- For now, loads of [r, r] addressing mode is the same as the
[r, r lsl/lsr/asr #] variants. ARMBaseInstrInfo::getOperandLatency() should
identify the former case and reduce the output latency by 1.
- Also identify [r, r << 2] case. This special form of shifter addressing mode
is "free".
llvm-svn: 117519
elements than the result vector type. So, when an instruction like:
%8 = shufflevector <2 x float> %4, <2 x float> %7, <4 x i32> <i32 1, i32 0, i32 3, i32 2>
is translated to a DAG, each operand is changed to a concat_vectors node that appends 2 undef elements. That is:
shuffle [a,b], [c,d] is changed to:
shuffle [a,b,u,u], [c,d,u,u]
That's probably the right thing for x86 but for NEON, we'd much rather have:
shuffle [a,b,c,d], undef
Teach the DAG combiner how to do that transformation for ARM. Radar 8597007.
llvm-svn: 117482
do not double-count the duplicate instructions by counting once from the
beginning and again from the end. Keep track of where the duplicates from
the beginning ended and don't go past that point when counting duplicates
at the end. Radar 8589805.
This change causes one of the MC/ARM/simple-fp-encoding tests to produce
different (better!) code without the vmovne instruction being tested.
I changed the test to produce vmovne and vmoveq instructions but moving
between register files in the opposite direction. That's not quite the same
but predicated versions of those instructions weren't being tested before,
so at least the test coverage is not any worse, just different.
llvm-svn: 117333
"long latency" enough to hoist even if it may increase spilling. Reloading
a value from spill slot is often cheaper than performing an expensive
computation in the loop. For X86, that means machine LICM will hoist
SQRT, DIV, etc. ARM will be somewhat aggressive with VFP and NEON
instructions.
- Enable register pressure aware machine LICM by default.
llvm-svn: 116781
have been printed with the "S" modifier after the predicate. With ARM's
unified syntax, they are supposed to go in the other order. We fixed this
for Thumb when we switched to unified syntax but missed changing it for
ARM. Apparently we don't generate these instructions often because no one
noticed until now. Thanks to Bill Wendling for the testcase!
llvm-svn: 116563
1. Cortex-A8 load / store multiplies can only issue on ALU0.
2. Eliminate A8_Issue, A8_LSPipe will correctly limit the load / store issues.
3. Correctly model all vld1 and vld2 variants.
llvm-svn: 116134
callee-saved registers at the end of the lists. Also prefer to avoid using
the low registers that are in register subclasses required by certain
instructions, so that those registers will more likely be available when needed.
This change makes a huge improvement in spilling in some cases. Thanks to
Jakob for helping me realize the problem.
Most of this patch is fixing the testsuite. There are quite a few places
where we're checking for specific registers. I changed those to wildcards
in places where that doesn't weaken the tests. The spill-q.ll and
thumb2-spill-q.ll tests stopped spilling with this change, so I added a bunch
of live values to force spills on those tests.
llvm-svn: 116055
allow target to correctly compute latency for cases where static scheduling
itineraries isn't sufficient. e.g. variable_ops instructions such as
ARM::ldm.
This also allows target without scheduling itineraries to compute operand
latencies. e.g. X86 can return (approximated) latencies for high latency
instructions such as division.
- Compute operand latencies for those defined by load multiple instructions,
e.g. ldm and those used by store multiple instructions, e.g. stm.
llvm-svn: 115755
cost modeling for if-conversion. Now if only we had a way to estimate the misprediction probability.
Adjsut CodeGen/ARM/ifcvt10.ll. The pipeline on Cortex-A8 is long enough that it is still profitable
to predicate an ldm, but the shorter pipeline on Cortex-A9 makes it unprofitable.
llvm-svn: 114995
Rather than having arbitrary cutoffs, actually try to cost model the conversion.
For now, the constants are tuned to more or less match our existing behavior, but these will be
changed to reflect realistic values as this work proceeds.
llvm-svn: 114973
This reverts revision 114633. It was breaking llvm-gcc-i386-linux-selfhost.
It seems there is a downstream bug that is exposed by
-cgp-critical-edge-splitting=0. When that bug is fixed, this patch can go back
in.
Note that the changes to tailcallfp2.ll are not reverted. They were good are
required.
llvm-svn: 114859
between the high and low registers for prologue/epilogue code. This was
a Darwin-only thing that wasn't providing a realistic benefit anymore.
Combining the save areas simplifies the compiler code and results in better
ARM/Thumb2 codegen.
For example, previously we would generate code like:
push {r4, r5, r6, r7, lr}
add r7, sp, #12
stmdb sp!, {r8, r10, r11}
With this change, we combine the register saves and generate:
push {r4, r5, r6, r7, r8, r10, r11, lr}
add r7, sp, #12
rdar://8445635
llvm-svn: 114340
value should be in GPRs when it's going to be used as a scalar, and we use
VMOVRRD to make that happen, but if the value is converted back to a vector
we need to fold to a simple bit_convert. Radar 8407927.
llvm-svn: 114233
legacy asm printer uses instructions of the form, "mov r0, r0, lsl #3", while
the MC-instruction printer uses the form "lsl r0, r0, #3". The latter mnemonic
is correct and preferred according the ARM documentation (A8.6.98). The former
are pseudo-instructions for the latter.
llvm-svn: 114221
encountered while building llvm-gcc for arm. This is probably the same issue
that the ppc buildbot hit. llvm::prior works on a MachineBasicBlock::iterator,
not a plain MachineInstr.
llvm-svn: 113983
backing out following to get it back to green,
so I can investigate in peace:
svn merge -c -113840 llvm/test/CodeGen/ARM/arm-and-tst-peephole.ll
svn merge -c -113876 -c -113839 llvm/lib/Target/ARM/ARMBaseInstrInfo.cpp
llvm-svn: 113980
to expose greater opportunities for store narrowing in codegen. This patch fixes a potential
infinite loop in instcombine caused by one of the introduced transforms being overly aggressive.
llvm-svn: 113763
to use AddrMode4, there was a count of the registers stored in one of the
operands. I changed that to just count the operands but forgot to adjust for
the size of D registers. This was noticed by Evan as a performance problem
but it is a potential correctness bug as well, since it is possible that this
could merge a base update with a non-matching immediate.
llvm-svn: 113576
take multiple cycles to decode.
For the current if-converter clients (actually only ARM), the instructions that
are predicated on false are not nops. They would still take machine cycles to
decode. Micro-coded instructions such as LDM / STM can potentially take multiple
cycles to decode. If-converter should take treat them as non-micro-coded
simple instructions.
llvm-svn: 113570
vabd intrinsic and add and/or zext operations. In the case of vaba, this
also avoids the need for a DAG combine pattern to combine vabd with add.
Update tests. Auto-upgrade the old intrinsics.
llvm-svn: 112941
add, and subtract operations with zero-extended or sign-extended vectors.
Update tests. Add auto-upgrade support for the old intrinsics.
llvm-svn: 112773
int x(int t) {
if (t & 256)
return -26;
return 0;
}
We generate this:
tst.w r0, #256
mvn r0, #25
it eq
moveq r0, #0
while gcc generates this:
ands r0, r0, #256
it ne
mvnne r0, #25
bx lr
Scandalous really!
During ISel time, we can look for this particular pattern. One where we have a
"MOVCC" that uses the flag off of a CMPZ that itself is comparing an AND
instruction to 0. Something like this (greatly simplified):
%r0 = ISD::AND ...
ARMISD::CMPZ %r0, 0 @ sets [CPSR]
%r0 = ARMISD::MOVCC 0, -26 @ reads [CPSR]
All we have to do is convert the "ISD::AND" into an "ARM::ANDS" that sets [CPSR]
when it's zero. The zero value will all ready be in the %r0 register and we only
need to change it if the AND wasn't zero. Easy!
llvm-svn: 112664
all the other LDM/STM instructions. This fixes asm printer crashes when
compiling with -O0. I've changed one of the NEON tests (vst3.ll) to run
with -O0 to check this in the future.
Prior to this change VLDM/VSTM used addressing mode #5, but not really.
The offset field was used to hold a count of the number of registers being
loaded or stored, and the AM5 opcode field was expanded to specify the IA
or DB mode, instead of the standard ADD/SUB specifier. Much of the backend
was not aware of these special cases. The crashes occured when rewriting
a frameindex caused the AM5 offset field to be changed so that it did not
have a valid submode. I don't know exactly what changed to expose this now.
Maybe we've never done much with -O0 and NEON. Regardless, there's no longer
any reason to keep a count of the VLDM/VSTM registers, so we can use
addressing mode #4 and clean things up in a lot of places.
llvm-svn: 112322
float t1(int argc) {
return (argc == 1123) ? 1.234f : 2.38213f;
}
We would generate truly awful code on ARM (those with a weak stomach should look
away):
_t1:
movw r1, #1123
movs r2, #1
movs r3, #0
cmp r0, r1
mov.w r0, #0
it eq
moveq r0, r2
movs r1, #4
cmp r0, #0
it ne
movne r3, r1
adr r0, #LCPI1_0
ldr r0, [r0, r3]
bx lr
The problem was that legalization was creating a cascade of SELECT_CC nodes, for
for the comparison of "argc == 1123" which was fed into a SELECT node for the ?:
statement which was itself converted to a SELECT_CC node. This is because the
ARM back-end doesn't have custom lowering for SELECT nodes, so it used the
default "Expand".
I added a fairly simple "LowerSELECT" to the ARM back-end. It takes care of this
testcase, but can obviously be expanded to include more cases.
Now we generate this, which looks optimal to me:
_t1:
movw r1, #1123
movs r2, #0
cmp r0, r1
adr r0, #LCPI0_0
it eq
moveq r2, #4
ldr r0, [r0, r2]
bx lr
.align 2
LCPI0_0:
.long 1075344593 @ float 2.382130e+00
.long 1067316150 @ float 1.234000e+00
llvm-svn: 110799
Without this what was happening was:
* R3 is not marked as "used"
* ARM backend thinks it has to save it to the stack because of vaarg
* Offset computation correctly ignores it
* Offsets are wrong
llvm-svn: 110446
This assumption is not satisfied due to global mergeing.
Workaround the issue by temporary disablinge mergeing of const globals.
Also, ignore LLVM "special" globals. This fixes PR7716
llvm-svn: 109423
it's too late to start backing off aggressive latency scheduling when most
of the registers are in use so the threshold should be a bit tighter.
- Correctly handle live out's and extract_subreg etc.
- Enable register pressure aware scheduling by default for hybrid scheduler.
For ARM, this is almost always a win on # of instructions. It's runtime
neutral for most of the tests. But for some kernels with high register
pressure it can be a huge win. e.g. 464.h264ref reduced number of spills by
54 and sped up by 20%.
llvm-svn: 109279
-enable-no-nans-fp-math and -enable-no-infs-fp-math. All of the current codegen fp math optimizations only care whether the fp arithmetics arguments and results can never be NaN.
llvm-svn: 108465
correct alignment information, which simplifies ExpandRes_VAARG a bit.
The patch introduces a new alignment information to TargetLoweringInfo. This is
needed since the two natural candidates cannot be used:
* The 's' in target data: If this is set to the minimal alignment of any
argument, getCallFrameTypeAlignment would return 4 for doubles on ARM for
example.
* The getTransientStackAlignment method. It is possible for an architecture to
have argument less aligned than what we maintain the stack pointer.
llvm-svn: 108072
disabled and then never turned back on again. Adjust some tests, one because
this change avoids an unnecessary instruction, and the other to make it
continue testing what it was intended to test.
llvm-svn: 107941
1. The arguments are f32.
2. The arguments are loads and they have no uses other than the comparison.
3. The comparison code is EQ or NE.
e.g.
vldr.32 s0, [r1]
vldr.32 s1, [r0]
vcmpe.f32 s1, s0
vmrs apsr_nzcv, fpscr
beq LBB0_2
=>
ldr r1, [r1]
ldr r0, [r0]
cmp r0, r1
beq LBB0_2
More complicated cases will be implemented in subsequent patches.
llvm-svn: 107852
Add explicit testcases for tail calls within the same module.
Duplicate some code to humor those who think .w doesn't apply on ARM.
Leave this disabled on Thumb1, and add some comments explaining why it's hard
and won't gain much.
llvm-svn: 107851
Objective-C metadata types which should be marked as "weak", but which the
linker will remove upon final linkage. However, this linkage isn't specific to
Objective-C.
For example, the "objc_msgSend_fixup_alloc" symbol is defined like this:
.globl l_objc_msgSend_fixup_alloc
.weak_definition l_objc_msgSend_fixup_alloc
.section __DATA, __objc_msgrefs, coalesced
.align 3
l_objc_msgSend_fixup_alloc:
.quad _objc_msgSend_fixup
.quad L_OBJC_METH_VAR_NAME_1
This is different from the "linker_private" linkage type, because it can't have
the metadata defined with ".weak_definition".
Currently only supported on Darwin platforms.
llvm-svn: 107433
A partial redefine needs to be treated like a tied operand, and the register
must be reloaded while processing use operands.
This fixes a bug where partially redefined registers were processed as normal
defs with a reload added. The reload could clobber another use operand if it was
a kill that allowed register reuse.
llvm-svn: 107193
The LowerSubregs pass needs to preserve implicit def operands attached to
EXTRACT_SUBREG instructions when it replaces those instructions with copies.
llvm-svn: 107189
of getPhysicalRegisterRegClass with it.
If we want to make a copy (or estimate its cost), it is better to use the
smallest class as more efficient operations might be possible.
llvm-svn: 107140
introduced in r106343, but only showed up recently (with a particular compiler &
linker combination) because of the particular check, and because we have no
builtin checking for dereferencing the end of an array, which is truly
unfortunate.
llvm-svn: 106908
CoalescerPair can determine if a copy can be coalesced, and which register gets
merged away. The old logic in SimpleRegisterCoalescing had evolved into
something a bit too convoluted.
This second attempt fixes some crashes that only occurred Linux.
llvm-svn: 106769
CoalescerPair can determine if a copy can be coalesced, and which register gets
merged away. The old logic in SimpleRegisterCoalescing had evolved into
something a bit too convoluted.
llvm-svn: 106701
void t(int *cp0, int *cp1, int *dp, int fmd) {
int c0, c1, d0, d1, d2, d3;
c0 = (*cp0++ & 0xffff) | ((*cp1++ << 16) & 0xffff0000);
c1 = (*cp0++ & 0xffff) | ((*cp1++ << 16) & 0xffff0000);
/* ... */
}
It code gens into something pretty bad. But with this change (analogous to the
X86 back-end), it will use ldm and generate few instructions.
llvm-svn: 106693
- This fixed a number of bugs in if-converter, tail merging, and post-allocation
scheduler. If-converter now runs branch folding / tail merging first to
maximize if-conversion opportunities.
- Also changed the t2IT instruction slightly. It now defines the ITSTATE
register which is read by instructions in the IT block.
- Added Thumb2 specific hazard recognizer to ensure the scheduler doesn't
change the instruction ordering in the IT block (since IT mask has been
finalized). It also ensures no other instructions can be scheduled between
instructions in the IT block.
This is not yet enabled.
llvm-svn: 106344
