:: (store 1 + 4, addrspace 1)
->
:: (store 1 into undef + 4, addrspace 1)
An offset without a base isn't terribly useful but it's convenient to update
the offset without checking the value. For example, when breaking apart
stores into smaller units
Differential Revision: https://reviews.llvm.org/D97812
This patch adds a new instruction that can represent variadic debug values,
DBG_VALUE_VAR. This patch alone covers the addition of the instruction and a set
of basic code changes in MachineInstr and a few adjacent areas, but does not
correctly handle variadic debug values outside of these areas, nor does it
generate them at any point.
The new instruction is similar to the existing DBG_VALUE instruction, with the
following differences: the operands are in a different order, any number of
values may be used in the instruction following the Variable and Expression
operands (these are referred to in code as “debug operands”) and are indexed
from 0 so that getDebugOperand(X) == getOperand(X+2), and the Expression in a
DBG_VALUE_VAR must use the DW_OP_LLVM_arg operator to pass arguments into the
expression.
The new DW_OP_LLVM_arg operator is only valid in expressions appearing in a
DBG_VALUE_VAR; it takes a single argument and pushes the debug operand at the
index given by the argument onto the Expression stack. For example the
sub-expression `DW_OP_LLVM_arg, 0` has the meaning “Push the debug operand at
index 0 onto the expression stack.”
Differential Revision: https://reviews.llvm.org/D82363
fixed-abi uses pre-defined and predictable
SGPR/VGPRs for passing arguments. This patch makes
this scheme default when HSA OS is specified in triple.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D96340
Allow parsing generated mir with custom pseudo source value tokens.
Also rename pseudo source values to have more meaningful names.
Relands ba7dcd8542ab, which had memory leaks.
Differential Revision: https://reviews.llvm.org/D95215
Allow parsing generated mir with custom pseudo source value tokens.
Also rename pseudo source values to have more meaningful names.
Differential Revision: https://reviews.llvm.org/D94768
Memory operands store a base alignment that does not factor in
the effect of the offset on the alignment.
Previously the printing code only printed the base alignment if
it was different than the size. If there is an offset, the reader
would need to figure out the effective alignment themselves. This
has confused me before and someone else was recently confused on
IRC.
This patch prints the possibly offset adjusted alignment if it is
different than the size. And prints the base alignment if it is
different than the alignment. The MIR parser has been updated to
read basealign in addition to align.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D94344
The MIRParser expects unnamed stack entries to have empty names ('').
In case of unnamed alloca instructions, the MIRPrinter would output
'<unnamed alloca>', which caused the MIRParser to reject the generated
code.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D93685
Currently unknown keys when inputting mapping traits have the location set to the Value.
Example:
```
YAML:1:14: error: unknown key 'UnknownKey'
{UnknownKey: SomeValue}
^~~~~~~~~
```
This is unhelpful for a user as it draws them to fix the wrong item.
Reviewed By: silvas
Differential Revision: https://reviews.llvm.org/D93037
This hashing scheme has been useful out of tree, and I want to start
experimenting with it. Specifically I want to experiment on the
MIRVRegNamer, MIRCanononicalizer, and eventually the MachineOutliner.
This diff is a first step, that optionally brings stable hashing to the
MIRVRegNamer (and as a result, the MIRCanonicalizer). We've tested this
hashing scheme on a lot of MachineOperand types that llvm::hash_value
can not handle in a stable manner.
This stable hashing was also the basis for
"Global Machine Outliner for ThinLTO" in EuroLLVM 2020
http://llvm.org/devmtg/2020-04/talks.html#TechTalk_58
Credits: Kyungwoo Lee, Nikolai Tillmann
Differential Revision: https://reviews.llvm.org/D86952
The addend in a REL32 reloc needs to be adjusted to account for the
offset from the PC value returned by the s_getpc instruction to the
point where the reloc is applied. This was being done correctly for
(GOTPC)REL32_LO but not for (GOTPC)REL32_HI. This will only make a
difference if the target symbol happens to get loaded almost exactly
a multiple of 4G away from the relocated instructions.
Differential Revision: https://reviews.llvm.org/D86938
It's possible to have a single virtual register def with a subreg
index that would pass the previous check, but it's not possible to
have a subregister def in SSA.
This is in preparation for adding stricter checks for SSA MIR.
Features UnalignedBufferAccess and UnalignedDSAccess are now used to determine
whether hardware supports such access.
UnalignedAccessMode should be used to enable them.
hasUnalignedBufferAccessEnabled() and hasUnalignedDSAccessEnabled() can be
now used to quickly check both.
Differential Revision: https://reviews.llvm.org/D84522
Summary:
- HIP uses an unsized extern array `extern __shared__ T s[]` to declare
the dynamic shared memory, which size is not known at the
compile time.
Reviewers: arsenm, yaxunl, kpyzhov, b-sumner
Subscribers: kzhuravl, jvesely, wdng, nhaehnle, dstuttard, tpr, t-tye, hiraditya, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D82496
These should probably be inferred from the function on parse, but the
target specific infrastructure currently does not give you a way to do
this. SILowerSGPRSpills early exits without this reporting spills,
which makes it difficult to write a MIR test for.
Summary:
The printer seems to intend to not print the trailing comma but has a
copy-paste error for the last value in the escape, and the parser
enforces having no trailing comma, but somehow a test was never included
to actually confirm it.
Reviewers: thegameg, arsenm
Reviewed By: thegameg, arsenm
Subscribers: wdng, arsenm, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D82478
Summary:
Verify that each DBG_VALUE has a debug location. This is required by
LiveDebugValues, and perhaps by other late passes.
There's an exception for tests: lots of tests use a two-operand form of
DBG_VALUE for convenience. There's no reason to prevent that.
This is an extension of D80665, but there's no dependency.
Reviewers: aprantl, jmorse, davide, chrisjackson
Subscribers: hiraditya, asb, rbar, johnrusso, simoncook, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, rogfer01, MartinMosbeck, brucehoult, the_o, PkmX, jocewei, Jim, lenary, s.egerton, pzheng, sameer.abuasal, apazos, luismarques, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D80670
Hash Jump Table Indices uniquely within a basic block for MIR
Canonicalizer / MIR VReg Renamer passes.
Differential Revision: https://reviews.llvm.org/D77966
The immediate used for the regdef is the encoding for the register
class in the enum generated by tablegen. This encoding will change
any time a new register class is added. Since the number is part
of the input, this means it can become stale.
This change modifies some test to avoid this kind of immediate
all together. And updates one test to use the current encoding of
GR64.
Starting with hasRedZone adding MachineFunctionInfo to be put in the YAML for MIR files.
Split out of: D78062
Based on implementation for MachineFunctionInfo for WebAssembly
Differential Revision: https://reviews.llvm.org/D78173
Patch by Andrew Litteken! (AndrewLitteken)
Summary:
The INLINEASM MIR instructions use immediate operands to encode the values of some operands.
The MachineInstr pretty printer function already handles those operands and prints human readable annotations instead of the immediates. This patch adds similar annotations to the output of the MIRPrinter, however uses the new MIROperandComment feature.
Reviewers: SjoerdMeijer, arsenm, efriedma
Reviewed By: arsenm
Subscribers: qcolombet, sdardis, jvesely, wdng, nhaehnle, hiraditya, jrtc27, atanasyan, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78088
This will likely introduce catastrophic performance regressions on
older subtargets, but should be correct. A follow up change will
remove the old fp32-denormals subtarget features, and switch to using
the new denormal-fp-math/denormal-fp-math-f32 attributes. Frontends
should be making sure to add the denormal-fp-math-f32 attribute when
appropriate to avoid performance regressions.
Remove the gap left between the stack pointer (s32) and frame pointer
(s34) now that the scratch wave offset is no longer a part of the
calling convention ABI.
Update llvm/docs/AMDGPUUsage.rst to reflect the change.
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D75657
Add the scratch wave offset to the scratch buffer descriptor (SRSrc) in
the entry function prologue. This allows us to removes the scratch wave
offset register from the calling convention ABI.
As part of this change, allow the use of an inline constant zero for the
SOffset of MUBUF instructions accessing the stack in entry functions
when a frame pointer is not requested/required. Entry functions with
calls still need to set up the calling convention ABI stack pointer
register, and reference it in order to address arguments of called
functions. The ABI stack pointer register remains unswizzled, but is now
wave-relative instead of queue-relative.
Non-entry functions also use an inline constant zero SOffset for
wave-relative scratch access, but continue to use the stack and frame
pointers as before. When the stack or frame pointer is converted to a
swizzled offset it is now scaled directly, as the scratch wave offset no
longer needs to be subtracted first.
Update llvm/docs/AMDGPUUsage.rst to reflect these changes to the calling
convention.
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D75138
Rather than trying to work out which instructions are part of the
epilogue by examining them, we can just mark them with the FrameDestroy
flag, like we do in the AArch64 backend.
When hashing on MachineOperand::MO_ConstantPoolIndex, now MIR-Canon and
MIRVRegNamer will no longer result in a hash collision.
Differential Revision: https://reviews.llvm.org/D74449
This is needed for D74873, AMDGPU going to have 16 bit subregs
and the largest tuple is 32 VGPRs, which results in 64 lanes.
Differential Revision: https://reviews.llvm.org/D75378
This adds infrastructure to print and parse MIR MachineOperand comments.
The motivation for the ARM backend is to print condition code names instead of
magic constants that are difficult to read (for human beings). For example,
instead of this:
dead renamable $r2, $cpsr = tEOR killed renamable $r2, renamable $r1, 14, $noreg
t2Bcc %bb.4, 0, killed $cpsr
we now print this:
dead renamable $r2, $cpsr = tEOR killed renamable $r2, renamable $r1, 14 /* CC::always */, $noreg
t2Bcc %bb.4, 0 /* CC:eq */, killed $cpsr
This shows that MachineOperand comments are enclosed between /* and */. In this
example, the EOR instruction is not conditionally executed (i.e. it is "always
executed"), which is encoded by the 14 immediate machine operand. Thus, now
this machine operand has /* CC::always */ as a comment. The 0 on the next
conditional branch instruction represents the equal condition code, thus now
this operand has /* CC:eq */ as a comment.
As it is a comment, the MI lexer/parser completely ignores it. The benefit is
that this keeps the change in the lexer extremely minimal and no target
specific parsing needs to be done. The changes on the MIPrinter side are also
minimal, as there is only one target hooks that is used to create the machine
operand comments.
Differential Revision: https://reviews.llvm.org/D74306
This patch enables the debug entry values feature.
- Remove the (CC1) experimental -femit-debug-entry-values option
- Enable it for x86, arm and aarch64 targets
- Resolve the test failures
- Leave the llc experimental option for targets that do not
support the CallSiteInfo yet
Differential Revision: https://reviews.llvm.org/D73534
