predicates.
Also remove NEON2 since it's not really useful and it is confusing. If
NEON + VFP4 implies NEON2 but NEON2 doesn't imply NEON + VFP4, what does it
really mean?
rdar://10139676
llvm-svn: 154480
1. The new instruction itinerary entries are not properly described.
2. The asm parser can't handle vfms and vfnms.
3. There were no assembler, disassembler test cases.
4. HasNEON2 has the wrong assembler predicate.
rdar://10139676
llvm-svn: 154456
After register masks were introdruced to represent the call clobbers, it
is no longer necessary to have duplicate instruction for iOS.
llvm-svn: 154209
We had special instructions for iOS because r9 is call-clobbered, but
that is represented dynamically by the register mask operands now, so
there is no need for the pseudo-instructions.
llvm-svn: 154144
A MOVCCr instruction can be commuted by inverting the condition. This
can help reduce register pressure and remove unnecessary copies in some
cases.
<rdar://problem/11182914>
llvm-svn: 154033
In this update:
- I assumed neon2 does not imply vfpv4, but neon and vfpv4 imply neon2.
- I kept setting .fpu=neon-vfpv4 code attribute because that is what the
assembler understands.
Patch by Ana Pazos <apazos@codeaurora.org>
llvm-svn: 152036
the processor keeps a return addresses stack (RAS) which stores the address
and the instruction execution state of the instruction after a function-call
type branch instruction.
Calling a "noreturn" function with normal call instructions (e.g. bl) can
corrupt RAS and causes 100% return misprediction so LLVM should use a
unconditional branch instead. i.e.
mov lr, pc
b _foo
The "mov lr, pc" is issued in order to get proper backtrace.
rdar://8979299
llvm-svn: 151623
We on the linker to resolve calls to the appropriate BL/BLX instruction
to make interworking function correctly. It uses the symbol in the
relocation to do that, so we need to be careful about being too clever.
To enable this for ARM mode, split the BL/BLX fixup kind off from the
unconditional-branch fixups.
rdar://10927209
llvm-svn: 151571
I'll let the buildbots determine the compile time improvements from this
change, but 464.h264ref has 5% faster codegen at -O2.
This patch does cause some assembly changes. Branch folding can make
different decisions about calls with dead return values.
CriticalAntiDepBreaker may choose different registers because its
liveness tracking is affected. MachineCopyPropagation may sometimes
leave a dead copy behind.
llvm-svn: 151331
value is zero. Instead of a cmov + op, issue an conditional op instead. e.g.
cmp r9, r4
mov r4, #0
moveq r4, #1
orr lr, lr, r4
should be:
cmp r9, r4
orreq lr, lr, #1
That is, optimize (or x, (cmov 0, y, cond)) to (or.cond x, y). Similarly extend
this to xor as well as (and x, (cmov -1, y, cond)) => (and.cond x, y).
It's possible to extend this to ADD and SUB but I don't think they are common.
rdar://8659097
llvm-svn: 151224
"Although a Thumb2 instruction, the IT mnemonic shall be permitted in
ARM mode, and the condition verified to match the condition code(s)
on the following instruction(s)."
PR11853
llvm-svn: 148969
The QQ and QQQQ registers are not 'real', they are pseudo-registers used
to model some vld and vst instructions.
This makes the call clobber lists longer, but I intend to get rid of
those soon.
llvm-svn: 148151
My change r146949 added register clobbers to the eh_sjlj_dispatchsetup pseudo
instruction, but on Thumb1 some of those registers cannot be used. This
caused massive failures on the testsuite when compiling for Thumb1. While
fixing that, I noticed that the eh_sjlj_setjmp instruction has a "nofp"
variant, and I realized that dispatchsetup needs the same thing, so I have
added that as well.
llvm-svn: 147204
We used to rely on the *eh_sjlj_setjmp instructions to mark that a function
with setjmp/longjmp exception handling clobbers all the registers. But with
the recent reorganization of ARM EH, those eh_sjlj_setjmp instructions are
expanded away earlier, before PEI can see them to determine what registers to
save and restore. Mark the dispatchsetup instruction in the same way, since
that instruction cannot be expanded early. This also more accurately reflects
when the registers are clobbered.
llvm-svn: 146949
When 'cmp rn #imm' doesn't match due to the immediate not being representable,
but 'cmn rn, #-imm' does match, use the latter in place of the former, as
it's equivalent.
rdar://10552389
llvm-svn: 146567
When the immediate operand of an AND or BIC instruction isn't representable
in the immediate field of the instruction, but the bitwise negation of the
immediate is, assemble the instruction as the inverse operation instead
with the inverted immediate as the operand.
rdar://10550057
llvm-svn: 146283
The EmitBasePointerRecalculation function has 2 problems, one minor and one
fatal. The minor problem is that it inserts the code at the setjmp
instead of in the dispatch block. The fatal problem is that at the point
where this code runs, we don't know whether there will be a base pointer,
so the entire function is a no-op. The base pointer recalculation needs to
be handled as it was before, by inserting a pseudo instruction that gets
expanded late.
Most of the support for the old approach is still here, but it no longer
has any connection to the eh_sjlj_dispatchsetup intrinsic. Clean up the
parts related to the intrinsic and just generate the pseudo instruction
directly.
llvm-svn: 144781
Clean up the patterns, fix comments, and avoid confusing both tools
and coders. Note that the special adds/subs SelectionDAG nodes no
longer have the dummy cc_out operand.
llvm-svn: 142397
Use the custom inserter for the ARM setjmp intrinsics. Instead of creating the
SjLj dispatch table in IR, where it frequently violates serveral assumptions --
in particular assumptions made by the landingpad instruction about what can
branch to a landing pad and what cannot. Performing this in the back-end allows
us to violate these assumptions without the IR getting angry at us.
It also allows us to perform a small optimization. We can shove the address of
the dispatch's basic block into the function context and not have to add code
around the setjmp to check for the return value and jump to the dispatch.
Neat, huh?
<rdar://problem/10116753>
llvm-svn: 142294
Fill out the rest of the encoding information, update to properly mark
the LDC/STC instructions as predicable while the LDC2/STC2 instructions are
not, and adjust the parser accordingly.
llvm-svn: 141721
using llvm's public 'C' disassembler API now including annotations.
Hooked this up to Darwin's otool(1) so it can again print things like branch
targets for example this:
blx _puts
instead of this:
blx #-36
and includes support for annotations for branches to symbol stubs like:
bl 0x40 @ symbol stub for: _puts
and annotations for pc relative loads like this:
ldr r3, #8 @ literal pool for: Hello, world!
Also again can print the expression encoded in the Mach-O relocation entries for
things like this:
movt r0, :upper16:((_foo-_bar)+1234)
llvm-svn: 141129
Build on previous patches to successfully distinguish between an M-series and A/R-series MSR and MRS instruction. These take different mask names and have a *slightly* different opcode format.
Add decoder and disassembler tests.
Improvement on the previous patch - successfully distinguish between valid v6m and v7m masks (one is a subset of the other). The patch had to be edited slightly to apply to ToT.
llvm-svn: 140696
This is still a hack until we can teach tblgen to generate the
optional CPSR operand rather than an implicit CPSR def. But the
strangeness is now limited to the selection DAG. ADD/SUB MI's no
longer have implicit CPSR defs, nor do we allow flag setting variants
of these opcodes in machine code. There are several corner cases to
consider, and getting one wrong would previously lead to nasty
miscompilation. It's not the first time I've debugged one, so this
time I added enough verification to ensure it won't happen again.
llvm-svn: 140228
No functionality change. The hook makes it explicit which patterns
require "special" handling. i.e. it self-documents tblgen
deficiencies. I plan to add verification in ExpandISelPseudos and
Thumb2SizeReduce to catch any missing hasPostISelHooks. Otherwise it's
too fragile.
llvm-svn: 140160
Modified ARMISelLowering::AdjustInstrPostInstrSelection to handle the
full gamut of CPSR defs/uses including instructins whose "optional"
cc_out operand is not really optional. This allowed removal of the
hasPostISelHook to simplify the .td files and make the implementation
more robust.
Fixes rdar://10137436: sqlite3 miscompile
llvm-svn: 140134
Now the 'S' instructions, e.g. ADDS, treat S bit as optional operand as well.
Also fix isel hook to correctly set the optional operand.
rdar://10073745
llvm-svn: 139157
instructions are more aligned than the CPU requires, and adds some additional
directives, to follow in future patches. Patch by David Meyer!
llvm-svn: 139125
Add a instruction flag: hasPostISelHook which tells the pre-RA scheduler to
call a target hook to adjust the instruction. For ARM, this is used to
adjust instructions which may be setting the 's' flag. ADC, SBC, RSB, and RSC
instructions have implicit def of CPSR (required since it now uses CPSR physical
register dependency rather than "glue"). If the carry flag is used, then the
target hook will *fill in* the optional operand with CPSR. Otherwise, the hook
will remove the CPSR implicit def from the MachineInstr.
llvm-svn: 138810
register dependency (rather than glue them together). This is general
goodness as it gives scheduler more freedom. However it is motivated by
a nasty bug in isel.
When a i64 sub is expanded to subc + sube.
libcall #1
\
\ subc
\ / \
\ / \
\ / libcall #2
sube
If the libcalls are not serialized (i.e. both have chains which are dag
entry), legalizer can serialize them in arbitrary orders. If it's
unlucky, it can force libcall #2 before libcall #1 in the above case.
subc
|
libcall #2
|
libcall #1
|
sube
However since subc and sube are "glued" together, this ends up being a
cycle when the scheduler combine subc and sube as a single scheduling
unit.
The right solution is to fix LegalizeType too chains the libcalls together.
However, LegalizeType is not processing nodes in order so that's harder than
it should be. For now, the move to physical register dependency will do.
rdar://10019576
llvm-svn: 138791
I don't really like the patterns, but I'm having trouble coming up with a
better way to handle them.
I plan on making other targets use the same legalization
ARM-without-memory-barriers is using... it's not especially efficient, but
if anyone cares, it's not that hard to fix for a given target if there's
some better lowering.
llvm-svn: 138621
This new disassembler can correctly decode all the testcases that the old one did, though
some "expected failure" testcases are XFAIL'd for now because it is not (yet) as strict in
operand checking as the old one was.
llvm-svn: 137144
More parsing support for indexed loads. Fix pre-indexed with writeback
parsing for register offsets and handle basic post-indexed offsets.
llvm-svn: 136982
Refactor STR[B] pre and post indexed instructions to use addressing modes for
memory operands, which is necessary for assembly parsing and is more consistent
with the rest of the memory instruction definitions. Make some incremental
progress on refactoring away the mega-operand addrmode2 along the way, which
is nice.
llvm-svn: 136978
Memory operand parsing is a bit haphazzard at the moment, in no small part
due to the even more haphazzard representations of memory operands in the .td
files. Start cleaning that all up, at least a bit.
The addressing modes in the .td files will be being simplified to not be
so monolithic, especially with regards to immediate vs. register offsets
and post-indexed addressing. addrmode3 is on its way with this patch, for
example.
This patch is foundational to enable going back to smaller incremental patches
for the individual memory referencing instructions themselves. It does just
enough to get the basics in place and handle the "make check" regression tests
we already have.
Follow-up work will be fleshing out the details and adding more robust test
cases for the individual instructions, starting with ARM mode and moving from
there into Thumb and Thumb2.
llvm-svn: 136845
Fix the instruction encoding for operands. Refactor mode to use explicit
instruction definitions per FIXME to be more consistent with loads/stores.
Fix disassembler accordingly. Add tests.
llvm-svn: 136509
Fill in the missing fixed bits and the register operand bits of the instruction
encoding. Refactor the definition to make the mode explicit, which is
consistent with how loads and stores are normally represented and makes
parsing much easier. Add parsing aliases for pseudo-instruction variants.
Update the disassembler for the new representations. Add tests for parsing and
encoding.
llvm-svn: 136479
Add parsing support for BLX (immediate). Since the register operand version is
predicated and the label operand version is not, we have to use some special
handling to get the operand list right for matching.
llvm-svn: 136406
Add parsing support that handles converting the lsb+width source into the
odd way we represent the instruction (an inverted bitfield mask).
llvm-svn: 136399
Encode the width operand as it encodes in the instruction, which simplifies
the disassembler and the encoder, by using the imm1_32 operand def. Add a
diagnostic for the context-sensitive constraint that the width must be in
the range [1,32-lsb].
llvm-svn: 136264
Refactor the rest of the extend instructions to not artificially distinguish
between a rotate of zero and a rotate of any other value. Replace the by-zero
versions with Pat<>'s for ISel.
llvm-svn: 136226
Refactor the SXTB, SXTH, SXTB16, UXTB, UXTH, and UXTB16 instructions to not
have an 'r' and an 'r_rot' version, but just a single version with a rotate
that can be zero. Use plain Pat<>'s for the ISel of the non-rotated version.
llvm-svn: 136225
Allow the rot_imm operand to be optional. This sets the stage for refactoring
away the "rr" versions from the multiclasses and replacing them with Pat<>s.
llvm-svn: 136154
Start of cleaning this up a bit. First step is to remove the encoder hook by
storing the operand as the bits it'll actually encode to so it can just be
directly used. Map it to the assembly source values 8/16/24 when we print it.
llvm-svn: 136152
Fix the Rn register encoding for both SSAT and USAT. Update the parsing of the
shift operand to correctly handle the allowed shift types and immediate ranges
and issue meaningful diagnostics when an illegal value or shift type is
specified. Add aliases to parse an ommitted shift operand (default value of
'lsl #0').
Add tests for diagnostics and proper encoding.
llvm-svn: 135990
The shift immediate encoding, printing, etc. is handled directly by the
enclosing operand definition, so it should be a vanilla immediate, not a
nested complex operand (shift_imm).
llvm-svn: 135968
Remove some inititalizers that are the same as the default, move defs next to
their (singular) uses and generally simplify some formatting of asm operand
definitions.
llvm-svn: 135946
The immediate is in the range 1-32, but is encoded as 0-31 in a 5-bit bitfield.
Update the representation such that we store the operand as 0-31, allowing us
to remove the encoder method and the special case handling in the disassembler.
Update the assembly parser and the instruction printer accordingly.
llvm-svn: 135823
Aliases for LDM/STM. The single-register versions should encode to LDR/STR
with writeback, but we don't (yet) get that correct. Neither does Darwin's
system assembler, though, so that's not a deal-breaker of a limitation.
llvm-svn: 135702
Move the shift operator and special value (32 encoded as 0 for PKHTB) handling
into the instruction printer. This cleans up a bit of the disassembler
special casing for these instructions, more easily handles not printing the
operand at all for "lsl #0" and prepares for correct asm parsing of these
operands.
llvm-svn: 135626
Move common definitions for ARM and Thumb2 into ARMInstrFormats.td and rename
them to be a bit more descriptive that they're for the PKH instructions.
llvm-svn: 135617
The shift type is implied by the instruction (PKHBT vs. PKHTB) and so shouldn't
be also encoded as part of the shift value immediate. Otherwise we're able to
represent invalid instructions, plus it needlessly complicates the
representation. Preparatory work for asm parsing of these instructions.
llvm-svn: 135616
The system register spec should be case insensitive. The preferred form for
output with mask values of 4, 8, and 12 references APSR rather than CPSR.
Update and tidy up tests accordingly.
llvm-svn: 135532
Add range checking for the immediate operand and handle the "mov" mnemonic
choosing between encodings based on the value of the immediate. Add tests
for fixups, encoding choice and values, and diagnostic for out of range values.
llvm-svn: 135500
Consolidate the individual declarations together for ease of reference. This
mirrors the organization in X86, as well, so is good for consistency. No
functional change.
llvm-svn: 135179
Flesh out the options supported for the instruction. Shuffle tests a bit and
add entries for the rest of the options. Add an alias to handle the default
operand of "sy".
llvm-svn: 135109
Now works for parsing register shifted register and register shifted
immediate arithmetic instructions, including the 'rrx' rotate with extend.
llvm-svn: 135049
Print shifted immediate values directly rather than as a payload+shifter
value pair. This makes for more readable output assembly code, simplifies
the instruction printer, and is consistent with how Thumb immediates are
displayed.
llvm-svn: 134902
Hook up the TableGen lowering for simple pseudo instructions for ARM and
use it for a subset of the many pseudos the backend has as proof of concept.
More conversions to come.
llvm-svn: 134705
- Each target asm parser now creates its own MCSubtatgetInfo (if needed).
- Changed AssemblerPredicate to take subtarget features which tablegen uses
to generate asm matcher subtarget feature queries. e.g.
"ModeThumb,FeatureThumb2" is translated to
"(Bits & ModeThumb) != 0 && (Bits & FeatureThumb2) != 0".
llvm-svn: 134678
