These instructions were renamed in version 2.2 of the user-level ISA spec, but
the old name should also be accepted by standard tools.
llvm-svn: 335154
These are produced by GCC and supported by GAS, but not currently contained in
the pseudoinstruction listing in the RISC-V ISA manual.
llvm-svn: 335127
These are produced by GCC and supported by GAS, but not currently contained in
the pseudoinstruction listing in the RISC-V ISA manual.
llvm-svn: 335120
Fences are inserted according to table A.6 in the current draft of version 2.3
of the RISC-V Instruction Set Manual, which incorporates the memory model
changes and definitions contributed by the RISC-V Memory Consistency Model
task group.
Instruction selection failures will now occur for 8/16/32-bit atomicrmw and
cmpxchg operations when targeting RV32IA until lowering for these operations
is added in a follow-on patch.
Differential Revision: https://reviews.llvm.org/D47589
llvm-svn: 334591
This patch adds lowering for atomic fences and relies on AtomicExpandPass to
lower atomic loads/stores, atomic rmw, and cmpxchg to __atomic_* libcalls.
test/CodeGen/RISCV/atomic-* are modelled on the exhaustive
test/CodeGen/PPC/atomics-regression.ll, and will prove more useful once RV32A
codegen support is introduced.
Fence mappings are taken from table A.6 in the current draft of version 2.3 of
the RISC-V Instruction Set Manual, which incorporates the memory model changes
and definitions contributed by the RISC-V Memory Consistency Model task group.
Differential Revision: https://reviews.llvm.org/D47587
llvm-svn: 334590
The instruction makes use of a previously ignored field in the fence
instruction. It is introduced in the version 2.3 draft of the RISC-V
specification after much work by the Memory Model Task Group.
As clarified here <https://github.com/riscv/riscv-isa-manual/issues/186>,
the fence.tso assembler mnemonic does not have operands.
llvm-svn: 334278
The implementation follows the MIPS backend and expands the pseudo instruction
directly during asm parsing. As the result, only real MC instructions are
emitted to the MCStreamer. The actual expansion to real instructions is
similar to the expansion performed by the GNU Assembler.
This patch supersedes D41949.
Differential Revision: https://reviews.llvm.org/D46118
Patch by Mario Werner.
llvm-svn: 334203
Summary:
They've been deprecated in favor of UADDO/ADDCARRY or USUBO/SUBCARRY for a while.
Target that uses these opcodes are changed in order to ensure their behavior doesn't change.
Reviewers: efriedma, craig.topper, dblaikie, bkramer
Subscribers: jholewinski, arsenm, jyknight, sdardis, nemanjai, nhaehnle, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, jordy.potman.lists, apazos, sabuasal, niosHD, jrtc27, zzheng, edward-jones, mgrang, atanasyan, llvm-commits
Differential Revision: https://reviews.llvm.org/D47422
llvm-svn: 333748
Resolving fixup_riscv_call by assembler when the linker relaxation diabled
and the function and callsite within the same compile unit.
And also adding static_assert after Infos array declaration
to avoid missing any new fixup in MCFixupKindInfo in the future.
Differential Revision: https://reviews.llvm.org/D47126
llvm-svn: 333487
Summary:
Base and offset are always separated when a GlobalAddress node is lowered
(rL332641) as an optimization to reduce instruction count. However, this
optimization is not profitable if the Global Address ends up being used in only
instruction.
This patch adds peephole optimizations that merge an offset of
an address calculation into the LUI %%hi and ADD %lo of the lowering sequence.
The peephole handles three patterns:
1) ADDI (ADDI (LUI %hi(global)) %lo(global)), offset
--->
ADDI (LUI %hi(global + offset)) %lo(global + offset).
This generates:
lui a0, hi (global + offset)
add a0, a0, lo (global + offset)
Instead of
lui a0, hi (global)
addi a0, hi (global)
addi a0, offset
This pattern is for cases when the offset is small enough to fit in the
immediate filed of ADDI (less than 12 bits).
2) ADD ((ADDI (LUI %hi(global)) %lo(global)), (LUI hi_offset))
--->
offset = hi_offset << 12
ADDI (LUI %hi(global + offset)) %lo(global + offset)
Which generates the ASM:
lui a0, hi(global + offset)
addi a0, lo(global + offset)
Instead of:
lui a0, hi(global)
addi a0, lo(global)
lui a1, (offset)
add a0, a0, a1
This pattern is for cases when the offset doesn't fit in an immediate field
of ADDI but the lower 12 bits are all zeros.
3) ADD ((ADDI (LUI %hi(global)) %lo(global)), (ADDI lo_offset, (LUI hi_offset)))
--->
offset = global + offhi20<<12 + offlo12
ADDI (LUI %hi(global + offset)) %lo(global + offset)
Which generates the ASM:
lui a1, %hi(global + offset)
addi a1, %lo(global + offset)
Instead of:
lui a0, hi(global)
addi a0, lo(global)
lui a1, (offhi20)
addi a1, (offlo12)
add a0, a0, a1
This pattern is for cases when the offset doesn't fit in an immediate field
of ADDI and both the lower 1 bits and high 20 bits are non zero.
Reviewers: asb
Reviewed By: asb
Subscribers: rbar, johnrusso, simoncook, jordy.potman.lists, apazos,
niosHD, kito-cheng, shiva0217, zzheng, edward-jones, mgrang
llvm-svn: 333455
To do this:
1. Add fixup_riscv_relax fixup types which eventually will
transfer to R_RISCV_RELAX relocation types.
2. Insert R_RISCV_RELAX relocation types to auipc function call
expression when linker relaxation enabled.
Differential Revision: https://reviews.llvm.org/D44886
llvm-svn: 333158
Summary:
Set CostPerUse higher for registers that are not used in the compressed
instruction set. This will influence the greedy register allocator to reduce
the use of registers that can't be encoded in 16 bit instructions. This
affects register allocation even when compressed instruction isn't targeted,
we see no major negative codegen impact.
Reviewers: asb
Reviewed By: asb
Subscribers: rbar, johnrusso, simoncook, jordy.potman.lists, apazos, niosHD, kito-cheng, shiva0217, zzheng, edward-jones, mgrang
Differential Revision: https://reviews.llvm.org/D47039
llvm-svn: 333132
For RISC-V it is desirable to have relaxation happen in the linker once
addresses are known, and as such the size between two instructions/byte
sequences in a section could change.
For most assembler expressions, this is fine, as the absolute address results
in the expression being converted to a fixup, and finally relocations.
However, for expressions such as .quad .L2-.L1, the assembler folds this down
to a constant once fragments are laid out, under the assumption that the
difference can no longer change, although in the case of linker relaxation the
differences can change at link time, so the constant is incorrect. One place
where this commonly appears is in debug information, where the size of a
function expression is in a form similar to the above.
This patch extends the assembler to allow an AsmBackend to declare that it
does not want the assembler to fold down this expression, and instead generate
a pair of relocations that allow the linker to carry out the calculation. In
this case, the expression is not folded, but when it comes to emitting a
fixup, the generic FK_Data_* fixups are converted into a pair, one for the
addition half, one for the subtraction, and this is passed to the relocation
generating methods as usual. I have named these FK_Data_Add_* and
FK_Data_Sub_* to indicate which half these are for.
For RISC-V, which supports this via e.g. the R_RISCV_ADD64, R_RISCV_SUB64 pair
of relocations, these are also set to always emit relocations relative to
local symbols rather than section offsets. This is to deal with the fact that
if relocations were calculated on e.g. .text+8 and .text+4, the result 12
would be stored rather than 4 as both addends are added in the linker.
Differential Revision: https://reviews.llvm.org/D45181
Patch by Simon Cook.
llvm-svn: 333079
This is a different approach to fixing the problem described in D46746.
RISCVAsmBackend currently depends on the getSize helper function returning the
number of bytes a fixup may change (note: some other backends have a similar
helper named getFixupNumKindBytes). As noted in that review, this doesn't
return the correct size for FK_Data_1, FK_Data_2, or FK_Data_8 meaning that
too few bytes will be written in the case of FK_Data_8, and there's the
potential of writing outside the Data array for the smaller fixups.
D46746 extends getSize to recognise some of the builtin fixup types. Rather
than having a function that needs to be kept up to date as new builtin or
target-specific fixups are added, We can calculate an appropriate bound on the
number of bytes that might be touched using Info.TargetSize and
Info.TargetOffset.
Differential Revision: https://reviews.llvm.org/D46965
llvm-svn: 333076
With this we gain a little flexibility in how the generic object
writer is created.
Part of PR37466.
Differential Revision: https://reviews.llvm.org/D47045
llvm-svn: 332868
To make this work I needed to add an endianness field to MCAsmBackend
so that writeNopData() implementations know which endianness to use.
Part of PR37466.
Differential Revision: https://reviews.llvm.org/D47035
llvm-svn: 332857
Provide some free functions to reduce verbosity of endian-writing
a single value, and replace the endianness template parameter with
a field.
Part of PR37466.
Differential Revision: https://reviews.llvm.org/D47032
llvm-svn: 332757
For RISCV branch instructions, we need to preserve relocation types when linker
relaxation enabled, so then linker could modify offset when the branch offsets
changed.
We preserve relocation types by define shouldForceRelocation.
IsResolved return by evaluateFixup will always false when shouldForceRelocation
return true. It will make RISCV MC Branch Relaxation always relax 16-bit
branches to 32-bit form, even if the symbol actually could be resolved.
To avoid 16-bit branches always relax to 32-bit form when linker relaxation
enabled, we add a new parameter WasForced to indicate that the symbol actually
couldn't be resolved and not forced by shouldForceRelocation return true.
RISCVAsmBackend::fixupNeedsRelaxationAdvanced could relax branches with
unresolved symbols by (!IsResolved && !WasForced).
RISCV MC Branch Relaxation is needed because RISCV could perform 32-bit
to 16-bit transformation in MC layer.
Differential Revision: https://reviews.llvm.org/D46350
llvm-svn: 332696
Summary:
When lowering global address, lower the base as a TargetGlobal first then
create an SDNode for the offset separately and chain it to the address calculation
This optimization will create a DAG where the base address of a global access will
be reused between different access. The offset can later be folded into the immediate
part of the memory access instruction.
With this optimization we generate:
lui a0, %hi(s)
addi a0, a0, %lo(s) ; shared base address.
addi a1, zero, 20 ; 2 instructions per access.
sw a1, 44(a0)
addi a1, zero, 10
sw a1, 8(a0)
addi a1, zero, 30
sw a1, 80(a0)
Instead of:
lui a0, %hi(s+44) ; 3 instructions per access.
addi a1, zero, 20
sw a1, %lo(s+44)(a0)
lui a0, %hi(s+8)
addi a1, zero, 10
sw a1, %lo(s+8)(a0)
lui a0, %hi(s+80)
addi a1, zero, 30
sw a1, %lo(s+80)(a0)
Which will save one instruction per access.
Reviewers: asb, apazos
Reviewed By: asb
Subscribers: rbar, johnrusso, simoncook, jordy.potman.lists, niosHD, kito-cheng, shiva0217, zzheng, edward-jones, mgrang, apazos, asb, llvm-commits
Differential Revision: https://reviews.llvm.org/D46989
llvm-svn: 332641
Summary:
This patch implements MC support for tail psuedo instruction.
A follow-up patch implements the codegen support as well as handling of the indirect tail pseudo instruction.
Reviewers: asb, apazos
Reviewed By: asb
Subscribers: rbar, johnrusso, simoncook, jordy.potman.lists, sabuasal, niosHD, kito-cheng, shiva0217, zzheng, edward-jones, llvm-commits
Differential Revision: https://reviews.llvm.org/D46221
llvm-svn: 332634
The isReMaterlizable flag is somewhat confusing, unlike most other instruction
flags it is currently interpreted as a hint (mightBeRematerializable would be
a better name). While LUI is always rematerialisable, for an instruction like
ADDI it depends on its operands. TargetInstrInfo::isTriviallyReMaterializable
will call TargetInstrInfo::isReallyTriviallyReMaterializable, which in turn
calls TargetInstrInfo::isReallyTriviallyReMaterializableGeneric. We rely on
the logic in the latter to pick out instances of ADDI that really are
rematerializable.
The isReMaterializable flag does make a difference on a variety of test
programs. The recently committed remat.ll test case demonstrates how stack
usage is reduce and a unnecessary lw/sw can be removed. Stack usage in the
Proc0 function in dhrystone reduces from 192 bytes to 112 bytes.
For the sake of completeness, this patch also implements
RISCVRegisterInfo::isConstantPhysReg. Although this is called from a number of
places, it doesn't seem to result in different codegen for any programs I've
thrown at it. However, it is called in the rematerialisation codepath and it
seems sensible to implement something correct here.
Differential Revision: https://reviews.llvm.org/D46182
llvm-svn: 332617
These directives are recognised by gas. Support is added through the use of
addAliasForDirective.
Also match RISC-V gcc in preferring .half and .word for 16-bit and 32-bit data
directives.
llvm-svn: 332574
1. Deine FeatureRelax to enable/disable linker relaxation.
2. Define shouldForceRelocation to preserve relocation types even if the fixup
can be resolved when linker relaxation enabled. This is necessary for
correctness as offsets may change during relaxation.
Differential Revision: https://reviews.llvm.org/D46674
llvm-svn: 332318
The DEBUG() macro is very generic so it might clash with other projects.
The renaming was done as follows:
- git grep -l 'DEBUG' | xargs sed -i 's/\bDEBUG\s\?(/LLVM_DEBUG(/g'
- git diff -U0 master | ../clang/tools/clang-format/clang-format-diff.py -i -p1 -style LLVM
- Manual change to APInt
- Manually chage DOCS as regex doesn't match it.
In the transition period the DEBUG() macro is still present and aliased
to the LLVM_DEBUG() one.
Differential Revision: https://reviews.llvm.org/D43624
llvm-svn: 332240
These directives allow the 'C' (compressed) extension to be enabled/disabled
within a single file.
Differential Revision: https://reviews.llvm.org/D45864
Patch by Kito Cheng
llvm-svn: 332107
Inspired by r331508, I did a grep and found these.
Mostly just change from dyn_cast to cast. Some cases also showed a dyn_cast result being converted to bool, so those I changed to isa.
llvm-svn: 331577
This causes some slight shuffling but no meaningful codegen differences on the
corpus I used for testing, but it has a larger impact when combined with e.g.
rematerialisation. Regardless, it makes sense to report as accurate
target-specific information as possible.
llvm-svn: 330949
I'm unable to construct a representative test case that demonstrates the
advantage, but it seems sensible to report accurate target-specific
information regardless.
llvm-svn: 330938
This has no impact on codegen for the current RISC-V unit tests or my small
benchmark set and very minor changes in a few programs in the GCC torture
suite. Based on this, I haven't been able to produce a representative test
program that demonstrates a benefit from isLegalAddressingMode. I'm committing
the patch anyway, on the basis that presenting accurate information to the
target-independent code is preferable to relying on incorrect generic
assumptions.
llvm-svn: 330932
Previously `call zero`, `call f0` etc would fail. This leads to compilation
failures if building programs that define functions with those names and using
-save-temps.
llvm-svn: 330846
To do this:
1. Change GlobalAddress SDNode to TargetGlobalAddress to avoid legalizer
split the symbol.
2. Change ExternalSymbol SDNode to TargetExternalSymbol to avoid legalizer
split the symbol.
3. Let PseudoCALL match direct call with target operand TargetGlobalAddress
and TargetExternalSymbol.
Differential Revision: https://reviews.llvm.org/D44885
llvm-svn: 330827
To do this:
1. Add PseudoCALLIndirct to match indirect function call.
2. Add PseudoCALL to support parsing and print pseudo `call` in assembly
3. Expand PseudoCALL to the following form with R_RISCV_CALL relocation type
while encoding:
auipc ra, func
jalr ra, ra, 0
If we expand PseudoCALL before emitting assembly, we will see auipc and jalr
pair when compile with -S. It's hard for assembly parser to parsing this
pair and identify it's semantic is function call and then insert R_RISCV_CALL
relocation type. Although we could insert R_RISCV_PCREL_HI20 and
R_RISCV_PCREL_LO12_I relocation types instead of R_RISCV_CALL.
Due to RISCV relocation design, auipc and jalr pair only can relax to jal with
R_RISCV_CALL + R_RISCV_RELAX relocation types.
We expand PseudoCALL as late as encoding(RISCVMCCodeEmitter) instead of before
emitting assembly(RISCVAsmPrinter) because we want to preserve call
pseudoinstruction in assembly code. It's more readable and assembly parser
could identify call assembly and insert R_RISCV_CALL relocation type.
Differential Revision: https://reviews.llvm.org/D45859
llvm-svn: 330826
Reverts rL330224, while issues with the C extension and missed common
subexpression elimination opportunities are addressed. Neither of these issues
are visible in current RISC-V backend unit tests, which clearly need
expanding.
llvm-svn: 330281
The implementation follows the MIPS backend and expands the
pseudo instruction directly during asm parsing. As the result, only
real MC instructions are emitted to the MCStreamer. Additionally,
PseudoLI instructions are emitted during codegen. The actual
expansion to real instructions is performed during MI to MC lowering
and is similar to the expansion performed by the GNU Assembler.
Differential Revision: https://reviews.llvm.org/D41949
Patch by Mario Werner.
llvm-svn: 330224
Summary:
Specifying assert message with an || operator makes the compiler interpret it
as a bool. Changed it to &&.
Reviewers: asb, apazos
Reviewed By: asb
Subscribers: rbar, johnrusso, simoncook, jordy.potman.lists, sabuasal, niosHD, kito-cheng, shiva0217, zzheng, llvm-commits
Differential Revision: https://reviews.llvm.org/D45660
llvm-svn: 330148
Summary:
GCC compresses the pseudo instruction "mv rd, rs", which is an alias of
"addi rd, rs, 0", to "c.mv rd, rs".
In LLVM we rely on the canonical MC instruction (MCInst) to do our compression
checks and since there is no rule to compress "addi rd, rs, 0" --> "c.mv
rd, rs" we lose this compression opportunity to gcc.
In this patch we fix that by adding an addi to c.mv compression pattern, the
instruction "mv rd, rs" will be compressed to "c.mv rd, rs" just like
gcc does.
Patch by Zhaoshi Zheng (zzheng) and Sameer (sabuasal).
Reviewers: asb, apazos, zzheng, mgrang, shiva0217
Reviewed By: asb
Subscribers: rbar, johnrusso, simoncook, jordy.potman.lists, niosHD, kito-cheng, llvm-commits
Differential Revision: https://reviews.llvm.org/D45583
llvm-svn: 329939
Summary:
According RISC-V ELF psABI specification, base RV32 and RV64 ISAs only
allow 32-bit instruction alignment, but instruction allow to be aligned
to 16-bit boundaries for C-extension.
So we just align to 4 bytes and 2 bytes for C-extension is enough.
Reviewers: asb, apazos
Differential Revision: https://reviews.llvm.org/D45560
Patch by Kito Cheng.
llvm-svn: 329899
Also add double-prevoius-failure.ll which captures a test case that at one
point triggered a compiler crash, while developing calling convention support
for f64 on RV32D with soft-float ABI.
llvm-svn: 329877
fadd.d is required in order to force floating point registers to be used in
test code, as parameters are passed in integer registers in the soft float
ABI.
Much of this patch is concerned with support for passing f64 on RV32D with a
soft-float ABI. Similar to Mips, introduce pseudoinstructions to build an f64
out of a pair of i32 and to split an f64 to a pair of i32. BUILD_PAIR and
EXTRACT_ELEMENT can't be used, as a BITCAST to i64 would be necessary, but i64
is not a legal type.
llvm-svn: 329871
Summary:
This patch implements a tablegen-driven Instruction Compression
mechanism for generating RISCV compressed instructions
(C Extension) from the expanded instruction form.
This tablegen backend processes CompressPat declarations in a
td file and generates all the compile-time and runtime checks
required to validate the declarations, validate the input
operands and generate correct instructions.
The checks include validating register operands, immediate
operands, fixed register operands and fixed immediate operands.
Example:
class CompressPat<dag input, dag output> {
dag Input = input;
dag Output = output;
list<Predicate> Predicates = [];
}
let Predicates = [HasStdExtC] in {
def : CompressPat<(ADD GPRNoX0:$rs1, GPRNoX0:$rs1, GPRNoX0:$rs2),
(C_ADD GPRNoX0:$rs1, GPRNoX0:$rs2)>;
}
The result is an auto-generated header file
'RISCVGenCompressEmitter.inc' which exports two functions for
compressing/uncompressing MCInst instructions, plus
some helper functions:
bool compressInst(MCInst& OutInst, const MCInst &MI,
const MCSubtargetInfo &STI,
MCContext &Context);
bool uncompressInst(MCInst& OutInst, const MCInst &MI,
const MCRegisterInfo &MRI,
const MCSubtargetInfo &STI);
The clients that include this auto-generated header file and
invoke these functions can compress an instruction before emitting
it, in the target-specific ASM or ELF streamer, or can uncompress
an instruction before printing it, when the expanded instruction
format aliases is favored.
The following clients were added to implement compression\uncompression
for RISCV:
1) RISCVAsmParser::MatchAndEmitInstruction:
Inserted a call to compressInst() to compresses instructions
parsed by llvm-mc coming from an ASM input.
2) RISCVAsmPrinter::EmitInstruction:
Inserted a call to compressInst() to compress instructions that
were lowered from Machine Instructions (MachineInstr).
3) RVInstPrinter::printInst:
Inserted a call to uncompressInst() to print the expanded
version of the instruction instead of the compressed one (e.g,
add s0, s0, a5 instead of c.add s0, a5) when -riscv-no-aliases
is not passed.
This patch squashes D45119, D42780 and D41932. It was reviewed in smaller patches by
asb, efriedma, apazos and mgrang.
Reviewers: asb, efriedma, apazos, llvm-commits, sabuasal
Reviewed By: sabuasal
Subscribers: mgorny, eraman, asb, rbar, johnrusso, simoncook, jordy.potman.lists, apazos, niosHD, kito-cheng, shiva0217, zzheng
Differential Revision: https://reviews.llvm.org/D45385
llvm-svn: 329455
Makes it easier to see mistakes such as the one fixed in r329178 and makes
the different target CMakeLists more consistent.
Also remove some stale-looking comments from the Nios2 target cmakefile.
No intended behavior change.
llvm-svn: 329181
