The addition of `inverse_throughput` mode highlighted the disjointedness
of snippet generators and benchmark runners because it used the
`UopsSnippetGenerator` with the `LatencyBenchmarkRunner`.
To keep the code consistent tie the snippet generators to
parallelization/serialization rather than their benchmark runners.
Renaming `LatencySnippetGenerator` -> `SerialSnippetGenerator`.
Renaming `UopsSnippetGenerator` -> `ParallelSnippetGenerator`.
Differential Revision: https://reviews.llvm.org/D72928
It's been an empty target since r360498 and friends
(`git log --grep='Move InstPrinter files to MCTargetDesc.' llvm/lib/Target`),
but due to hwo the way these targets are structured it was silently
an empty target without anyone noticing.
No behavior change.
Summary:
For builds with LLVM_BUILD_LLVM_DYLIB=ON and BUILD_SHARED_LIBS=OFF
this change makes all symbols in the target specific libraries hidden
by default.
A new macro called LLVM_EXTERNAL_VISIBILITY has been added to mark symbols in these
libraries public, which is mainly needed for the definitions of the
LLVMInitialize* functions.
This patch reduces the number of public symbols in libLLVM.so by about
25%. This should improve load times for the dynamic library and also
make abi checker tools, like abidiff require less memory when analyzing
libLLVM.so
One side-effect of this change is that for builds with
LLVM_BUILD_LLVM_DYLIB=ON and LLVM_LINK_LLVM_DYLIB=ON some unittests that
access symbols that are no longer public will need to be statically linked.
Before and after public symbol counts (using gcc 8.2.1, ld.bfd 2.31.1):
nm before/libLLVM-9svn.so | grep ' [A-Zuvw] ' | wc -l
36221
nm after/libLLVM-9svn.so | grep ' [A-Zuvw] ' | wc -l
26278
Reviewers: chandlerc, beanz, mgorny, rnk, hans
Reviewed By: rnk, hans
Subscribers: merge_guards_bot, luismarques, smeenai, ldionne, lenary, s.egerton, pzheng, sameer.abuasal, MaskRay, wuzish, echristo, Jim, hiraditya, michaelplatings, chapuni, jholewinski, arsenm, dschuff, jyknight, dylanmckay, sdardis, nemanjai, jvesely, javed.absar, sbc100, jgravelle-google, aheejin, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, zzheng, edward-jones, mgrang, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, PkmX, jocewei, kristina, jsji, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D54439
Summary: This is a follow up on D71137 properly setting up the AsmTargetStreamer prior to AsmParser::Run call.
Reviewers: courbet, mstojanovic
Subscribers: tschuett, mikhail.ramalho, llvm-commits, petarj, atanasyan
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71468
Test writing and reading benchmark instructions to and from disc, and
check calculations of min, max and avg values from a list of benchmark
measures.
Differential Revision: https://reviews.llvm.org/D71265
The target does just enough to be able to run llvm-exegesis in latency
mode for at least some opcodes.
Patch by Miloš Stojanović.
Differential Revision: https://reviews.llvm.org/D68649
llvm-svn: 374590
Summary:
This adds a `-max-configs-per-opcode` option to limit the number of
configs per opcode.
Reviewers: gchatelet
Subscribers: tschuett, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68642
llvm-svn: 374054
Summary:
Right now there are no snippet generators that emit the `Config` Field,
but I plan to add it to investigate LEA operands for PR32326.
What was broken was:
- `Config` Was not propagated up until the BenchmarkResult::Key.
- Clustering should really consider different configs as measuring
different things, so we should stabilize on (Opcode, Config) instead of
just Opcode.
Reviewers: gchatelet
Subscribers: tschuett, llvm-commits, lebedev.ri
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68629
llvm-svn: 374031
Summary:
Before this change the Executable function was made by duplicating the
snippet. This change adds a --repetion-mode={loop|duplicate} flag that
allows choosing between this behaviour and wrapping the snippet instructions
in a loop.
The new mode can help measurements when the snippet fits in the DSB by
short-cirtcuiting decoding. The loop adds a dec + jmp to the measurements, but
since these are not part of the critical path, they execute in parallel
with the measured code and do not impact measurements in practice.
Overview of the change:
- New SnippetRepetitor abstraction that handles repeating the snippet.
The assembler delegates repeating the instructions to this class.
- ExegesisTarget learns how to decrement loop counter and jump.
- Some refactoring of the assembler into FunctionFiller/BasicBlockFiller.
Reviewers: gchatelet
Subscribers: mgorny, tschuett, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68125
llvm-svn: 373083
Summary:
Right now latency generation can incorrectly select the scratch register
as a dependency-carrying register.
- Move the logic for preventing register selection from Uops
implementation to common SnippetGenerator class.
- Aliasing detection now takes a set of forbidden registers just like
random register assignment does.
Reviewers: gchatelet
Subscribers: tschuett, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68084
llvm-svn: 373048
This reverts r362990 (git commit 374571301dc8e9bc9fdd1d70f86015de198673bd)
This was causing linker warnings on Darwin:
ld: warning: direct access in function 'llvm::initializeEvexToVexInstPassPass(llvm::PassRegistry&)'
from file '../../lib/libLLVMX86CodeGen.a(X86EvexToVex.cpp.o)' to global weak symbol
'void std::__1::__call_once_proxy<std::__1::tuple<void* (&)(llvm::PassRegistry&),
std::__1::reference_wrapper<llvm::PassRegistry>&&> >(void*)' from file '../../lib/libLLVMCore.a(Verifier.cpp.o)'
means the weak symbol cannot be overridden at runtime. This was likely caused by different translation
units being compiled with different visibility settings.
llvm-svn: 363028
Summary:
For builds with LLVM_BUILD_LLVM_DYLIB=ON and BUILD_SHARED_LIBS=OFF
this change makes all symbols in the target specific libraries hidden
by default.
A new macro called LLVM_EXTERNAL_VISIBILITY has been added to mark symbols in these
libraries public, which is mainly needed for the definitions of the
LLVMInitialize* functions.
This patch reduces the number of public symbols in libLLVM.so by about
25%. This should improve load times for the dynamic library and also
make abi checker tools, like abidiff require less memory when analyzing
libLLVM.so
One side-effect of this change is that for builds with
LLVM_BUILD_LLVM_DYLIB=ON and LLVM_LINK_LLVM_DYLIB=ON some unittests that
access symbols that are no longer public will need to be statically linked.
Before and after public symbol counts (using gcc 8.2.1, ld.bfd 2.31.1):
nm before/libLLVM-9svn.so | grep ' [A-Zuvw] ' | wc -l
36221
nm after/libLLVM-9svn.so | grep ' [A-Zuvw] ' | wc -l
26278
Reviewers: chandlerc, beanz, mgorny, rnk, hans
Reviewed By: rnk, hans
Subscribers: Jim, hiraditya, michaelplatings, chapuni, jholewinski, arsenm, dschuff, jyknight, dylanmckay, sdardis, nemanjai, jvesely, nhaehnle, javed.absar, sbc100, jgravelle-google, aheejin, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, zzheng, edward-jones, mgrang, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, PkmX, jocewei, kristina, jsji, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D54439
llvm-svn: 362990
Summary:
Reorder the condition code enum to match their encodings. Move it to MC layer so it can be used by the scheduler models.
This avoids needing an isel pattern for each condition code. And it removes
translation switches for converting between CMOV instructions and condition
codes.
Now the printer, encoder and disassembler take care of converting the immediate.
We use InstAliases to handle the assembly matching. But we print using the
asm string in the instruction definition. The instruction itself is marked
IsCodeGenOnly=1 to hide it from the assembly parser.
This does complicate the scheduler models a little since we can't assign the
A and BE instructions to a separate class now.
I plan to make similar changes for SETcc and Jcc.
Reviewers: RKSimon, spatel, lebedev.ri, andreadb, courbet
Reviewed By: RKSimon
Subscribers: gchatelet, hiraditya, kristina, lebedev.ri, jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60041
llvm-svn: 357800
Summary:
`ResolvedSchedClass` will need to be used outside of `Analysis`
(before `InstructionBenchmarkClustering` even), therefore promote
it into a non-private top-level class, and while there also
move all of the functions that are only called by `ResolvedSchedClass`
into that same new file.
Reviewers: courbet, gchatelet
Reviewed By: courbet
Subscribers: mgorny, tschuett, mgrang, jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59993
llvm-svn: 357259
Summary:
This is an alternative to D59539.
Let's suppose we have measured 4 different opcodes, and got: `0.5`, `1.0`, `1.5`, `2.0`.
Let's suppose we are using `-analysis-clustering-epsilon=0.5`.
By default now we will start processing the `0.5` point, find that `1.0` is it's neighbor, add them to a new cluster.
Then we will notice that `1.5` is a neighbor of `1.0` and add it to that same cluster.
Then we will notice that `2.0` is a neighbor of `1.5` and add it to that same cluster.
So all these points ended up in the same cluster.
This may or may not be a correct implementation of dbscan clustering algorithm.
But this is rather horribly broken for the reasons of comparing the clusters with the LLVM sched data.
Let's suppose all those opcodes are currently in the same sched cluster.
If i specify `-analysis-inconsistency-epsilon=0.5`, then no matter
the LLVM values this cluster will **never** match the LLVM values,
and thus this cluster will **always** be displayed as inconsistent.
The solution is obviously to split off some of these opcodes into different sched cluster.
But how do i do that? Out of 4 opcodes displayed in the inconsistency report,
which ones are the "bad ones"? Which ones are the most different from the checked-in data?
I'd need to go in to the `.yaml` and look it up manually.
The trivial solution is to, when creating clusters, don't use the full dbscan algorithm,
but instead "pick some unclustered point, pick all unclustered points that are it's neighbor,
put them all into a new cluster, repeat". And just so as it happens, we can arrive
at that algorithm by not performing the "add neighbors of a neighbor to the cluster" step.
But that won't work well once we teach analyze mode to operate in on-1D mode
(i.e. on more than a single measurement type at a time), because the clustering would
depend on the order of the measurements.
Instead, let's just create a single cluster per opcode, and put all the points of that opcode into said cluster.
And simultaneously check that every point in that cluster is a neighbor of every other point in the cluster,
and if they are not, the cluster (==opcode) is unstable.
This is //yet another// step to bring me closer to being able to continue cleanup of bdver2 sched model..
Fixes [[ https://bugs.llvm.org/show_bug.cgi?id=40880 | PR40880 ]].
Reviewers: courbet, gchatelet
Reviewed By: courbet
Subscribers: tschuett, jdoerfert, RKSimon, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59820
llvm-svn: 357152
Summary:
This prevents "Cannot encode high byte register in REX-prefixed instruction"
from happening on instructions that require REX encoding when AH & co
get selected.
On the down side, these 4 registers can no longer be selected
automatically, but this avoids having to expose all the X86 encoding
complexity.
Reviewers: gchatelet
Subscribers: tschuett, jdoerfert, llvm-commits, bdb
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59821
llvm-svn: 357003
Summary: To show that dbscan is insensitive to the order of the points.
Subscribers: tschuett, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59693
llvm-svn: 356747
That patch is the fix for https://bugs.llvm.org/show_bug.cgi?id=40703
"wrong line number info for obj file compiled with -ffunction-sections"
bug. The problem happened with only .o files. If object file contains
several .text sections then line number information showed incorrectly.
The reason for this is that DwarfLineTable could not detect section which
corresponds to specified address(because address is the local to the
section). And as the result it could not select proper sequence in the
line table. The fix is to pass SectionIndex with the address. So that it
would be possible to differentiate addresses from various sections. With
this fix llvm-objdump shows correct line numbers for disassembled code.
Differential review: https://reviews.llvm.org/D58194
llvm-svn: 354972
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
Apply review comments of https://reviews.llvm.org/D54185 to other target as well, specifically:
1. make anonymous namespaces as small as possible, avoid using static inside anonymous namespaces
2. Add missing header to some files
3. GetLoadImmediateOpcodem-> getLoadImmediateOpcode
4. Fix typo
Differential Revision: https://reviews.llvm.org/D54343
llvm-svn: 347309
Summary:
This simplifies the code and moves everything to tablegen for consistency. This
also prepares the ground for adding issue counters.
Reviewers: gchatelet, john.brawn, jsji
Subscribers: nemanjai, mgorny, javed.absar, kbarton, tschuett, llvm-commits
Differential Revision: https://reviews.llvm.org/D54297
llvm-svn: 346489
This is patch to add PowerPC target to llvm-exegesis.
The target does just enough to be able to run llvm-exegesis in latency mode for at least some opcodes.
Differential Revision: https://reviews.llvm.org/D54185
llvm-svn: 346411
Summary:
This allows simplifying references of llvm::foo with foo when the needs
come in the future.
Reviewers: courbet, gchatelet
Reviewed By: gchatelet
Subscribers: javed.absar, tschuett, llvm-commits
Differential Revision: https://reviews.llvm.org/D53455
llvm-svn: 344922
Summary:
This was lost during refactoring in rL342644.
Fix and simplify simplify value size handling: always go through a 80 bit value,
because the value can be 1 byte). Add unit tests.
Reviewers: gchatelet
Subscribers: tschuett, llvm-commits
Differential Revision: https://reviews.llvm.org/D53423
llvm-svn: 344779
Summary: LatencyGenerator now computes all possible mode of serial execution for an Instruction upfront and generates CodeTemplate for the ones that give the best results (e.g. no need to generate a two instructions snippet when repeating a single one would do). The next step is to generate even more configurations for cases (e.g. for XOR we should generate "XOR EAX, EAX, EAX" and "XOR EAX, EAX, EBX")
Reviewers: courbet
Reviewed By: courbet
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D53320
llvm-svn: 344689
Summary: This is part one of the change where I simply changed the signature of the functions. More work need to be done to actually produce more than one CodeTemplate per instruction.
Reviewers: courbet
Subscribers: tschuett, llvm-commits
Differential Revision: https://reviews.llvm.org/D53209
llvm-svn: 344493
Summary: Simplify code by having LLVMState hold the RegisterAliasingTrackerCache.
Reviewers: courbet
Subscribers: tschuett, llvm-commits
Differential Revision: https://reviews.llvm.org/D53078
llvm-svn: 344143
Summary:
THis is a backwards-compatible change (existing files will work as
expected).
See PR39082.
Reviewers: gchatelet
Subscribers: tschuett, llvm-commits
Differential Revision: https://reviews.llvm.org/D52546
llvm-svn: 343108
