This expands the cost model test for min/max to many more types,
including floating point minnum/maxnum and minimum/maximum, and FP16
with and without fullfp16. The old llc run lines are removed, as those
are better tested by CodeGen tests.
The getOrderedReductionCost implementation introduced in D105432 calls the CRTP base version getArithmeticInstrCost instead of the redirecting to the target version.
Differential Revision: https://reviews.llvm.org/D106795
I have added a new FastMathFlags parameter to getArithmeticReductionCost
to indicate what type of reduction we are performing:
1. Tree-wise. This is the typical fast-math reduction that involves
continually splitting a vector up into halves and adding each
half together until we get a scalar result. This is the default
behaviour for integers, whereas for floating point we only do this
if reassociation is allowed.
2. Ordered. This now allows us to estimate the cost of performing
a strict vector reduction by treating it as a series of scalar
operations in lane order. This is the case when FP reassociation
is not permitted. For scalable vectors this is more difficult
because at compile time we do not know how many lanes there are,
and so we use the worst case maximum vscale value.
I have also fixed getTypeBasedIntrinsicInstrCost to pass in the
FastMathFlags, which meant fixing up some X86 tests where we always
assumed the vector.reduce.fadd/mul intrinsics were 'fast'.
New tests have been added here:
Analysis/CostModel/AArch64/reduce-fadd.ll
Analysis/CostModel/AArch64/sve-intrinsics.ll
Transforms/LoopVectorize/AArch64/strict-fadd-cost.ll
Transforms/LoopVectorize/AArch64/sve-strict-fadd-cost.ll
Differential Revision: https://reviews.llvm.org/D105432
When BasicTTIImpl::getCastInstrCost can't determine the cost of a
vector cast operation when the types need legalization, it falls
back to calculating scalarization costs. Instead of crashing on
`cast<FixedVectorType>(DstVTy)` when the type is a scalable vector,
return an Invalid cost.
Reviewed By: david-arm
Differential Revision: https://reviews.llvm.org/D106655
This adds some missing single source shuffle costs for AArch64, of i16
and i8 vectors. v4i16 are the same as v4i32 with a worse case cost of 3
coming from the perfect shuffle tables. The larger vector sizes expand
into a constant pool, plus a load (and adrp) and a tbl. I arbitrarily
chose 8 for the cost to be expensive but not too expensive.
Differential Revision: https://reviews.llvm.org/D106241
Update shl/lshr/ashr costs based on the worst case costs from the script in D103695 - many of the 128-bit shifts (usually where integer multiplies aren't used) have similar behaviour to AVX1 so we can merge them.
This changes the cost to (LT.first-1) * cost(add) + 2, where the cost of
an add is assumed to be 1. This brings it inline with the other
reductions.
Differential Revision: https://reviews.llvm.org/D106240
At the moment, <vscale x 1 x eltty> are not yet fully handled by the
code-generator, so to avoid vectorizing loops with that VF, we mark the
cost for these types as invalid.
The reason for not adding a new "TTI::getMinimumScalableVF" is because
the type is supposed to be a type that can be legalized. It partially is,
although the support for these types need some more work.
Reviewed By: paulwalker-arm, dmgreen
Differential Revision: https://reviews.llvm.org/D103882
We know that "CVTTPS2SI" returns 0x80000000 for out of range inputs (and for FP_TO_UINT, negative float values are undefined). We can use this to make unsigned conversions from vXf32 to vXi32 more efficient, particularly on targets without blend using the following logic:
small := CVTTPS2SI(x);
fp_to_ui(x) := small | (CVTTPS2SI(x - 2^31) & ARITHMETIC_RIGHT_SHIFT(small, 31))
Even on targets where "PBLENDVPS"/"PBLENDVB" exists, it is often a latency 2, low throughput instruction so this logic is applied there too (in particular for AVX2 also). It furthermore gets rid of one high latency floating point comparison in the previous lowering.
@TomHender checked the correctness of this for all possible floats between -1 and 2^32 (both ends excluded).
Original Patch by @TomHender (Tom Hender)
Differential Revision: https://reviews.llvm.org/D89697
Update (mainly) vXf32/vXf64 -> vXi8/vXi16 fptosi/fptoui costs based on the worst case costs from the script in D103695.
Move to using legalized types wherever possible, which allows us to prune the cost tables.
Update truncation costs based on the worst case costs from the script in D103695.
Move to using legalized types wherever possible, which allows us to prune the cost tables.
This patch removes the IsPairwiseForm flag from the Reduction Cost TTI
hooks, along with some accompanying code for pattern matching reductions
from trees starting at extract elements. IsPairWise is now assumed to be
false, which was the predominant way that the value was used from both
the Loop and SLP vectorizers. Since the adjustments such as D93860, the
SLP vectorizer has not relied upon this distinction between paiwise and
non-pairwise reductions.
This also removes some code that was detecting reductions trees starting
from extract elements inside the costmodel. This case was
double-counting costs though, adding the individual costs on the
individual instruction _and_ the total cost of the reduction. Removing
it changes the costs in llvm/test/Analysis/CostModel/X86/reduction.ll to
not double count. The cost of reduction intrinsics is still tested
through the various tests in
llvm/test/Analysis/CostModel/X86/reduce-xyz.ll.
Differential Revision: https://reviews.llvm.org/D105484
The Legalizer expands the operations of urem/srem into a div+mul+sub or divrem
when those are legal/custom. This patch changes the cost-model to reflect that
cost.
Since there is no 'divrem' Instruction in LLVM IR, the cost of divrem
is assumed to be the same as div+mul+sub since the three operations will
need to be executed at runtime regardless.
Patch co-authored by David Sherwood (@david-arm)
Reviewed By: RKSimon, paulwalker-arm
Differential Revision: https://reviews.llvm.org/D103799
Update costs based on the worst case costs from the script in D103695.
Move to using legalized types wherever possible, which allows us to prune the cost tables.
Update (mainly) vXi8/vXi16 -> vXf32/vXf64 sitofp/uitofp costs based on the worst case costs from the script in D103695.
Move to using legalized types wherever possible, which allows us to prune the cost tables.
Provide a generic fallback that performs the fptosi to i32 types, then truncates to sub-i32 scalars.
These numbers can be tweaked for specific sse levels, but we should get the default handling in place first.
Provide a generic fallback that extends sub-i32 scalars before using the existing sitofp instructions.
These numbers can be tweaked for specific sse levels, but we should get the default handling in place first.
We get the extension for free for non-vector loads.
This patch adds a new ShuffleKind SK_Splice and then handle the cost in
getShuffleCost, as in experimental.vector.reverse.
Differential Revision: https://reviews.llvm.org/D104630
Loads of <4 x i8> vectors were modeled as extremely expensive. And while we
don't have a load instruction that supports this, it isn't that expensive to
create a vector of i8 elements. The codegen for this was fixed/optimised in
D105110. This now tweaks the cost model and enables SLP vectorisation of my
motivating case loadi8.ll.
Differential Revision: https://reviews.llvm.org/D103629
Update v4i64 -> v4f32/v4f64 uitofp costs based on the worst case costs from the script in D103695.
Fixes a few regressions before we start adding AVX costs for legalized types.
Building on rG2a1ef8784ad9a, adjust the SSE cost tables to use the legalized types based on the worst case costs from the script in D103695.
To account for different numbers of src/dst legalized type registers we must scale the cost by maximum of the src/dst, not just use src
Move the (SSE-only) generic, legalized type conversion matching after the specific,custom conversion cases, allowing us to properly provide cost overrides.
The next step will be to clean up some of the weird existing costs and then to enable AVX+ legalized costs, which will let us strip out a lot of the cost tables entries.
Based off the worse case numbers generated by D103695, the AVX1/2/512 sitofp/uitofp/fptosi/fptoui costs were higher than necessary (based off instruction counts instead of actual throughput).
The SSE costs still need further fixes, but I hit an issue with the order in which SSE costs are checked - we need to check CUSTOM costs (with non-legal types) first, and then fallback to LEGALIZED types. I'm looking at this now, and this should let us start thinning out a lot of the duplicates in the costs tables.
Then we can finally start work on vXi64 / vXi16 / vXi8 / vXi1 integers, which should let us look at sub-128-bit vectorization (D103925).
Details: https://reviews.llvm.org/D96805 changed the GCNTTIImpl::getCFInstrCost to return 1 for the PHI nodes
for the TTI::TCK_CodeSize and TTI::TCK_SizeAndLatency. This is incorrect because the value moves that are the
result of the PHI lowering are inserted into the basic block predecessors - not into the block itself.
As a result of this change LoopRotate and LoopUnroll were broken because of the incorrect Loop header and loop
body size/cost estimation.
Reviewed By: rampitec
Differential Revision: https://reviews.llvm.org/D105104
OR, XOR and AND entries are added to the cost table. An extra cost
is added when vector splitting occurs.
This is done to address the issue of a missed SLP vectorization
opportunity due to unreasonably high costs being attributed to the vector
Or reduction (see: https://bugs.llvm.org/show_bug.cgi?id=44593).
Differential Revision: https://reviews.llvm.org/D104538
This can be seen as a follow up to commit 0ee439b705e82a4fe20e2,
that changed the second argument of __powidf2, __powisf2 and
__powitf2 in compiler-rt from si_int to int. That was to align with
how those runtimes are defined in libgcc.
One thing that seem to have been missing in that patch was to make
sure that the rest of LLVM also handle that the argument now depends
on the size of int (not using the si_int machine mode for 32-bit).
When using __builtin_powi for a target with 16-bit int clang crashed.
And when emitting libcalls to those rtlib functions, typically when
lowering @llvm.powi), the backend would always prepare the exponent
argument as an i32 which caused miscompiles when the rtlib was
compiled with 16-bit int.
The solution used here is to use an overloaded type for the second
argument in @llvm.powi. This way clang can use the "correct" type
when lowering __builtin_powi, and then later when emitting the libcall
it is assumed that the type used in @llvm.powi matches the rtlib
function.
One thing that needed some extra attention was that when vectorizing
calls several passes did not support that several arguments could
be overloaded in the intrinsics. This patch allows overload of a
scalar operand by adding hasVectorInstrinsicOverloadedScalarOpd, with
an entry for powi.
Differential Revision: https://reviews.llvm.org/D99439
Added a case for CTPOP to AArch64TTIImpl::getIntrinsicInstrCost so that
the cost estimate matches the codegen in
test/CodeGen/AArch64/arm64-vpopcnt.ll
Differential Revision: https://reviews.llvm.org/D103952
Fixes getTypeConversion to return `TypeScalarizeScalableVector` when a scalable vector
type cannot be legalized by widening/splitting. When this is the method of legalization
found, getTypeLegalizationCost will return an Invalid cost.
The getMemoryOpCost, getMaskedMemoryOpCost & getGatherScatterOpCost functions already call
getTypeLegalizationCost and will now also return an Invalid cost for unsupported types.
Reviewed By: sdesmalen, david-arm
Differential Revision: https://reviews.llvm.org/D102515
Based off the worse case numbers generated by D103695, we were overestimating the cost of a number of vector truncations:
AVX2: v2i32->v2i8, v2i64->v2i16 + v4i64->v4i32
AVX1: v2i32->v2i8, v4i64->v4i16 + v16i16->v16i8
Once we have a working set of conversion costs, the intention is to cleanup the tables and use legalized types a lot more to reduce the number of entries we currently have.
* Merged some functions into a single function, to make the costs more obvious.
* Moved scalable-mem-op-cost-model.ll -> sve-ldst.ll to be more consistent with other filenames.
This fixes an issue in BasicTTIImpl.h where it tries to do a
cast<FixedVectorType> on a scalable vector type in order to get the
scalarization cost. Because scalarization of scalable vectors is not
supported, we return Invalid instead.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D103798
RVV vectors must be aligned to their element types, so anything less is
unaligned.
For regular loads and stores, our custom-lowering of fixed-length
vectors meant that we opted out of LegalizeDAG's built-in unaligned
expansion. This patch adds that logic in to our custom lower function.
For masked intrinsics, we declare that anything unaligned is not legal,
leaving the ScalarizeMaskedMemIntrin pass to do the expansion for us.
Note that neither of these methods can handle the expansion of
scalable-vector memory ops, so those cases are left alone by this patch.
Scalable loads and stores already go through expansion by default but
hit an assertion, and scalable masked intrinsics will silently generate
incorrect code. It may be prudent to return an error in both of these
cases.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D102493
Determined from llvm-mca analysis (btver2 vs bdver2 vs sandybridge), the split+extends+concat sequence on AVX1 capable targets are cheaper than the #ops that the cost was previously based on.
The SkylakeServer model (and later IceLake/TigerLake targets according to Agner) have the PMOV truncations as uops=2, rthroughput=2 instructions.
Noticed while trying to reduce the diffs between cost tables and llvm-mca analysis.
