If you have a long chain of select instructions created from something
like `int* p = &g; if (foo()) p += 4; if (foo2()) p += 4;` etc., a naive
recursive visitor will recursively visit each select twice, which is
O(2^N) in the number of select instructions. Use the visited set to cut
off recursion in this case.
(No testcase because this doesn't actually change the behavior, just the
time.)
Differential Revision: https://reviews.llvm.org/D42451
llvm-svn: 323910
Summary:
Call MRI.freezeReservedRegs() on functions created during outlining so
that calls to isReserved() by the verifier called after this pass won't
assert.
Reviewers: MatzeB, qcolombet, paquette
Subscribers: mcrosier, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D42749
llvm-svn: 323905
For now, we are not using wasm globals, except for modeling of
the stack points.
Alos, factor out common struct WasmGlobalType, which matches the
name for that tuple in the Wasm spec and rename methods
to "isBindingGlobal", "isTypeGlobal" to avoid ambiguity.
Patch by Nicholas Wilson!
Differential Revision: https://reviews.llvm.org/D42750
llvm-svn: 323901
This change is useful for the upcoming addition of the symbol
table (D41954) since in that world aliases for given function
all share the same function index.
This change does not effect lld because it essentially ignores
the wasm "table". The table exists only to the wasm objects
will validate and disassembly meaningfully.
Patch by Nicholas Wilson!
Differential Revision: https://reviews.llvm.org/D42095
llvm-svn: 323900
Summary:
This was introduced in D42646 but ended up being reverted because the original implementation was buggy.
Depends on D42646
Reviewers: craig.topper, niravd, spatel, hfinkel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D42741
llvm-svn: 323899
Since r322087, glibc's finite lib calls are generated when possible.
However, they are not supported on Android. This change also
disables other functions not available on Android.
Differential Revision: http://reviews.llvm.org/D42668
llvm-svn: 323898
Summary:
This change is part of step five in the series of changes to remove alignment argument from
memcpy/memmove/memset in favour of alignment attributes. In particular, this changes the
CodeGenPrepare pass to be more aggressive in improving the source and destination alignments
of memcpy/memmove/memset by exploiting our new ability to record independent alignments
for each argument.
Steps:
Step 1) Remove alignment parameter and create alignment parameter attributes for
memcpy/memmove/memset. ( rL322965, rC322964, rL322963 )
Step 2) Expand the IRBuilder API to allow creation of memcpy/memmove with differing
source and dest alignments. ( rL323597 )
Step 3) Update Clang to use the new IRBuilder API. ( rC323617 )
Step 4) Update Polly to use the new IRBuilder API. ( rL323618 )
Step 5) Update LLVM passes that create memcpy/memmove calls to use the new IRBuilder API,
and those that use use MemIntrinsicInst::[get|set]Alignment() to use [get|set]DestAlignment()
and [get|set]SourceAlignment() instead. ( rL323886 )
Step 6) Remove the single-alignment IRBuilder API for memcpy/memmove, and the
MemIntrinsicInst::[get|set]Alignment() methods.
Reference
http://lists.llvm.org/pipermail/llvm-dev/2015-August/089384.htmlhttp://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20151109/312083.html
llvm-svn: 323891
Summary:
It seems it's main effect is to create addition copies when values are inr register that do not support this trick, which increase register pressure and makes the code bigger.
Reviewers: craig.topper, niravd, spatel, hfinkel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D42646
llvm-svn: 323888
Selecting of constant HVX vectors involves some "manual processing",
which mishandled an unrelated BITCAST operation causing a selection
error.
llvm-svn: 323887
Summary:
This change is part of step five in the series of changes to remove alignment argument from
memcpy/memmove/memset in favour of alignment attributes. In particular, this changes the Lint
analysis to cease using the old getAlignment() API of MemoryIntrinsic in favour of getting
source & dest specific alignments through the new API.
Steps:
Step 1) Remove alignment parameter and create alignment parameter attributes for
memcpy/memmove/memset. ( rL322965, rC322964, rL322963 )
Step 2) Expand the IRBuilder API to allow creation of memcpy/memmove with differing
source and dest alignments. ( rL323597 )
Step 3) Update Clang to use the new IRBuilder API. ( rC323617 )
Step 4) Update Polly to use the new IRBuilder API. ( rL323618 )
Step 5) Update LLVM passes that create memcpy/memmove calls to use the new IRBuilder API,
and those that use use MemIntrinsicInst::[get|set]Alignment() to use [get|set]DestAlignment()
and [get|set]SourceAlignment() instead.
Step 6) Remove the single-alignment IRBuilder API for memcpy/memmove, and the
MemIntrinsicInst::[get|set]Alignment() methods.
Reference
http://lists.llvm.org/pipermail/llvm-dev/2015-August/089384.htmlhttp://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20151109/312083.html
llvm-svn: 323886
This commit came as a result for revert of patch r317579 (originally
committed as r317100). The patch made CFI instructions duplicable, because
their existence in the epilogue block was affecting the Tail duplication
pass. However, duplicating blocks with CFI instructions was an issue for
compact unwind info on Darwin, which is why the patch was reverted.
This patch allows duplicating tails with CFI instructions, though they are
not duplicable, by copying them 'manually'.
Patch by Djordje Kovacevic.
Differential Revision: https://reviews.llvm.org/D40979
llvm-svn: 323883
Summary:
Instruction Selection preserves relative orders of all nodes save
TokenFactors which we treat specially. As a result Node Ids for
TokenFactors may violate the topological ordering and should not be
considered as valid pruning candidates in predecessor search.
Fixes PR35316.
Reviewers: RKSimon, hfinkel
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D42701
llvm-svn: 323880
Start using the new LegalizerInfo API introduced in r323681.
Keep the old API for opcodes that need Lowering in some circumstances
(G_FNEG and G_UREM/G_SREM).
llvm-svn: 323876
In D41587, @mssimpso discovered that the order of some patterns for
AArch64 was sub-optimal. I thought a bit about how we could avoid that
case in the future. I do not think there is a need for evaluating all
patterns for now. But this patch adds an extra (expensive) check, that
evaluates the latencies of all patterns, and ensures that the latency
saved decreases for subsequent patterns.
This catches the sub-optimal order fixed in D41587, but I am not
entirely happy with the check, as it only applies to sub-optimal
patterns seen while building with EXPENSIVE_CHECKS on. It did not
discover any other sub-optimal pattern ordering.
Reviewers: Gerolf, spatel, mssimpso
Reviewed By: Gerolf, mssimpso
Differential Revision: https://reviews.llvm.org/D41766
llvm-svn: 323873
When selecting a split candidate for region splitting, the register allocator tries to predict which candidate will have the cheapest spill cost.
Global splitting may cause the creation of local intervals, and they might spill.
This patch makes RA take into account the spill cost of local split intervals in use blocks (we already take into account the spill cost in through blocks).
A flag ("-condsider-local-interval-cost") controls weather we do this advanced cost calculation (it's on by default for X86 target, off for the rest).
Differential Revision: https://reviews.llvm.org/D41585
Change-Id: Icccb8ad2dbf13124f5d97a18c67d95aa6be0d14d
llvm-svn: 323870
Summary:
Expressions of the form x < 0 ? 0 : x; and x < -1 ? -1 : x can be lowered using bit-operations instead of branching or conditional moves
In thumb-mode this results in a two-instruction sequence, a shift followed by a bic or or while in ARM/thumb2 mode that has flexible second operand the shift can be folded into a single bic/or instructions. In most cases this results in smaller code and possibly less branches, and in no case larger than before.
Patch by Marten Svanfeldt.
Reviewers: fhahn, pbarrio
Reviewed By: pbarrio
Subscribers: efriedma, rogfer01, aemerson, javed.absar, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D42574
llvm-svn: 323869
Since these methods will assert if the integer does not fit into 64 bits,
it is necessary to do this check before calling them in
supportedAddressingMode().
Review: Ulrich Weigand.
llvm-svn: 323866
Because dead code may contain non-standard IR that causes infinite looping or crashes in underlying analysis.
See PR36134 for more details.
Differential Revision: https://reviews.llvm.org/D42683
llvm-svn: 323862
Half-precision arguments and return values are passed as if it were an int or
float for ARM. This results in truncates and bitcasts to/from i16 and f16
values, which are legalized very early to stack stores/loads. When FullFP16 is
enabled, we want to avoid codegen for these bitcasts as it is unnecessary and
inefficient.
Differential Revision: https://reviews.llvm.org/D42580
llvm-svn: 323861
Enable multiple COPY hints to eliminate more COPYs during register allocation.
Note that this is something all targets should do, see
https://reviews.llvm.org/D38128.
Review: Nemanja Ivanovic
llvm-svn: 323858
In Thumb 1, with the new ADDCARRY / SUBCARRY the scheduler may need to do
copies CPSR ↔ GPR but not all Thumb1 targets implement them.
The schedule can attempt, before attempting a copy, to clone the instructions
but it does not currently do that for nodes with input glue. In this patch we
introduce a target-hook to let the hook decide if a glued machinenode is still
eligible for copying. In this case these are ARM::tADCS and ARM::tSBCS .
As a follow-up of this change we should actually implement the copies for the
Thumb1 targets that do implement them and restrict the hook to the targets that
can't really do such copy as these clones are not ideal.
This change fixes PR35836.
Differential Revision: https://reviews.llvm.org/D42051
llvm-svn: 323857
These were introduced in r323783 and use an X86 triple. I'll follow up
on the list to check if it would make more sense to remove the triple
and mark them REQUIRES: default_triple instead.
llvm-svn: 323847
When a the Apple link editor builds a kext bundle file type and the
value of the -miphoneos-version-min argument is significantly current
(like 11.0) then the (__TEXT,__text) section is changed to the
(__TEXT_EXEC,__text) section. So it would be nice for llvm-nm to
show symbols in that section with a type of T instead of the generic
type of S for some section other than text, data, etc.
rdar://36262205
llvm-svn: 323836
"path" is too generic name for -L or --library-path because a lot of
linker options take paths as arguments. This change renames the option
to avoid confusion.
Differential Revision: https://reviews.llvm.org/D42705
llvm-svn: 323833
- If ReqdWorkGroupSize is present it must have all elements >=1.
- If MaxFlatWorkGroupSize must be consistent with ReqdWorkGroupSize.
- Remove FixedWorkGroupSize as now equivalent to ReqdWorkGroupSize.
llvm-svn: 323829
Sometimes users do not specify data layout in LLVM assembly and let llc set the
data layout by target triple after loading the LLVM assembly.
Currently the parser checks alloca address space no matter whether the LLVM
assembly contains data layout definition, which causes false alarm since the
default data layout does not contain the correct alloca address space.
The parser also calls verifier to check debug info and updating invalid debug
info. Currently there is no way to let the verifier to check debug info only.
If the verifier finds non-debug-info issues the parser will fail.
For llc, the fix is to remove the check of alloca addr space in the parser and
disable updating debug info, and defer the updating of debug info and
verification to be after setting data layout of the IR by target.
For other llvm tools, since they do not override data layout by target but
instead can override data layout by a command line option, an argument for
overriding data layout is added to the parser. In cases where data layout
overriding is necessary for the parser, the data layout can be provided by
command line.
Differential Revision: https://reviews.llvm.org/D41832
llvm-svn: 323826
