This patch generalizes the zeroing of vector elements with the BLEND instructions. Currently a zero vector will only blend if the shuffled elements are correctly inline, this patch recognises when a vector input is zero (or zeroable) and modifies a local copy of the shuffle mask to support a blend. As a zeroable vector input may not be all zeroes, the zeroable vector is regenerated if necessary.
Differential Revision: http://reviews.llvm.org/D14050
llvm-svn: 251659
This was discovered to be necessary while running memchr-01.ll with
-verify-machinstrs, because it is not allowed to have a phys reg live
accross block boundaries while on SSA form, if the register is
allocatable (expect in entry block and landing pads).
In this test case, stringRRE pseudos are expanded after isel by adding
a loop block which produces a live out CC register. To make the test
pass, it was also necessary to not say that StringRRELoop pseudo uses
R0L, this is only true for the StringRRE opcode.
-verify-machineinstrs added to memchr-01.ll test.
New test case int-cmp-51.ll to test that MachineCSE can eliminate
an identical compare (which it couldn't do before).
Reviewed by Ulrich Weigand
llvm-svn: 251634
Summary:
This commit resolves wrong opcodes for ll and sc instructions for r6 architecutres, which were generated in method MipsTargetLowering::emitAtomicBinary.
Author: Jelena.Losic
Reviewers: dsanders
Subscribers: dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D13593
llvm-svn: 251629
Summary:
ARMv6KZ cores were set up incorrectly in ARM.td; also, the SMI mnemonic
(the old name for SMC, as defined in ARMv6KZ) wasn't supported.
Reviewers: jmolloy, rengolin
Subscribers: aemerson, rengolin, llvm-commits
Differential Revision: http://reviews.llvm.org/D14154
llvm-svn: 251627
Summary:
The microMIPS register class GPRMM16 does not contain the $zero register.
However, MipsSEDAGToDAGISel::replaceUsesWithZeroReg() would replace uses
of the $dst register:
[d]addiu, $dst, $zero, 0
with the $zero register, without checking for membership in the register
class of the target machine operand.
Reviewers: dsanders
Subscribers: llvm-commits, dsanders
Differential Revision: http://reviews.llvm.org/D13984
llvm-svn: 251622
Summary:
Conversion opcode name format should be f64.convert_u/i64 not f64_convert_u
Author: s3ththompson
Reviewers: jfb
Subscribers: sunfish, jfb, llvm-commits, dschuff
Differential Revision: http://reviews.llvm.org/D14160
llvm-svn: 251613
We cannot form ctr-based loops around function calls, including calls to
__tls_get_addr used for PIC TLS variables. References to such TLS variables,
however, might be buried within constant expressions, and so we need to search
the entire constant expression to be sure that no references to such TLS
variables exist.
Fixes PR25256, reported by Eric Schweitz. This is a slightly-modified version
of the patch suggested by Eric in the bug report, and a test case I created.
llvm-svn: 251582
As a follow-up to r251566, do the same for the other optionally-supported
register classes (mostly for vector registers). Don't return an unavailable
register class (which would cause an assert later), but fail cleanly when
provided an unsupported inline asm constraint.
llvm-svn: 251575
At the LLVM level this ABI is essentially a minimal modification of AAPCS to
support 16-byte alignment for vector types and the stack.
llvm-svn: 251570
These MachO file directives are used by linkers and other tools to provide
compatibility information, much like the existing .ios_version_min and
.macosx_version_min.
llvm-svn: 251569
Summary:
This patch handles assembly and disassembly, but not codegen, as of yet.
Additionally, it fixes a bug whereby SP and PC as shifted-reg operands
were treated as predictable in ARMv7 Thumb; and it enables the tests
for invalid and unpredictable instructions to run on both ARMv7 and ARMv8.
Reviewers: jmolloy, rengolin
Subscribers: aemerson, rengolin, llvm-commits
Differential Revision: http://reviews.llvm.org/D14141
llvm-svn: 251516
This also lets us remove the versions of the functions that took a statically sized array as we can rely on ArrayRef implicit conversion now.
llvm-svn: 251490
cntlz is the old POWER mnemonic. cntlzw is the PowerPC mnemonic.
This change fixes an issue when -no-integrated-as: The opcode cntlz is
unrecognized by gas
Alias the POWER mnemonic cntlz[.] to the PowerPC mnemonic cntlzw[.]
This is done for because the POWER cntlz mnemonic has be used by LLVM for
a very long time. We need to make sure that assembly programs
that are using the cntlz[.] do not break with this change.
Change PowerPC tests to reflect the insn change from cntlz to cntlzw.
Add assembly test to verify cntlz[.] is encoded correctly.
Patch by Tom Rix!
llvm-svn: 251489
This recommits r250719, which caused a failure in SPEC2000.gcc
because of the incorrect insert point for the new wider load.
Convert two halfword loads into a single 32-bit word load with bitfield extract
instructions. For example :
ldrh w0, [x2]
ldrh w1, [x2, #2]
becomes
ldr w0, [x2]
ubfx w1, w0, #16, #16
and w0, w0, #ffff
llvm-svn: 251438
When optimization is disabled, edge weights that are stored in MBB won't be used so that we don't have to store them. Currently, this is done by adding successors with default weight 0, and if all successors have default weights, the weight list will be empty. But that the weight list is empty doesn't mean disabled optimization (as is stated several times in MachineBasicBlock.cpp): it may also mean all successors just have default weights.
We should discourage using default weights when adding successors, because it is very easy for users to forget update the correct edge weights instead of using default ones (one exception is that the MBB only has one successor). In order to detect such usages, it is better to differentiate using default weights from the case when optimizations is disabled.
In this patch, a new interface addSuccessorWithoutWeight(MBB*) is created for when optimization is disabled. In this case, MBB will try to maintain an empty weight list, but it cannot guarantee this as for many uses of addSuccessor() whether optimization is disabled or not is not checked. But it can guarantee that if optimization is enabled, then the weight list always has the same size of the successor list.
Differential revision: http://reviews.llvm.org/D13963
llvm-svn: 251429
convert float to half with mask/maskz for the reg to reg version and mask for the reg to mem version (there is no maskz version for reg to mem).
Differential Revision: http://reviews.llvm.org/D14113
llvm-svn: 251409
Summary: After D13851 landed, we saw backend crashes when compiling the reduced test case included in this patch. The right fix seems to be to allow these vector types for expansion in instruction selection.
Reviewers: rengolin, t.p.northover
Subscribers: RKSimon, t.p.northover, aemerson, llvm-commits, rengolin
Differential Revision: http://reviews.llvm.org/D14082
llvm-svn: 251401
GNU tools require elfiamcu to take up the entire OS field, so, e.g.
i?86-*-linux-elfiamcu is not considered a legal triple.
Make us compatible.
Differential Revision: http://reviews.llvm.org/D14081
llvm-svn: 251390
This avoid mentioning the table name an extra time and allows the lookup to be done directly in the ifs by relying on the bool conversion of the pointer.
While there make use of ArrayRef and std::find_if.
llvm-svn: 251382
Summary:
Previously we maintained two separate switch statements that had to be kept in
sync. This patch merges them into a single switch.
Reviewers: vkalintiris
Subscribers: llvm-commits, dsanders
Differential Revision: http://reviews.llvm.org/D14012
llvm-svn: 251369
Both VLDRS and VLDRD fault if the memory is not 4 byte aligned, which wasn't
really being checked before, leading to faults at runtime.
llvm-svn: 251352
Android libc provides a fixed TLS slot for the unsafe stack pointer,
and this change implements direct access to that slot on AArch64 via
__builtin_thread_pointer() + offset.
This change also moves more code into TargetLowering and its
target-specific subclasses to get rid of target-specific codegen
in SafeStackPass.
This change does not touch the ARM backend because ARM lowers
builting_thread_pointer as aeabi_read_tp, which is not available
on Android.
The previous iteration of this change was reverted in r250461. This
version leaves the generic, compiler-rt based implementation in
SafeStack.cpp instead of moving it to TargetLoweringBase in order to
allow testing without a TargetMachine.
llvm-svn: 251324
In PIC mode we were previously computing global variable addresses (or GOT
entry addresses) by adding the PC, the PC-relative GOT displacement and
the GOT-relative symbol/GOT entry displacement. Because the latter two
displacements are fixed, we ended up performing one more addition than
necessary.
This change causes us to compute addresses using a single PC-relative
displacement, resulting in a shorter code sequence. This reduces code size
by about 4% in a recent build of Chromium for Android.
As a result of this change we no longer need to compute the GOT base address
in the ARM backend, which allows us to remove the Global Base Reg pass and
SDAG lowering for the GOT.
We also now no longer use the GOT when addressing a symbol which is known
to be defined in the same linkage unit. Specifically, the symbol must have
either hidden visibility or a strong definition in the current module in
order to not use the the GOT.
This is a change from the previous behaviour where we would use the GOT to
address externally visible symbols defined in the same module. I think the
only cases where this could matter are cases involving symbol interposition,
but we don't really support that well anyway.
Differential Revision: http://reviews.llvm.org/D13650
llvm-svn: 251322
Instead of XFAIL-ing the tests with the wrong usage of the "interrupt"
attribute, we should check that we emit the correct error messages to
the user.
llvm-svn: 251295
Summary:
This patch adds support for using the "interrupt" attribute on Mips
for interrupt handling functions. At this time only mips32r2+ with the
o32 ABI with the static relocation model is supported. Unsupported
configurations will be rejected
Patch by Simon Dardis (+ clang-format & some trivial changes to follow the
LLVM coding standards by me).
Reviewers: mpf, dsanders
Subscribers: dsanders, vkalintiris, llvm-commits
Differential Revision: http://reviews.llvm.org/D10768
llvm-svn: 251286
We didn't validate that the .word directive was given a sane value,
leading to crashes when we attempt to write out the object file.
Instead, perform some validation and issue a diagnostic pointing at the
start of the diagnostic.
llvm-svn: 251270
When the target does not support these intrinsics they should be converted to a chain of scalar load or store operations.
If the mask is not constant, the scalarizer will build a chain of conditional basic blocks.
I added isLegalMaskedGather() isLegalMaskedScatter() APIs.
Differential Revision: http://reviews.llvm.org/D13722
llvm-svn: 251237
When using the MCU psABI, compiler-generated library calls should pass
some parameters in-register. However, since inreg marking for x86 is currently
done by the front end, it will not be applied to backend-generated calls.
This is a workaround for PR3997, which describes a similar issue for -mregparm.
Differential Revision: http://reviews.llvm.org/D13977
llvm-svn: 251223
This adds support for the i?86-*-elfiamcu triple, which indicates the IAMCU psABI is used.
Differential Revision: http://reviews.llvm.org/D13977
llvm-svn: 251222
This patch adds support for lowering to the XOP VPROT / VPROTI vector bit rotation instructions.
This has required changes to the DAGCombiner rotation pattern matching to support vector types - so far I've only changed it to support splat vectors, but generalising this further is feasible in the future.
Differential Revision: http://reviews.llvm.org/D13851
llvm-svn: 251188
Summary:
The logic here isn't straightforward because our support for
TargetOptions::GuaranteedTailCallOpt.
Also fix a bug where we were allowing tail calls to cdecl functions from
fastcall and vectorcall functions. We were special casing thiscall and
stdcall callers rather than checking for any convention that requires
clearing stack arguments before returning.
Reviewers: hans
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D14024
llvm-svn: 251137
Summary:
When ARMFrameLowering::emitPopInst generates a "pop" instruction to restore the callee saved registers, it checks if the LR register is among them. If so, the function may decide to remove the basic block's terminator and replace it with a "pop" to the PC register instead of LR.
This leads to a problem when the block's terminator is preceded by a "llvm.debugtrap" call. The MI iterator points to the trap in such a case, which is also a terminator. If the function decides to restore LR to PC, it erroneously removes the trap.
Reviewers: asl, rengolin
Subscribers: aemerson, jfb, rengolin, dschuff, llvm-commits
Differential Revision: http://reviews.llvm.org/D13672
llvm-svn: 251123
Summary:
This ensures that BranchFolding (and similar) won't remove these blocks.
Also allow AsmPrinter::EmitBasicBlockStart to process MBBs which are
address-taken but do not have BBs that are address-taken, since otherwise
its call to getAddrLabelSymbolTableToEmit would fail an assertion on such
blocks. I audited the other callers of getAddrLabelSymbolTableToEmit
(and getAddrLabelSymbol); they all have BBs known to be address-taken
except for the call through getAddrLabelSymbol from
WinException::create32bitRef; that call is actually now unreachable, so
I've removed it and updated the signature of create32bitRef.
This fixes PR25168.
Reviewers: majnemer, andrew.w.kaylor, rnk
Subscribers: pgavlin, llvm-commits
Differential Revision: http://reviews.llvm.org/D13774
llvm-svn: 251113
It turned out not to improve any of our benchmarks but occasionally led
to increased register pressure and spilling.
Only enabling for the Cyclone CPU as the results on the cortex CPUs
give mixed results.
Differential Revision: http://reviews.llvm.org/D13708
llvm-svn: 251038
PR24686 identifies a problem where a relocation expression is invalid
when not all of the symbols in the expression can be locally
resolved. This causes the compiler to request a PC-relative half16ds
relocation, which is nonsensical for PowerPC. This patch recognizes
this situation and ensures we fail the assembly cleanly.
Test case provided by Anton Blanchard.
llvm-svn: 251027
Clang runtime failure was reported.
Assertion failed: (isExtended() && "Type is not extended!"), function getTypeForEVT
I'll need to add a proper handling for PointerType in masked load/store intrinsics.
llvm-svn: 250995
These were the cause of a verifier error when building 7zip with
-verify-machineinstrs. Running 'make check' with the verifier
triggered the same error on the test here so i've updated the test
to run the verifier on one of its runs instead of adding a new one.
While looking at this code, there was a stale comment that these
instructions were only used for disassembly. This probably used to
be the case, but they are now used in the 'ARM load / store optimization pass' too.
This reapplies r242300 which was reverted in r242428 due to bot failures.
Ultimately those failures were spurious and completely unrelated to this commit. I reverted this
at the time because it was thought to be at fault.
llvm-svn: 250969
There may be other use operands that also need their kill flags cleared.
This happens in a few tests when SIFoldOperands is moved after
PeepholeOptimizer.
PeepholeOptimizer rewrites cases that look like:
%vreg0 = ...
%vreg1 = COPY %vreg0
use %vreg1<kill>
%vreg2 = COPY %vreg0
use %vreg2<kill>
to use the earlier source to
%vreg0 = ...
use %vreg0
use %vreg0
Currently SIFoldOperands sees the copied registers, so there is
only one use. So far I haven't managed to come up with a test
that currently has multiple uses of a foldable VGPR -> VGPR copy.
llvm-svn: 250960
This was checking for a variety of situations that should
never happen. This saves a tiny bit of compile time.
We should not be selecting instructions with invalid operands in the
first place. Most of the time for registers copys are inserted
to the correct operand register class.
For VOP3, since all operand types are supported and literal
constants never are, we just need to verify the constant bus
requirements (all immediates should be legal inline ones).
The only possibly tricky case to maybe worry about is if when
legalizing operands in moveToVALU with s_add_i32 and similar
instructions. If the original s_add_i32 had a literal constant
and we need to replace it with v_add_i32_e64 we would have an
unsupported literal operand. However, I don't think we should worry
about that because SIFoldOperands should handle folding literal
constant operands into the SALU instructions based on the uses.
At SIFoldOperands time, the legality and profitability of
operand types is a bit different.
llvm-svn: 250951
Summary:
Previously, we were inserting an InlineAsm statement for each line of the
inline assembly. This works for GAS but it triggers prologue/epilogue
emission when IAS is in use. This caused:
.set noreorder
.cpload $25
to be emitted as:
.set push
.set reorder
.set noreorder
.set pop
.set push
.set reorder
.cpload $25
.set pop
which led to assembler errors and caused the test to fail.
The whitespace-after-comma changes included in this patch are necessary to
match the output when IAS is in use.
Reviewers: vkalintiris
Subscribers: rkotler, llvm-commits, dsanders
Differential Revision: http://reviews.llvm.org/D13653
llvm-svn: 250895
Summary:
The forwards compatibility strategy employed by MIPS is to consider registers
to be infinitely sign-extended. Then on ISA's with a wider register, the result
of existing instructions are sign-extended to register width and zero-extended
counterparts are added. copy_u.w on MSA32 and copy_u.w on MSA64 violate this
strategy and we have therefore corrected the MSA specs to fix this.
We still keep track of sign/zero-extension during legalization but we now
match copy_s.[wd] where required.
No change required to clang since __builtin_msa_copy_u_[wd] will map to
copy_s.[wd] where appropriate for the target.
Reviewers: vkalintiris
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D13472
llvm-svn: 250887
C/C++ code can declare an extern function, which will show up as an import in WebAssembly's output. It's expected that the linker will resolve these, and mark unresolved imports as call_import (I have a patch which does this in wasmate).
llvm-svn: 250875
Summary:
TargetLoweringBase::Expand is defined as "Try to expand this to other ops,
otherwise use a libcall." For ISD::UDIV and ISD::SDIV, the choice between
the two possibilities was defined in a rather convoluted way:
- if DIVREM is legal, expand to DIVREM
- if DIVREM has a custom lowering, expand to DIVREM
- if DIVREM libcall is defined and a remainder from the same division is
computed elsewhere, expand to a DIVREM libcall
- else, expand to a DIV libcall
This had the undesirable effect that if both DIV and DIVREM are implemented
as libcalls, then ISD::UDIV and ISD::SDIV are expanded to the heavier DIVREM
libcall, even when the remainder isn't used.
The new code adds a new LegalizeAction, TargetLoweringBase::LibCall, so that
backends can directly control whether they prefer an expansion or a conversion
to a libcall. This makes the generic lowering code even more generic,
allowing its reuse in a wider range of target-specific configurations.
The useful effect is that ARM backend will now generate a call
to __aeabi_{i,u}div rather than __aeabi_{i,u}divmod in cases where
it doesn't need the remainder. There's no functional change outside
the ARM backend.
Reviewers: t.p.northover, rengolin
Subscribers: t.p.northover, llvm-commits, aemerson
Differential Revision: http://reviews.llvm.org/D13862
llvm-svn: 250826
This wasn't doing anything useful. They weren't explicitly used
anywhere, and the RegScavenger ignores reserved registers.
This for some reason caused a random scheduling change in the test.
Getting the check lines to pass is too frustrating, and there's probably
not too much value in checking the vector case's operands N times.
llvm-svn: 250794
There are two things out of the ordinary in this commit. First, I made
a loop obviously "infinite" in HexagonInstrInfo.cpp. After checking if
an instruction was at the beginning of a basic block (in which case,
`break`), the loop decremented and checked the iterator for `nullptr` as
the loop condition. This has never been possible (the prev pointers are
always been circular, so even with the weird ilist/iplist
implementation, this isn't been possible), so I removed the condition.
Second, in HexagonAsmPrinter.cpp there was another case of comparing a
`MachineBasicBlock::instr_iterator` against `MachineBasicBlock::end()`
(which returns `MachineBasicBlock::iterator`). While not incorrect,
it's fragile. I switched this to `::instr_end()`.
All that said, no functionality change intended here.
llvm-svn: 250778
Convert two halfword loads into a single 32-bit word load with bitfield extract
instructions. For example :
ldrh w0, [x2]
ldrh w1, [x2, #2]
becomes
ldr w0, [x2]
ubfx w1, w0, #16, #16
and w0, w0, #ffff
llvm-svn: 250719
- Isolate the check for the existence of a stack frame into hasFP.
- Implement getFrameIndexReference for DWARF address computation.
- Use getFrameIndexReference for offset computation in eliminateFrameIndex.
- Preserve debug information for dynamically allocated stack objects.
- Prefer FP to access local objects at -O0.
- Add experimental code to skip allocframe when not strictly necessary
(disabled by default).
llvm-svn: 250718
Emit the CFI instructions after all code transformation have been done.
This will avoid any interference between CFI instructions and packetization.
llvm-svn: 250714
The mapping of these two intrinsics in ARMInstrInfo.td had a small
omission which lead to their operands not being validated/transformed
before being lowered into usat and ssat instructions. This can cause
incorrect instructions to be emitted.
I've also added tests for the remaining two saturating arithmatic
intrinsics @llvm.arm.qadd and @llvm.arm.qsub as they are missing
codegen tests.
llvm-svn: 250697
Originally I planned to use the same interface for masked gather/scatter and set isConsecutive to "false" in this case.
Now I'm implementing masked gather/scatter and see that the interface is inconvenient. I want to add interfaces isLegalMaskedGather() / isLegalMaskedScatter() instead of using the "Consecutive" parameter in the existing interfaces.
Differential Revision: http://reviews.llvm.org/D13850
llvm-svn: 250686
Add FastISel support for SSE4A scalar float / double non-temporal stores
Follow up to D13698
Differential Revision: http://reviews.llvm.org/D13773
llvm-svn: 250610
Summary:
This is a temporary hack until we get around to remapping the vreg
numbers to local numbers. Dead vregs cause bad numbering and make
consumers sad.
We could also just look at debug info an use named locals instead, but
vregs have to work properly anyways so there!
Reviewers: binji, sunfish
Subscribers: jfb, llvm-commits, dschuff
Differential Revision: http://reviews.llvm.org/D13839
llvm-svn: 250594
Our previous value of "16 + 8 + MaxCallFrameSize" for ParentFrameOffset
is incorrect when CSRs are involved. We were supposed to have a test
case to catch this, but it wasn't very rigorous.
The main effect here is that calling _CxxThrowException inside a
catchpad doesn't immediately crash on MOVAPS when you have an odd number
of CSRs.
llvm-svn: 250583
The motivation for this patch starts with PR20134:
https://llvm.org/bugs/show_bug.cgi?id=20134
void foo(int *a, int i) {
a[i] = a[i+1] + a[i+2];
}
It seems better to produce this (14 bytes):
movslq %esi, %rsi
movl 0x4(%rdi,%rsi,4), %eax
addl 0x8(%rdi,%rsi,4), %eax
movl %eax, (%rdi,%rsi,4)
Rather than this (22 bytes):
leal 0x1(%rsi), %eax
cltq
leal 0x2(%rsi), %ecx
movslq %ecx, %rcx
movl (%rdi,%rcx,4), %ecx
addl (%rdi,%rax,4), %ecx
movslq %esi, %rax
movl %ecx, (%rdi,%rax,4)
The most basic problem (the first test case in the patch combines constants) should also be fixed in InstCombine,
but it gets more complicated after that because we need to consider architecture and micro-architecture. For
example, AArch64 may not see any benefit from the more general transform because the ISA solves the sexting in
hardware. Some x86 chips may not want to replace 2 ADD insts with 1 LEA, and there's an attribute for that:
FeatureSlowLEA. But I suspect that doesn't go far enough or maybe it's not getting used when it should; I'm
also not sure if FeatureSlowLEA should also mean "slow complex addressing mode".
I see no perf differences on test-suite with this change running on AMD Jaguar, but I see small code size
improvements when building clang and the LLVM tools with the patched compiler.
A more general solution to the sext(add nsw(x, C)) problem that works for multiple targets is available
in CodeGenPrepare, but it may take quite a bit more work to get that to fire on all of the test cases that
this patch takes care of.
Differential Revision: http://reviews.llvm.org/D13757
llvm-svn: 250560
Summary: The syntax has changed a bit recently.
Reviewers: binji
Subscribers: llvm-commits, jfb, sunfish, dschuff
Differential Revision: http://reviews.llvm.org/D13821
llvm-svn: 250535
Summary: Make the relooper an analysis pass, to convert CFG to AST.
Reviewers: sunfish
Subscribers: jfb, dschuff
Differential Revision: http://reviews.llvm.org/D12744
llvm-svn: 250524
Summary:
Follow the same syntax as for the spec repo. Both have evolved slightly
independently and need to converge again.
This, along with wasmate changes, allows me to do the following:
echo "int add(int a, int b) { return a + b; }" > add.c
./out/bin/clang -O2 -S --target=wasm32-unknown-unknown add.c -o add.wack
./experimental/prototype-wasmate/wasmate.py add.wack > add.wast
./sexpr-wasm-prototype/out/sexpr-wasm add.wast -o add.wasm
./sexpr-wasm-prototype/third_party/v8-native-prototype/v8/v8/out/Release/d8 -e "print(WASM.instantiateModule(readbuffer('add.wasm'), {print:print}).add(42, 1337));"
As you'd expect, the d8 shell prints out the right value.
Reviewers: sunfish
Subscribers: jfb, llvm-commits, dschuff
Differential Revision: http://reviews.llvm.org/D13712
llvm-svn: 250480
Android libc provides a fixed TLS slot for the unsafe stack pointer,
and this change implements direct access to that slot on AArch64 via
__builtin_thread_pointer() + offset.
This change also moves more code into TargetLowering and its
target-specific subclasses to get rid of target-specific codegen
in SafeStackPass.
This change does not touch the ARM backend because ARM lowers
builting_thread_pointer as aeabi_read_tp, which is not available
on Android.
llvm-svn: 250456
D4796 taught LLVM to fold some atomic integer operations into a single
instruction. The pattern was unaware that the instructions clobbered
flags. I fixed some of this issue in D13680 but had missed INC/DEC.
This patch adds the missing EFLAGS definition.
llvm-svn: 250438
Summary:
x86 codegen is clever about generating good code for relaxed
floating-point operations, but it was being silly when globals and
immediates were involved, forgetting where the global was and
loading/storing from/to the wrong place. The same applied to hard-coded
address immediates.
Don't let it forget about the displacement.
This fixes https://llvm.org/bugs/show_bug.cgi?id=25171
A very similar bug when doing floating-points atomics to the stack is
also fixed by this patch.
This fixes https://llvm.org/bugs/show_bug.cgi?id=25144
Reviewers: pete
Subscribers: llvm-commits, majnemer, rsmith
Differential Revision: http://reviews.llvm.org/D13749
llvm-svn: 250429
Summary:
This macro is needed to prevent test/CodeGen/Mips/2008-08-01-AsmInline.ll from
failing after the integrated assembler is enabled by default.
Reviewers: vkalintiris
Subscribers: llvm-commits, dsanders
Differential Revision: http://reviews.llvm.org/D13654
llvm-svn: 250414
Summary:
The -mcpu=mips16 option caused the Integrated Assembler to crash because
it couldn't figure out the architecture revision number to write to the
.MIPS.abiflags section. This CPU definition has been removed because, like
microMIPS, MIPS16 is an ASE to a base architecture.
Reviewers: vkalintiris
Subscribers: rkotler, llvm-commits, dsanders
Differential Revision: http://reviews.llvm.org/D13656
llvm-svn: 250407
AVX-512 bit shuffle fails on 32 bit since we create a vector of 64-bit constants.
I split 8x64-bit const vector to 16x32 on 32-bit mode.
Differential Revision: http://reviews.llvm.org/D13644
llvm-svn: 250390
PR25157 identifies a bug where a load plus a vector shuffle is
incorrectly converted into an LXVDSX instruction. That optimization
is only valid if the load is of a doubleword, and in the noted case,
it was not. This corrects that problem.
Joint patch with Eric Schweitz, who provided the bugpoint-reduced test
case.
llvm-svn: 250324
This patch teaches x86 fast-isel how to select nontemporal stores.
On x86, we can use MOVNTI for nontemporal stores of doublewords/quadwords.
Instructions (V)MOVNTPS/PD/DQ can be used for SSE2/AVX aligned nontemporal
vector stores.
Before this patch, fast-isel always selected 'movd/movq' instead of 'movnti'
for doubleword/quadword nontemporal stores. In the case of nontemporal stores
of aligned vectors, fast-isel always selected movaps/movapd/movdqa instead of
movntps/movntpd/movntdq.
With this patch, if we use SSE2/AVX intrinsics for nontemporal stores we now
always get the expected (V)MOVNT instructions.
The lack of fast-isel support for nontemporal stores was spotted when analyzing
the -O0 codegen for nontemporal stores.
Differential Revision: http://reviews.llvm.org/D13698
llvm-svn: 250285
One of the changes in lib/Target/AMDGPU/AMDGPUMCInstLower.cpp was a new
one. Previously, bundle iterators and single-instruction iterators
could be compared to each other (comparing on underlying pointers).
I changed a comparison from using `MBB->end()` to using
`MBB->instr_end()`, since both end iterators should point at the some
place anyway.
I don't think the implicit conversion between the two iterator types is
a good idea since it's fairly easy to accidentally compare to the wrong
thing (they aren't always end iterators). Otherwise I would have just
added the conversion.
Even with that, no there should be functionality change here.
llvm-svn: 250218
Summary:
D4796 taught LLVM to fold some atomic integer operations into a single
instruction. The pattern was unaware that the instructions clobbered
flags.
This patch adds the missing EFLAGS definition.
Floating point operations don't set flags, the subsequent fadd
optimization is therefore correct. The same applies for surrounding
load/store optimizations.
Reviewers: rsmith, rtrieu
Subscribers: llvm-commits, reames, morisset
Differential Revision: http://reviews.llvm.org/D13680
llvm-svn: 250135
This basic combine was surprisingly missing.
AMDGPU legalizes many operations in terms of 32-bit vector components,
so not doing this results in many extra copies and subregister extracts
that need to be cleaned up later.
InstCombine already does this for the hasOneUse case. The target hook
is to fix a handful of tests which break (e.g. ARM/vmov.ll) which turn
from a vector materialize repeated immediate instruction to a constant
vector load with more scalar copies from it.
llvm-svn: 250129
We made them SP relative back in March (r233137) because that's the
value the runtime passes to EH functions. With the new cleanuppad IR,
funclets adjust their frame argument from SP to FP, so our offsets
should now be FP-relative.
llvm-svn: 250088
Function LowerVSETCC (in X86ISelLowering.cpp) worked under the wrong
assumption that for non-AVX512 targets, the source type and destination type
of a type-legalized setcc node were always the same type.
This assumption was unfortunately incorrect; the type legalizer is not always
able to promote the return type of a setcc to the same type as the first
operand of a setcc.
In the case of a vsetcc node, the legalizer firstly checks if the first input
operand has a legal type. If so, then it promotes the return type of the vsetcc
to that same type. Otherwise, the return type is promoted to the 'next legal
type', which, for vectors of MVT::i1 is always a 128-bit integer vector type.
Example (-mattr=+avx):
%0 = trunc <8 x i32> %a to <8 x i23>
%1 = icmp eq <8 x i23> %0, zeroinitializer
The initial selection dag for the code above is:
v8i1 = setcc t5, t7, seteq:ch
t5: v8i23 = truncate t2
t2: v8i32,ch = CopyFromReg t0, Register:v8i32 %vreg1
t7: v8i32 = build_vector of all zeroes.
The type legalizer would firstly check if 't5' has a legal type. If so, then it
would reuse that same type to promote the return type of the setcc node.
Unfortunately 't5' is of illegal type v8i23, and therefore it cannot be used to
promote the return type of the setcc node. Consequently, the setcc return type
is promoted to v8i16. Later on, 't5' is promoted to v8i32 thus leading to the
following dag node:
v8i16 = setcc t32, t25, seteq:ch
where t32 and t25 are now values of type v8i32.
Before this patch, function LowerVSETCC would have wrongly expanded the setcc
to a single X86ISD::PCMPEQ. Surprisingly, ISel was still able to match an
instruction. In our case, ISel would have matched a VPCMPEQWrr:
t37: v8i16 = X86ISD::VPCMPEQWrr t36, t25
However, t36 and t25 are both VR256, while the result type is instead of class
VR128. This inconsistency ended up causing the insertion of COPY instructions
like this:
%vreg7<def> = COPY %vreg3; VR128:%vreg7 VR256:%vreg3
Which is an invalid full copy (not a sub register copy).
Eventually, the backend would have hit an UNREACHABLE "Cannot emit physreg copy
instruction" in the attempt to expand the malformed pseudo COPY instructions.
This patch fixes the problem adding the missing logic in LowerVSETCC to handle
the corner case of a setcc with 128-bit return type and 256-bit operand type.
This problem was originally reported by Dimitry as PR25080. It has been latent
for a very long time. I have added the minimal reproducible from that bugzilla
as test setcc-lowering.ll.
Differential Revision: http://reviews.llvm.org/D13660
llvm-svn: 250085
Summary:
This removes unnecessary instructions when extracting from an undefined register
and also fixes a crash for O32 when passing undef to a double argument in
held in integer registers.
Reviewers: vkalintiris
Subscribers: llvm-commits, zoran.jovanovic, petarj
Differential Revision: http://reviews.llvm.org/D13467
llvm-svn: 250039
The Swift Machine Scheduler Model is incomplete. There are instructions
missing which can trigger the "incomplete machine model" abort. This was
observed when a downstream SchedMachineModel was added to the ARM
target.
Patch by Christof Douma!
llvm-svn: 250033
This patch fixes a problem in function 'combineX86ShuffleChain' that causes a
chain of shuffles to be wrongly folded away when the combined shuffle mask has
only one element.
We may end up with a combined shuffle mask of one element as a result of
multiple calls to function 'canWidenShuffleElements()'.
Function canWidenShuffleElements attempts to simplify a shuffle mask by widening
the size of the elements being shuffled.
For every pair of shuffle indices, function canWidenShuffleElements checks if
indices refer to adjacent elements. If all pairs refer to "adjacent" elements
then the shuffle mask is safely widened. As a consequence of widening, we end up
with a new shuffle mask which is half the size of the original shuffle mask.
The byte shuffle (pshufb) from test pr24562.ll has a mask of all SM_SentinelZero
indices. Function canWidenShuffleElements would combine each pair of
SM_SentinelZero indices into a single SM_SentinelZero index. So, in a
logarithmic number of steps (4 in this case), the pshufb mask is simplified to
a mask with only one index which is equal to SM_SentinelZero.
Before this patch, function combineX86ShuffleChain wrongly assumed that a mask
of size one is always equivalent to an identity mask. So, the entire shuffle
chain was just folded away as the combined shuffle mask was treated as a no-op
mask.
With this patch we know check if the only element of a combined shuffle mask is
SM_SentinelZero. In case, we propagate a zero vector.
Differential Revision: http://reviews.llvm.org/D13364
llvm-svn: 250027
The XOP vector integer comparisons can deal with all signed/unsigned comparison cases directly and can be easily commuted as well (D7646).
llvm-svn: 249976
expandPostRAPseudo():
STX -> 2 * STD: The first STD should not have the kill flag set for the address.
SystemZElimCompare:
BRC -> BRCT conversion: Don't forget to remove the CC<use,kill> operand.
Needed to make SystemZ/asm-17.ll pass with -verify-machineinstrs, which
now runs with this flag.
Reviewed by Ulrich Weigand.
llvm-svn: 249945
The new implementation works at least as well as the old implementation
did.
Also delete the associated preparation tests. They don't exercise
interesting corner cases of the new implementation. All the codegen
tests of the EH tables have already been ported.
llvm-svn: 249918
x64 catchpads use rax to inform the unwinder where control should go
next. However, we must initialize rax before the epilogue sequence so
as to not perturb the unwinder.
llvm-svn: 249910
This occurred due to introducing the invalid i64 type after type
legalization had already finished, in an attempt to workaround bitcast
f64 -> v2i32 not doing constant folding.
The *right* thing is to actually fix bitcast, but that has other
complications. So, for now, just get rid of the broken workaround, and
check in a test-case showing that it doesn't crash, with TODOs for
emitting proper code.
llvm-svn: 249908
When running combine on an extract_vector_elt, it wants to look through
a bitcast to check if the argument to the bitcast was itself an
extract_vector_elt with particular operands.
However, it called getOperand() on the argument to the bitcast *before*
checking that the opcode was EXTRACT_VECTOR_ELT, assert-failing if there
were zero operands for the actual opcode.
Fix, and add trivial test.
llvm-svn: 249891
After r249764, if you didn't see the full context, it looked like
`std::next(I)` would get the same result as
`++MachineBasicBlock::iterator(I)`. However, `I` is a `MachineInstr*`
(not a `MachineBasicBlock::iterator`).
Use the `getIterator()` helper I added later (r249782) to make this code
more clear.
llvm-svn: 249852
This patch corresponds to review:
http://reviews.llvm.org/D12032
This patch builds onto the patch that provided scalar to vector conversions
without stack operations (D11471).
Included in this patch:
- Vector element extraction for all vector types with constant element number
- Vector element extraction for v16i8 and v8i16 with variable element number
- Removal of some unnecessary COPY_TO_REGCLASS operations that ended up
unnecessarily moving things around between registers
Not included in this patch (will be in upcoming patch):
- Vector element extraction for v4i32, v4f32, v2i64 and v2f64 with
variable element number
- Vector element insertion for variable/constant element number
Testing is provided for all extractions. The extractions that are not
implemented yet are just placeholders.
llvm-svn: 249822
LLCH, LLHH and CLIH had the wrong register classes for the def-operand.
Tie operands if changing opcode to an instruction with tied ops.
Comment typo fix.
These fixes were needed in order to make regression test case
SystemZ/asm-18.ll pass with -verify-machineinstrs (not used by
default).
Reviewed by Ulrich Weigand.
llvm-svn: 249811
Let parseRegister() allow RegFP Group if expecting RegV Group, since the
%f register prefix yields the FP group even while used with vector instructions.
Reviewed by Ulrich Weigand.
llvm-svn: 249810
Accept r11 when targeting Windows on ARM rather than just low registers.
Because we are in a thumb-2 only mode, this may be slightly more expensive in
code size, but results in better code for the environment since it spills the
frame register, which is generally desired for fast stack walking as per the
ABI.
llvm-svn: 249804
Stop using `getNextNode()` to get an insertion point (at least, in this
one place). Instead, use iterator logic directly.
The `getNextNode()` interface isn't actually supposed to work for
creating iterators; it's supposed to return `nullptr` (not a real
iterator) if this is the last node. It's currently broken and will
"happen" to work, but if we ever fix the function, we'll get some
strange failures in places like this.
llvm-svn: 249764
Stop using `getNextNode()` to create an insertion point for machine
instructions (at least, in this one place). Instead, use an iterator.
As a drive-by, clean up dump statements to use iterator logic.
The `getNextNode()` interface isn't actually supposed to work for
insertion points; it's supposed to return `nullptr` if this is the last
node. It's currently broken and will "happen" to work, but if we ever
fix the function, we'll get some strange failures.
llvm-svn: 249758
its own variable.
This is needed so that we can explicitly turn off MMX without turning
off SSE and also so that we can diagnose feature set incompatibilities
that involve MMX without SSE.
Rationale:
// sse3
__m128d test_mm_addsub_pd(__m128d A, __m128d B) {
return _mm_addsub_pd(A, B);
}
// mmx
void shift(__m64 a, __m64 b, int c) {
_mm_slli_pi16(a, c);
_mm_slli_pi32(a, c);
_mm_slli_si64(a, c);
_mm_srli_pi16(a, c);
_mm_srli_pi32(a, c);
_mm_srli_si64(a, c);
_mm_srai_pi16(a, c);
_mm_srai_pi32(a, c);
}
clang -msse3 -mno-mmx file.c -c
For this code we should be able to explicitly turn off MMX
without affecting the compilation of the SSE3 function and then
diagnose and error on compiling the MMX function.
This matches the existing gcc behavior and follows the spirit of
the SSE/MMX separation in llvm where we can (and do) turn off
MMX code generation except in the presence of intrinsics.
Updated a couple of tests, but primarily tested with a couple of tests
for turning on only mmx and only sse.
This is paired with a patch to clang to take advantage of this behavior.
llvm-svn: 249731
o Before this patch, BPF backend will expand UNDEF node
to i64 constant 0.
o For second pass of dag combiner, legalizer will run through
each to-be-processed dag node.
o If any new SDNode is generated and has an undef operand,
dag combiner will put undef node, newly-generated constant-0 node,
and any node which uses these nodes in the working list.
o During this process, it is possible undef operand is
generated again, and this will form an infinite loop
for dag combiner pass2.
o This patch allows UNDEF to be a legal type.
Signed-off-by: Yonghong Song <yhs@plumgrid.com>
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
llvm-svn: 249718
