of which that is hidden inside a separate function call) and helpfully
before building expensive transaction infrastructure. This will avoid
crashing when running CGP in a generic mode if we ever managed to hit
this case.
Note that I spent some time looking at alternatives. CGP is actually
used without a TM or TLI in order to do some target-independent testing.
Further, all of the neighboring optimization techniques actually have
some paths that are effective even in the absence of TLI so this seemed
the correct scope at which to check and bypass logic. It still isn't
clear that long-term support for missing TM/TLI is the right
cost/benefit tradeoff for CGP -- we seem to get relatively little for it
and the code is just littered with checks (and assumptions which
I suspect are still missing some checks).
This at least fixes the potential bug in this code spotted by
PVS-Studio, so we've got that going for us. ;]
llvm-svn: 285987
Summary:
Have MergeConsecutiveStores explicitly return information about the stores
that were merged, so that we can safely determine whether the starting
node has been freed.
Reviewers: chandlerc, bogner, niravd
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D25601
llvm-svn: 285916
2 new intrinsics covering AVX-512 compress/expand functionality.
This implementation includes syntax, DAG builder, operation lowering and tests.
Does not include: handling of illegal data types, codegen prepare pass and the cost model.
llvm-svn: 285876
Using a pattern similar to that of YamlIO, this allows
us to have a single codepath for translating codeview
records to and from serialized byte streams. The
current patch only hooks this up to the reading of
CodeView type records. A subsequent patch will hook
it up for writing of CodeView type records, and then a
third patch will hook up the reading and writing of
CodeView symbols.
Differential Revision: https://reviews.llvm.org/D26040
llvm-svn: 285836
Summary:
Currently PreferredLoopExit is set only in buildLoopChains, which is
never called if there are no MachineLoops.
MSan is currently broken by this:
http://lab.llvm.org:8011/builders/sanitizer-x86_64-linux-fast/builds/145/steps/check-llvm%20msan/logs/stdio
This is a naive fix to get things green again. iteratee: you may have a better fix.
This change will also mean PreferredLoopExit will not carry over if
buildCFGChains() is called a second time in runOnMachineFunction, this
appears to be the right thing.
Reviewers: bkramer, iteratee, echristo
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D26069
llvm-svn: 285757
It's likely if a conditional branch needs to be expanded, the following
unconditional branch will also need expansion. By expanding the
unconditional branch first, the conditional branch can be simply
inverted to jump over the inserted indirect branch block. If the
conditional branch is expanded first, it results in an additional
branch.
This avoids test regressions in future commits.
llvm-svn: 285722
This bug was exposed by using nsw/nuw for more aggressive folds in:
https://reviews.llvm.org/rL284844
The changes mimic the IR demanded bits logic in InstCombiner::SimplifyDemandedUseBits(),
but we can't just flip flag bits in the DAG; we have to create a new node that has the
bits cleared.
This should fix:
https://llvm.org/bugs/show_bug.cgi?id=30841
llvm-svn: 285656
DW_TAG_atomic_type was already included in Dwarf.defs and emitted correctly,
however Verifier didn't recognize it as valid.
Thus we introduce the following changes:
* Make DW_TAG_atomic_type valid tag for IR and DWARF (enabled only with -gdwarf-5)
* Add it to related docs
* Add DebugInfo tests
Differential Revision: https://reviews.llvm.org/D26144
llvm-svn: 285624
Currently computeKnownBits returns the common known zero/one bits for all elements of vector data, when we may only be interested in one/some of the elements.
This patch adds a DemandedElts argument that allows us to specify the elements we actually care about. The original computeKnownBits implementation calls with a DemandedElts demanding all elements to match current behaviour. Scalar types set this to 1.
The approach was found to be easier than trying to add a per-element known bits solution, for a similar usefulness given the combines where computeKnownBits is typically used.
I've only added support for a few opcodes so far (the ones that have proven straightforward to test), all others will default to demanding all elements but can be updated in due course.
DemandedElts support could similarly be added to computeKnownBitsForTargetNode in a future commit.
This looked like this had caused compile time regressions on some buildbots (and was reverted in rL285381), but appears to have just been a harmless bystander!
Differential Revision: https://reviews.llvm.org/D25691
llvm-svn: 285494
Instead of asserting that the shift count is != 0 we just bail out
as it's not profitable trying to optimize a node which will be
removed anyway.
Differential Revision: https://reviews.llvm.org/D26098
llvm-svn: 285480
When LivePhysRegs adds live-in registers, it recognizes ~0 as a special
lane mask indicating the entire register. If the lane mask is not ~0,
it will only add the subregisters that overlap the specified lane mask.
The problem is that if a live-in register does not have subregisters,
and the lane mask is not ~0, it will not be added to the live set.
(The given lane mask may simply be the lane mask of its register class.)
If a register does not have subregisters, add it to the live set if
the lane mask is non-zero.
Differential Revision: https://reviews.llvm.org/D26094
llvm-svn: 285440
TargetPassConfig::addMachinePasses() does some housekeeping first:
Handling the -print-machineinstrs flag and doing an initial printing
"After Instruction Selection". There is no reason for RegUsageInfoProp
to run before those two steps.
llvm-svn: 285422
There is a use after free bug in the existing code. Loop layout selects
a preferred exit block, and then lays out the loop. If this block is
removed during layout, it needs to be invalidated to prevent a use after
free.
llvm-svn: 285348
Summary:
Found when running Valgrind.
This removes two unnecessary assignments when using
AttrBuilder::removeAttribute.
AttrBuilder::removeAttribute returns a reference to the object.
As the LHSes were the same as the callees, the assignments
resulted in memcpy calls where dst = src.
Commited on behalf-of: dstenb (David Stenberg)
Reviewers: mkuper, rnk
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D25460
llvm-svn: 285298
Currently computeKnownBits returns the common known zero/one bits for all elements of vector data, when we may only be interested in one/some of the elements.
This patch adds a DemandedElts argument that allows us to specify the elements we actually care about. The original computeKnownBits implementation calls with a DemandedElts demanding all elements to match current behaviour. Scalar types set this to 1.
The approach was found to be easier than trying to add a per-element known bits solution, for a similar usefulness given the combines where computeKnownBits is typically used.
I've only added support for a few opcodes so far (the ones that have proven straightforward to test), all others will default to demanding all elements but can be updated in due course.
DemandedElts support could similarly be added to computeKnownBitsForTargetNode in a future commit.
Differential Revision: https://reviews.llvm.org/D25691
llvm-svn: 285296
Change type of some missed DebugInfo-related alignment variables,
that are still uint64_t, to uint32_t.
Original change introduced in r284482.
llvm-svn: 285242
This patch ensures that if a floating point vector operand is legalized by
expanding, it is legalized through the stack rather than by calling
DAGTypeLegalizer::IntegerToVector which will cause a failure since the operand
is a non-integer type.
This fixes PR 30715.
llvm-svn: 285231
This reapplies revision 285093. Original commit message:
The branch folding pass tail merges blocks into a common-tail. However, the
tail retains the debug information from one of the original inputs to the
merge (chosen randomly). This is a problem for sampled-based PGO, as hits
on the common-tail will be attributed to whichever block was chosen,
irrespective of which path was actually taken to the common-tail.
This patch fixes the issue by nulling the debug location for the common-tail.
Differential Revision: https://reviews.llvm.org/D25742
llvm-svn: 285212
This finds all of the references to a frame index in a function, and
sorts by the offset. If multiple instructions use the same offset,
nothing was breaking the tie for sorting.
This avoids the test failures the reverted r282999 introduced.
llvm-svn: 285201
Summary:
AMDGPU will need this one i16 is added as a legal type. This is tested by:
test/CodeGen/AMDGPU/sdiv.ll
test/CodeGen/AMDGPU/sdivrem24.ll
test/CodeGen/AMDGPU/udiv.ll
test/CodeGen/AMDGPU/udivrem24.ll
Reviewers: bogner, efriedma
Subscribers: efriedma, wdng, llvm-commits
Differential Revision: https://reviews.llvm.org/D25699
llvm-svn: 285199
* Assume that clang passes non-zero alignment value to DIBuilder
only in case when it was forced by C++11 'alignas', C11 '_Alignas'
or compiler attribute '__attribute__((aligned (N)))'.
* Emit DW_AT_alignment if alignment is specified for type/object.
Differential Revision: https://reviews.llvm.org/D24425
llvm-svn: 285189
* Assume that clang passes non-zero alignment value to DIBuilder
only in case when it was forced by C++11 'alignas', C11 '_Alignas'
or compiler attribute '__attribute__((aligned (N)))'.
* Emit DW_AT_alignment if alignment is specified for type/object.
Differential Revision: https://reviews.llvm.org/D24425
llvm-svn: 285181
Summary:
Fixes PR28281.
MSVC lists indirect virtual base classes in the field list of a class,
using LF_IVBCLASS records. This change makes LLVM emit such records
when processing DW_TAG_inheritance tags with the DIFlagVirtual and
(newly introduced) DIFlagIndirect tags.
Reviewers: rnk, ruiu, zturner
Differential Revision: https://reviews.llvm.org/D25578
llvm-svn: 285130
This reverts r285093, as it caused unexpected buildbot failures on
clang-ppc64le-linux, clang-ppc64be-linux, clang-ppc64be-linux-multistage
and clang-ppc64be-linux-lnt. Failing test ubsan/TestCases/TypeCheck/vptr.cpp.
llvm-svn: 285110
Add an option to allow easier experimentation by target maintainers with the
minimum number of entries to create jump tables. Also clarify the name of
the other existing option governing the creation of jump tables.
Differential revision: https://reviews.llvm.org/D25883
llvm-svn: 285104
When there's a tie between partitionings of jump tables, consider also cases
that result in no jump tables, but in one or a few cases. The motivation is
that many contemporary processors typically perform case switches fairly
quickly.
Differential revision: https://reviews.llvm.org/D25212
llvm-svn: 285099
The branch folding pass tail merges blocks into a common-tail. However, the
tail retains the debug information from one of the original inputs to the
merge (chosen randomly). This is a problem for sampled-based PGO, as hits
on the common-tail will be attributed to whichever block was chosen,
irrespective of which path was actually taken to the common-tail.
This patch fixes the issue by nulling the debug location for the common-tail.
Differential Revision: https://reviews.llvm.org/D25742
llvm-svn: 285093
Summary:
Do *not* perform combines such as:
vector_shuffle<4,1,2,3>(build_vector(Ud, C0, C1 C2), scalar_to_vector(X))
->
build_vector(X, C0, C1, C2)
Keeping the shuffle allows lowering the constant build_vector to a materialized
constant vector (such as a vector-load from the constant-pool or some other idiom).
Reviewers: delena, igorb, spatel, mkuper, andreadb, RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D25524
llvm-svn: 285063
This is a function to go backwards in a block to find the first
instruction in a bundle, so iterator is a more natural choice for
parameter/return rather than a reference to a MachineInstruction.
llvm-svn: 285051
Passing a MachineFunction as argument is more natural and avoids an
unnecessary round-trip through the logic determining the correct
Subtarget because MachineFunction already has a reference anyway.
llvm-svn: 285039
(Const)?MIOperands is equivalent to the C++ style
MachineInstr::mop_iterator. Use the latter for consistency except for a
few callers of MIOperands::analyzePhysReg().
llvm-svn: 285029
These functions are about classifying a global which will actually be
emitted, so it does not make sense for them to take a GlobalValue which may
for example be an alias.
Change the Mach-O object writer and the Hexagon, Lanai and MIPS backends to
look through aliases before using TargetLoweringObjectFile interfaces. These
are functional changes but all appear to be bug fixes.
Differential Revision: https://reviews.llvm.org/D25917
llvm-svn: 285006
Summary: With MSVC 2013 and GCC < 4.8 gone, we can use the "constexpr" keyword.
Reviewers: bkramer, mehdi_amini
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D25901
llvm-svn: 284947
0 - X --> 0, if the sub is NUW
0 - X --> 0, if X is 0 or the minimum signed value and the sub is NSW
0 - X --> X, if X is 0 or the minimum signed value
This is the DAG equivalent of:
https://reviews.llvm.org/rL284649
plus the fold for the NUW case which already existed in InstSimplify.
Note that we miss a vector fold because of a deficiency in the DAG version of
computeKnownBits().
llvm-svn: 284844
Because we're just 'or-ing' these 2 variables later in the code, I
don't think there's a logical bug here, but of course the string with
"no size" is the one that should have the size suffix stripped off.
llvm-svn: 284826
As discussed in D24815, let's start the process of killing off the broken fast-math global
state housed in TargetOptions and eliminate the need for function-level fast-math attributes.
Here we enable two similar folds that are possible when we don't care about signed-zero:
fadd nsz x, 0 --> x
fsub nsz 0, x --> -x
Note that although the test cases include a 'sin' function call, I'm side-stepping the
FMF-on-calls question (and lack of support in the DAG) for now. It's not needed for these
tests - isNegatibleForFree/GetNegatedExpression just look through a ISD::FSIN node.
Also, when we create an FNEG node and propagate the Flags of the FSUB to it, this doesn't
actually do anything today because Flags are silently dropped for any node that is not a
binary operator.
Differential Revision: https://reviews.llvm.org/D25297
llvm-svn: 284824
Summary:
The original heuristic to break critical edge during machine sink is relatively conservertive: when there is only one instruction sinkable to the critical edge, it is likely that the machine sink pass will not break the critical edge. This leads to many speculative instructions executed at runtime. However, with profile info, we could model the splitting benefits: if the critical edge has 50% taken rate, it would always be beneficial to split the critical edge to avoid the speculated runtime instructions. This patch uses profile to guide critical edge splitting in machine sink pass.
The performance impact on speccpu2006 on Intel sandybridge machines:
spec/2006/fp/C++/444.namd 25.3 +0.26%
spec/2006/fp/C++/447.dealII 45.96 -0.10%
spec/2006/fp/C++/450.soplex 41.97 +1.49%
spec/2006/fp/C++/453.povray 36.83 -0.96%
spec/2006/fp/C/433.milc 23.81 +0.32%
spec/2006/fp/C/470.lbm 41.17 +0.34%
spec/2006/fp/C/482.sphinx3 48.13 +0.69%
spec/2006/int/C++/471.omnetpp 22.45 +3.25%
spec/2006/int/C++/473.astar 21.35 -2.06%
spec/2006/int/C++/483.xalancbmk 36.02 -2.39%
spec/2006/int/C/400.perlbench 33.7 -0.17%
spec/2006/int/C/401.bzip2 22.9 +0.52%
spec/2006/int/C/403.gcc 32.42 -0.54%
spec/2006/int/C/429.mcf 39.59 +0.19%
spec/2006/int/C/445.gobmk 26.98 -0.00%
spec/2006/int/C/456.hmmer 24.52 -0.18%
spec/2006/int/C/458.sjeng 28.26 +0.02%
spec/2006/int/C/462.libquantum 55.44 +3.74%
spec/2006/int/C/464.h264ref 46.67 -0.39%
geometric mean +0.20%
Manually checked 473 and 471 to verify the diff is in the noise range.
Reviewers: rengolin, davidxl
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D24818
llvm-svn: 284757
Summary:
While promoting *_EXTEND_VECTOR_INREG nodes whose inputs are already
promoted, perform the appropriate sign extension for the promoted node
before doing the *_EXTEND_VECTOR_INREG operation. If not, the undefined
high-order bits of the promoted operand may (a) be garbage inc ase of
zext) or (b) contribute the wrong sign-bit (in case of sext)
Updated the promote-vec3.ll test after this change. The diff shows
explicit zeroing in case of zext and intermediate sign extension in case
of sext.
Reviewers: RKSimon
Subscribers: llvm-commits, srhines
Differential Revision: https://reviews.llvm.org/D25790
llvm-svn: 284752
This is a retry of r284495 which was reverted at r284513 due to use-after-scope bugs
caused by faulty usage of StringRef.
This version also renames a pair of functions:
getRecipEstimateDivEnabled()
getRecipEstimateSqrtEnabled()
as suggested by Eric Christopher.
original commit msg:
[Target] remove TargetRecip class; move reciprocal estimate isel functionality to TargetLowering
This is a follow-up to https://reviews.llvm.org/D24816 - where we changed reciprocal estimates to be function attributes
rather than TargetOptions.
This patch is intended to be a structural, but not functional change. By moving all of the
TargetRecip functionality into TargetLowering, we can remove all of the reciprocal estimate
state, shield the callers from the string format implementation, and simplify/localize the
logic needed for a target to enable this.
If a function has a "reciprocal-estimates" attribute, those settings may override the target's
default reciprocal preferences for whatever operation and data type we're trying to optimize.
If there's no attribute string or specific setting for the op/type pair, just use the target
default settings.
As noted earlier, a better solution would be to move the reciprocal estimate settings to IR
instructions and SDNodes rather than function attributes, but that's a multi-step job that
requires infrastructure improvements. I intend to work on that, but it's not clear how long
it will take to get all the pieces in place.
Differential Revision: https://reviews.llvm.org/D25440
llvm-svn: 284746
- Add alignment attribute to DIVariable family
- Modify bitcode format to match new DIVariable representation
- Update tests to match these changes (also add bitcode upgrade test)
- Expect that frontend passes non-zero align value only when it is not default
(was forcibly aligned by alignas()/_Alignas()/__atribute__(aligned())
Differential Revision: https://reviews.llvm.org/D25073
llvm-svn: 284678
This code crashed on funclet-style EH instructions such as catchpad,
catchswitch, and cleanuppad. Just treat all EH pad instructions
equivalently and avoid merging the globals they reference through any
use.
llvm-svn: 284633
Use mask and negate for legalization of i1 source type with SIGN_EXTEND_INREG.
With the mask, this should be no worse than 2 shifts. The mask can be eliminated
in some cases, so that should be better than 2 shifts.
This change exposed some missing folds related to negation:
https://reviews.llvm.org/rL284239https://reviews.llvm.org/rL284395
There may be others, so please let me know if you see any regressions.
Differential Revision: https://reviews.llvm.org/D25485
llvm-svn: 284611
This will get the same ConstantSDNode scalar or vector splat value as the current separate dyn_cast<ConstantSDNode> / isVector() approach.
llvm-svn: 284578
Summary:
The original heuristic to break critical edge during machine sink is relatively conservertive: when there is only one instruction sinkable to the critical edge, it is likely that the machine sink pass will not break the critical edge. This leads to many speculative instructions executed at runtime. However, with profile info, we could model the splitting benefits: if the critical edge has 50% taken rate, it would always be beneficial to split the critical edge to avoid the speculated runtime instructions. This patch uses profile to guide critical edge splitting in machine sink pass.
The performance impact on speccpu2006 on Intel sandybridge machines:
spec/2006/fp/C++/444.namd 25.3 +0.26%
spec/2006/fp/C++/447.dealII 45.96 -0.10%
spec/2006/fp/C++/450.soplex 41.97 +1.49%
spec/2006/fp/C++/453.povray 36.83 -0.96%
spec/2006/fp/C/433.milc 23.81 +0.32%
spec/2006/fp/C/470.lbm 41.17 +0.34%
spec/2006/fp/C/482.sphinx3 48.13 +0.69%
spec/2006/int/C++/471.omnetpp 22.45 +3.25%
spec/2006/int/C++/473.astar 21.35 -2.06%
spec/2006/int/C++/483.xalancbmk 36.02 -2.39%
spec/2006/int/C/400.perlbench 33.7 -0.17%
spec/2006/int/C/401.bzip2 22.9 +0.52%
spec/2006/int/C/403.gcc 32.42 -0.54%
spec/2006/int/C/429.mcf 39.59 +0.19%
spec/2006/int/C/445.gobmk 26.98 -0.00%
spec/2006/int/C/456.hmmer 24.52 -0.18%
spec/2006/int/C/458.sjeng 28.26 +0.02%
spec/2006/int/C/462.libquantum 55.44 +3.74%
spec/2006/int/C/464.h264ref 46.67 -0.39%
geometric mean +0.20%
Manually checked 473 and 471 to verify the diff is in the noise range.
Reviewers: rengolin, davidxl
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D24818
llvm-svn: 284545
Summary:
The original heuristic to break critical edge during machine sink is relatively conservertive: when there is only one instruction sinkable to the critical edge, it is likely that the machine sink pass will not break the critical edge. This leads to many speculative instructions executed at runtime. However, with profile info, we could model the splitting benefits: if the critical edge has 50% taken rate, it would always be beneficial to split the critical edge to avoid the speculated runtime instructions. This patch uses profile to guide critical edge splitting in machine sink pass.
The performance impact on speccpu2006 on Intel sandybridge machines:
spec/2006/fp/C++/444.namd 25.3 +0.26%
spec/2006/fp/C++/447.dealII 45.96 -0.10%
spec/2006/fp/C++/450.soplex 41.97 +1.49%
spec/2006/fp/C++/453.povray 36.83 -0.96%
spec/2006/fp/C/433.milc 23.81 +0.32%
spec/2006/fp/C/470.lbm 41.17 +0.34%
spec/2006/fp/C/482.sphinx3 48.13 +0.69%
spec/2006/int/C++/471.omnetpp 22.45 +3.25%
spec/2006/int/C++/473.astar 21.35 -2.06%
spec/2006/int/C++/483.xalancbmk 36.02 -2.39%
spec/2006/int/C/400.perlbench 33.7 -0.17%
spec/2006/int/C/401.bzip2 22.9 +0.52%
spec/2006/int/C/403.gcc 32.42 -0.54%
spec/2006/int/C/429.mcf 39.59 +0.19%
spec/2006/int/C/445.gobmk 26.98 -0.00%
spec/2006/int/C/456.hmmer 24.52 -0.18%
spec/2006/int/C/458.sjeng 28.26 +0.02%
spec/2006/int/C/462.libquantum 55.44 +3.74%
spec/2006/int/C/464.h264ref 46.67 -0.39%
geometric mean +0.20%
Manually checked 473 and 471 to verify the diff is in the noise range.
Reviewers: rengolin, davidxl
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D24818
llvm-svn: 284541
Summary:
The original implementation is in r261607, which was reverted in r269726 to accomendate the ProfileSummaryInfo analysis pass. The new implementation:
1. add a new metadata for function section prefix
2. query against ProfileSummaryInfo in CGP to set the correct section prefix for each function
3. output the section prefix set by CGP
Reviewers: davidxl, eraman
Subscribers: vsk, llvm-commits
Differential Revision: https://reviews.llvm.org/D24989
llvm-svn: 284533
This is a follow-up to D24816 - where we changed reciprocal estimates to be function attributes
rather than TargetOptions.
This patch is intended to be a structural, but not functional change. By moving all of the
TargetRecip functionality into TargetLowering, we can remove all of the reciprocal estimate
state, shield the callers from the string format implementation, and simplify/localize the
logic needed for a target to enable this.
If a function has a "reciprocal-estimates" attribute, those settings may override the target's
default reciprocal preferences for whatever operation and data type we're trying to optimize.
If there's no attribute string or specific setting for the op/type pair, just use the target
default settings.
As noted earlier, a better solution would be to move the reciprocal estimate settings to IR
instructions and SDNodes rather than function attributes, but that's a multi-step job that
requires infrastructure improvements. I intend to work on that, but it's not clear how long
it will take to get all the pieces in place.
Differential Revision: https://reviews.llvm.org/D25440
llvm-svn: 284495
In futher patches we shall have alignment field added to DIVariable family
and switching from uint64_t to uint32_t will save 4 bytes per variable.
Differential Revision: https://reviews.llvm.org/D25620
llvm-svn: 284482
This patch adds simplified support for tail calls on ARM with XRay instrumentation.
Known issue: compiled with generic flags: `-O3 -g -fxray-instrument -Wall
-std=c++14 -ffunction-sections -fdata-sections` (this list doesn't include my
specific flags like --target=armv7-linux-gnueabihf etc.), the following program
#include <cstdio>
#include <cassert>
#include <xray/xray_interface.h>
[[clang::xray_always_instrument]] void __attribute__ ((noinline)) fC() {
std::printf("In fC()\n");
}
[[clang::xray_always_instrument]] void __attribute__ ((noinline)) fB() {
std::printf("In fB()\n");
fC();
}
[[clang::xray_always_instrument]] void __attribute__ ((noinline)) fA() {
std::printf("In fA()\n");
fB();
}
// Avoid infinite recursion in case the logging function is instrumented (so calls logging
// function again).
[[clang::xray_never_instrument]] void simplyPrint(int32_t functionId, XRayEntryType xret)
{
printf("XRay: functionId=%d type=%d.\n", int(functionId), int(xret));
}
int main(int argc, char* argv[]) {
__xray_set_handler(simplyPrint);
printf("Patching...\n");
__xray_patch();
fA();
printf("Unpatching...\n");
__xray_unpatch();
fA();
return 0;
}
gives the following output:
Patching...
XRay: functionId=3 type=0.
In fA()
XRay: functionId=3 type=1.
XRay: functionId=2 type=0.
In fB()
XRay: functionId=2 type=1.
XRay: functionId=1 type=0.
XRay: functionId=1 type=1.
In fC()
Unpatching...
In fA()
In fB()
In fC()
So for function fC() the exit sled seems to be called too much before function
exit: before printing In fC().
Debugging shows that the above happens because printf from fC is also called as
a tail call. So first the exit sled of fC is executed, and only then printf is
jumped into. So it seems we can't do anything about this with the current
approach (i.e. within the simplification described in
https://reviews.llvm.org/D23988 ).
Differential Revision: https://reviews.llvm.org/D25030
llvm-svn: 284456
Summary:
There are differences in codegen between Linux and Windows due to:
1. Using std::sort which uses quicksort which is a non-stable sort.
2. Iterating over Set data structure where the iteration order is
non deterministic.
Reviewers: arsenm, grosbach, junbuml, zinob, MatzeB
Subscribers: MatzeB, wdng
Differential Revision: https://reviews.llvm.org/D25695
llvm-svn: 284441