Summary:
...loop after the last iteration.
This is really hard to do correctly. The core problem is that we need to
model liveness through the induction PHIs from iteration to iteration in
order to get the correct results, and we need to correctly de-duplicate
the common subgraphs of instructions feeding some subset of the
induction PHIs. All of this can be driven either from a side effect at
some iteration or from the loop values used after the loop finishes.
This patch implements this by storing the forward-propagating analysis
of each instruction in a cache to recall whether it was free and whether
it has become live and thus counted toward the total unroll cost. Then,
at each sink for a value in the loop, we recursively walk back through
every value that feeds the sink, including looping back through the
iterations as needed, until we have marked the entire input graph as
live. Because we cache this, we never visit instructions more than twice
-- once when we analyze them and put them into the cache, and once when
we count their cost towards the unrolled loop. Also, because the cache
is only two bits and because we are dealing with relatively small
iteration counts, we can store all of this very densely in memory to
avoid this from becoming an excessively slow analysis.
The code here is still pretty gross. I would appreciate suggestions
about better ways to factor or split this up, I've stared too long at
the algorithmic side to really have a good sense of what the design
should probably look at.
Also, it might seem like we should do all of this bottom-up, but I think
that is a red herring. Specifically, the simplification power is *much*
greater working top-down. We can forward propagate very effectively,
even across strange and interesting recurrances around the backedge.
Because we use data to propagate, this doesn't cause a state space
explosion. Doing this level of constant folding, etc, would be very
expensive to do bottom-up because it wouldn't be until the last moment
that you could collapse everything. The current solution is essentially
a top-down simplification with a bottom-up cost accounting which seems
to get the best of both worlds. It makes the simplification incremental
and powerful while leaving everything dead until we *know* it is needed.
Finally, a core property of this approach is its *monotonicity*. At all
times, the current UnrolledCost is a conservatively low estimate. This
ensures that we will never early-exit from the analysis due to exceeding
a threshold when if we had continued, the cost would have gone back
below the threshold. These kinds of bugs can cause incredibly hard to
track down random changes to behavior.
We could use a techinque similar (but much simpler) within the inliner
as well to avoid considering speculated code in the inline cost.
Reviewers: chandlerc
Subscribers: sanjoy, mzolotukhin, llvm-commits
Differential Revision: http://reviews.llvm.org/D11758
llvm-svn: 269388
Summary:
Currently we consider such instructions as simplified, which is incorrect,
because if their user isn't simplified, we can't actually simplify them too.
This biases our estimates of profitability: for instance the analyzer expects
much more gains from unrolling memcpy loops than there actually are.
Reviewers: hfinkel, chandlerc
Subscribers: mzolotukhin, llvm-commits
Differential Revision: http://reviews.llvm.org/D17365
llvm-svn: 269387
Ported DA to the new PM by splitting the former DependenceAnalysis Pass
into a DependenceInfo result type and DependenceAnalysisWrapperPass type
and adding a new PM-style DependenceAnalysis analysis pass returning the
DependenceInfo.
Patch by Philip Pfaffe, most of the review by Justin.
Differential Revision: http://reviews.llvm.org/D18834
llvm-svn: 269370
SCEVExpander::replaceCongruentIVs assumes the backedge value of an
SCEV-analysable PHI to always be an instruction, when this is not
necessarily true. For now address this by bailing out of the
optimization if the backedge value of the PHI is a non-Instruction.
llvm-svn: 269213
`SCEVExpander::replaceCongruentIVs` bypasses `hoistIVInc` if both the
original and the isomorphic increments are PHI nodes. Doing this can
break SSA if the isomorphic increment is not dominated by the original
increment. Get rid of the bypass, and let `hoistIVInc` do the right
thing.
Fixes PR27232 (compile time crash/hang).
llvm-svn: 269212
... for AddRec's in loops for which SCEV is unable to compute a max
tripcount. This is not a problem for "normal" loops[0] that don't have
guards or assumes, but helps in cases where we have guards or assumes in
the loop that can be used to constrain incoming values over the backedge.
This partially fixes PR27691 (we still don't handle the NUW case).
[0]: for "normal" loops, in the cases where we'd be able to prove
no-wrap via isKnownPredicate, we'd also be able to compute a max
tripcount.
llvm-svn: 269211
Equivalent GEP indices with different types are treated as different
indices altogether, leading to an incorrect AA result. Fix the issue
by comparing indices based on their values.
Thanks to Mikael Holmén for reporting the issue!
Differential Revision: http://reviews.llvm.org/D19935
llvm-svn: 269197
Extract a part of isDereferenceableAndAlignedPointer functionality to Value:
Reviewed By: hfinkel, sanjoy
Differential Revision: http://reviews.llvm.org/D17611
llvm-svn: 269190
Do simplifications common to all shift instructions based on the amount shifted:
1. If the shift amount is known larger than the bitwidth, the result is undefined.
2. If the valid bits of the shift amount are all known to be 0, it's a shift by zero, so the shift operand is the result.
Note that we could generalize the shift-by-zero transform into a shift-by-constant if all of the valid bits in the shift
amount are known, but that would have to be done in InstCombine rather than here because it would mean we need to create
a new shift instruction.
Differential Revision: http://reviews.llvm.org/D19874
llvm-svn: 269114
The plan is to eventually make this logic simpler, however I expect it to
be a little tricky for the foreseeable future (at least until we're rid of
pointee types), so move it here so that it can be reused to build a summary
index for devirtualization.
Differential Revision: http://reviews.llvm.org/D20005
llvm-svn: 269081
This removes a redundant stride versioning step (we already
do it in getPtrStride, so it has no effect) and uses PSE to
get the SCEV expressions for the source and destination
(this might have changed when getPtrStride was called).
I discovered this through code inspection, and couldn't
produce a regression test for it.
llvm-svn: 269052
Summary:
The idea is very close to what we do for assume intrinsics: we mark the
guard intrinsics as writing to arbitrary memory to maintain control
dependence, but under the covers we teach AA that they do not mod any
particular memory location.
Reviewers: chandlerc, hfinkel, gbiv, reames
Subscribers: george.burgess.iv, mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D19575
llvm-svn: 269007
We can use calls to @llvm.experimental.guard to prove predicates,
relying on the fact that in all locations domianted by a call to
@llvm.experimental.guard the predicate it is guarding is known to be
true.
llvm-svn: 268997
When we encounter unsafe memory dependencies, loop distribution could
help.
Even though, the diagnostics is in LAA, it's only currently emitted in
the vectorizer.
llvm-svn: 268987
When deciding if a vector calculation can be done in a smaller bitwidth, use sign bit information from ValueTracking to add more information and allow more truncations.
llvm-svn: 268921
A number of libcalls don't exist in any particular lib but are, instead,
defined in math.h as inline functions (even in C mode!). Don't rely on
their existence when lowering @llvm.{cos,sin,floor,..}.f32, promote them
instead.
N.B. We had logic to handle FREM but were missing out on a number of
others. This change generalizes the FREM handling.
llvm-svn: 268875
This test was crashing, and currently it breaks bootstrapping clang with debuginfo
Differential Revision: http://reviews.llvm.org/D20008
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 268715
This message used to be correct, when all we cared about was whether the
dependence was safe (i.e. NoDep) or unsafe. With the current more
precise characterization, this is a forward dep.
llvm-svn: 268695
We assumed that ConstantVectors would be rather uninteresting from the
perspective of analysis. However, this is not the case due to a quirk
of how LLVM handles vectors of i1. Vectors of i1 are not
ConstantDataVectors like vectors of i8, i16, i32 or i64 because i1's
SizeInBits differs from it's StoreSizeInBytes. This leads to it being
categorized as a ConstantVector instead of a ConstantDataVector.
Instead, treat ConstantVector more uniformly.
This fixes PR27591.
llvm-svn: 268479
A loop pass that didn't preserve this entire set of passes wouldn't
play well with other loop passes, since these are generally a basic
requirement to do any interesting transformations to a loop.
Adds a helper to get the set of analyses a loop pass should preserve,
and checks that any loop pass we run satisfies the requirement.
llvm-svn: 268444
In the "LoopDispositions:" section:
- Instead of printing out a list, print out a "dictionary" to make it
obvious by inspection which disposition is for which loop. This is
just a cosmetic change.
- Print dispositions for parent _and_ sibling loops. I will use this
to write a test case.
llvm-svn: 268405
Summary
When a non-escaping pointer is compared to a global value, the
comparison can be folded even if the corresponding malloc/allocation
call cannot be elided.
We need to make sure the global value is not null, since comparisons to
null cannot be folded.
In future, we should also handle cases when the the comparison
instruction dominates the pointer escape.
Reviewers: sanjoy
Subscribers s.egerton, llvm-commits
Differential Revision: http://reviews.llvm.org/D19549
llvm-svn: 268390
We were overly cautious in our analysis of loops which have invokes
which unwind to EH pads. The loop unroll transform is safe because it
only clones blocks in the loop body, it does not try to split critical
edges involving EH pads. Instead, move the necessary safety check to
LoopUnswitch.
N.B. The safety check for loop unswitch is covered by an existing test
which fails without it.
llvm-svn: 268357
that it computes. Currently this is used for testing and precision
tuning, but it might be used by optimizations later.
Differential Revision: http://reviews.llvm.org/D19179
llvm-svn: 268291
As shown in the diff, we used to add to CFLAA's cache by doing
`Cache[Fn] = buildSetsFrom(Fn)`. `buildSetsFrom(Fn)` may cause `Cache`
to reallocate its underlying storage, if this happens and `Cache[Fn]`
was evaluated prior to `buildSetsFrom(Fn)`, then we'll store the result
to a bad address.
Patch by Jia Chen.
llvm-svn: 268269
There are currently some bugs in tree around SCEV caching an incorrect
loop disposition. Printing out loop dispositions will let us write
whitebox tests as those are fixed.
The dispositions are printed as a list in "inside out" order,
i.e. innermost loop first.
llvm-svn: 268177
matchSelectPattern attempts to see through casts which mask min/max
patterns from being more obvious. Under certain circumstances, it would
misidentify a sequence of instructions as a min/max because it assumed
that folding casts would preserve the result. This is not the case for
floating point <-> integer casts.
This fixes PR27575.
llvm-svn: 268086
Summary:
Historically, we had a switch in the Makefiles for turning on "expensive
checks". This has never been ported to the cmake build, but the
(dead-ish) code is still around.
This will also make it easier to turn it on in buildbots.
Reviewers: chandlerc
Subscribers: jyknight, mzolotukhin, RKSimon, gberry, llvm-commits
Differential Revision: http://reviews.llvm.org/D19723
llvm-svn: 268050
I tried to be as close as possible to the strongest check that
existed before; cleaning these up properly is left for future work.
Differential Revision: http://reviews.llvm.org/D19469
llvm-svn: 267758
This change adds a new hook for estimating the cost of vector extracts followed
by zero- and sign-extensions. The motivating example for this change is the
SMOV and UMOV instructions on AArch64. These instructions move data from vector
to general purpose registers while performing the corresponding extension
(sign-extend for SMOV and zero-extend for UMOV) at the same time. For these
operations, TargetTransformInfo can assume the extensions are free and only
report the cost of the vector extract. The SLP vectorizer has been updated to
make use of the new hook.
Differential Revision: http://reviews.llvm.org/D18523
llvm-svn: 267725
Summary:
Refine the workaround from r266877 that attempts to prevent
renaming of locals in inline assembly, so that in addition to looking
for a llvm.used local value, that there is at least one inline assembly
call in the module. Otherwise, debug functions added to the llvm.used
can block importing/exporting unnecessarily.
Reviewers: joker.eph
Subscribers: llvm-commits, joker.eph
Differential Revision: http://reviews.llvm.org/D19573
llvm-svn: 267717
Extract a part of isDereferenceableAndAlignedPointer functionality to Value::getPointerDerferecnceableBytes. Currently it's a NFC, but in future I'm going to accumulate all the logic about value dereferenceability in this function similarly to Value::getPointerAlignment function (D16144).
Reviewed By: reames
Differential Revision: http://reviews.llvm.org/D17572
llvm-svn: 267708
This is required to use this function from isSafeToSpeculativelyExecute
Reviewed By: hfinkel
Differential Revision: http://reviews.llvm.org/D16231
llvm-svn: 267692
When encountering a non-local pointer, LVI would eagerly scan the block for dereferences of the given object to prove the pointer to be non null. That's all well and good, but *then* we'd go recurse through our input blocks. As a result, we could end up scanning each and every block we traverse, even if the final definition was obviously non null or we found a constant value somewhere up the chain. The previous code papered over this by using the isKnownNonNull routine from value tracking. This made the duplication less painful in the common case.
Instead, we know do the block scan only *after* we've gotten the recursive results back. This lets us stop scanning individual blocks as soon as we've determined it to be non-null in any predecessor block and use our usual merge rules to propagate that information cheaply through successor blocks. For a pointer which can be found non-null, this does strictly less work and sometimes substaintially so.
Note that the case where we *can't* prove something non-null is still the really expensive case. We end up scanning each and every block looking for a dereference and never end up finding one.
llvm-svn: 267642
Previously we were recursing on our operands for unary and binary operators regardless of whether we knew how to reason about the operator in question. This has the effect of doing a potentially large amount of work, only to throw it away. By checking whether the operation is one LVI can handle, we can cut short the search and return the (overdefined) answer more quickly. The quality of the results produced should not change.
llvm-svn: 267626
As pointed out by John Regehr over in http://reviews.llvm.org/D19485, LVI was being incredibly stupid about applying its transfer rules. Rather than gathering local facts from the expression itself, it was simply giving up entirely if one of the inputs was overdefined. This greatly impacts the precision of the overall analysis and makes it far more fragile as well.
This patch builds on 267609 which did the same thing for unary casts.
llvm-svn: 267620
Essentially, I was using the wrong size function. For types which were sized, but not primitive, I wasn't getting a useful size for the operand and failed an assert. I fixed this, and also added a guard that the input is a sized type. Test case is for the original mistake. I'm not sure how to actually exercise the sized type check.
llvm-svn: 267618
As pointed out by John Regehr over in http://reviews.llvm.org/D19485, LVI was being incredibly stupid about applying its transfer rules. Rather than gathering local facts from the expression itself, it was simply giving up entirely if one of the inputs was overdefined. This greatly impacts the precision of the overall analysis and makes it far more fragile as well.
This patch implements only the unary operation case. Once this is in, I'll implement the same for the binary operations.
Differential Revision: http://reviews.llvm.org/D19492
llvm-svn: 267609
There has been much recent confusion about the partition in the lattice between constant and non-constant values. Hopefully, documenting this will prevent confusion going forward.
llvm-svn: 267440
This function handled both unary and binary operators. Cloning and specializing leads to much easier to follow code with minimal duplicatation.
llvm-svn: 267438
Summary:
This implements a new method of run-time checking the NoWrap
SCEV predicates, which should be easier to optimize and nicer
for targets that don't correctly handle multiplication/addition
of large integer types (like i128).
If the AddRec is {a,+,b} and the backedge taken count is c,
the idea is to check that |b| * c doesn't have unsigned overflow,
and depending on the sign of b, that:
a + |b| * c >= a (b >= 0) or
a - |b| * c <= a (b <= 0)
where the comparisons above are signed or unsigned, depending on
the flag that we're checking.
The advantage of doing this is that we avoid extending to a larger
type and we avoid the multiplication of large types (multiplying
i128 can be expensive).
Reviewers: sanjoy
Subscribers: llvm-commits, mzolotukhin
Differential Revision: http://reviews.llvm.org/D19266
llvm-svn: 267389
Summary:
Remove the GlobalValueInfo and change the ModuleSummaryIndex to directly
reference summary objects. The info structure was there to support lazy
parsing of the combined index summary objects, which is no longer
needed and not supported.
Reviewers: joker.eph
Subscribers: joker.eph, llvm-commits
Differential Revision: http://reviews.llvm.org/D19462
llvm-svn: 267344
Right now it only contains the LinkageType, but will be extended
with "hasSection", "isOptSize", "hasInlineAssembly", etc.
Differential Revision: http://reviews.llvm.org/D19404
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 267319
The original commit was reverted because of a buildbot problem with LazyCallGraph::SCC handling (not related to the OptBisect handling).
Differential Revision: http://reviews.llvm.org/D19172
llvm-svn: 267231
This intrinsic takes two arguments, ``%ptr`` and ``%offset``. It loads
a 32-bit value from the address ``%ptr + %offset``, adds ``%ptr`` to that
value and returns it. The constant folder specifically recognizes the form of
this intrinsic and the constant initializers it may load from; if a loaded
constant initializer is known to have the form ``i32 trunc(x - %ptr)``,
the intrinsic call is folded to ``x``.
LLVM provides that the calculation of such a constant initializer will
not overflow at link time under the medium code model if ``x`` is an
``unnamed_addr`` function. However, it does not provide this guarantee for
a constant initializer folded into a function body. This intrinsic can be
used to avoid the possibility of overflows when loading from such a constant.
Differential Revision: http://reviews.llvm.org/D18367
llvm-svn: 267223
The relative vtable ABI (PR26723) needs PLT relocations to refer to virtual
functions defined in other DSOs. The unnamed_addr attribute means that the
function's address is not significant, so we're allowed to substitute it
with the address of a PLT entry.
Also includes a bonus feature: addends for COFF image-relative references.
Differential Revision: http://reviews.llvm.org/D17938
llvm-svn: 267211
Summary:
(... while still not using a PostDomTree)
The way we use isKnownNotFullPoison from SCEV today, the new CFG walking
logic will not trigger for any realistic cases -- it will kick in only
for situations where we could have merged the contiguous basic blocks
anyway[0], since the poison generating instruction dominates all of its
non-PHI uses (which are the only uses we consider right now).
However, having this change in place will allow a later bugfix to break
fewer llvm-lit tests.
[0]: i.e. cases where block A branches to block B and B is A's only
successor and A is B's only predecessor.
Reviewers: broune, bjarke.roune
Subscribers: mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D19212
llvm-svn: 267175
Summary:
Also adds a small comment blurb on control flow + no-wrap flags, since
that question came up a few days back on llvm-dev.
Reviewers: bjarke.roune, broune
Subscribers: sanjoy, mcrosier, llvm-commits, mzolotukhin
Differential Revision: http://reviews.llvm.org/D19209
llvm-svn: 267110
This patch implements a optimization bisect feature, which will allow optimizations to be selectively disabled at compile time in order to track down test failures that are caused by incorrect optimizations.
The bisection is enabled using a new command line option (-opt-bisect-limit). Individual passes that may be skipped call the OptBisect object (via an LLVMContext) to see if they should be skipped based on the bisect limit. A finer level of control (disabling individual transformations) can be managed through an addition OptBisect method, but this is not yet used.
The skip checking in this implementation is based on (and replaces) the skipOptnoneFunction check. Where that check was being called, a new call has been inserted in its place which checks the bisect limit and the optnone attribute. A new function call has been added for module and SCC passes that behaves in a similar way.
Differential Revision: http://reviews.llvm.org/D19172
llvm-svn: 267022
This change adds a couple of test cases to make sure FindAvailableLoadedValue does the right thing. At the moment, the code added is dead, but separating it makes follow on changes far more obvious.
llvm-svn: 266999
No matter what value you OR in to A, the result of (or A, B) is going to be UGE A. When A and B are positive, it's SGE too. If A is negative, OR'ing a value into it can't make it positive, but can increase its value closer to -1, therefore (or A, B) is SGE A. Working through all possible combinations produces this truth table:
```
A is
+, -, +/-
F F F + B is
T F ? -
? F ? +/-
```
The related optimizations are flipping the 'slt' for 'sge' which always NOTs the result (if the result is known), and swapping the LHS and RHS while swapping the comparison predicate.
There are more idioms left to implement (aren't there always!) but I've stopped here because any more would risk becoming unreasonable for reviewers.
llvm-svn: 266939
Summary:
This patch prevents importing from (and therefore exporting from) any
module with a "llvm.used" local value. Local values need to be promoted
and renamed when importing, and their presense on the llvm.used variable
indicates that there are opaque uses that won't see the rename. One such
example is a use in inline assembly.
See also the discussion at:
http://lists.llvm.org/pipermail/llvm-dev/2016-April/098047.html
As part of this, move collectUsedGlobalVariables out of Transforms/Utils
and into IR/Module so that it can be used more widely. There are several
other places in LLVM that used copies of this code that can be cleaned
up as a follow on NFC patch.
Reviewers: joker.eph
Subscribers: pcc, llvm-commits, joker.eph
Differential Revision: http://reviews.llvm.org/D18986
llvm-svn: 266877
The functionality contained within getIntrinsicIDForCall is two-fold: it
checks if a CallInst's callee is a vectorizable intrinsic. If it isn't
an intrinsic, it attempts to map the call's target to a suitable
intrinsic.
Move the mapping functionality into getIntrinsicForCallSite and rename
getIntrinsicIDForCall to getVectorIntrinsicIDForCall while
reimplementing it in terms of getIntrinsicForCallSite.
llvm-svn: 266801
This patch improves SimplifyCFG to catch cases like:
if (a < b) {
if (a > b) <- known to be false
unreachable;
}
Phabricator Revision: http://reviews.llvm.org/D18905
llvm-svn: 266767
Rather than checking for the SCEV type prior to calling
getContantPart, perform the checks in the function. This reduces
the number of places where the checks are needed.
Differential Revision: http://reviews.llvm.org/D19241
llvm-svn: 266759
Summary:
Need to use predecessors for reverse graph, successors for forward graph.
succ_iterator/pred_iterator are not compatible, this patch is all the work necessary to work around that (which is what everywhere else does). Not sure if there is a better way, so cc'ing some random folks to take a gander :)
Reviewers: dblaikie, qcolombet, echristo
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D18796
llvm-svn: 266718
Summary:
Calls to @llvm.experimental.deoptimize are expected to "never execute",
so optimize them as such.
Reviewers: chandlerc
Subscribers: junbuml, mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D19095
llvm-svn: 266654
This reverts commit r266477.
This commit introduces cyclic dependency. This commit has "Analysis" depend on "ProfileData",
while "ProfileData" depends on "Object", which depends on "BitCode", which
depends on "Analysis".
llvm-svn: 266619
Removed some unused headers, replaced some headers with forward class declarations.
Found using simple scripts like this one:
clear && ack --cpp -l '#include "llvm/ADT/IndexedMap.h"' | xargs grep -L 'IndexedMap[<]' | xargs grep -n --color=auto 'IndexedMap'
Patch by Eugene Kosov <claprix@yandex.ru>
Differential Revision: http://reviews.llvm.org/D19219
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 266595
Adds an interface to get ProfileSummary for a module and makes InlineCost use ProfileSummary to get max function count.
Differential Revision: http://reviews.llvm.org/D18622
llvm-svn: 266477
Summary:
InlineCost's threshold is multiplied by this value. This lets us adjust
the inlining threshold up or down on a per-target basis. For example,
we might want to increase the threshold on targets where calls are
unusually expensive.
Reviewers: chandlerc
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D18560
llvm-svn: 266405
If the size of an AST entry changes, we also need to make sure we perform
necessary alias set merges, as the new size may overlap pointers in other sets.
We happen to run into this with memset, because memset allows an entry for a
i8* pointer to have a decidedly non-i8 size.
This fixes PR27262.
Differential Revision: http://reviews.llvm.org/D18939
llvm-svn: 266381
Some SIMD implementations are not IEEE-754 compliant, for example ARM's NEON.
This patch teaches the loop vectorizer to only allow transformations of loops
that either contain no floating-point operations or have enough allowance
flags supporting lack of precision (ex. -ffast-math, Darwin).
For that, the target description now has a method which tells us if the
vectorizer is allowed to handle FP math without falling into unsafe
representations, plus a check on every FP instruction in the candidate loop
to check for the safety flags.
This commit makes LLVM behave like GCC with respect to ARM NEON support, but
it stops short of fixing the underlying problem: sub-normals. Neither GCC
nor LLVM have a flag for allowing sub-normal operations. Before this patch,
GCC only allows it using unsafe-math flags and LLVM allows it by default with
no way to turn it off (short of not using NEON at all).
As a first step, we push this change to make it safe and in sync with GCC.
The second step is to discuss a new sub-normal's flag on both communitues
and come up with a common solution. The third step is to improve the FastMath
flags in LLVM to encode sub-normals and use those flags to restrict NEON FP.
Fixes PR16275.
llvm-svn: 266363
Summary:
If a PHI has an incoming undef, we can pretend that it is equal to one
non-undef, non-self incoming value.
This is particularly relevant in combination with the StructurizeCFG
pass, which introduces PHI nodes with undefs. Previously, this lead to
branch conditions that were uniform before StructurizeCFG to become
non-uniform afterwards, which confused the SIAnnotateControlFlow
pass.
This fixes a crash when Mesa radeonsi compiles a shader from
dEQP-GLES3.functional.shaders.switch.switch_in_for_loop_dynamic_vertex
Reviewers: arsenm, tstellarAMD, jingyue
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D19013
llvm-svn: 266347
Summary:
Add a print method to Predicated Scalar Evolution which prints all interesting
transformations done by PSE.
Loop Access Analysis will now print this as part of the analysis output.
We now use this to check the exact expression transformations that were done
by PSE in LAA.
The additional checking also acts as white-box testing for the getAsAddRec method.
Reviewers: anemet, sanjoy
Subscribers: sanjoy, mzolotukhin, llvm-commits
Differential Revision: http://reviews.llvm.org/D18792
llvm-svn: 266334
The behavior of {MIN,MAX}NAN differs from that of {MIN,MAX}NUM when only
one of the inputs is NaN: -NUM will return the non-NaN argument while
-NAN would return NaN.
It is desirable to lower to @llvm.{min,max}num to -NAN if they don't
have a native instruction for -NUM. Notably, ARMv7 NEON's vmin has the
-NAN semantics.
N.B. Of course, it is only safe to do this if the intrinsic call is
marked nnan.
llvm-svn: 266279
This patch fixes calculating of builtin_object_size if it depends on a
condition. Before this patch compiler did not know how to calculate the
object size when it finds a condition that cannot be eliminated.
This patch enables calculating of builtin_object_size even in case when
condition cannot be eliminated by choosing minimum or maximum value as a
result from condition. Choosing minimum or maximum value from condition
is based on the second argument of __builtin_object_size function.
Patch by Strahinja Petrovic.
Differential Revision: http://reviews.llvm.org/D18438
llvm-svn: 266193
Remove an ad-hoc transform in InstCombine and replace it with more
general machinery (ValueTracking, InstructionSimplify and VectorUtils).
This fixes PR27332.
llvm-svn: 266175
`allocsize` is a function attribute that allows users to request that
LLVM treat arbitrary functions as allocation functions.
This patch makes LLVM accept the `allocsize` attribute, and makes
`@llvm.objectsize` recognize said attribute.
The review for this was split into two patches for ease of reviewing:
D18974 and D14933. As promised on the revisions, I'm landing both
patches as a single commit.
Differential Revision: http://reviews.llvm.org/D14933
llvm-svn: 266032
Summary:
This is the first step in also serializing the index out to LLVM
assembly.
The per-module summary written to bitcode is moved out of the bitcode
writer and to a new analysis pass (ModuleSummaryIndexWrapperPass).
The pass itself uses a new builder class to compute index, and the
builder class is used directly in places where we don't have a pass
manager (e.g. llvm-as).
Because we are computing summaries outside of the bitcode writer, we no
longer can use value ids created by the bitcode writer's
ValueEnumerator. This required changing the reference graph edge type
to use a new ValueInfo class holding a union between a GUID (combined
index) and Value* (permodule index). The Value* are converted to the
appropriate value ID during bitcode writing.
Also, this enables removal of the BitWriter library's dependence on the
Analysis library that was previously required for the summary computation.
Reviewers: joker.eph
Subscribers: joker.eph, llvm-commits
Differential Revision: http://reviews.llvm.org/D18763
llvm-svn: 265941
Summary:
This change teaches SCEV to see reduce `(extractvalue
0 (op.with.overflow X Y))` into `op X Y` (with a no-wrap tag if
possible).
Reviewers: atrick, regehr
Subscribers: mcrosier, mzolotukhin, llvm-commits
Differential Revision: http://reviews.llvm.org/D18684
llvm-svn: 265912
Summary:
The llvm cos intrinsic currently does not propagate undef's. This change
transforms cos(undef) to null value or 0.
There are 2 test cases added as well.
Patch by Anna Thomas!
Reviewers: sanjoy
Subscribers: majnemer, llvm-commits
Differential Revision: http://reviews.llvm.org/D18863
llvm-svn: 265825
This re-commits r265535 which was reverted in r265541 because it
broke the windows bots. The problem was that we had a PointerIntPair
which took a pointer to a struct allocated with new. The problem
was that new doesn't provide sufficient alignment guarantees.
This pattern was already present before r265535 and it just happened
to work. To fix this, we now separate the PointerToIntPair from the
ExitNotTakenInfo struct into a pointer and a bool.
Original commit message:
Summary:
When the backedge taken codition is computed from an icmp, SCEV can
deduce the backedge taken count only if one of the sides of the icmp
is an AddRecExpr. However, due to sign/zero extensions, we sometimes
end up with something that is not an AddRecExpr.
However, we can use SCEV predicates to produce a 'guarded' expression.
This change adds a method to SCEV to get this expression, and the
SCEV predicate associated with it.
In HowManyGreaterThans and HowManyLessThans we will now add a SCEV
predicate associated with the guarded backedge taken count when the
analyzed SCEV expression is not an AddRecExpr. Note that we only do
this as an alternative to returning a 'CouldNotCompute'.
We use new feature in Loop Access Analysis and LoopVectorize to analyze
and transform more loops.
Reviewers: anemet, mzolotukhin, hfinkel, sanjoy
Subscribers: flyingforyou, mcrosier, atrick, mssimpso, sanjoy, mzolotukhin, llvm-commits
Differential Revision: http://reviews.llvm.org/D17201
llvm-svn: 265786
Summary:
Fixes PR26774.
If you're aware of the issue, feel free to skip the "Motivation"
section and jump directly to "This patch".
Motivation:
I define "refinement" as discarding behaviors from a program that the
optimizer has license to discard. So transforming:
```
void f(unsigned x) {
unsigned t = 5 / x;
(void)t;
}
```
to
```
void f(unsigned x) { }
```
is refinement, since the behavior went from "if x == 0 then undefined
else nothing" to "nothing" (the optimizer has license to discard
undefined behavior).
Refinement is a fundamental aspect of many mid-level optimizations done
by LLVM. For instance, transforming `x == (x + 1)` to `false` also
involves refinement since the expression's value went from "if x is
`undef` then { `true` or `false` } else { `false` }" to "`false`" (by
definition, the optimizer has license to fold `undef` to any non-`undef`
value).
Unfortunately, refinement implies that the optimizer cannot assume
that the implementation of a function it can see has all of the
behavior an unoptimized or a differently optimized version of the same
function can have. This is a problem for functions with comdat
linkage, where a function can be replaced by an unoptimized or a
differently optimized version of the same source level function.
For instance, FunctionAttrs cannot assume a comdat function is
actually `readnone` even if it does not have any loads or stores in
it; since there may have been loads and stores in the "original
function" that were refined out in the currently visible variant, and
at the link step the linker may in fact choose an implementation with
a load or a store. As an example, consider a function that does two
atomic loads from the same memory location, and writes to memory only
if the two values are not equal. The optimizer is allowed to refine
this function by first CSE'ing the two loads, and the folding the
comparision to always report that the two values are equal. Such a
refined variant will look like it is `readonly`. However, the
unoptimized version of the function can still write to memory (since
the two loads //can// result in different values), and selecting the
unoptimized version at link time will retroactively invalidate
transforms we may have done under the assumption that the function
does not write to memory.
Note: this is not just a problem with atomics or with linking
differently optimized object files. See PR26774 for more realistic
examples that involved neither.
This patch:
This change introduces a new set of linkage types, predicated as
`GlobalValue::mayBeDerefined` that returns true if the linkage type
allows a function to be replaced by a differently optimized variant at
link time. It then changes a set of IPO passes to bail out if they see
such a function.
Reviewers: chandlerc, hfinkel, dexonsmith, joker.eph, rnk
Subscribers: mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D18634
llvm-svn: 265762
Summary:
In the context of http://wg21.link/lwg2445 C++ uses the concept of
'stronger' ordering but doesn't define it properly. This should be fixed
in C++17 barring a small question that's still open.
The code currently plays fast and loose with the AtomicOrdering
enum. Using an enum class is one step towards tightening things. I later
also want to tighten related enums, such as clang's
AtomicOrderingKind (which should be shared with LLVM as a 'C++ ABI'
enum).
This change touches a few lines of code which can be improved later, I'd
like to keep it as NFC for now as it's already quite complex. I have
related changes for clang.
As a follow-up I'll add:
bool operator<(AtomicOrdering, AtomicOrdering) = delete;
bool operator>(AtomicOrdering, AtomicOrdering) = delete;
bool operator<=(AtomicOrdering, AtomicOrdering) = delete;
bool operator>=(AtomicOrdering, AtomicOrdering) = delete;
This is separate so that clang and LLVM changes don't need to be in sync.
Reviewers: jyknight, reames
Subscribers: jyknight, llvm-commits
Differential Revision: http://reviews.llvm.org/D18775
llvm-svn: 265602
Summary:
When the backedge taken codition is computed from an icmp, SCEV can
deduce the backedge taken count only if one of the sides of the icmp
is an AddRecExpr. However, due to sign/zero extensions, we sometimes
end up with something that is not an AddRecExpr.
However, we can use SCEV predicates to produce a 'guarded' expression.
This change adds a method to SCEV to get this expression, and the
SCEV predicate associated with it.
In HowManyGreaterThans and HowManyLessThans we will now add a SCEV
predicate associated with the guarded backedge taken count when the
analyzed SCEV expression is not an AddRecExpr. Note that we only do
this as an alternative to returning a 'CouldNotCompute'.
We use new feature in Loop Access Analysis and LoopVectorize to analyze
and transform more loops.
Reviewers: anemet, mzolotukhin, hfinkel, sanjoy
Subscribers: flyingforyou, mcrosier, atrick, mssimpso, sanjoy, mzolotukhin, llvm-commits
Differential Revision: http://reviews.llvm.org/D17201
llvm-svn: 265535
To quote the langref "Unlike sqrt in libm, however, llvm.sqrt has
undefined behavior for negative numbers other than -0.0 (which allows
for better optimization, because there is no need to worry about errno
being set). llvm.sqrt(-0.0) is defined to return -0.0 like IEEE sqrt."
This means that it's unsafe to replace sqrt with llvm.sqrt unless the
call is annotated with nnan.
Thanks to Hal Finkel for pointing this out!
llvm-svn: 265521
Prior to this patch, CFLAA wouldn't tag arguments/globals properly if
it didn't find any "interesting" edges on them. This means that, if all
you do is store constants to a global or argument, we would never
actually treat it as a global/argument.
Test case:
define void @foo(i32* %A, i32* %B) #0 {
entry:
store i32 0, i32* %A, align 4
store i32 0, i32* %B, align 4
ret void
}
CFLAA would say that %A can't alias %B, because neither pointer was
used in an interesting way. This patch makes us note whether something
is an argument, global, ... regardless of how interesting CFLAA thinks
its uses are.
(For the record, using a value in an interesting way means loading
from it, using it in a GEP, ...)
llvm-svn: 265474
Add a common parent class for ConstantArray, ConstantVector, and
ConstantStruct called ConstantAggregate. These are the aggregate
subclasses of Constant that take operands.
This is mainly a cleanup, adding common `isa` target and removing
duplicated code. However, it also simplifies caching which constants
point transitively at `GlobalValue` (a possible future direction).
llvm-svn: 265466
A seg-fault occurs due to a reference of a null pointer, which is
the value returned by getConstantPart. This function returns
null if the constant part is not found. The code that calls this
function needs to check for the null return value.
Differential Revision: http://reviews.llvm.org/D18718
llvm-svn: 265319
Floating point intrinsics in LLVM are generally not speculatively
executed, since most of them are defined to behave the same as libm
functions, which set errno.
However, the only error that can happen when executing ceil, floor,
nearbyint, rint and round libm functions per POSIX.1-2001 is -ERANGE,
and that requires the maximum value of the exponent to be smaller
than the number of mantissa bits, which is not the case with any of
the floating point types supported by LLVM.
The trunc and copysign functions never set errno per per POSIX.1-2001.
Differential Revision: http://reviews.llvm.org/D18643
llvm-svn: 265262
This patch simply mirrors the attributes we give to @llvm.nvvm.reflect
to the __nvvm_reflect libdevice call. This shaves about 30% of the code
in libdevice away because of CSE opportunities. It's also helps us
figure out that libdevice implementations of transcendental functions
don't have side-effects.
llvm-svn: 265060
This way once we teach MatchBinaryOp to map more things into arithmetic,
the non-wrapping add recurrence construction would understand it too.
Right now MatchBinaryOp still only understands arithmetic, so this is
solely a code-reorganization change.
llvm-svn: 264994
We already try not to truncate PHIs in computeMinimalBitwidths. LoopVectorize can't handle it and we really don't need to, because both induction and reduction PHIs are truncated by other means.
However, we weren't bailing out in all the places we should have, and we ended up by returning a PHI to be truncated, which has caused PR27018.
This fixes PR17018.
llvm-svn: 264852
MatchBinaryOp abstracts out the IR instructions from the operations they
represent. While this change is NFC, we will use this factoring later
to map things like `(extractvalue 0 (sadd.with.overflow X Y))` to `(add
X Y)`.
llvm-svn: 264747
A release fence acts as a publication barrier for stores within the current thread to become visible to other threads which might observe the release fence. It does not require the current thread to observe stores performed on other threads. As a result, we can allow store-load and load-load forwarding across a release fence.
We choose to be much more conservative about stores. In theory, nothing prevents us from shifting a store from after a release fence to before it, and then eliminating the preceeding (previously fenced) store. Doing this without actually moving the second store is likely also legal, but we chose to be conservative at this time.
The LangRef indicates only atomic loads and stores are effected by fences. This patch chooses to be far more conservative then that.
This is the GVN companion to http://reviews.llvm.org/D11434 which applied the same logic in EarlyCSE and has been baking in tree for a while now.
Differential Revision: http://reviews.llvm.org/D11436
llvm-svn: 264472
This reserves an MDKind for !llvm.loop, which allows callers to avoid a
string-based lookup. I'm not sure why it was missing.
There should be no functionality change here, just a small compile-time
speedup.
llvm-svn: 264371
We used to only allow SCEVAddRecExpr for pointer expressions in order to
be able to compute the bounds. However this is also trivially possible
for loop-invariant addresses (scUnknown) since then the bounds are the
address itself.
Interestingly, we used allow this for the special case when the
loop-invariant address happens to also be an SCEVAddRecExpr (in an outer
loop).
There are a couple more loops that are vectorized in SPEC after this.
My guess is that the main reason we don't see more because for example a
loop-invariant load is vectorized into a splat vector with several
vector-inserts. This is likely to make the vectorization unprofitable.
I.e. we don't notice that a later LICM will move all of this out of the
loop so the cost estimate should really be 0.
llvm-svn: 264243
Summary:
This changes the conversion functions from SCEV * to SCEVAddRecExpr from
ScalarEvolution and PredicatedScalarEvolution to return a SCEVAddRecExpr*
instead of a SCEV* (which removes the need of most clients to do a
dyn_cast right after calling these functions).
We also don't add new predicates if the transformation was not successful.
This is not entirely a NFC (as it can theoretically remove some predicates
from LAA when we have an unknown dependece), but I couldn't find an obvious
regression test for it.
Reviewers: sanjoy
Subscribers: sanjoy, mzolotukhin, llvm-commits
Differential Revision: http://reviews.llvm.org/D18368
llvm-svn: 264161
Summary:
replaceCongruentIVs can break LCSSA when trying to replace IV increments
since it tries to replace all uses of a phi node with another phi node
while both of the phi nodes are not necessarily in the processed loop.
This will cause an assert in IndVars.
To fix this, we add a check to make sure that the replacement maintains
LCSSA.
Reviewers: sanjoy
Subscribers: mzolotukhin, llvm-commits
Differential Revision: http://reviews.llvm.org/D18266
llvm-svn: 263941
Summary:
It can hurt performance to prefetch ahead too much. Be conservative for
now and don't prefetch ahead more than 3 iterations on Cyclone.
Reviewers: hfinkel
Subscribers: llvm-commits, mzolotukhin
Differential Revision: http://reviews.llvm.org/D17949
llvm-svn: 263772
