As discussed in
http://lists.llvm.org/pipermail/llvm-dev/2020-July/143801.html.
Currently no users outside of unit tests.
Replace all instances in tests of -constprop with -instsimplify.
Notable changes in tests:
* vscale.ll - @llvm.sadd.sat.nxv16i8 is evaluated by instsimplify, use a fake intrinsic instead
* InsertElement.ll - insertelement undef is removed by instsimplify in @insertelement_undef
llvm/test/Transforms/ConstProp moved to llvm/test/Transforms/InstSimplify/ConstProp
Reviewed By: lattner, nikic
Differential Revision: https://reviews.llvm.org/D85159
Summary:
When looking for all reaching definitions, we sort basic blocks on dominance. When sorting looking for properlyDominates() handles the case A == B.
Authored by: pranavb
Differential Revision: https://reviews.llvm.org/D86661
As discussed in D86576, noundef attribute is removed from masked store/load/gather/scatter's
pointer operands.
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D86656
According to the current LangRef, Memset/memcpy/memmove can take a
null/dangling pointer if the size is zero.
(Relevant thread: http://lists.llvm.org/pipermail/llvm-dev/2017-July/115665.html )
This patch expands it and allows the functions to take undef/poison pointers
too.
This required the updates in the align attribute since it isn't specified
what is the alignment of undef/poison pointers.
This patch states that their alignment is 1.
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D86643
This is a reboot of D84655, now performing the inner icmp
simplification query without undef folds.
It should be possible to handle the current foldMinMaxSharedOp()
fold based on this, by moving the logic into icmp of min/max instead,
making it more general. We can't drop the folds for constant operands,
because those also allow undef, which we exclude here.
The tests use assumes for exhaustive coverage, and have a few
more examples of misc folds we get based on icmp simplification.
Differential Revision: https://reviews.llvm.org/D85929
Original Commit Message:
After the commit r368987 (rG643adb55769e) was landed, the frame record (FP and LR register)
may be placed in the middle of a stack frame if a function has both callee-saved
general-purpose registers and floating point registers. This will break the stack unwinders
that simply walk through the frame records (based on the guarantee from AAPCS64
"The Frame Pointer" section). This commit fixes the problem by adding the frame record offset.
Patch By: logan
We have a gap in our store merging capabilities for shift+truncate
patterns as discussed in:
https://llvm.org/PR46662
I generalized the code/comments for this function in earlier commits,
so we only need ease the type restriction and adjust the address/endian
checking to make this work.
AArch64 lets us switch endian to make sure that patterns are matched
either way.
Differential Revision: https://reviews.llvm.org/D86420
`GetFinalPathNameByHandleW(,,N,)` returns:
- `< N` on success (this value does not include the size of the terminating null character)
- `>= N` if buffer is too small (this value includes the size of the terminating null character)
So, when `N == Buffer.capacity() - 1`, we need to resize buffer if return value is > `Buffer.capacity() - 2`.
Also, we can set `N` to `Buffer.capacity()`.
Thus, without this patch `realPathFromHandle()` returns unfilled buffer when length of the final path of the file is equal to `Buffer.capacity()` or `Buffer.capacity() - 1`.
Reviewed By: andrewng, amccarth
Differential Revision: https://reviews.llvm.org/D86564
InstSimplify should do all transformations that ConstProp does, but
one thing that ConstProp does that InstSimplify wouldn't is inline
vector instructions that are constants, e.g. into a ret.
Previously vector instructions wouldn't be inlined in InstSimplify
because llvm::Simplify*Instruction() would return nullptr for specific
instructions, such as vector instructions that were actually constants,
if it couldn't simplify them.
This changes SimplifyInsertElementInst, SimplifyExtractElementInst, and
SimplifyShuffleVectorInst to return a vector constant when possible.
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D85946
The version of `st1d` that operates with vector plus immediate
addressing mode uses the alias `st1d { <Zn>.d }, <Pg>, [<Za>.d]` for
rendering `st1d { <Zn>.d }, <Pg>, [<Za>.d, #0]`. The disassembler was
generating `<Zn>.s` instead of `<Zn>.d>`.
Differential Revision: https://reviews.llvm.org/D86633
For `ld64` which uses legacy LTOCodeGenerator, it relies on
writeMergedModule to perform `ld -r` (generates a linked object file).
If all the inputs to `ld -r` is fullLTO bitcode, `ld64` will linked the
bitcode module, internalize all the symbols and write out another
fullLTO bitcode object file. This bitcode file doesn't have all the
bitcode inputs and it should not have LTOPostLink module flag. It will
also cause error when this bitcode object file is linked with other LTO
object file.
Fix the issue by not applying LTOPostLink flag during writeMergedModule
function. The flag should only be added when all the bitcode are linked
and ready to be optimized.
rdar://problem/58462798
Reviewed By: tejohnson
Differential Revision: https://reviews.llvm.org/D84789
This would assert with unaligned DS access enabled. The offset may not
be aligned. Theoretically the pattern predicate should check the
memory alignment, although it is possible to have the memory be
aligned but not the immediate offset.
In this case I would expect it to use ds_{read|write}_b64 with
unaligned access, but am not clear if there's a reason it doesn't.
and indirect call promotion candidate.
Profile remapping is a feature to match a function in the module with its
profile in sample profile if the function name and the name in profile look
different but are equivalent using given remapping rules. This is a useful
feature to keep the performance stable by specifying some remapping rules
when sampleFDO targets are going through some large scale function signature
change.
However, currently profile remapping support is only valid for outline
function profile in SampleFDO. It cannot match a callee with an inline
instance profile if they have different but equivalent names. We found
that without the support for inline instance profile, remapping is less
effective for some large scale change.
To add that support, before any remapping lookup happens, all the names
in the profile will be inserted into remapper and the Key to the name
mapping will be recorded in a map called NameMap in the remapper. During
name lookup, a Key will be returned for the given name and it will be used
to extract an equivalent name in the profile from NameMap. So with the help
of the NameMap, we can translate any given name to an equivalent name in
the profile if it exists. Whenever we try to match a name in the module to
a name in the profile, we will try the match with the original name first,
and if it doesn't match, we will use the equivalent name got from remapper
to try the match for another time. In this way, the patch can enhance the
profile remapping support for searching inline instance and searching
indirect call promotion candidate.
In a planned large scale change of int64 type (long long) to int64_t (long),
we found the performance of a google internal benchmark degraded by 2% if
nothing was done. If existing profile remapping was enabled, the performance
degradation dropped to 1.2%. If the profile remapping with the current patch
was enabled, the performance degradation further dropped to 0.14% (Note the
experiment was done before searching indirect call promotion candidate was
added. We hope with the remapping support of searching indirect call promotion
candidate, the degradation can drop to 0% in the end. It will be evaluated
post commit).
Differential Revision: https://reviews.llvm.org/D86332
This patch adds NoUndef to Intrinsics.td.
The attribute is attached to llvm.assume's operand, because llvm.assume(undef)
is UB.
It is attached to pointer operands of several memory accessing intrinsics
as well.
This change makes ValueTracking::getGuaranteedNonPoisonOps' intrinsic check
unnecessary, so it is removed.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D86576
This is an older syntax than the {disp32} and {disp8} pseudo
prefixes that were added a few weeks ago. We can reuse most of
the support for that to support .d32 and .d8 as well.
As FIXME said, they really should be checking for a single user,
not use, so let's do that. It is not *that* unusual to have
the same value as incoming value in a PHI node, not unlike
how a PHI may have the same incoming basic block more than once.
There isn't a nice way to do that, Value::users() isn't uniqified,
and Value only tracks it's uses, not Users, so the check is
potentially costly since it does indeed potentially involes
traversing the entire use list of a value.
Instead of computing GUID based on some assumption about symbol mangling
rule from IRName to symbol name, lookup the IRName from all the symtabs
from all the input files to see if there are any matching symbols entry
provides the IRName for GUID computation.
rdar://65853754
Reviewed By: mehdi_amini
Differential Revision: https://reviews.llvm.org/D84803
Summary:
Support TOCU and TOCL relocation type for object file generation.
Reviewed by: DiggerLin
Differential Revision: https://reviews.llvm.org/D84549
The non-standard header file `<sysexits.h>` provides some return values.
`EX_IOERR` is used to as a special value to signal a broken pipe to the clang driver.
On z/OS Unix System Services, this header file does not exists. This patch
- adds a check for `<sysexits.h>`, removing the dependency on `LLVM_ON_UNIX`
- adds a new header file `llvm/Support/ExitCodes`, which either includes
`<sysexits.h>` or defines `EX_IOERR`
- updates the users of `EX_IOERR` to include the new header file
Reviewed By: hubert.reinterpretcast
Differential Revision: https://reviews.llvm.org/D83472
When floating point callee-saved registers were used, the frame pointer would
incorrectly point to the bottom of the CSR space (containing saved floating-point
registers), rather than to the frame record.
While all frame offsets were calculated consistently, resulting in working code,
this prevented stack walkers from being about to traverse the frame list.
This implements 2 different vectorisation fallback strategies if tail-folding
fails: 1) don't vectorise at all, or 2) vectorise using a scalar epilogue. This
can be controlled with option -prefer-predicate-over-epilogue, that has been
changed to take a numeric value corresponding to the tail-folding preference
and preferred fallback.
Patch by: Pierre van Houtryve, Sjoerd Meijer.
Differential Revision: https://reviews.llvm.org/D79783
This patch adds a few tests in DebugInfo/MIR/InstrRef/ of interesting
behaviour that the instruction referencing implementation of
LiveDebugValues has. Mostly, these tests exist to ensure that if you
give the "-experimental-debug-variable-locations" command line switch,
the right implementation runs; and to ensure it behaves the same way as
the VarLoc LiveDebugValues implementation.
I've also touched roughly 30 other tests, purely to make the tests less
rigid about what output to accept. DBG_VALUE instructions are usually
printed with a trailing !debug-location indicating its scope:
!debug-location !1234
However InstrRefBasedLDV produces new DebugLoc instances on the fly,
meaning there sometimes isn't a numbered node when they're printed,
making the output:
!debug-location !DILocation(line: 0, blah blah)
Which causes a ton of these tests to fail. This patch removes checks for
that final part of each DBG_VALUE instruction. None of them appear to
be actually checking the scope is correct, just that it's present, so
I don't believe there's any loss in coverage here.
Differential Revision: https://reviews.llvm.org/D83054
If the condition output is negated, swap the branch targets. This is
similar to what SelectionDAG does for when SelectionDAGBuilder
decides to invert the condition and swap the branches.
This is leaving behind a dead constant def for some reason.
This produces less work for addressing mode matching. I think this is
safe since I don't think machine IR is supposed to give the same
aliasing properties as getelementptr in the IR.
If a workgroup size is known to be not greater than wavefront size
the s_barrier instruction is not needed since all threads are guaranteed
to come to the same point at the same time.
This is the same optimization that was implemented for SelectionDAG in
D31731.
Differential Revision: https://reviews.llvm.org/D86609
This patch makes the unit_length and header_length fields of line tables
optional. yaml2obj is able to infer them for us.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D86590
Before calling target hook to determine if two loads/stores are clusterable,
we put them into different groups to avoid fake cluster due to dependency.
For now, we are putting the loads/stores into the same group if they have
the same predecessor. We assume that, if two loads/stores have the same
predecessor, it is likely that, they didn't have dependency for each other.
However, one SUnit might have several predecessors and for now, we just
pick up the first predecessor that has non-data/non-artificial dependency,
which is too arbitrary. And we are struggling to fix it.
So, I am proposing some better implementation.
1. Collect all the loads/stores that has memory info first to reduce the complexity.
2. Sort these loads/stores so that we can stop the seeking as early as possible.
3. For each load/store, seeking for the first non-dependency instruction with the
sorted order, and check if they can cluster or not.
Reviewed By: Jay Foad
Differential Revision: https://reviews.llvm.org/D85517
Currently, `dyn_cast<XCOFFObjectFile>` always does cast and returns a pointer,
even when we pass `ELF`/`Wasm`/`Mach-O` or `COFF` instead of `XCOFF`.
It happens because `XCOFFObjectFile` class does not implement `classof`.
I've fixed it and added a unit test.
Differential revision: https://reviews.llvm.org/D86542
MVE Gather scatter codegeneration is looking a lot better than it used
to, but still has some issues. The instructions we currently model as 1
cycle per element, which is a bit low for some cases. Increasing the
cost by the MVECostFactor brings them in-line with our other instruction
costs. This will have the effect of only generating then when the extra
benefit is more likely to overcome some of the issues. Notably in
running out of registers and vectorizing loops that could otherwise be
SLP vectorized.
In the short-term whilst we look at other ways of dealing with those
more directly, we can increase the costs of gathers to make them more
likely to be beneficial when created.
Differential Revision: https://reviews.llvm.org/D86444
