zext-inreg and sext-inreg operation where the
operand is an induction variable.
llvm-svn: 70241
PR2957
ISD::VECTOR_SHUFFLE now stores an array of integers representing the shuffle
mask internal to the node, rather than taking a BUILD_VECTOR of ConstantSDNodes
as the shuffle mask. A value of -1 represents UNDEF.
In addition to eliminating the creation of illegal BUILD_VECTORS just to
represent shuffle masks, we are better about canonicalizing the shuffle mask,
resulting in substantially better code for some classes of shuffles.
llvm-svn: 70225
This particular one is undefined behavior (although this
isn't related to the crash), so it will no longer do it
at compile time, which seems better.
llvm-svn: 69990
ISD::VECTOR_SHUFFLE now stores an array of integers representing the shuffle
mask internal to the node, rather than taking a BUILD_VECTOR of ConstantSDNodes
as the shuffle mask. A value of -1 represents UNDEF.
In addition to eliminating the creation of illegal BUILD_VECTORS just to
represent shuffle masks, we are better about canonicalizing the shuffle mask,
resulting in substantially better code for some classes of shuffles.
A clean up of x86 shuffle code, and some canonicalizing in DAGCombiner is next.
llvm-svn: 69952
This fixes a very subtle bug. vr defined by an implicit_def is allowed overlap with any register since it doesn't actually modify anything. However, if it's used as a two-address use, its live range can be extended and it can be spilled. The spiller must take care not to emit a reload for the vn number that's defined by the implicit_def. This is both a correctness and performance issue.
llvm-svn: 69743
%reg1498<def> = MOV32rm %reg1024, 1, %reg0, 12, %reg0, Mem:LD(4,4) [sunkaddr39 + 0]
%reg1506<def> = MOV32rm %reg1024, 1, %reg0, 8, %reg0, Mem:LD(4,4) [sunkaddr42 + 0]
%reg1486<def> = MOV32rr %reg1506
%reg1486<def> = XOR32rr %reg1486, %reg1498, %EFLAGS<imp-def,dead>
%reg1510<def> = MOV32rm %reg1024, 1, %reg0, 4, %reg0, Mem:LD(4,4) [sunkaddr45 + 0]
=>
%reg1498<def> = MOV32rm %reg2036, 1, %reg0, 12, %reg0, Mem:LD(4,4) [sunkaddr39 + 0]
%reg1506<def> = MOV32rm %reg2037, 1, %reg0, 8, %reg0, Mem:LD(4,4) [sunkaddr42 + 0]
%reg1486<def> = MOV32rr %reg1506
%reg1486<def> = XOR32rr %reg1486, %reg1498, %EFLAGS<imp-def,dead>
%reg1510<def> = MOV32rm %reg2038, 1, %reg0, 4, %reg0, Mem:LD(4,4) [sunkaddr45 + 0]
From linearscan's point of view, each of reg2036, 2037, and 2038 are separate registers, each is "killed" after a single use. The reloaded register is available and it's often clobbered right away. e.g. In thise case reg1498 is allocated EAX while reg2036 is allocated RAX. This means we end up with multiple reloads from the same stack slot in the same basic block.
Now linearscan recognize there are other reloads from same SS in the same BB. So it'll "downgrade" RAX (and its aliases) after reg2036 is allocated until the next reload (reg2037) is done. This greatly increase the likihood reloads from SS are reused.
This speeds up sha1 from OpenSSL by 5.8%. It is also an across the board win for SPEC2000 and 2006.
llvm-svn: 69585
type as the vector element type: allow them to be of
a wider integer type than the element type all the way
through the system, and not just as far as LegalizeDAG.
This should be safe because it used to be this way
(the old type legalizer would produce such nodes), so
backends should be able to handle it. In fact only
targets which have legal vector types with an illegal
promoted element type will ever see this (eg: <4 x i16>
on ppc). This fixes a regression with the new type
legalizer (vec_splat.ll). Also, treat SCALAR_TO_VECTOR
the same as BUILD_VECTOR. After all, it is just a
special case of BUILD_VECTOR.
llvm-svn: 69467
for the optimization it's testing to kick in (although
it improves the code, getting rid of all spills).
I don't understand the optimization well enough to
rescue the test, so XFAILing.
llvm-svn: 69409
leaq foo@TLSGD(%rip), %rdi
as part of the instruction sequence. Using a register other than %rdi and then
copying it to %rdi is not valid.
llvm-svn: 69350
register is available and when it's profitable.
e.g.
xorq %r12<kill>, %r13
addq %rax, -184(%rbp)
addq %r13, -184(%rbp)
==>
xorq %r12<kill>, %r13
movq -184(%rbp), %r12
addq %rax, %r12
addq %r13, %r12
movq %r12, -184(%rbp)
Two more instructions, but fewer memory accesses. It can also open up
opportunities for more optimizations.
llvm-svn: 69341
have pointer types, though in contrast to C pointer types, SCEV
addition is never implicitly scaled. This not only eliminates the
need for special code like IndVars' EliminatePointerRecurrence
and LSR's own GEP expansion code, it also does a better job because
it lets the normal optimizations handle pointer expressions just
like integer expressions.
Also, since LLVM IR GEPs can't directly index into multi-dimensional
VLAs, moving the GEP analysis out of client code and into the SCEV
framework makes it easier for clients to handle multi-dimensional
VLAs the same way as other arrays.
Some existing regression tests show improved optimization.
test/CodeGen/ARM/2007-03-13-InstrSched.ll in particular improved to
the point where if-conversion started kicking in; I turned it off
for this test to preserve the intent of the test.
llvm-svn: 69258
operator is used by a CopyToReg to export the value to a different
block, don't reuse the CopyToReg's register for the subreg operation
result if the register isn't precisely the right class for the
subreg operation.
Also, rename the h-registers.ll test, now that there are more
than one.
llvm-svn: 69087
- Add patterns for h-register extract, which avoids a shift and mask,
and in some cases a temporary register.
- Add address-mode matching for turning (X>>(8-n))&(255<<n), where
n is a valid address-mode scale value, into an h-register extract
and a scaled-offset address.
- Replace X86's MOV32to32_ and related instructions with the new
target-independent COPY_TO_SUBREG instruction.
On x86-64 there are complicated constraints on h registers, and
CodeGen doesn't currently provide a high-level way to express all of them,
so they are handled with a bunch of special code. This code currently only
supports extracts where the result is used by a zero-extend or a store,
though these are fairly common.
These transformations are not always beneficial; since there are only
4 h registers, they sometimes require extra move instructions, and
this sometimes increases register pressure because it can force out
values that would otherwise be in one of those registers. However,
this appears to be relatively uncommon.
llvm-svn: 68962
to support C99 inline, GNU extern inline, etc. Related bugzilla's
include PR3517, PR3100, & PR2933. Nothing uses this yet, but it
appears to work.
llvm-svn: 68940
1. Sinking would crash when the first instruction of a block was
sunk due to iterator problems.
2. Instructions could be sunk to their current block, causing an
infinite loop.
This fixes PR3968
llvm-svn: 68787
register destinations that are tied to source operands. The
TargetInstrDescr::findTiedToSrcOperand method silently fails for inline
assembly. The existing MachineInstr::isRegReDefinedByTwoAddr was very
close to doing what is needed, so this revision makes a few changes to
that method and also renames it to isRegTiedToUseOperand (for consistency
with the very similar isRegTiedToDefOperand and because it handles both
two-address instructions and inline assembly with tied registers).
llvm-svn: 68714
in addition to ZERO_EXTEND and SIGN_EXTEND. Fix a bug in the
way it checked for live-out values, and simplify the way it
find users by using SDNode::use_iterator's (relatively) new
features. Also, make it slightly more permissive on targets
with free truncates.
In SelectionDAGBuild, avoid creating ANY_EXTEND nodes that are
larger than necessary. If the target's SwitchAmountTy has
enough bits, use it. This exposes the truncate to optimization
early, enabling more optimizations.
llvm-svn: 68670
with SUBREG_TO_REG, teach SimpleRegisterCoalescing to coalesce
SUBREG_TO_REG instructions (which are similar to INSERT_SUBREG
instructions), and teach the DAGCombiner to take advantage of this on
targets which support it. This eliminates many redundant
zero-extension operations on x86-64.
This adds a new TargetLowering hook, isZExtFree. It's similar to
isTruncateFree, except it only applies to actual definitions, and not
no-op truncates which may not zero the high bits.
Also, this adds a new optimization to SimplifyDemandedBits: transform
operations like x+y into (zext (add (trunc x), (trunc y))) on targets
where all the casts are no-ops. In contexts where the high part of the
add is explicitly masked off, this allows the mask operation to be
eliminated. Fix the DAGCombiner to avoid undoing these transformations
to eliminate casts on targets where the casts are no-ops.
Also, this adds a new two-address lowering heuristic. Since
two-address lowering runs before coalescing, it helps to be able to
look through copies when deciding whether commuting and/or
three-address conversion are profitable.
Also, fix a bug in LiveInterval::MergeInClobberRanges. It didn't handle
the case that a clobber range extended both before and beyond an
existing live range. In that case, multiple live ranges need to be
added. This was exposed by the new subreg coalescing code.
Remove 2008-05-06-SpillerBug.ll. It was bugpoint-reduced, and the
spiller behavior it was looking for no longer occurrs with the new
instruction selection.
llvm-svn: 68576
builds.
--- Reverse-merging (from foreign repository) r68552 into '.':
U test/CodeGen/X86/tls8.ll
U test/CodeGen/X86/tls10.ll
U test/CodeGen/X86/tls2.ll
U test/CodeGen/X86/tls6.ll
U lib/Target/X86/X86Instr64bit.td
U lib/Target/X86/X86InstrSSE.td
U lib/Target/X86/X86InstrInfo.td
U lib/Target/X86/X86RegisterInfo.cpp
U lib/Target/X86/X86ISelLowering.cpp
U lib/Target/X86/X86CodeEmitter.cpp
U lib/Target/X86/X86FastISel.cpp
U lib/Target/X86/X86InstrInfo.h
U lib/Target/X86/X86ISelDAGToDAG.cpp
U lib/Target/X86/AsmPrinter/X86ATTAsmPrinter.cpp
U lib/Target/X86/AsmPrinter/X86IntelAsmPrinter.cpp
U lib/Target/X86/AsmPrinter/X86ATTAsmPrinter.h
U lib/Target/X86/AsmPrinter/X86IntelAsmPrinter.h
U lib/Target/X86/X86ISelLowering.h
U lib/Target/X86/X86InstrInfo.cpp
U lib/Target/X86/X86InstrBuilder.h
U lib/Target/X86/X86RegisterInfo.td
llvm-svn: 68560
This introduces a small regression on the generated code
quality in the case we are just computing addresses, not
loading values.
Will work on it and on X86-64 support.
llvm-svn: 68552
e.g.
%reg1024<def> = MOV r1
%reg1025<def> = ADD %reg1024, %reg1026
r0 = MOV %reg1025
If it's not possible / profitable to commute ADD, then turning ADD into a LEA saves a copy.
llvm-svn: 68065
x * 40
=>
shlq $3, %rdi
leaq (%rdi,%rdi,4), %rax
This has the added benefit of allowing more multiply to be folded into addressing mode. e.g.
a * 24 + b
=>
leaq (%rdi,%rdi,2), %rax
leaq (%rsi,%rax,8), %rax
llvm-svn: 67917
e.g. allocating for GR32, bh is not used, updating bl spill weight.
bl should get the same spill weight otherwise it will be choosen
as a spill candidate since spilling bh doesn't make ebx available.
This fix PR2866.
llvm-svn: 67574
same as a normal i80 {low64, high16} rather
than its own {high64, low16}. A depressing number
of places know about this; I think I got them all.
Bitcode readers and writers convert back to the old
form to avoid breaking compatibility.
llvm-svn: 67562
%RAX<def> = ...
%RAX<def> = SUBREG_TO_REG 0, %EAX:3<kill>, 3
The first def is defining RAX, not EAX so the top bits were not zero-extended.
llvm-svn: 67511
not safe in general because the immediate could be an arbitrary
value that does not fit in a 32-bit pcrel displacement.
Conservatively fall back to loading the value into a register
and calling through it.
We still do the optzn on X86-32.
llvm-svn: 67142
it is not APInt clean, but even when it is it needs to be evaluated carefully
to determine whether it is actually profitable.
This fixes a crash on PR3806
llvm-svn: 67134
size by the array amount as an i32 value instead of promoting from
i32 to i64 then doing the multiply. Not doing this broke wrap-around
assumptions that the optimizers (validly) made. The ultimate real
fix for this is to introduce i64 version of alloca and remove mallocinst.
This fixes PR3829
llvm-svn: 67093
vector shuffle mask. Forced the mask to be built using i32. Note: this will
be irrelevant once vector_shuffle no longer takes a build vector for the
shuffle mask.
llvm-svn: 67076
- Fix fabs, fneg for f32 and f64.
- Use BuildVectorSDNode.isConstantSplat, now that the functionality exists
- Continue to improve i64 constant lowering. Lower certain special constants
to the constant pool when they correspond to SPU's shufb instruction's
special mask values. This avoids the overhead of performing a shuffle on a
zero-filled vector just to get the special constant when the memory load
suffices.
llvm-svn: 67067
U test/CodeGen/X86/2009-03-13-PHIElimBug.ll
D test/CodeGen/X86/2009-03-16-PHIElimInLPad.ll
U lib/CodeGen/PHIElimination.cpp
r67049 was causing this failure:
Running /Volumes/Sandbox/Buildbot/llvm/full-llvm/build/llvm.src/test/CodeGen/X86/dg.exp ...
FAIL: /Volumes/Sandbox/Buildbot/llvm/full-llvm/build/llvm.src/test/CodeGen/X86/2009-03-13-PHIElimBug.ll for PR3784
Failed with exit(1) at line 1
while running: llvm-as < /Volumes/Sandbox/Buildbot/llvm/full-llvm/build/llvm.src/test/CodeGen/X86/2009-03-13-PHIElimBug.ll | llc -march=x86 | /usr/bin/grep -A 2 {call f} | /usr/bin/grep movl
child process exited abnormally
llvm-svn: 67051
how invokes are set up. The fix could be disturbed by
register copies coming after the EH_LABEL, and also didn't
behave quite right when it was the invoke result that
was used in a phi node. Also (see new testcase) fix
another phi elimination bug while there: register copies
in the landing pad need to come after the EH_LABEL, because
that's where execution branches to when unwinding. If they
come before the EH_LABEL then they will never be executed...
Also tweak the original testcase so it doesn't use a no-longer
existing counter.
The accumulated phi elimination changes fix two of seven Ada
testsuite failures that turned up after landing pad critical
edge splitting was turned off. So there's probably more to come.
llvm-svn: 67049
ptrtoint and inttoptr in X86FastISel. These casts aren't always
handled in the generic FastISel code because X86 sometimes needs
custom code to do truncation and zero-extension.
llvm-svn: 66988
by inserting explicit zero extensions where necessary. Included
is a testcase where SelectionDAG produces a virtual register
holding an i1 value which FastISel previously mistakenly assumed
to be zero-extended.
llvm-svn: 66941
1. ConstantPoolSDNode alignment field is log2 value of the alignment requirement. This is not consistent with other SDNode variants.
2. MachineConstantPool alignment field is also a log2 value.
3. However, some places are creating ConstantPoolSDNode with alignment value rather than log2 values. This creates entries with artificially large alignments, e.g. 256 for SSE vector values.
4. Constant pool entry offsets are computed when they are created. However, asm printer group them by sections. That means the offsets are no longer valid. However, asm printer uses them to determine size of padding between entries.
5. Asm printer uses expensive data structure multimap to track constant pool entries by sections.
6. Asm printer iterate over SmallPtrSet when it's emitting constant pool entries. This is non-deterministic.
Solutions:
1. ConstantPoolSDNode alignment field is changed to keep non-log2 value.
2. MachineConstantPool alignment field is also changed to keep non-log2 value.
3. Functions that create ConstantPool nodes are passing in non-log2 alignments.
4. MachineConstantPoolEntry no longer keeps an offset field. It's replaced with an alignment field. Offsets are not computed when constant pool entries are created. They are computed on the fly in asm printer and JIT.
5. Asm printer uses cheaper data structure to group constant pool entries.
6. Asm printer compute entry offsets after grouping is done.
7. Change JIT code to compute entry offsets on the fly.
llvm-svn: 66875
for i32/i64 expressions (we could also do i16 on cpus where
i16 lea is fast, but I didn't add this). On the example, we now
generate:
_test:
movl 4(%esp), %eax
cmpl $42, (%eax)
setl %al
movzbl %al, %eax
leal 4(%eax,%eax,8), %eax
ret
instead of:
_test:
movl 4(%esp), %eax
cmpl $41, (%eax)
movl $4, %ecx
movl $13, %eax
cmovg %ecx, %eax
ret
llvm-svn: 66869
operands can't both be fully folded at the same time. For example,
in the included testcase, a global variable is being added with
an add of two values. The global variable wants RIP-relative
addressing, so it can't share the address with another base
register, but it's still possible to fold the initial add.
llvm-svn: 66865
in the Ada testcase. Reverting this only covers up
the real problem, which is a nasty conceptual difficulty
in the phi elimination pass: when eliminating phi nodes
in landing pads, the register copies need to come before
the invoke, not at the end of the basic block which is
too late... See PR3784.
llvm-svn: 66826
related transformations out of target-specific dag combine into the
ARM backend. These were added by Evan in r37685 with no testcases
and only seems to help ARM (e.g. test/CodeGen/ARM/select_xform.ll).
Add some simple X86-specific (for now) DAG combines that turn things
like cond ? 8 : 0 -> (zext(cond) << 3). This happens frequently
with the recently added cp constant select optimization, but is a
very general xform. For example, we now compile the second example
in const-select.ll to:
_test:
movsd LCPI2_0, %xmm0
ucomisd 8(%esp), %xmm0
seta %al
movzbl %al, %eax
movl 4(%esp), %ecx
movsbl (%ecx,%eax,4), %eax
ret
instead of:
_test:
movl 4(%esp), %eax
leal 4(%eax), %ecx
movsd LCPI2_0, %xmm0
ucomisd 8(%esp), %xmm0
cmovbe %eax, %ecx
movsbl (%ecx), %eax
ret
This passes multisource and dejagnu.
llvm-svn: 66779
