Summary:
This is needed to implemented the same approach as lld (implemented in r338434)
for how to handling symbols that can be generated by LTO code generator
but not present in the symbol table for linker that uses legacy C APIs.
libLTO is in charge of providing the list of symbols. Linker is in
charge of implementing the eager loading from static libraries using
the list of symbols.
rdar://problem/52853974
Reviewers: tejohnson, bd1976llvm, deadalnix, espindola
Reviewed By: tejohnson
Subscribers: emaste, arichardson, hiraditya, MaskRay, dang, kledzik, mehdi_amini, inglorion, jkorous, dexonsmith, ributzka, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67568
llvm-svn: 372021
This fixes relocations against __profd_ symbols in discarded sections,
which is PR41380.
In general, instrumentation happens very early, and optimization and
inlining happens afterwards. The counters for a function are calculated
early, and after inlining, counters for an inlined function may be
widely referenced by other functions.
For C++ inline functions of all kinds (linkonce_odr &
available_externally mainly), instr profiling wants to deduplicate these
__profc_ and __profd_ globals. Otherwise the binary would be quite
large.
I made __profd_ and __profc_ comdat in r355044, but I chose to make
__profd_ internal. At the time, I was only dealing with coverage, and in
that case, none of the instrumentation needs to reference __profd_.
However, if you use PGO, then instrumentation passes add calls to
__llvm_profile_instrument_range which reference __profd_ globals. The
solution is to make these globals externally visible by using
linkonce_odr linkage for data as was done for counters.
This is safe because PGO adds a CFG hash to the names of the data and
counter globals, so if different TUs have different globals, they will
get different data and counter arrays.
Reviewers: xur, hans
Differential Revision: https://reviews.llvm.org/D67579
llvm-svn: 372020
The adds some very basic folding of PREDICATE_CASTS, removing cases when they
are chained together. These would already be removed eventually, as these are
lowered to copies. This just allows it to happen earlier, which can help other
simplifications.
Differential Revision: https://reviews.llvm.org/D67591
llvm-svn: 372012
Summary:
Previously, if the threshold was 2, we were willing to speculatively
execute 2 cheap instructions in both basic blocks (thus we were willing
to speculatively execute cost = 4), but weren't willing to speculate
when one BB had 3 instructions and other one had no instructions,
even thought that would have total cost of 3.
This looks inconsistent to me.
I don't think `cmov`-like instructions will start executing
until both of it's inputs are available: https://godbolt.org/z/zgHePf
So i don't see why the existing behavior is the correct one.
Also, let's add it's own `cl::opt` for this threshold,
with default=4, so it is not stricter than the previous threshold:
will allow to fold when there are 2 BB's each with cost=2.
And since the logic has changed, it will also allow to fold when
one BB has cost=3 and other cost=1, or there is only one BB with cost=4.
This is an alternative solution to D65148:
This fix is mainly motivated by `signbit-like-value-extension.ll` test.
That pattern comes up in JPEG decoding, see e.g.
`Figure F.12 – Extending the sign bit of a decoded value in V`
of `ITU T.81` (JPEG specification).
That branch is not predictable, and it is within the innermost loop,
so the fact that that pattern ends up being stuck with a branch
instead of `select` (i.e. `CMOV` for x86) is unlikely to be beneficial.
This has great results on the final assembly (vanilla test-suite + RawSpeed): (metric pass - D67240)
| metric | old | new | delta | % |
| x86-mi-counting.NumMachineFunctions | 37720 | 37721 | 1 | 0.00% |
| x86-mi-counting.NumMachineBasicBlocks | 773545 | 771181 | -2364 | -0.31% |
| x86-mi-counting.NumMachineInstructions | 7488843 | 7486442 | -2401 | -0.03% |
| x86-mi-counting.NumUncondBR | 135770 | 135543 | -227 | -0.17% |
| x86-mi-counting.NumCondBR | 423753 | 422187 | -1566 | -0.37% |
| x86-mi-counting.NumCMOV | 24815 | 25731 | 916 | 3.69% |
| x86-mi-counting.NumVecBlend | 17 | 17 | 0 | 0.00% |
We significantly decrease basic block count, notably decrease instruction count,
significantly decrease branch count and very significantly increase `cmov` count.
Performance-wise, unsurprisingly, this has great effect on
target RawSpeed benchmark. I'm seeing 5 **major** improvements:
```
Benchmark Time CPU Time Old Time New CPU Old CPU New
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Samsung/NX3000/_3184416.SRW/threads:8/process_time/real_time_pvalue 0.0000 0.0000 U Test, Repetitions: 49 vs 49
Samsung/NX3000/_3184416.SRW/threads:8/process_time/real_time_mean -0.3064 -0.3064 226.9913 157.4452 226.9800 157.4384
Samsung/NX3000/_3184416.SRW/threads:8/process_time/real_time_median -0.3057 -0.3057 226.8407 157.4926 226.8282 157.4828
Samsung/NX3000/_3184416.SRW/threads:8/process_time/real_time_stddev -0.4985 -0.4954 0.3051 0.1530 0.3040 0.1534
Kodak/DCS760C/86L57188.DCR/threads:8/process_time/real_time_pvalue 0.0000 0.0000 U Test, Repetitions: 49 vs 49
Kodak/DCS760C/86L57188.DCR/threads:8/process_time/real_time_mean -0.1747 -0.1747 80.4787 66.4227 80.4771 66.4146
Kodak/DCS760C/86L57188.DCR/threads:8/process_time/real_time_median -0.1742 -0.1743 80.4686 66.4542 80.4690 66.4436
Kodak/DCS760C/86L57188.DCR/threads:8/process_time/real_time_stddev +0.6089 +0.5797 0.0670 0.1078 0.0673 0.1062
Sony/DSLR-A230/DSC08026.ARW/threads:8/process_time/real_time_pvalue 0.0000 0.0000 U Test, Repetitions: 49 vs 49
Sony/DSLR-A230/DSC08026.ARW/threads:8/process_time/real_time_mean -0.1598 -0.1598 171.6996 144.2575 171.6915 144.2538
Sony/DSLR-A230/DSC08026.ARW/threads:8/process_time/real_time_median -0.1598 -0.1597 171.7109 144.2755 171.7018 144.2766
Sony/DSLR-A230/DSC08026.ARW/threads:8/process_time/real_time_stddev +0.4024 +0.3850 0.0847 0.1187 0.0848 0.1175
Canon/EOS 77D/IMG_4049.CR2/threads:8/process_time/real_time_pvalue 0.0000 0.0000 U Test, Repetitions: 49 vs 49
Canon/EOS 77D/IMG_4049.CR2/threads:8/process_time/real_time_mean -0.0550 -0.0551 280.3046 264.8800 280.3017 264.8559
Canon/EOS 77D/IMG_4049.CR2/threads:8/process_time/real_time_median -0.0554 -0.0554 280.2628 264.7360 280.2574 264.7297
Canon/EOS 77D/IMG_4049.CR2/threads:8/process_time/real_time_stddev +0.7005 +0.7041 0.2779 0.4725 0.2775 0.4729
Canon/EOS 5DS/2K4A9929.CR2/threads:8/process_time/real_time_pvalue 0.0000 0.0000 U Test, Repetitions: 49 vs 49
Canon/EOS 5DS/2K4A9929.CR2/threads:8/process_time/real_time_mean -0.0354 -0.0355 316.7396 305.5208 316.7342 305.4890
Canon/EOS 5DS/2K4A9929.CR2/threads:8/process_time/real_time_median -0.0354 -0.0356 316.6969 305.4798 316.6917 305.4324
Canon/EOS 5DS/2K4A9929.CR2/threads:8/process_time/real_time_stddev +0.0493 +0.0330 0.3562 0.3737 0.3563 0.3681
```
That being said, it's always best-effort, so there will likely
be cases where this worsens things.
Reviewers: efriedma, craig.topper, dmgreen, jmolloy, fhahn, Carrot, hfinkel, chandlerc
Reviewed By: jmolloy
Subscribers: xbolva00, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67318
llvm-svn: 372009
Related folds were added in:
rL125734
...the code comment about register pressure is discussed in
more detail in:
https://bugs.llvm.org/show_bug.cgi?id=2698
But 10 years later, perf testing bzip2 with this change now
shows a slight (0.2% average) improvement on Haswell although
that's probably within test noise.
Given that this is IR canonicalization, we shouldn't be worried
about register pressure though; the backend should be able to
adjust for that as needed.
This is part of solving PR43310 the theoretically right way:
https://bugs.llvm.org/show_bug.cgi?id=43310
...ie, if we don't cripple basic transforms, then we won't
need to add special-case code to detect larger patterns.
rL371940 and rL371981 are related patches in this series.
llvm-svn: 372007
Lower CTTZ on MVE using VBRSR and VCLS which will reverse the bits and
count the leading zeros, equivalent to a count trailing zeros (CTTZ).
llvm-svn: 372000
The static analyzer is warning about potential null dereferences of dyn_cast<> results - in these cases we can safely use cast<> directly as we know that these cases should all be the correct type, which is why its working atm and anyway cast<> will assert if they aren't.
llvm-svn: 371998
Now that the vectorizer can do tail-folding (rL367592), and the ARM backend
understands MVE masked loads/stores (rL371932), it's time to add the MVE
tail-folding equivalent of the X86 tests that I added.
llvm-svn: 371996
Since MBB was split *before* MI, the MI(s) will reside in JoinMBB (MBB) at
the point of erasing them, so calling StartMBB->erase() is actually wrong,
although it is "working" by all appearances.
Review: Ulrich Weigand
llvm-svn: 371995
Summary:
This allows enabling useaa on the command-line and will allow enabling the
feature on a per-CPU basis where benchmarking shows improvements.
This is modelled after the ARM/AArch64 target.
Reviewers: RKSimon, andreadb, craig.topper
Subscribers: javed.absar, kristof.beyls, hiraditya, ychen, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67266
llvm-svn: 371989
Previously we only had a stub document.
Reviewed by: serge-sans-paille, MaskRay
Differential Revision: https://reviews.llvm.org/D67555
llvm-svn: 371983
MVE has VPT instructions, which perform the duties of both a VCMP and a VPST in
a single instruction, performing the compare and starting the VPT block in one.
This teaches the MVEVPTBlockPass to fold them, searching back through the
basicblock for a valid VCMP and creating the VPT from its operands.
There are some changes to the VPT instructions to accommodate this, altering
the order of the operands to match the VCMP better, and changing P0 register
defs to be VPR defs, as is used in other places.
Differential Revision: https://reviews.llvm.org/D66577
llvm-svn: 371982
This fold and several others were added in:
rL125734 <https://reviews.llvm.org/rL125734>
...with no explanation for the one-use checks other than the code
comments about register pressure.
Given that this is IR canonicalization, we shouldn't be worried
about register pressure though; the backend should be able to
adjust for that as needed.
This is part of solving PR43310 the theoretically right way:
https://bugs.llvm.org/show_bug.cgi?id=43310
...ie, if we don't cripple basic transforms, then we won't
need to add special-case code to detect larger patterns.
rL371940 is a related patch in this series.
llvm-svn: 371981
This blob was written before match() existed, so it
could probably be reduced significantly.
But I suspect it isn't well tested, so tests would have
to be added to reduce risk from logic changes.
llvm-svn: 371978
The static analyzer is warning about a potential null dereference of the cast_or_null result, I've split the cast_or_null check from the ->getUnderlyingInstr() call to avoid this, but it appears that we weren't seeing any null pointers in the dumped bundles in the first place.
llvm-svn: 371975
The static analyzer is warning about potential null dereferences of dyn_cast<> results - in these cases we can safely use cast<> directly as we know that these cases should all be the correct type, which is why its working atm and anyway cast<> will assert if they aren't.
llvm-svn: 371973
Summary:
Adds the following inline asm constraints for SVE:
- Upl: One of the low eight SVE predicate registers, P0 to P7 inclusive
- Upa: SVE predicate register with full range, P0 to P15
Reviewers: t.p.northover, sdesmalen, rovka, momchil.velikov, cameron.mcinally, greened, rengolin
Reviewed By: rovka
Subscribers: javed.absar, tschuett, rkruppe, psnobl, cfe-commits, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66524
llvm-svn: 371967
After our previous machinecombiner exercises (rL371321, rL371818, rL371833), we
were still missing a few FP16 FMA patterns.
Differential Revision: https://reviews.llvm.org/D67576
llvm-svn: 371960
SystemZExpandPseudo:s only job was to expand LOCRMux instructions into jump
sequences. This needs to be done if expandLOCRPseudo() or expandSELRPseudo()
fails to find a legal opcode (all registers "high" or "low"). This task has
now been moved to SystemZPostRewrite while removing the SystemZExpandPseudo
pass.
It is in fact preferred to expand these pseudos directly after register
allocation in SystemZPostRewrite since the hinted register combinations are
then not subject to later optimizations.
Review: Ulrich Weigand
https://reviews.llvm.org/D67432
llvm-svn: 371959
D53362 gives a prototype heap-to-stack conversion pass. With addition of new attributes in the attributor, this can now be revisted and improved. This will place it in the Attributor to make it easier to use new attributes (eg. nofree, nosync, willreturn, etc.) and other attributor features.
Reviewers: jdoerfert, uenoku, hfinkel, efriedma
Subscribers: lebedev.ri, xbolva00, hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D65408
llvm-svn: 371942
This fold and several others were added in:
rL125734
...with no explanation for the one-use checks other than the code
comments about register pressure.
Given that this is IR canonicalization, we shouldn't be worried
about register pressure though; the backend should be able to
adjust for that as needed.
There are similar checks as noted with the TODO comments. I'm
hoping to remove those restrictions too, but if any of these
does cause a regression, it should be easier to correct by making
small, individual commits.
This is part of solving PR43310 the theoretically right way:
https://bugs.llvm.org/show_bug.cgi?id=43310
...ie, if we don't cripple basic transforms, then we won't
need to add special-case code to detect larger patterns.
llvm-svn: 371940
