Summary:
When clang is given -save-temps or -via-file-asm, any inline assembly in
the source is parsed twice. Once by the compiler, and again by the
assembler. We must take care to ensure that this doesn't lead to
double-filling delay slots.
Reviewers: sdardis, vkalintiris
Subscribers: dsanders, sdardis, llvm-commits
Differential Revision: http://reviews.llvm.org/D19166
llvm-svn: 266608
Alias 'jic $reg, 0' to 'jrc $reg' and 'jialc $reg, 0' to 'jalrc $reg' like
binutils.
This patch was previous committed as r266055 as seemed to have caused some spurious
test failures. They did not reappear after further local testing.
llvm-svn: 266301
Differential Revision: http://reviews.llvm.org/D17137
This patch was reverted after the revertion of dependant patch http://reviews.llvm.org/D17068.
There was the problem with test-suite failure.
The problem is hopefully solved with dependant patch so this patch is commited again.
llvm-svn: 266179
This patch enables assembler support for .set arch=octeon.
It will fix issues with inline assembler when this directive is used.
Patch by Strahinja Petrovic.
Differential Revision: http://reviews.llvm.org/D18548
llvm-svn: 266081
Summary:
Alias 'jic $reg, 0' to 'jrc $reg' and 'jialc $reg, 0' to 'jalrc $reg' like
binutils.
Reviewers: dsanders
Differential Revision: http://reviews.llvm.org/D18856
llvm-svn: 266055
This patch adds support for compact jumps similiar to the previous compact
branch support for MIPSR6. Unlike compact branches, compact jumps do not
have a forbidden slot.
As MipsInstrInfo::getEquivalentCompactForm can determine the correct
expansion for jumps and branches for both microMIPS and MIPSR6, remove the
unnecessary distinction in the delay slot filler.
Reviewers: vkalintiris
Subscribers: llvm-commits, dsanders
llvm-svn: 265390
Summary:
At this point we should be able to enable IAS by default for O32 without
breaking check-all, or recursion.
Reviewers: vkalintiris
Subscribers: dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D18439
llvm-svn: 265302
Summary: The assembler was picking the wrong JR variant because the pre-R6 one was still enabled at R6.
Author: nitesh.jain
Reviewers: vkalintiris, dsanders
Subscribers: dsanders, llvm-commits, mohit.bhakkad, sagar, bhushan, jaydeep
Differential: D18387
llvm-svn: 265134
Summary:
There are too many instructions to exhaustively test so addiu and lwc2 are
used as representative examples.
It should be noted that many memory instructions that should have simm16
range checking do not because it is also necessary to support the macro
of the same name which accepts simm32. The range checks for these occur in
the macro expansion.
Reviewers: vkalintiris
Subscribers: dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D18437
llvm-svn: 265019
Summary:
ldc2/sdc2 now emit slightly worse diagnostics for MIPS-I. The problem
is that they don't trigger the custom parser because all the candidates
are disabled by feature bits. On all other subtargets, the diagnostics are
accurate but are subject to the usual issues of needing to report multiple
ways to correct the code (e.g. smaller offset, enable a CPU feature) but
only being able to report one error.
Reviewers: vkalintiris
Subscribers: dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D18436
llvm-svn: 265018
Summary:
Also, made test_mi10.s formatting consistent with the majority of the
MC tests.
Reviewers: vkalintiris
Subscribers: dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D18435
llvm-svn: 265014
Summary:
The bug was that microMIPS's [ls]w[lr]e instructions claimed to support a
12-bit offset when it is only 9-bit.
Reviewers: vkalintiris
Subscribers: llvm-commits, dsanders
Differential Revision: http://reviews.llvm.org/D18434
llvm-svn: 265010
The `MipsMCInstrAnalysis` class overrides the `evaluateBranch` method
and calculates target addresses for branch and calls instructions.
That allows llvm-objdump to print functions' names in branch instructions
in the disassemble mode.
Differential Revision: http://reviews.llvm.org/D18209
llvm-svn: 264309
The patch supports common STV_xxx visibility flags and MIPS specific
STO_MIPS_xxx flags.
Differential Revision: http://reviews.llvm.org/D18447
llvm-svn: 264300
Summary:
Also renamed li_simm7 to li16_imm since it's not a simm7 and has an unusual
encoding (it's a uimm7 except that 0x7f represents -1).
Reviewers: vkalintiris
Subscribers: dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D18145
llvm-svn: 264056
Summary:
We can't check the error message for this one because there's another lw/sw
available that covers a larger range. We therefore check the transition
between the two sizes.
Reviewers: vkalintiris
Subscribers: llvm-commits, dsanders
Differential Revision: http://reviews.llvm.org/D18144
llvm-svn: 264054
That allows, for example, to print hex-formatted immediates using
llvm-objdump --print-imm-hex command line option.
Differential Revision: http://reviews.llvm.org/D18195
llvm-svn: 263704
Summary:
The bug was that dextu's operand 3 would print 0-31 instead of 32-63 when
printing assembly. This came up when replacing
MipsInstPrinter::printUnsignedImm() with a version that could handle arbitrary
bit widths.
MipsAsmPrinter::printUnsignedImm*() don't seem to be used so they have been
removed.
Reviewers: vkalintiris
Subscribers: dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D15521
llvm-svn: 262231
Summary:
Previously, it would always select DEXT and substitute any invalid matches
for DEXTU/DEXTM during MipsMCCodeEmitter::encodeInstruction(). This works
but causes problems when adding range checked immediates to IAS.
Now isel selects the correct variant up front.
Reviewers: vkalintiris
Subscribers: dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D16810
llvm-svn: 262229
This section is used for debug information and has no need to be
in memory at runtime. This patch also fixes an error when compiling
the Linux kernel. The error is that there are relocations within the
.pdr section in a VDSO. SHT_REL was removed as it is a section type
and not a section flag, therefore it does not make sense for it to
be there. With this patch, LLVM now emits the same flags as
the GNU assembler.
llvm-svn: 261083
Summary:
In order to pass the tests, this required marking R_MIPS_16 relocations
as needing to point to the symbol and not the section.
Reviewers: vkalintiris, dsanders
Subscribers: dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D17200
llvm-svn: 260896
Summary:
This section is used for debug information and has no need to be
in memory at runtime. With this patch, LLVM now emits the same flags as
the GNU assembler. This patch also fixes an error when compiling
the Linux kernel, The error is that there are relocations within the
.pdr section in a VDSO.
Reviewers: vkalintiris, dsanders
Subscribers: llvm-commits, dsanders
Differential Revision: http://reviews.llvm.org/D17199
llvm-svn: 260879
Summary:
Fixed an issue for mips with an instruction such as 'sdc1 $f1, 272 +8(a0)' which has a space between '272' and '+'. The parser would then parse '272' and '+8' as two arguments instead of a single expression resulting in one too many arguments in the pseudo instruction.
The reason that the test case has been changed is so that the expected
output matches the output of the GNU assembler.
Reviewers: vkalintiris, dsanders
Subscribers: dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D13592
llvm-svn: 260521
Now the parser supports `%got(sym)` expressions only but `%got(sym + const)`
variant is also valid and accepted by GAS.
Differential Revision: http://reviews.llvm.org/D16885
llvm-svn: 260305
Summary:
The bugs were:
* teq and similar take 4-bit unsigned immediates on microMIPS.
* teqi and similar have side-effects like teq do.
* shll_s.w and shra_r.w take 5-bit unsigned immediates.
* The various DSP ext* instructions take a 5-bit immediate.
* repl.qh takes an 8-bit unsigned immediate.
* repl.ph takes a 10-bit unsigned immediate.
* rddsp/wrdsp take a 10-bit unsigned immediate.
* teqi and similar take signed 16-bit immediates (10-bit for microMIPS).
* Out-of-range immediate macros for or/xor take a simm32/simm64 depending
on architecture. I'll fix the simm64 case properly when I reach simm32.
lui is a bit more lenient than GAS and accepts signed immediates in addition
to unsigned. This is because MipsMCExpr can produce signed values when
constant folding and it currently lacks a way of knowing it should fold to
an unsigned value.
Reviewers: vkalintiris
Subscribers: dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D15446
llvm-svn: 259360
Summary:
This is now the same as the behaviour of the GNU assembler. This was done
as it is required in order to build the Linux kernel with the integrated
assembler enabled.
Reviewers: dsanders, vkalintiris
Subscribers: dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D13594
llvm-svn: 258400
Summary:
It actually takes an offset into the current PC-region.
This fixes the 'expr' command in lldb.
Reviewers: vkalintiris, jaydeep, bhushan
Subscribers: dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D16054
llvm-svn: 257339
Commited patch was intended to implement LH, LHE, LHU and LHUE instructions.
After commit test-suite failed with error message in the form of:
fatal error: error in backend: Cannot select: t124: i32,ch = load<LD2[%d](tbaa=<0x94acc48>), sext from i16> t0, t2, undef:i32
For that reason I decided to revert commit r254897 and make new patch which besides implementation and standard regression tests will also have dedicated tests (CodeGen) for the above error.
llvm-svn: 255109
Summary:
We don't check the size operand on ext/dext*/ins/dins* yet because the
permitted range depends on the pos argument and we can't check that using
this mechanism.
The bug was that dextu/dinsu accepted 0..31 in the pos operand instead of 32..63.
Reviewers: vkalintiris
Subscribers: llvm-commits, dsanders
Differential Revision: http://reviews.llvm.org/D15190
llvm-svn: 255015
Summary:
valid-xfail.s is for instructions that should be valid in the given ISA but
incorrectly fail. DSP/DSPr2 instructions are correct to fail since DSP/DSPr2 is
not enabled.
Reviewers: vkalintiris
Subscribers: dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D15072
llvm-svn: 254911
Value of offset operand for microMIPS BALC and BC instructions is currently shifted 2 bits, but it should be 1 bit.
Differential Revision: http://reviews.llvm.org/D14770
llvm-svn: 254296
valid-xfail.s is for instructions that should be valid in the given ISA but
incorrectly fail. MSA instructions are correct to fail since MSA is not enabled.
llvm-svn: 254293
Summary:
The bugs were:
* append, prepend, and balign were not tested
* balign takes a uimm2 not a uimm5.
* drotr32 was correctly implemented with a uimm5 but the tests expected
'52' to be valid.
* li/la were implemented with a uimm5 instead of simm32. simm32 isn't
completely correct either but I'll fix that when I get to simm32.
A notable omission are some of the shift instructions. Several of these
have been implemented using a single uimm6 instruction (rather than two
uimm5 instructions and a CodeGen-only uimm6 pseudo). These will be updated
in the uimm6 patch.
Reviewers: vkalintiris
Subscribers: llvm-commits, dsanders
Differential Revision: http://reviews.llvm.org/D14712
llvm-svn: 254164
Currently, if the assembler encounters an error after parsing (such as an
out-of-range fixup), it reports this as a fatal error, and so stops after the
first error. However, for most of these there is an obvious way to recover
after emitting the error, such as emitting the fixup with a value of zero. This
means that we can report on all of the errors in a file, not just the first
one. MCContext::reportError records the fact that an error was encountered, so
we won't actually emit an object file with the incorrect contents.
Differential Revision: http://reviews.llvm.org/D14717
llvm-svn: 253328
This adds reportError to MCContext, which can be used as an alternative to
reportFatalError when the assembler wants to try to continue processing the
rest of the file after the error is reported, so that all of the errors ina
file can be reported. It records the fact that an error was encountered, so we
can avoid emitting an object file if any errors occurred.
This patch doesn't add any uses of this function (a later patch will convert
most uses of reportFatalError to use it), but there is a small functional
change: we use the SourceManager to print the error message, even if we have a
null SMLoc. This means that we get a SourceManager-style message, with the file
and line information shown as <unknown>, rather than the "LLVM ERROR" style
used by report_fatal_error.
llvm-svn: 253327
Summary:
Support for R_MIPS_NONE allows us to parse MIPS16's usage of .reloc.
R_MIPS_32 was included to be able to better test the directive.
Targets can add their relocations by overriding MCAsmBackend::getFixupKind().
Subscribers: grosbach, rafael, majnemer, dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D13659
llvm-svn: 252888
Summary:
Only DSPr2 is present because it appears we've never added DSPr1 tests.
We'll have to correct that in a later patch.
Reviewers: vkalintiris
Subscribers: llvm-commits, dsanders
Differential Revision: http://reviews.llvm.org/D14448
llvm-svn: 252752
Summary:
The bug was that the sldi instructions have immediate widths dependant on
their element size. So sldi.d has a 1-bit immediate and sldi.b has a 4-bit
immediate. All of these were using 4-bit immediates previously.
Reviewers: vkalintiris
Subscribers: llvm-commits, atanasyan, dsanders
Differential Revision: http://reviews.llvm.org/D14018
llvm-svn: 252297
Summary:
The bug was that the MIPS32R6/MIPS64R6/microMIPS32R6 versions of LSA and DLSA
(unlike the MSA version) failed to account for the off-by-one encoding of the
immediate. The range is actually 1..4 rather than 0..3.
Reviewers: vkalintiris
Subscribers: atanasyan, dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D14015
llvm-svn: 252295
Summary:
The forwards compatibility strategy employed by MIPS is to consider registers
to be infinitely sign-extended. Then on ISA's with a wider register, the result
of existing instructions are sign-extended to register width and zero-extended
counterparts are added. copy_u.w on MSA32 and copy_u.w on MSA64 violate this
strategy and we have therefore corrected the MSA specs to fix this.
We still keep track of sign/zero-extension during legalization but we now
match copy_s.[wd] where required.
No change required to clang since __builtin_msa_copy_u_[wd] will map to
copy_s.[wd] where appropriate for the target.
Reviewers: vkalintiris
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D13472
llvm-svn: 250887
Summary:
This macro is needed to prevent test/CodeGen/Mips/2008-08-01-AsmInline.ll from
failing after the integrated assembler is enabled by default.
Reviewers: vkalintiris
Subscribers: llvm-commits, dsanders
Differential Revision: http://reviews.llvm.org/D13654
llvm-svn: 250414
