This adds custom lowering for truncating stores when operating on
fixed length vectors in SVE. It also includes a DAG combine to
fold extends followed by truncating stores into non-truncating
stores in order to prevent this pattern appearing once truncating
stores are supported.
Currently truncating stores are not used in certain cases where
the size of the vector is larger than the target vector width.
Differential Revision: https://reviews.llvm.org/D104471
Since we're still building on top of the MVT based infrastructure, we
need to track the pointer type/address space on the side so we can end
up with the correct pointer LLTs when interpreting CCValAssigns.
This also fixes some missing implicit uses on call instructions, adds
missing G_ASSERT_SEXT/ZEXT annotations, and some missing outgoing
sext/zexts. This also fixes not respecting tablegen requested type
promotions.
This starts treating f64 passed in i32 GPRs as a type of custom
assignment, which restores some previously XFAILed tests. This is due
to getNumRegistersForCallingConv returns a static value, but in this
case it is context dependent on other arguments.
Most of the ugliness is reproducing a hack CC_MipsO32 uses in
SelectionDAG. CC_MipsO32 depends on a bunch of vectors populated from
the original IR argument types in MipsCCState. The way this ends up
working in GlobalISel is it only ends up inspecting the most recently
added vector element. I'm pretty sure there are cleaner ways to do
this, but this seemed easier than fixing up the current DAG
handling. This is another case where it would be easier of the
CCAssignFns were passed the original type instead of only the
pre-legalized ones.
There's still a lot of junk here that shouldn't be necessary. This
also likely breaks big endian handling, but it wasn't complete/tested
anyway since the IRTranslator gives up on big endian targets.
The number of registers used for passing f64 in some cases is context
dependent, and thus getNumRegistersForCallingConv is sometimes
inaccurate. For f64, it reports 1 but is sometimes split into 2 32-bit
registers.
For GlobalISel, the generic argument assignment code expects
getNumRegistersForCallingConv to return an accurate answer. Switch to
marking these arguments as custom so we can deal with this case as a
custom assignment rather.
This temporarily breaks a few globalisel tests which are fixed by a
future change to use more of the generic infrastructure.
This adds custom lowering for truncating stores when operating on
fixed length vectors in SVE. It also includes a DAG combine to
fold extends followed by truncating stores into non-truncating
stores in order to prevent this pattern appearing once truncating
stores are supported.
Currently truncating stores are not used in certain cases where
the size of the vector is larger than the target vector width.
Differential Revision: https://reviews.llvm.org/D104471
This patch prevents GlobalISel from optimizing out redundant branch
instructions when compiling without optimizations.
The motivating example is code like the following common pattern in
Swift, where users expect to be able to set a breakpoint on the early
exit:
public func f(b: Bool) {
guard b else {
return // I would like to set a breakpoint here.
}
...
}
The patch modifies two places in GlobalISEL: The first one is in
IRTranslator.cpp where the removal of redundant branches is made
conditional on the optimization level. The second one is in
AArch64InstructionSelector.cpp where an -O0 *only* optimization is
being removed.
Disabling these optimizations increases code size at -O0 by
~8%. However, doing so improves debuggability, and debug builds are
the primary reason why developers compile without optimizations. We
thus concluded that this is the right trade-off.
rdar://79515454
Differential Revision: https://reviews.llvm.org/D105238
This enables proper lowering of non-byte sized loads. We still aren't
faithfully preserving memory types everywhere, so the legality checks
still only consider the size.
This will currently accept the old number of bytes syntax, and convert
it to a scalar. This should be removed in the near future (I think I
converted all of the tests already, but likely missed a few).
Not sure what the exact syntax and policy should be. We can continue
printing the number of bytes for non-generic instructions to avoid
test churn and only allow non-scalar types for generic instructions.
This will currently print the LLT in parentheses, but accept parsing
the existing integers and implicitly converting to scalar. The
parentheses are a bit ugly, but the parser logic seems unable to deal
without either parentheses or some keyword to indicate the start of a
type.
This can be seen as a follow up to commit 0ee439b705e82a4fe20e2,
that changed the second argument of __powidf2, __powisf2 and
__powitf2 in compiler-rt from si_int to int. That was to align with
how those runtimes are defined in libgcc.
One thing that seem to have been missing in that patch was to make
sure that the rest of LLVM also handle that the argument now depends
on the size of int (not using the si_int machine mode for 32-bit).
When using __builtin_powi for a target with 16-bit int clang crashed.
And when emitting libcalls to those rtlib functions, typically when
lowering @llvm.powi), the backend would always prepare the exponent
argument as an i32 which caused miscompiles when the rtlib was
compiled with 16-bit int.
The solution used here is to use an overloaded type for the second
argument in @llvm.powi. This way clang can use the "correct" type
when lowering __builtin_powi, and then later when emitting the libcall
it is assumed that the type used in @llvm.powi matches the rtlib
function.
One thing that needed some extra attention was that when vectorizing
calls several passes did not support that several arguments could
be overloaded in the intrinsics. This patch allows overload of a
scalar operand by adding hasVectorInstrinsicOverloadedScalarOpd, with
an entry for powi.
Differential Revision: https://reviews.llvm.org/D99439
Global values imply flags such as readable, writable, executable for the
sections that they will be placed in. Currently MC places all such
entries into the same section, using the first set of flags seen. This
can lead to situations in LTO where a writable global is placed in the
same named section as a readable global from another file, and the
section may not be marked writable.
D72194 ensures that mergeable globals with explicit sections are placed
in separate sections with compatible entry size, by emitting the
`unique` assembly syntax where appropriate. This change extends that
approach to include section flags, so that globals with different
section flags are emitted in separate unique sections.
Differential revision: https://reviews.llvm.org/D100944
Since d6de1e1a71406c75a4ea4d5a2fe84289f07ea3a1, no attributes is quivalent to
setting attribute to false.
This is a preliminary commit for https://reviews.llvm.org/D99080
Unlike normal loads these don't have an extension field, but we know
from TargetLowering whether these are sign-extending or zero-extending,
and so can optimise away unnecessary extensions.
This was noticed on RISC-V, where sign extensions in the calling
convention would result in unnecessary explicit extension instructions,
but this also fixes some Mips inefficiencies. PowerPC sees churn in the
tests as all the zero extensions are only for promoting 32-bit to
64-bit, but these zero extensions are still not optimised away as they
should be, likely due to i32 being a legal type.
This also simplifies the WebAssembly code somewhat, which currently
works around the lack of target-independent combines with some ugly
patterns that break once they're optimised away.
Re-landed with correct handling in ComputeNumSignBits for Tmp == VTBits,
where zero-extending atomics were incorrectly returning 0 rather than
the (slightly confusing) required return value of 1.
Re-landed again after D102819 fixed PowerPC to correctly zero-extend all
of its atomics as it claimed to do, since the combination of that bug
and this optimisation caused buildbot regressions.
Reviewed By: RKSimon, atanasyan
Differential Revision: https://reviews.llvm.org/D101342
Unlike normal loads these don't have an extension field, but we know
from TargetLowering whether these are sign-extending or zero-extending,
and so can optimise away unnecessary extensions.
This was noticed on RISC-V, where sign extensions in the calling
convention would result in unnecessary explicit extension instructions,
but this also fixes some Mips inefficiencies. PowerPC sees churn in the
tests as all the zero extensions are only for promoting 32-bit to
64-bit, but these zero extensions are still not optimised away as they
should be, likely due to i32 being a legal type.
This also simplifies the WebAssembly code somewhat, which currently
works around the lack of target-independent combines with some ugly
patterns that break once they're optimised away.
Re-landed with correct handling in ComputeNumSignBits for Tmp == VTBits,
where zero-extending atomics were incorrectly returning 0 rather than
the (slightly confusing) required return value of 1.
Reviewed By: RKSimon, atanasyan
Differential Revision: https://reviews.llvm.org/D101342
This seems to have broken sanitizers, giving lots of
Assertion `NumBits <= MAX_INT_BITS && "bitwidth too large"' failed.
failures across multiple targets (currently X86 and PowerPC). Reverting
until I have a chance to reproduce and debug.
This reverts commit 6e876f9dedf00b24a96b8781e3b39d5282c43e91.
Unlike normal loads these don't have an extension field, but we know
from TargetLowering whether these are sign-extending or zero-extending,
and so can optimise away unnecessary extensions.
This was noticed on RISC-V, where sign extensions in the calling
convention would result in unnecessary explicit extension instructions,
but this also fixes some Mips inefficiencies. PowerPC sees churn in the
tests as all the zero extensions are only for promoting 32-bit to
64-bit, but these zero extensions are still not optimised away as they
should be, likely due to i32 being a legal type.
This also simplifies the WebAssembly code somewhat, which currently
works around the lack of target-independent combines with some ugly
patterns that break once they're optimised away.
Reviewed By: RKSimon, atanasyan
Differential Revision: https://reviews.llvm.org/D101342
LLVM test CodeGen/Mips/sr1.ll tries to check for the absence of a
sequence of instructions with several CHECK-NOT with one of those
directives using a variable defined in another. However CHECK-NOT are
checked independently so that is using a variable defined in a pattern
that should not occur in the input.
This commit removes the definition and uses of variable to check each
line independently, making the check stronger than the current one.
Reviewed By: dsanders
Differential Revision: https://reviews.llvm.org/D99776
This allows these optimisations to apply to e.g. `urem i16` directly
before `urem` is promoted to i32 on architectures where i16 operations
are not intrinsically legal (such as on Aarch64). The legalization then
later can happen more directly and generated code gets a chance to avoid
wasting time on computing results in types wider than necessary, in the end.
Seems like mostly an improvement in terms of results at least as far as x86_64 and aarch64 are concerned, with a few regressions here and there. It also helps in preventing regressions in changes like {D87976}.
Reviewed By: lebedev.ri
Differential Revision: https://reviews.llvm.org/D88785
This also briefly tests a larger set of architectures than the more
exhaustive functionality tests for AArch64 and x86.
As requested in D88785
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D98339
Use a more general strategy when splitting a vector into scalar parts (and vice-versa) to correctly handle vector types whose element size is not a power of 2 (and a multiple of 8).
Reviewed By: atanasyan
Differential Revision: https://reviews.llvm.org/D98273
The code deciding how to split the vector in register-sized integers used the integer division operator, thus rounding down the result.
Correct the computation for irregularly-sized types (non-power-of-two, non multiple of 8) by rounding the division result upwards.
Reviewed By: atanasyan
Differential Revision: https://reviews.llvm.org/D98189
This seems to be more of a Clang thing rather than a generic LLVM thing,
so this moves it out of LLVM pipelines and as Clang extension hooks into
LLVM pipelines.
Move the post-inline EEInstrumentation out of the backend pipeline and
into a late pass, similar to other sanitizer passes. It doesn't fit
into the codegen pipeline.
Also fix up EntryExitInstrumentation not running at -O0 under the new
PM. PR49143
Reviewed By: hans
Differential Revision: https://reviews.llvm.org/D97608
This also removes a pattern from RISCV that is no longer needed
since the sexti32 on the LHS of the srem in the pattern implies
the result is sign extended so the sign_extend_inreg should be
removed in DAG combine now.
Reviewed By: luismarques, RKSimon
Differential Revision: https://reviews.llvm.org/D97133
If sext_inreg is supported, we will turn this into sext_inreg. That
will then remove it if there are enough sign bits. But if sext_inreg
isn't supported, we can still remove the shift pair based on sign
bits.
Split from D95890.
Memory operands store a base alignment that does not factor in
the effect of the offset on the alignment.
Previously the printing code only printed the base alignment if
it was different than the size. If there is an offset, the reader
would need to figure out the effective alignment themselves. This
has confused me before and someone else was recently confused on
IRC.
This patch prints the possibly offset adjusted alignment if it is
different than the size. And prints the base alignment if it is
different than the alignment. The MIR parser has been updated to
read basealign in addition to align.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D94344
Local values are constants or addresses that can't be folded into
the instruction that uses them. FastISel materializes these in a
"local value" area that always dominates the current insertion
point, to try to avoid materializing these values more than once
(per block).
https://reviews.llvm.org/D43093 added code to sink these local
value instructions to their first use, which has two beneficial
effects. One, it is likely to avoid some unnecessary spills and
reloads; two, it allows us to attach the debug location of the
user to the local value instruction. The latter effect can
improve the debugging experience for debuggers with a "set next
statement" feature, such as the Visual Studio debugger and PS4
debugger, because instructions to set up constants for a given
statement will be associated with the appropriate source line.
There are also some constants (primarily addresses) that could be
produced by no-op casts or GEP instructions; the main difference
from "local value" instructions is that these are values from
separate IR instructions, and therefore could have multiple users
across multiple basic blocks. D43093 avoided sinking these, even
though they were emitted to the same "local value" area as the
other instructions. The patch comment for D43093 states:
Local values may also be used by no-op casts, which adds the
register to the RegFixups table. Without reversing the RegFixups
map direction, we don't have enough information to sink these
instructions.
This patch undoes most of D43093, and instead flushes the local
value map after(*) every IR instruction, using that instruction's
debug location. This avoids sometimes incorrect locations used
previously, and emits instructions in a more natural order.
In addition, constants materialized due to PHI instructions are
not assigned a debug location immediately; instead, when the
local value map is flushed, if the first local value instruction
has no debug location, it is given the same location as the
first non-local-value-map instruction. This prevents PHIs
from introducing unattributed instructions, which would either
be implicitly attributed to the location for the preceding IR
instruction, or given line 0 if they are at the beginning of
a machine basic block. Neither of those consequences is good
for debugging.
This does mean materialized values are not re-used across IR
instruction boundaries; however, only about 5% of those values
were reused in an experimental self-build of clang.
(*) Actually, just prior to the next instruction. It seems like
it would be cleaner the other way, but I was having trouble
getting that to work.
This reapplies commits cf1c774d and dc35368c, and adds the
modification to PHI handling, which should avoid problems
with debugging under gdb.
Differential Revision: https://reviews.llvm.org/D91734
This reverts commit cf1c774d6ace59c5adc9ab71b31e762c1be695b1.
This change caused several regressions in the gdb test suite - at least
a sample of which was due to line zero instructions making breakpoints
un-lined. I think they're worth investigating/understanding more (&
possibly addressing) before moving forward with this change.
Revert "[FastISel] NFC: Clean up unnecessary bookkeeping"
This reverts commit 3fd39d3694d32efa44242c099e923a7f4d982095.
Revert "[FastISel] NFC: Remove obsolete -fast-isel-sink-local-values option"
This reverts commit a474657e30edccd9e175d92bddeefcfa544751b2.
Revert "Remove static function unused after cf1c774."
This reverts commit dc35368ccf17a7dca0874ace7490cc3836fb063f.
Revert "[lldb] Fix TestThreadStepOut.py after "Flush local value map on every instruction""
This reverts commit 53a14a47ee89dadb8798ca8ed19848f33f4551d5.
Local values are constants or addresses that can't be folded into
the instruction that uses them. FastISel materializes these in a
"local value" area that always dominates the current insertion
point, to try to avoid materializing these values more than once
(per block).
https://reviews.llvm.org/D43093 added code to sink these local
value instructions to their first use, which has two beneficial
effects. One, it is likely to avoid some unnecessary spills and
reloads; two, it allows us to attach the debug location of the
user to the local value instruction. The latter effect can
improve the debugging experience for debuggers with a "set next
statement" feature, such as the Visual Studio debugger and PS4
debugger, because instructions to set up constants for a given
statement will be associated with the appropriate source line.
There are also some constants (primarily addresses) that could be
produced by no-op casts or GEP instructions; the main difference
from "local value" instructions is that these are values from
separate IR instructions, and therefore could have multiple users
across multiple basic blocks. D43093 avoided sinking these, even
though they were emitted to the same "local value" area as the
other instructions. The patch comment for D43093 states:
Local values may also be used by no-op casts, which adds the
register to the RegFixups table. Without reversing the RegFixups
map direction, we don't have enough information to sink these
instructions.
This patch undoes most of D43093, and instead flushes the local
value map after(*) every IR instruction, using that instruction's
debug location. This avoids sometimes incorrect locations used
previously, and emits instructions in a more natural order.
This does mean materialized values are not re-used across IR
instruction boundaries; however, only about 5% of those values
were reused in an experimental self-build of clang.
(*) Actually, just prior to the next instruction. It seems like
it would be cleaner the other way, but I was having trouble
getting that to work.
Differential Revision: https://reviews.llvm.org/D91734
Based on a discussion on D88783, if we're promoting a funnel shift to a width at least twice the size as the original type, then we can use the 'double shift' patterns (shifting the concatenated sources).
Differential Revision: https://reviews.llvm.org/D89139
Based on offline discussions regarding D89139 and D88783 - we want to make sure targets aren't doing anything particularly dumb
Tests copied from aarch64 which has a mixture of general, legalization and special case tests
