getConstantFP to accept the two supported long double
target types. This was not the original intent, but
there are other places that assume this works and it's
easy enough to do.
llvm-svn: 103299
handled cases where a block had zero predecessors, but failed to detect other
cases like loops with no entries. The SSAUpdater is already doing a forward
traversal through the blocks, so it is not hard to identify the blocks that
were never reached on that traversal. This fixes the crash for ppc on the
stepanov_vector test.
llvm-svn: 103184
Microoptimize Twine's with unsigned and int to not pin their value to
the stack. This saves stack space in common cases and allows mem2reg
in the caller. A simple example is:
void foo(const Twine &);
void bar(int x) {
foo("xyz: " + Twine(x));
}
Before:
__Z3bari:
subq $40, %rsp
movl %edi, 36(%rsp)
leaq L_.str3(%rip), %rax
leaq 36(%rsp), %rcx
leaq 8(%rsp), %rdi
movq %rax, 8(%rsp)
movq %rcx, 16(%rsp)
movb $3, 24(%rsp)
movb $7, 25(%rsp)
callq __Z3fooRKN4llvm5TwineE
addq $40, %rsp
ret
After:
__Z3bari:
subq $24, %rsp
leaq L_.str3(%rip), %rax
movq %rax, (%rsp)
movslq %edi, %rax
movq %rax, 8(%rsp)
movb $3, 16(%rsp)
movb $7, 17(%rsp)
leaq (%rsp), %rdi
callq __Z3fooRKN4llvm5TwineE
addq $24, %rsp
ret
It saves 16 bytes of stack and one instruction in this case.
llvm-svn: 103107
sub-register indices and outputs a single super register which is formed from
a consecutive sequence of registers.
This is used as register allocation / coalescing aid and it is useful to
represent instructions that output register pairs / quads. For example,
v1024, v1025 = vload <address>
where v1024 and v1025 forms a register pair.
This really should be modelled as
v1024<3>, v1025<4> = vload <address>
but it would violate SSA property before register allocation is done.
Currently we use insert_subreg to form the super register:
v1026 = implicit_def
v1027 - insert_subreg v1026, v1024, 3
v1028 = insert_subreg v1027, v1025, 4
...
= use v1024
= use v1028
But this adds pseudo live interval overlap between v1024 and v1025.
We can now modeled it as
v1024, v1025 = vload <address>
v1026 = REG_SEQUENCE v1024, 3, v1025, 4
...
= use v1024
= use v1026
After coalescing, it will be
v1026<3>, v1025<4> = vload <address>
...
= use v1026<3>
= use v1026
llvm-svn: 102815
Limit alignment in SmallVector 8, otherwise GCC assumes 16 byte alignment.
opetaror new, and malloc only return 8-byte aligned memory on 32-bit Linux,
which cause a crash if code is compiled with -O3 (or -ftree-vectorize) and some
SmallVector code is vectorized.
llvm-svn: 102604
add a version of createLowerInvokePass that allows the client
to specify whether it wants "expensive" or "cheap" lowering.
Patch by Alex Mac!
llvm-svn: 102402
otherwise labels get incorrectly merged. We handled this by emitting a
".byte 0", but this isn't correct on thumb/arm targets where the text segment
needs to be a multiple of 2/4 bytes. Handle this by emitting a noop. This
is more gross than it should be because arm/ppc are not fully mc'ized yet.
This fixes rdar://7908505
llvm-svn: 102400
form of DEBUG_VALUE, as it doesn't have reasonable default
behavior for unsupported targets. Add a new hook instead.
No functional change.
llvm-svn: 102320
This fixes a bug where calls inlined into an invoke would get
changed into an invoke but the array would keep pointing to
the (now dead) call. The improved inliner behavior is still
disabled for now.
llvm-svn: 102196
that appear in the SCC as a result of inlining as candidates
for inlining. Change this so that it *does* consider call
sites that change from being indirect to being direct as a
result of inlining. This allows it to completely
"devirtualize" the testcase.
llvm-svn: 102146
arguments are handled with a new InlineFunctionInfo class. This
makes it easier to extend InlineFunction to return more info in the
future.
llvm-svn: 102137
So far this is just a clone of -regalloc=local that has been lobotomized to run
25% faster. It drops the least-recently-used calculations, and is just plain
stupid when it runs out of registers.
The plan is to make this go even faster for -O0 by taking advantage of the short
live intervals in unoptimized code. It should not be necessary to calculate
liveness when most virtual registers are killed 2-3 instructions after they are
born.
llvm-svn: 102006
user-defined operations that use MMX register types, but
the compiler shouldn't generate them on its own. This adds
a Synthesizable abstraction to represent this, and changes
the vector widening computation so it won't produce MMX types.
(The motivation is to remove noise from the ABI compatibility
part of the gcc test suite, which has some breakage right now.)
llvm-svn: 101951
just ask ScalarEvolution for it on demand. This helps IVUsers be more robust
in the case of expressions changing underneath it. This fixes PR6862.
llvm-svn: 101819
const_casts, and it reinforces the design of the Target classes being
immutable.
SelectionDAGISel::IsLegalToFold is now a static member function, because
PIC16 uses it in an unconventional way. There is more room for API
cleanup here.
And PIC16's AsmPrinter no longer uses TargetLowering.
llvm-svn: 101635
CGSCC can delete nodes in regions of the callgraph that
have already been visited. If new CG nodes are allocated
to the same pointer, we shouldn't abort, just handle it
correctly by assigning a new number. This should restore
stability by removing invalidated pointers that *will* be
reused from the densemap in the iterator.
llvm-svn: 101628
to determine where to place PHIs by iteratively comparing reaching definitions
at each block. That was just plain wrong. This version now computes the
dominator tree within the subset of the CFG where PHIs may need to be placed,
and then places the PHIs in the iterated dominance frontier of each definition.
The rest of the patch is mostly the same, with a few more performance
improvements added in.
llvm-svn: 101612
to keep the node entries in scc_iterator up to date instead of dangling as
the SCC mutates.
This is a really terrible problem which was causing -g to affect codegen
because it would permute the memory image of the compiler process.
Thanks to Dale for expertly hunting it down.
llvm-svn: 101565
to CallGraphSCCPass's instead of passing around a
std::vector<CallGraphNode*>. No functionality change,
but now we have a much tidier interface.
llvm-svn: 101558
with a fix for self-hosting
rotate CallInst operands, i.e. move callee to the back
of the operand array
the motivation for this patch are laid out in my mail to llvm-commits:
more efficient access to operands and callee, faster callgraph-construction,
smaller compiler binary
llvm-svn: 101465
JIT doesn't use the MC back-end asm printer to emit labels that it uses, the
section for the MCSymbol is never set. And thus the MCSymbol for the EH label
isn't marked as "defined". Because of that, TidyLandingPads removes the needed
landing pads from the JIT output. This breaks EH for every JIT program.
This is a work-around for this limitation. We pass in the label locations
map. If the label has a non-zero value, then it was "emitted" by the JIT and
TidyLandingPads shouldn't remove that label.
A nicer solution would be to mark the MCSymbol as "used" by the JIT and not rely
upon the section being set to determine if it's defined or not.
llvm-svn: 101453
with a fix
rotate CallInst operands, i.e. move callee to the back
of the operand array
the motivation for this patch are laid out in my mail to llvm-commits:
more efficient access to operands and callee, faster callgraph-construction,
smaller compiler binary
llvm-svn: 101397
of the operand array
the motivation for this patch are laid out in my mail to llvm-commits:
more efficient access to operands and callee, faster callgraph-construction,
smaller compiler binary
llvm-svn: 101364
current PC. rdar://7834775
We now produce an identical .o file compared to the cctools
assembler for something like this:
_f0:
L0:
jmp L1
.long . - L0
L1:
jmp A
.long . - L1
.zerofill __DATA,_bss,A,0
llvm-svn: 101227
code. It used to #include the enhanced disassembly
information for the targets it supported straight
out of lib/Target/{X86,ARM,...} but now it uses a
new interface provided by MCDisassembler, and (so
far) implemented by X86 and ARM.
Also removed hacky #define-controlled initialization
of targets in edis. If clients only want edis to
initialize a limited set of targets, they can set
--enable-targets on the configure command line.
llvm-svn: 101179
MachineBasicBlock::livein_iterator a const_iterator, because
clients shouldn't ever be using the iterator interface to
mutate the livein set.
llvm-svn: 101147
I also added a rule to the ARM target's Makefile to
build the ARM-specific instruction information table
for the enhanced disassembler.
I will add the test harness for all this stuff in
a separate commit.
llvm-svn: 100735
and use it in one place in inline asm handling stuff. Before
we'd generate this for an invalid modifier letter:
$ clang asm.c -c -o t.o
fatal error: error in backend: Invalid operand found in inline asm: 'abc incl ${0:Z}'
INLINEASM <es:abc incl ${0:Z}>, 10, %EAX<def>, 2147483657, %EAX, 14, %EFLAGS<earlyclobber,def,dead>, <!-1>
Now we generate this:
$ clang asm.c -c -o t.o
error: invalid operand in inline asm: 'incl ${0:Z}'
asm.c:3:12: note: generated from here
__asm__ ("incl %Z0" : "+r" (X));
^
1 error generated.
This is much better but still admittedly not great ("why" is the operand
invalid??), codegen should try harder with its diagnostics :)
llvm-svn: 100723
explicitly split into stride-and-offset pairs. Also, add the
ability to track multiple post-increment loops on the same expression.
This refines the concept of "normalizing" SCEV expressions used for
to post-increment uses, and introduces a dedicated utility routine for
normalizing and denormalizing expressions.
This fixes the expansion of expressions which are post-increment users
of more than one loop at a time. More broadly, this takes LSR another
step closer to being able to reason about more than one loop at a time.
llvm-svn: 100699
1. Introduce some enums and accessors in the InlineAsm class
that eliminate a ton of magic numbers when handling inline
asm SDNode.
2. Add a new MDNodeSDNode selection dag node type that holds
a MDNode (shocking!)
3. Add a new argument to ISD::INLINEASM nodes that hold !srcloc
metadata, propagating it to the instruction emitter, which
drops it.
No functionality change.
llvm-svn: 100605
