The previous patch (https://reviews.llvm.org/rL289538) got reverted because of a bug. Chandler also requested some changes to the algorithm.
http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20161212/413479.html
This is an updated patch. The key difference is that collectBitProviders (renamed to calculateByteProvider) now collects the origin of one byte, not the whole value. It simplifies the implementation and allows to stop the traversal earlier if we know that the result won't be used.
From the original commit:
Match a pattern where a wide type scalar value is loaded by several narrow loads and combined by shifts and ors. Fold it into a single load or a load and a bswap if the targets supports it.
Assuming little endian target:
i8 *a = ...
i32 val = a[0] | (a[1] << 8) | (a[2] << 16) | (a[3] << 24)
=>
i32 val = *((i32)a)
i8 *a = ...
i32 val = (a[0] << 24) | (a[1] << 16) | (a[2] << 8) | a[3]
=>
i32 val = BSWAP(*((i32)a))
This optimization was discussed on llvm-dev some time ago in "Load combine pass" thread. We came to the conclusion that we want to do this transformation late in the pipeline because in presence of atomic loads load widening is irreversible transformation and it might hinder other optimizations.
Eventually we'd like to support folding patterns like this where the offset has a variable and a constant part:
i32 val = a[i] | (a[i + 1] << 8) | (a[i + 2] << 16) | (a[i + 3] << 24)
Matching the pattern above is easier at SelectionDAG level since address reassociation has already happened and the fact that the loads are adjacent is clear. Understanding that these loads are adjacent at IR level would have involved looking through geps/zexts/adds while looking at the addresses.
The general scheme is to match OR expressions by recursively calculating the origin of individual bytes which constitute the resulting OR value. If all the OR bytes come from memory verify that they are adjacent and match with little or big endian encoding of a wider value. If so and the load of the wider type (and bswap if needed) is allowed by the target generate a load and a bswap if needed.
Reviewed By: RKSimon, filcab, chandlerc
Differential Revision: https://reviews.llvm.org/D27861
llvm-svn: 293036
If dominator tree has no roots, the pass that calculates it is
likely to be skipped. It occures, for instance, in the case of
entities with linkage available_externally. Do not run tree
verification in such case.
Differential Revision: https://reviews.llvm.org/D28767
llvm-svn: 293033
clang already emits this with -cl-no-signed-zeros, but codegen
doesn't do anything with it. Treat it like the other fast math
attributes, and change one place to use it.
llvm-svn: 293024
Looks like our cmake goop for handling .inc->td dependencies doesn't
track the .td files.
This manifests as cmake complaining about missing files since r293009.
Force a rerun to avoid that.
llvm-svn: 293012
There was a bug here where we were using p0 instead of s32 for the
selector type in the landingpad. Instead of hardcoding these types we
should get the types from the landingpad instruction directly.
Note that we replicate an assert from SDAG here to only support
two-valued landingpads.
llvm-svn: 292995
Summary:
When conditional branches with complex conditions are split into
multiple branches in SelectionDAGBuilder::FindMergedConditions, also
handle inverted conditions. These may sometimes appear without having
been optimized by InstCombine when CodeGenPrepare decides to sink and
duplicate cmp instructions, causing them to have only one use. This
problem can be increased by e.g. GVNHoist hiding more cmps from
InstCombine by combining equivalent cmps from different blocks.
For example codegen X & !(Y | Z) as:
jmp_if_X TmpBB
jmp FBB
TmpBB:
jmp_if_notY Tmp2BB
jmp FBB
Tmp2BB:
jmp_if_notZ TBB
jmp FBB
Reviewers: bogner, MatzeB, qcolombet
Subscribers: llvm-commits, hiraditya, mcrosier, sebpop
Differential Revision: https://reviews.llvm.org/D28380
llvm-svn: 292944
Summary:
This teaches getNode to simplify extracting from Undef. This is similar to what is done for EXTRACT_VECTOR_ELT. It also adds support for extracting from CONCAT_VECTOR when we can reuse one of the inputs to the concat. These seem like simple non-target specific optimizations.
For X86 we currently handle undef in extractSubvector, but not all EXTRACT_SUBVECTOR creations go through there.
Ultimately, my motivation here is to simplify extractSubvector and remove custom lowering for EXTRACT_SUBVECTOR since we don't do anything but handle undef and BUILD_VECTOR optimizations, but those should be DAG combines.
Reviewers: RKSimon, delena
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D29000
llvm-svn: 292876
A register unit may be allocatable and non-reserved but some of the
register(tuples) built with it are reserved. We still need to calculate
liveness in this case.
Note to out of tree targets: If you start seeing machine verifier errors
with this commit, it probably means that you do not properly mark super
registers of reserved register as reserved. See for example r292836 or
r292870 for example on how to fix that.
rdar://29996737
Differential Revision: https://reviews.llvm.org/D28881
llvm-svn: 292871
Summary:
The LibFunc::Func enum holds enumerators named for libc functions.
Unfortunately, there are real situations, including libc implementations, where
function names are actually macros (musl uses "#define fopen64 fopen", for
example; any other transitively visible macro would have similar effects).
Strictly speaking, a conforming C++ Standard Library should provide any such
macros as functions instead (via <cstdio>). However, there are some "library"
functions which are not part of the standard, and thus not subject to this
rule (fopen64, for example). So, in order to be both portable and consistent,
the enum should not use the bare function names.
The old enum naming used a namespace LibFunc and an enum Func, with bare
enumerators. This patch changes LibFunc to be an enum with enumerators prefixed
with "LibFFunc_". (Unfortunately, a scoped enum is not sufficient to override
macros.)
There are additional changes required in clang.
Reviewers: rsmith
Subscribers: mehdi_amini, mzolotukhin, nemanjai, llvm-commits
Differential Revision: https://reviews.llvm.org/D28476
llvm-svn: 292848
Since we're now avoiding operations using narrow scalar integer types,
we have to legalize the integer side of the FP conversions.
This requires teaching the legalizer how to do that.
llvm-svn: 292828
Re-Commit r292543 with a fix for the situation when the chain end is
MBB.end().
This function can be used to accumulate the set of all read and modified
register in a sequence of instructions.
Use this code in AArch64A57FPLoadBalancing::scavengeRegister() to prove
the concept.
- The AArch64A57LoadBalancing code is using a backwards analysis now
which is irrespective of kill flags. This is the main motivation for
this change.
Differential Revision: http://reviews.llvm.org/D22082
llvm-svn: 292705
Translating the constant can create more VRegs, which can invalidate the
reference into the DenseMap. So we have to look up the value again after all
that's happened.
llvm-svn: 292675
This patch fixes debug information for __thread variable on Mips
using .dtprelword and .dtpreldword directives.
Patch by Aleksandar Beserminji.
Differential Revision: http://reviews.llvm.org/D28770
llvm-svn: 292624
The recommit fixes a bug related with live interval update after the partial
redundent copy is moved.
The original patch is to solve the performance problem described in PR27827.
Register coalescing sometimes cannot remove a copy because of interference.
But if we can find a reverse copy in one of the predecessor block of the copy,
the copy is partially redundent and we may remove the copy partially by moving
it to the predecessor block without the reverse copy.
Differential Revision: https://reviews.llvm.org/D28585
llvm-svn: 292621
Inline spiller can decide to move a spill as early as possible in the basic block.
It will skip phis and label, but we also need to make sure it skips instructions
in the basic block prologue which restore exec mask.
Added isPositionLike callback in TargetInstrInfo to detect instructions which
shall be skipped in addition to common phis, labels etc.
Differential Revision: https://reviews.llvm.org/D27997
llvm-svn: 292554
It's easier to test the non-fallback path if we just drop these
intrinsics for now, like we did before we added the fallback path.
We'll obviously need to fix this properly, but the fixme for that is
already here.
llvm-svn: 292547
Rather than trying to find MF based on the possibly-null MI we've
passed in here, just pass it in directly. It's already available at
all callers anyway.
llvm-svn: 292544
This function can be used to accumulate the set of all read and modified
register in a sequence of instructions.
Use this code in AArch64A57FPLoadBalancing::scavengeRegister() to prove
the concept.
- The AArch64A57LoadBalancing code is using a backwards analysis now
which is irrespective of kill flags. This is the main motivation for
this change.
Differential Revision: http://reviews.llvm.org/D22082
llvm-svn: 292543
This is a set of register units intended to track register liveness, it
is similar in spirit to LivePhysRegs.
You can also think of this as the liveness tracking parts of the
RegisterScavenger factored out into an own class.
This was proposed in http://llvm.org/PR27609
Differential Revision: http://reviews.llvm.org/D21916
llvm-svn: 292542
This patch improves the knownbits logic for unsigned integer min/max opcodes.
For UMIN we know that the result will have the maximum of the inputs' known leading zero bits in the result, similarly for UMAX the maximum of the inputs' leading one bits.
This is particularly useful for simplifying clamping patterns,. e.g. as SSE doesn't have a uitofp instruction we want to use sitofp instead where possible and for that we need to confirm that the top bit is not set.
Differential Revision: https://reviews.llvm.org/D28853
llvm-svn: 292528
Summary:
The SDNodeOrder is saved in the IROrder field in the SDNode, and this
field may affects scheduling. Thus, letting dbg.value/declare increase
the order numbers may in turn affect scheduling.
Because of this change we also need to update the code deciding when
dbg values should be output, in ScheduleDAGSDNodes.cpp/ProcessSDDbgValues.
Dbg values now have the same order as the SDNode they are connected to,
not the following orders.
Test cases provided by Florian Hahn.
Reviewers: bogner, aprantl, sunfish, atrick
Reviewed By: atrick
Subscribers: fhahn, probinson, andreadb, llvm-commits, MatzeB
Differential Revision: https://reviews.llvm.org/D25318
llvm-svn: 292485
Summary:
Adds a RegisterBank tablegen class that can be used to declare the register
banks and an associated tablegen pass to generate the necessary code.
Changes since first commit attempt:
* Added missing guards
* Added more missing guards
* Found and fixed a use-after-free bug involving Twine locals
Reviewers: t.p.northover, ab, rovka, qcolombet
Reviewed By: qcolombet
Subscribers: aditya_nandakumar, rengolin, kristof.beyls, vkalintiris, mgorny, dberris, llvm-commits, rovka
Differential Revision: https://reviews.llvm.org/D27338
llvm-svn: 292478
- Fix doxygen comments: Do not repeat name, remove duplicated doxygen
comment (on declaration + implementation), etc.
- Use more range based for
llvm-svn: 292455
Non-prevailing weak/linkonce odr symbols will be dropped by ThinLTO to
available_externally when possible. If they had an initializer in the
global_ctors list, a comdat group was being created. This code
already had logic to skip available_externally defs, but now the
EliminateAvailableExternally pass will drop these symbols to
declarations earlier. Change the check to skip all declarations for
linker (which includes available_externally along with declarations).
Reviewers: mehdi_amini
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D28737
llvm-svn: 292408
Summary:
In this function, virtual registers can be introduced (for example
through calls to emitThumbRegPlusImmInReg). doScavengeFrameVirtualRegs
will replace those virtual registers with concrete registers later on
in PrologEpilogInserter, which sets NoVRegs again.
This patch fixes the Codegen/Thumb/segmented-stacks.ll test case which
failed with expensive checks.
https://llvm.org/bugs/show_bug.cgi?id=27484
Reviewers: rnk, bkramer, olista01
Reviewed By: olista01
Subscribers: llvm-commits, rengolin
Differential Revision: https://reviews.llvm.org/D28829
llvm-svn: 292372
Summary:
Adds a RegisterBank tablegen class that can be used to declare the register
banks and an associated tablegen pass to generate the necessary code.
Changes since last commit:
The new tablegen pass is now correctly guarded by LLVM_BUILD_GLOBAL_ISEL and
this should fix the buildbots however it may not be the whole fix. The previous
buildbot failures suggest there may be a memory bug lurking that I'm unable to
reproduce (including when using asan) or spot in the source. If they re-occur
on this commit then I'll need assistance from the bot owners to track it down.
Reviewers: t.p.northover, ab, rovka, qcolombet
Reviewed By: qcolombet
Subscribers: aditya_nandakumar, rengolin, kristof.beyls, vkalintiris, mgorny, dberris, llvm-commits, rovka
Differential Revision: https://reviews.llvm.org/D27338
llvm-svn: 292367
You can now define the register class of a virtual register on the
operand itself avoiding the need to use a "registers:" block.
Example: "%0:gr64 = COPY %rax"
Differential Revision: https://reviews.llvm.org/D22398
llvm-svn: 292321
The patch is to solve the performance problem described in PR27827.
Register coalescing sometimes cannot remove a copy because of interference.
But if we can find a reverse copy in one of the predecessor block of the copy,
the copy is partially redundent and we may remove the copy partially by moving
it to the predecessor block without the reverse copy.
Differential Revision: https://reviews.llvm.org/D28585
llvm-svn: 292292
Some platforms (notably iOS) use a different calling convention for unnamed vs
named parameters in varargs functions, so we need to keep track of this
information when translating calls.
Since not many platforms are involved, the guts of the special handling is in
the ValueHandler class (with a generic implementation that should work for most
targets).
llvm-svn: 292283
Correctly populating Machine PHIs relies on knowing exactly how the IR level
CFG was lowered to MachineIR. This needs to be tracked by any translation
phases that meddle (currently only SwitchInst handling).
This reapplies r291973 which was reverted because of testing failures. Fixes:
+ Don't return an ArrayRef to a local temporary.
+ Incorporate Kristof's suggested comment improvements.
llvm-svn: 292278
SelectionDAGBuilder recognizes libfuncs using some homegrown
parameter type-checking.
Use TLI instead, removing another heap of redundant code.
This isn't strictly NFC, as the SDAG code was too lax.
Concretely, this means changes are required to two tests:
- calling a non-variadic function via a variadic prototype isn't OK;
it just happens to work on x86_64 (but not on, e.g., aarch64).
- mempcpy has a size_t parameter; the SDAG code accepts any integer
type, which meant using i32 on x86_64 worked.
I don't think it's worth supporting either of these (IMO) broken
testcases. Instead, fix them to be more correct.
llvm-svn: 292189
Summary:
Adds a RegisterBank tablegen class that can be used to declare the register
banks and an associated tablegen pass to generate the necessary code.
Reviewers: t.p.northover, ab, rovka, qcolombet
Subscribers: aditya_nandakumar, rengolin, kristof.beyls, vkalintiris, mgorny, dberris, llvm-commits, rovka
Differential Revision: https://reviews.llvm.org/D27338
llvm-svn: 292132
This reverts commit r291973.
The test fails in a Release build with LLVM_BUILD_GLOBAL_ISEL enabled.
AFAICT, llc segfaults. I'll add a few more details to the original
commit.
llvm-svn: 292061
When GlobalISel is configured to abort rather than fallback the only
thing that resetting the machine function does is make things harder
to debug. If we ever get to this point in the abort configuration it
indicates that we've already hit a bug, so this changes the behaviour
to abort instead.
llvm-svn: 291977
Correctly populating Machine PHIs relies on knowing exactly how the IR level
CFG was lowered to MachineIR. This needs to be tracked by any translation
phases that meddle (currently only SwitchInst handling).
llvm-svn: 291973
reserved physreg in RegisterCoalescer.
Previously, we only checked for clobbers when merging into a READ of
the physreg, but not when merging from a WRITE to the physreg.
Differential Revision: https://reviews.llvm.org/D28527
llvm-svn: 291942
Rename from addOperand to just add, to match the other method that has been
added to MachineInstrBuilder for adding more than just 1 operand.
See https://reviews.llvm.org/D28057 for the whole discussion.
Differential Revision: https://reviews.llvm.org/D28556
llvm-svn: 291891
Running tests with expensive checks enabled exhibits some problems with
verification of pass results.
First, the pass verification may require results of analysis that are not
available. For instance, verification of loop info requires results of dominator
tree analysis. A pass may be marked as conserving loop info but does not need to
be dependent on DominatorTreePass. When a pass manager tries to verify that loop
info is valid, it needs dominator tree, but corresponding analysis may be
already destroyed as no user of it remained.
Another case is a pass that is skipped. For instance, entities with linkage
available_externally do not need code generation and such passes are skipped for
them. In this case result verification must also be skipped.
To solve these problems this change introduces a special flag to the Pass
structure to mark passes that have valid results. If this flag is reset,
verifications dependent on the pass result are skipped.
Differential Revision: https://reviews.llvm.org/D27190
llvm-svn: 291882
Summary:
The register bank is now entirely initialized in the constructor. However,
we still have the hardcoded number of register classes which will be
dealt with in the TableGen patch (D27338) since we do not have access
to this information to resolve this at this stage. The number of register
classes is known to the TRI and to TableGen but the RegisterBank
constructor is too early for the former and too late for the latter.
This will be fixed when the data is tablegen-erated.
Reviewers: t.p.northover, ab, rovka, qcolombet
Subscribers: aditya_nandakumar, kristof.beyls, vkalintiris, llvm-commits, dberris
Differential Revision: https://reviews.llvm.org/D27809
llvm-svn: 291770
Summary:
Refactor the RegisterBank initialization to use static data. This requires
GlobalISel implementations to rewrite calls to createRegisterBank() and
addRegBankCoverage() into a call to setRegBankData().
Out of tree targets can use diff 4 of D27807
(https://reviews.llvm.org/D27807?id=84117) to have addRegBankCoverage() dump
the register classes and other data that needs to be provided to
setRegBankData(). This is the method that was used to generate the static data
in this patch.
Tablegen-eration of this static data will follow after some refactoring.
Reviewers: t.p.northover, ab, rovka, qcolombet
Subscribers: aditya_nandakumar, kristof.beyls, vkalintiris, llvm-commits, dberris
Differential Revision: https://reviews.llvm.org/D27807
Differential Revision: https://reviews.llvm.org/D27808
llvm-svn: 291768
Previously the type dumper itself was passed around to a lot of different
places and manipulated in ways that were more appropriate on the type
database. For example, the entire TypeDumper was passed into the symbol
dumper, when all the symbol dumper wanted to do was lookup the name of a
TypeIndex so it could print it. That's what the TypeDatabase is for --
mapping type indices to names.
Another example is how if the user runs llvm-pdbdump with the option to
dump symbols but not types, we still have to visit all types so that we
can print minimal information about the type of a symbol, but just without
dumping full symbol records. The way we did this before is by hacking it
up so that we run everything through the type dumper with a null printer,
so that the output goes to /dev/null. But really, we don't need to dump
anything, all we want to do is build the type database. Since
TypeDatabaseVisitor now exists independently of TypeDumper, we can do
this. We just build a custom visitor callback pipeline that includes a
database visitor but not a dumper.
All the hackery around printers etc goes away. After this patch, we could
probably even delete the entire CVTypeDumper class since really all it is
at this point is a thin wrapper that hides the details of how to build a
useful visitation pipeline. It's not a priority though, so CVTypeDumper
remains for now.
After this patch we will be able to easily plug in a different style of
type dumper by only implementing the proper visitation methods to dump
one-line output and then sticking it on the pipeline.
Differential Revision: https://reviews.llvm.org/D28524
llvm-svn: 291724
This reverts commit ada6595a526d71df04988eb0a4b4fe84df398ded.
This needs a simple probability check because there are some cases where it is
not profitable.
llvm-svn: 291695
Even with aggressive fusion enabled, this requires duplicating
the fmul, or increases an fadd to another fma which is not an
improvement.
llvm-svn: 291642
We were starting to get some name clashes between llvm-pdbdump
and the common CodeView framework, so I took this opportunity
to rename a bunch of files to more accurately describe their
usage. This also helps in llvm-pdbdump to distinguish
between different files and whether they are used for pretty
dump mode or raw dump mode.
llvm-svn: 291627
This creates a centralized class in which to store type records.
It stores types as an array of entries, which matches the
notion of a type stream being a topologically sorted DAG.
Logic to build up such a database was already being used in
CVTypeDumper, so CVTypeDumper is now updated to to read from
a TypeDatabase which is filled out by an earlier visitor in
the pipeline.
Differential Revision: https://reviews.llvm.org/D28486
llvm-svn: 291626
When choosing the best successor for a block, ordinarily we would have preferred
a block that preserves the CFG unless there is a strong probability the other
direction. For small blocks that can be duplicated we now skip that requirement
as well.
Differential revision: https://reviews.llvm.org/D27742
llvm-svn: 291609
If a vector index is out of bounds, the result is supposed to be
undefined but is not undefined behavior. Change the legalization
for indexing the vector on the stack so that an out of bounds
index does not create an out of bounds memory access.
llvm-svn: 291604
Support for DW_FORM_implicit_const DWARFv5 feature.
When this form is used attribute value goes to .debug_abbrev section (as SLEB).
As this form would break any debug tool which doesn't support DWARFv5
it is guarded by dwarf version check. Attempt to use this form with
dwarf version <= 4 is considered a fatal error.
Differential Revision: https://reviews.llvm.org/D28456
llvm-svn: 291599
The usage of some MIPS MSA instrinsics that took immediates could crash LLVM
during lowering. This patch addresses that behaviour. Crucially this patch
also makes the use of intrinsics with out of range immediates as producing an
internal error.
The ld,st instrinsics would trigger an assertion failure for MIPS64 as their
lowering would attempt to add an i32 offset to a i64 pointer.
Reviewers: vkalintiris, slthakur
Differential Revision: https://reviews.llvm.org/D25438
llvm-svn: 291571
This method seems to have had a troubled life. This patch proposes that it
replaces the recently added helper function dumpSUIdentifier. This way, the
method can be used in other files using the SUnit class.
Differential revision: https://reviews.llvm.org/D28488
llvm-svn: 291520
While we can usually replace bitcast like instructions
(MachineInstr::isBitcast()) with a COPY this is not legal if any of the
users uses SUBREG_TO_REG to assert the upper bits of the result are
zero.
Differential Revision: https://reviews.llvm.org/D28474
llvm-svn: 291483
SUBREG_TO_REG takes a subregister index as 3rd operand, print the name
instead of a number. We already do the same for INSERT_SUBREG and
REG_SEQUENCE.
llvm-svn: 291481
Summary:
Originally
i64 = umax t8, Constant:i64<4>
was expanded into
i32,i32 = umax Constant:i32<0>, Constant:i32<0>
i32,i32 = umax t7, Constant:i32<4>
Now instead the two produced umax:es return i32 instead of i32, i32.
Thanks to Jan Vesely for help with the test case.
Patch by mikael.holmen at ericsson.com
Reviewers: bogner, jvesely, tstellarAMD, arsenm
Subscribers: test, wdng, RKSimon, arsenm, nhaehnle, llvm-commits
Differential Revision: https://reviews.llvm.org/D28135
llvm-svn: 291441
Summary:
I've noticed that these assertions don't trigger when the condition is false.
The problem is that the DEBUG(x) macro only executes x when the pass is
emitting debug output via the -debug and -debug-only=registerbankinfo command
line arguments.
Debug builds should always execute the assertions so use '#ifndef NDEBUG' instead.
Also removed an assertion that is only true the first time it's tested. <Target>RegisterBankInfo's constructor will re-use register banks causing them to be valid on subsequent tests. That
assertion will fail on the first test too in the near future.
Reviewers: t.p.northover, ab, rovka, qcolombet
Subscribers: dberris, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D28358
llvm-svn: 291235
We used the logBase2 of the high instead of the ceilLogBase2 resulting
in the wrong result for certain values. For example, it resulted in an
i1 AssertZExt when the exclusive portion of the range was 3.
llvm-svn: 291196
Add an assert that checks whether liveins are up to date before they are
used.
- Do not print liveins into .mir files anymore in situations where they
are out of date anyway.
- The assert in the RegisterScavenger is superseded by the new one in
livein_begin().
- Skip parts of the liveness updating logic in IfConversion.cpp when
liveness isn't tracked anymore (just enough to avoid hitting the new
assert()).
Differential Revision: https://reviews.llvm.org/D27562
llvm-svn: 291169
To make this work, pointers from the MachineBasicBlock to the LLVM-IR-level
basic blocks need to be initialized, as the AsmPrinter uses this link to be
able to print out labels for the basic blocks that are address-taken.
Most of the changes in this commit are about adapting existing tests to include
the basic block name that is now printed out in the MIR format, now that the
name becomes available as the link to the LLVM-IR basic block is initialized.
The relevant test change for the functionality added in this patch are the
added "(address-taken)" strings in
test/CodeGen/AArch64/GlobalISel/arm64-irtranslator.ll.
Differential Revision: https://reviews.llvm.org/D28123
llvm-svn: 291105
This commit does this using a trivial chain of conditional branches. In the
future, we probably want to reuse the optimized switch lowering used in
SelectionDAG.
Differential Revision: https://reviews.llvm.org/D28176
llvm-svn: 291099
Summary:
When promoting fp-to-uint16 to fp-to-sint32, the result is actually zero
extended. For example, given double 65534.0, without legalization:
fp-to-uint16: 65534.0 -> 0xfffe
With the legalization:
fp-to-sint32: 65534.0 -> 0x0000fffe
Without this patch, legalization wrongly emits a signed extend assertion,
which is consumed by later icmp instruction, and cause miscompile.
Note that the floating point value must be in [0, 65535), otherwise the
behavior is undefined.
This patch reverts r279223 behavior and adds more tests and
documentations.
In PR29041's context, James Molloy mentioned that:
We don't need to mask because conversion from float->uint8_t is
undefined if the integer part of the float value is not representable in
uint8_t. Therefore we can assume this doesn't happen!
which is totally true and good, because fptoui is documented clearly to
have undefined behavior when overflow/underflow happens. We should take
the advantage of this behavior so that we can save unnecessary mask
instructions.
Reviewers: jmolloy, nadav, echristo, kbarton
Subscribers: mehdi_amini, nemanjai, llvm-commits
Differential Revision: https://reviews.llvm.org/D28284
llvm-svn: 291015
Summary:
Instead of matching:
(a + i) + 1 -> (a + i, undef, 1)
Now it matches:
(a + i) + 1 -> (a, i, 1)
Reviewers: rengolin
Differential Revision: http://reviews.llvm.org/D26367
From: Evgeny Stupachenko <evstupac@gmail.com>
llvm-svn: 291012
Summary:
The InlineSpiller was accessing the DominatorTreeBase directly
through the public data member DT in the MachineDominatorTree.
This is not a good idea as the "cached" information in
SplitCriticalEdges is not applied before the access.
The DominatorTreeBase must be accessed through the member
function getBase() in MachineDominatorTree.
The fault was introduced in r266162.
I think the public data member DT in the MachineDominatorTree
should have been made private in the original code (r215576)
that introduced the concept of lazily updating the
MachineDominatorTree information from
MachineBasicBlock::SplitCriticalEdge().
Patch by Karl-Johan Karlsson <karl-johan.karlsson@ericsson.com>
Reviewers: wmi, qcolombet
Subscribers: llvm-commits, bjope, uabelho
Differential Revision: https://reviews.llvm.org/D27983
llvm-svn: 290950
Use getReturnedArgOperand() instead of rolling our own. Note that it's
equivalent because there can only be one 'returned' operand.
The existing code was also incorrect: there already was awkward logic to
ignore callee/EH blocks, but operands can now also be operand bundles,
in which case we'll look for non-existent parameter attributes.
Unfortunately, this isn't observable in-tree, as it only crashes when
exercising the regular call lowering logic with operand bundles.
Still, this is a nice small cleanup anyway.
llvm-svn: 290905
Summary:
No need to have this per-architecture. While there, unify 32-bit ARM's
behaviour with what changed elsewhere and start function names lowercase
as per the coding standards. Individual entry emission code goes to the
entry's own class.
Fully tested on amd64, cross-builds on both ARMs and PowerPC.
Reviewers: dberris
Subscribers: aemerson, llvm-commits
Differential Revision: https://reviews.llvm.org/D28209
llvm-svn: 290858
GNU as rejects input where .cfi_sections is used after .cfi_startproc,
if the new section differs from the old. Adjust our output to always
emit .cfi_sections before the first .cfi_startproc to minimize necessary
code.
Differential Revision: https://reviews.llvm.org/D28011
llvm-svn: 290817
Summary:
`PromotedFloats` needs to be checked in
`DAGTypeLegalizer::PerformExpensiveChecks`. This patch fixes a few type
legalization failures with expansive checks for ARM fp16 tests.
Reviewers: baldrick, bogner, arsenm
Subscribers: arsenm, aemerson, llvm-commits
Differential Revision: https://reviews.llvm.org/D28187
llvm-svn: 290796
This reverts commit r290694. It broke sanitizer tests on Win64. I'll
probably bring this back, but the jump tables will just live in .text
like they do for MSVC.
llvm-svn: 290714
This change adds a new intrinsic which is intended to provide memcpy functionality
with additional atomicity guarantees. Please refer to the review thread
or language reference for further details.
Differential Revision: https://reviews.llvm.org/D27133
llvm-svn: 290708
Summary:
We were already using 32-bit jump table entries, but this was a
consequence of the default PIC model on Win64, and not an intentional
design decision. This patch ensures that we always use 32-bit label
difference jump table entries on Win64 regardless of the PIC model. This
is a good idea because it saves executable size and object file size.
Moving the jump tables to .rdata cleans up the disassembled object code
and reduces the available ROP targets, but it requires adding one more
RIP-relative lea to the code. COFF doesn't have relocations to express
the difference between two arbitrary symbols, so we can't use the jump
table label in the label difference like we do elsewhere.
Fixes PR31488
Reviewers: majnemer, compnerd
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D28141
llvm-svn: 290694
Jump table emission can switch to .rdata before
WinException::endFunction gets called. Just remember the appropriate
text section we started in and reset back to it when we end the
function. We were already switching sections back from .xdata anyway.
Fixes the first problem in PR31488, so that now COFF switch tables can
live in .rdata if we want them to.
llvm-svn: 290678
1.Fix pessimized case in FIXME.
2.Add tests for it.
3.The canonicalisation on shifts results in different sequence for
tests of machine-licm.Correct some check lines.
Differential Revision: https://reviews.llvm.org/D27916
llvm-svn: 290410
Summary:
This change rewrites a core component in the ImplicitNullChecks pass for
greater simplicity since the original design was over-complicated for no
good reason. Please review this as essentially a new pass. The change
is almost NFC and I've added a test case for a scenario that this new
code handles that wasn't handled earlier.
The implicit null check pass, at its core, is a code hoisting transform.
It differs from "normal" code transforms in that it speculates
potentially faulting instructions (by design), but a lot of the usual
hazard detection logic (register read-after-write etc.) still applies.
We previously detected hazards by keeping track of registers defined and
used by machine instructions over an instruction range, but that was
unwieldy and did not actually confer any performance benefits. The
intent was to have linear time complexity over the number of machine
instructions considered, but it ended up being N^2 is practice.
This new version is more obviously O(N^2) (with N capped to 8 by
default) in hazard detection. It does not attempt to be clever in
tracking register uses or defs (the previous cleverness here was a
source of bugs).
Once this is checked in, I'll extract out the `IsSuitableMemoryOp` and
`CanHoistLoadInst` lambda into member functions (they're too complicated
to be inline lambdas) and do some other related NFC cleanups.
Reviewers: reames, anna, atrick
Subscribers: mcrosier, llvm-commits
Differential Revision: https://reviews.llvm.org/D27592
llvm-svn: 290394
We used to not check generic vregs, but that is actually a mistake given
nothing in the GlobalISel pipeline is going to fix the constraints on
target specific instructions. Therefore, the target has to have them
right from the start.
llvm-svn: 290380
When generic virtual registers get constrained, because of a use on a
target specific operation for instance, we end up with regular virtual
registers with a type and that's perfectly fine.
llvm-svn: 290376
This is going to be needed to be able to constraint register class on
target specific instruction while the RegBankSelect pass did not run
yet.
llvm-svn: 290375
Move the logic to constraint register from InstructionSelector to a
utility function. It will be required by other passes in the GlobalISel
pipeline.
llvm-svn: 290374
This is a succeeding patch of https://reviews.llvm.org/D22840 to address the
issue when a value to be merged into an int64 pair is in a different BB. Redoing
the store splitting in CodeGenPrepare so we can match the pattern across multiple
BBs and move some instructions into the same BB. We still keep the code in dag
combine so that we can catch cases that show up after DAG combining runs.
Differential Revision: https://reviews.llvm.org/D25914
llvm-svn: 290365
This is for splitMergedValStore in DAG Combine to share the target query interface
with similar logic in CodeGenPrepare.
Differential Revision: https://reviews.llvm.org/D24707
llvm-svn: 290363
When the pipeliner is renaming phi values, it may need to iterate through
the phi operands to check for other phis. However, the pipeliner should
stop once it reaches a phi that is outside the pipelined loop.
Also, when the generateExistingPhis code is unable to reuse an existing
phi, the default code that computes the PhiOp2 is only to be used when
the pipeliner is generating the kernel. Otherwise, the phi may be a value
computed earlier in the same epilog.
Patch by Brendon Cahoon.
llvm-svn: 290355
When DwarfExpression is emitting a fragment that is located in a
register and that fragment is smaller than the register, and the
register must be composed from sub-registers (are you still with me?)
the last DW_OP_piece operation must not be larger than the size of the
fragment itself, since the last piece of the fragment could be smaller
than the last subregister that is being emitted.
rdar://problem/29779065
llvm-svn: 290324
There are helpers for testing for constant or constant build_vector,
and for splat ConstantFP vectors, but not for a constantfp or
non-splat ConstantFP vector.
llvm-svn: 290317
The vectorcall calling convention specifies that arguments to functions are to be passed in registers, when possible.
vectorcall uses more registers for arguments than fastcall or the default x64 calling convention use.
The vectorcall calling convention is only supported in native code on x86 and x64 processors that include Streaming SIMD Extensions 2 (SSE2) and above.
The current implementation does not handle Homogeneous Vector Aggregates (HVAs) correctly and this review attempts to fix it.
This aubmit also includes additional lit tests to cover better HVAs corner cases.
Differential Revision: https://reviews.llvm.org/D27392
llvm-svn: 290240
we used to print UNKNOWN instructions when the instruction to be printer was not
yet inserted in any BB: in that case the pretty printer would not be able to
compute a TII as the instruction does not belong to any BB or function yet.
This patch explicitly passes the TII to the pretty-printer.
Differential Revision: https://reviews.llvm.org/D27645
llvm-svn: 290228
We're currently doing nearly the same thing for @llvm.objectsize in
three different places: two of them are missing checks for overflow,
and one of them could subtly break if InstCombine gets much smarter
about removing alloc sites. Seems like a good idea to not do that.
llvm-svn: 290214
This patch implements PR31013 by introducing a
DIGlobalVariableExpression that holds a pair of DIGlobalVariable and
DIExpression.
Currently, DIGlobalVariables holds a DIExpression. This is not the
best way to model this:
(1) The DIGlobalVariable should describe the source level variable,
not how to get to its location.
(2) It makes it unsafe/hard to update the expressions when we call
replaceExpression on the DIGLobalVariable.
(3) It makes it impossible to represent a global variable that is in
more than one location (e.g., a variable with multiple
DW_OP_LLVM_fragment-s). We also moved away from attaching the
DIExpression to DILocalVariable for the same reasons.
This reapplies r289902 with additional testcase upgrades and a change
to the Bitcode record for DIGlobalVariable, that makes upgrading the
old format unambiguous also for variables without DIExpressions.
<rdar://problem/29250149>
https://llvm.org/bugs/show_bug.cgi?id=31013
Differential Revision: https://reviews.llvm.org/D26769
llvm-svn: 290153
Summary:
MachineInstr::isIdenticalTo() is for some reason not
symmetric when comparing bundles, which gives us the
property:
I1->isIdenticalTo(*I2) != I2->isIdenticalTo(*I1)
when comparing bundles where one bundle is longer than
the other.
This patch makes sure that bundles of different length
always are considered as not being identical. Thus, the
result of the comparison will be the same regardless of
which side that happens to be to the left.
Reviewers: dexonsmith, jonpa, andrew.w.kaylor
Subscribers: llvm-commits, mehdi_amini
Differential Revision: https://reviews.llvm.org/D27508
llvm-svn: 290095
The original version of the code in XRayInstrumentation.cpp assumed that
functions may not have empty machine basic blocks (or that the first one
couldn't be). This change addresses that by special-casing that specific
situation.
We provide two .mir test-cases to make sure we're handling this
appropriately.
Fixes llvm.org/PR31424.
Reviewers: chandlerc
Subscribers: varno, llvm-commits
Differential Revision: https://reviews.llvm.org/D27913
llvm-svn: 290091
Summary:
PseudoSourceValue can be used to attach a target specific value for "well behaved" side-effects lowered from target specific intrinsics.
This is useful whenever there is not an LLVM IR Value around when representing such "well behaved" side-effected operations in backends by attaching a MachineMemOperand with a custom PseudoSourceValue as this makes the scheduler not treating them as "GlobalMemoryObjects" which triggers a logic that makes the operation act like a barrier in the Schedule DAG.
This patch adds another Kind to the PseudoSourceValue object which is "TargetCustom". It indicates a type of PseudoSourceValue that has a target specific meaning (aka. LLVM shouldn't assume any specific usage for such a PSV).
It supports the possibility of having many different kinds of "TargetCustom" PseudoSourceValues.
We had a discussion about if this was valuable or not (in particular because there was a believe that PSV were going away sooner or later) but seems like they are not going anywhere and I think they are useful backend side.
It is not clear the interaction of this with MIRParser (do we need a target hook to parse these?) and I would like a comment from Alex about that :)
Reviewers: arphaman, hfinkel, arsenm
Subscribers: Eugene.Zelenko, llvm-commits
Patch By: Marcello Maggioni
Differential Revision: https://reviews.llvm.org/D13575
llvm-svn: 290037
This is recommit of r287553 after fixing the invalid loop info after eliminating an empty block and unit test failures in AVR and WebAssembly :
Summary: Merging an empty case block into the header block of switch could cause ISel to add COPY instructions in the header of switch, instead of the case block, if the case block is used as an incoming block of a PHI. This could potentially increase dynamic instructions, especially when the switch is in a loop. I added a test case which was reduced from the benchmark I was targetting.
Reviewers: t.p.northover, mcrosier, manmanren, wmi, joerg, davidxl
Subscribers: joerg, qcolombet, danielcdh, hfinkel, mcrosier, llvm-commits
Differential Revision: https://reviews.llvm.org/D22696
llvm-svn: 289988
This reverts commit 289920 (again).
I forgot to implement a Bitcode upgrade for the case where a DIGlobalVariable
has not DIExpression. Unfortunately it is not possible to safely upgrade
these variables without adding a flag to the bitcode record indicating which
version they are.
My plan of record is to roll the planned follow-up patch that adds a
unit: field to DIGlobalVariable into this patch before recomitting.
This way we only need one Bitcode upgrade for both changes (with a
version flag in the bitcode record to safely distinguish the record
formats).
Sorry for the churn!
llvm-svn: 289982
This is the 3rd of 3 patches to get reading and writing of
CodeView symbol and type records to use a single codepath.
Differential Revision: https://reviews.llvm.org/D26427
llvm-svn: 289978
`dropUnknownNonDebugMetadata` takes a list of "known" metadata IDs. The
only reason it worked at all is that `getMetadataID` returns something
unrelated -- it returns the subclass ID of the receiver (which is used
in `dyn_cast` etc.). That does not numerically match
`LLVMContext::MD_invariant_group` and ends up dropping `invariant_group`
along with every other metadata that does not numerically match
`LLVMContext::MD_invariant_group`.
llvm-svn: 289973
This is recommit of r287553 after fixing the invalid loop info after eliminating an empty block:
Summary: Merging an empty case block into the header block of switch could cause ISel to add COPY instructions in the header of switch, instead of the case block, if the case block is used as an incoming block of a PHI. This could potentially increase dynamic instructions, especially when the switch is in a loop. I added a test case which was reduced from the benchmark I was targetting.
Reviewers: t.p.northover, mcrosier, manmanren, wmi, joerg, davidxl
Subscribers: joerg, qcolombet, danielcdh, hfinkel, mcrosier, llvm-commits
Differential Revision: https://reviews.llvm.org/D22696
llvm-svn: 289951
Add the minimal support necessary to select a function that returns the sum of
two i32 values.
This includes some support for argument/return lowering of i32 values through
registers, as well as the handling of copy and add instructions throughout the
GlobalISel pipeline.
Differential Revision: https://reviews.llvm.org/D26677
llvm-svn: 289940
Summary:
This commits moves skipDebugInstructionsForward and
skipDebugInstructionsBackward from lib/CodeGen/IfConversion.cpp
to include/llvm/CodeGen/MachineBasicBlock.h and updates
some codgen files to use them.
This refactoring was suggested in https://reviews.llvm.org/D27688
and I thought it's best to do the refactoring in a separate
review, but I could also put both changes in a single review
if that's preferred.
Also, the names for the functions aren't the snappiest and
I would be happy to rename them if anybody has suggestions.
Reviewers: eli.friedman, iteratee, aprantl, MatzeB
Subscribers: MatzeB, llvm-commits
Differential Revision: https://reviews.llvm.org/D27782
llvm-svn: 289933
This patch implements PR31013 by introducing a
DIGlobalVariableExpression that holds a pair of DIGlobalVariable and
DIExpression.
Currently, DIGlobalVariables holds a DIExpression. This is not the
best way to model this:
(1) The DIGlobalVariable should describe the source level variable,
not how to get to its location.
(2) It makes it unsafe/hard to update the expressions when we call
replaceExpression on the DIGLobalVariable.
(3) It makes it impossible to represent a global variable that is in
more than one location (e.g., a variable with multiple
DW_OP_LLVM_fragment-s). We also moved away from attaching the
DIExpression to DILocalVariable for the same reasons.
This reapplies r289902 with additional testcase upgrades.
<rdar://problem/29250149>
https://llvm.org/bugs/show_bug.cgi?id=31013
Differential Revision: https://reviews.llvm.org/D26769
llvm-svn: 289920
idiom.
r289538: Match load by bytes idiom and fold it into a single load
r289540: Fix a buildbot failure introduced by r289538
r289545: Use more detailed assertion messages in the code ...
r289646: Add a couple of assertions to the load combine code ...
This DAG combine has a bad crash in it that is quite hard to trigger
sadly -- it relies on sneaking code with UB through the SDAG build and
into this particular combine. I've responded to the original commit with
a test case that reproduces it.
However, the code also has other problems that will require substantial
changes to address and so I'm going ahead and reverting it for now. This
should unblock us and perhaps others that are hitting the crash in the
wild and will let a fresh patch with updated approach come in cleanly
afterward.
Sorry for any trouble or disruption!
llvm-svn: 289916
This patch implements PR31013 by introducing a
DIGlobalVariableExpression that holds a pair of DIGlobalVariable and
DIExpression.
Currently, DIGlobalVariables holds a DIExpression. This is not the
best way to model this:
(1) The DIGlobalVariable should describe the source level variable,
not how to get to its location.
(2) It makes it unsafe/hard to update the expressions when we call
replaceExpression on the DIGLobalVariable.
(3) It makes it impossible to represent a global variable that is in
more than one location (e.g., a variable with multiple
DW_OP_LLVM_fragment-s). We also moved away from attaching the
DIExpression to DILocalVariable for the same reasons.
<rdar://problem/29250149>
https://llvm.org/bugs/show_bug.cgi?id=31013
Differential Revision: https://reviews.llvm.org/D26769
llvm-svn: 289902
The IRTranslator uses an additional block before the LLVM-IR entry block
to perform all the ABI lowering and the constant hoisting. Thus, this
block is the actual entry block and it falls through the LLVM-IR entry
block. However, with such representation, we end up with two basic
blocks that are not maximal.
Therefore, this patch adds a bit of canonicalization by merging both the
LLVM-IR entry block and the ABI lowering/constants hoisting into one
block, making the resulting block more likely to be maximal (indeed the
LLVM-IR entry block might not have been maximal).
llvm-svn: 289891
The assert could potentially fire (though no cases have been
encountered), so just check that the instruction we're handling
specially for rematerialization only has one def to begin with.
Reviewed by Wei Mi over email.
llvm-svn: 289861
Specifically avoid implicit conversions from/to integral types to
avoid potential errors when changing the underlying type. For example,
a typical initialization of a "full" mask was "LaneMask = ~0u", which
would result in a value of 0x00000000FFFFFFFF if the type was extended
to uint64_t.
Differential Revision: https://reviews.llvm.org/D27454
llvm-svn: 289820
This implements execute-only support for ARM code generation, which
prevents the compiler from generating data accesses to code sections.
The following changes are involved:
* Add the CodeGen option "-arm-execute-only" to the ARM code generator.
* Add the clang flag "-mexecute-only" as well as the GCC-compatible
alias "-mpure-code" to enable this option.
* When enabled, literal pools are replaced with MOVW/MOVT instructions,
with VMOV used in addition for floating-point literals. As the MOVT
instruction is required, execute-only support is only available in
Thumb mode for targets supporting ARMv8-M baseline or Thumb2.
* Jump tables are placed in data sections when in execute-only mode.
* The execute-only text section is assigned section ID 0, and is
marked as unreadable with the SHF_ARM_PURECODE flag with symbol 'y'.
This also overrides selection of ELF sections for globals.
llvm-svn: 289784
Summary:
This fixes an issue with MachineBlockPlacement due to a badly timed call
to `analyzeBranch` with `AllowModify` set to true. The timeline is as
follows:
1. `MachineBlockPlacement::maybeTailDuplicateBlock` calls
`TailDup.shouldTailDuplicate` on its argument, which in turn calls
`analyzeBranch` with `AllowModify` set to true.
2. This `analyzeBranch` call edits the terminator sequence of the block
based on the physical layout of the machine function, turning an
unanalyzable non-fallthrough block to a unanalyzable fallthrough
block. Normally MBP bails out of rearranging such blocks, but this
block was unanalyzable non-fallthrough (and thus rearrangeable) the
first time MBP looked at it, and so it goes ahead and decides where
it should be placed in the function.
3. When placing this block MBP fails to analyze and thus update the
block in keeping with the new physical layout.
Concretely, before (1) we have something like:
```
LBL0:
< unknown terminator op that may branch to LBL1 >
jmp LBL1
LBL1:
... A
LBL2:
... B
```
In (2), analyze branch simplifies this to
```
LBL0:
< unknown terminator op that may branch to LBL2 >
;; jmp LBL1 <- redundant jump removed
LBL1:
... A
LBL2:
... B
```
In (3), MachineBlockPlacement goes ahead with its plan of putting LBL2
after the first block since that is profitable.
```
LBL0:
< unknown terminator op that may branch to LBL2 >
;; jmp LBL1 <- redundant jump
LBL2:
... B
LBL1:
... A
```
and the program now has incorrect behavior (we no longer fall-through
from `LBL0` to `LBL1`) because MBP can no longer edit LBL0.
There are several possible solutions, but I went with removing the teeth
off of the `analyzeBranch` calls in TailDuplicator. That makes thinking
about the result of these calls easier, and breaks nothing in the lit
test suite.
I've also added some bookkeeping to the MachineBlockPlacement pass and
used that to write an assert that would have caught this.
Reviewers: chandlerc, gberry, MatzeB, iteratee
Subscribers: mcrosier, llvm-commits
Differential Revision: https://reviews.llvm.org/D27783
llvm-svn: 289764
The original motivation for this patch comes from wanting to canonicalize
more IR to selects and also canonicalizing min/max.
If we're going to do that, we need more backend fixups to undo select codegen
when simpler ops will do. I chose AArch64 for the tests because that shows the
difference in the simplest way. This should fix:
https://llvm.org/bugs/show_bug.cgi?id=31175
Differential Revision: https://reviews.llvm.org/D27489
llvm-svn: 289738
Retrying after fixing after removing load-store factoring through
token factors in favor of improved token factor operand pruning
Simplify Consecutive Merge Store Candidate Search
Now that address aliasing is much less conservative, push through
simplified store merging search which only checks for parallel stores
through the chain subgraph. This is cleaner as the separation of
non-interfering loads/stores from the store-merging logic.
Whem merging stores, search up the chain through a single load, and
finds all possible stores by looking down from through a load and a
TokenFactor to all stores visited. This improves the quality of the
output SelectionDAG and generally the output CodeGen (with some
exceptions).
Additional Minor Changes:
1. Finishes removing unused AliasLoad code
2. Unifies the the chain aggregation in the merged stores across
code paths
3. Re-add the Store node to the worklist after calling
SimplifyDemandedBits.
4. Increase GatherAllAliasesMaxDepth from 6 to 18. That number is
arbitrary, but seemed sufficient to not cause regressions in
tests.
This finishes the change Matt Arsenault started in r246307 and
jyknight's original patch.
Many tests required some changes as memory operations are now
reorderable. Some tests relying on the order were changed to use
volatile memory operations
Noteworthy tests:
CodeGen/AArch64/argument-blocks.ll -
It's not entirely clear what the test_varargs_stackalign test is
supposed to be asserting, but the new code looks right.
CodeGen/AArch64/arm64-memset-inline.lli -
CodeGen/AArch64/arm64-stur.ll -
CodeGen/ARM/memset-inline.ll -
The backend now generates *worse* code due to store merging
succeeding, as we do do a 16-byte constant-zero store efficiently.
CodeGen/AArch64/merge-store.ll -
Improved, but there still seems to be an extraneous vector insert
from an element to itself?
CodeGen/PowerPC/ppc64-align-long-double.ll -
Worse code emitted in this case, due to the improved store->load
forwarding.
CodeGen/X86/dag-merge-fast-accesses.ll -
CodeGen/X86/MergeConsecutiveStores.ll -
CodeGen/X86/stores-merging.ll -
CodeGen/Mips/load-store-left-right.ll -
Restored correct merging of non-aligned stores
CodeGen/AMDGPU/promote-alloca-stored-pointer-value.ll -
Improved. Correctly merges buffer_store_dword calls
CodeGen/AMDGPU/si-triv-disjoint-mem-access.ll -
Improved. Sidesteps loading a stored value and
merges two stores
CodeGen/X86/pr18023.ll -
This test has been removed, as it was asserting incorrect
behavior. Non-volatile stores *CAN* be moved past volatile loads,
and now are.
CodeGen/X86/vector-idiv.ll -
CodeGen/X86/vector-lzcnt-128.ll -
It's basically impossible to tell what these tests are actually
testing. But, looks like the code got better due to the memory
operations being recognized as non-aliasing.
CodeGen/X86/win32-eh.ll -
Both loads of the securitycookie are now merged.
Reviewers: arsenm, hfinkel, tstellarAMD, jyknight, nhaehnle
Subscribers: wdng, nhaehnle, nemanjai, arsenm, weimingz, niravd, RKSimon, aemerson, qcolombet, dsanders, resistor, tstellarAMD, t.p.northover, spatel
Differential Revision: https://reviews.llvm.org/D14834
llvm-svn: 289659
Generalize sdiv/udiv/srem/urem combines using APInt::isPowerOf2, which only works for const/splat-const values, to call SelectionDAG::isKnownToBeAPowerOfTwo instead which recognises many more cases.
Added a DAGCombiner::BuildLogBase2 helper since PowerOf2 combines often involve taking the log2 of such a value.
Differential Revision: https://reviews.llvm.org/D27714
llvm-svn: 289654
At least the plugin used by the LibreOffice build
(<https://wiki.documentfoundation.org/Development/Clang_plugins>) indirectly
uses those members (through inline functions in LLVM/Clang include files in turn
using them), but they are not exported by utils/extract_symbols.py on Windows,
and accessing data across DLL/EXE boundaries on Windows is generally
problematic.
Differential Revision: https://reviews.llvm.org/D26671
llvm-svn: 289647
Follow-up to r289256, address a FIXME to avoid resetting the column
number. This reduced .debug_line by 2.6% in a RelWithDebInfo
self-build of clang.
llvm-svn: 289620
Summary:
This patch aims to generalize matching of the strided store accesses to more general masks.
The more general rule is to have consecutive accesses based on the stride:
[x, y, ... z, x+1, y+1, ...z+1, x+2, y+2, ...z+2, ...]
All elements in the masks need not form a contiguous space, there may be gaps.
As before, undefs are allowed and filled in with adjacent element loads.
Reviewers: HaoLiu, mssimpso
Subscribers: mkuper, delena, llvm-commits
Differential Revision: https://reviews.llvm.org/D23646
llvm-svn: 289573
Match a pattern where a wide type scalar value is loaded by several narrow loads and combined by shifts and ors. Fold it into a single load or a load and a bswap if the targets supports it.
Assuming little endian target:
i8 *a = ...
i32 val = a[0] | (a[1] << 8) | (a[2] << 16) | (a[3] << 24)
=>
i32 val = *((i32)a)
i8 *a = ...
i32 val = (a[0] << 24) | (a[1] << 16) | (a[2] << 8) | a[3]
=>
i32 val = BSWAP(*((i32)a))
This optimization was discussed on llvm-dev some time ago in "Load combine pass" thread. We came to the conclusion that we want to do this transformation late in the pipeline because in presence of atomic loads load widening is irreversible transformation and it might hinder other optimizations.
Eventually we'd like to support folding patterns like this where the offset has a variable and a constant part:
i32 val = a[i] | (a[i + 1] << 8) | (a[i + 2] << 16) | (a[i + 3] << 24)
Matching the pattern above is easier at SelectionDAG level since address reassociation has already happened and the fact that the loads are adjacent is clear. Understanding that these loads are adjacent at IR level would have involved looking through geps/zexts/adds while looking at the addresses.
The general scheme is to match OR expressions by recursively calculating the origin of individual bits which constitute the resulting OR value. If all the OR bits come from memory verify that they are adjacent and match with little or big endian encoding of a wider value. If so and the load of the wider type (and bswap if needed) is allowed by the target generate a load and a bswap if needed.
Reviewed By: hfinkel, RKSimon, filcab
Differential Revision: https://reviews.llvm.org/D26149
llvm-svn: 289538
The general idea here is to get enough of the existing restrictions out of the way that the already existing folding logic in foldMemoryOperand can kick in for STATEPOINTs and fold references to immutable stack slots. The key changes are:
Support for folding multiple operands at once which reference the same load
Support for folding multiple loads into a single instruction
Walk all the operands of the instruction for varidic instructions (this is a bug fix!)
Once this lands, I'll post another patch which refactors the TII interface here. There's nothing actually x86 specific about the x86 code used here.
Differential Revision: https://reviews.llvm.org/D24103
llvm-svn: 289510
The stack slot reuse code had a really amusing bug. We ended up only reusing a stack slot exact once (initial use + reuse) within a basic block. If we had a third statepoint to process, we ended up allocating a new set of stack slots. If we crossed a basic block boundary, the set got cleared. As a result, code which is invoke heavy doesn't see the problem, but multiple calls within a basic block does. Net result: as we optimize invokes into calls, lowering gets worse.
The root error here is that the bitmap uses by the custom allocator wasn't kept in sync. The result was that we ended up resizing the bitmap on the next statepoint (to handle the cross block case), reset the bit once, but then never reset it again.
Differential Revision: https://reviews.llvm.org/D25243
llvm-svn: 289509
DWARF specifies that "line 0" really means "no appropriate source
location" in the line table. By default, use this for branch targets
and some other cases that have no specified source location, to
prevent inheriting unfortunate line numbers from physically preceding
instructions (which might be from completely unrelated source).
Updated patch allows enabling or suppressing this behavior for all
unspecified source locations.
Differential Revision: http://reviews.llvm.org/D24180
llvm-svn: 289468
We have found that -- when the selected subarchitecture has a scheduling model
and we are not optimizing for size -- the machine-instruction combiner uses a
too-simple algorithm to compute the cost of one of the two alternatives [before
and after running a combining pass on a section of code], and therefor it throws
away the combination results too often.
This fix has the potential to help any ISA with the potential to combine
instructions and for which at least one subarchitecture has a scheduling model.
As of now, this is only known to definitely affect AArch64 subarchitectures with
a scheduling model.
Regression tested on AMD64/GNU-Linux, new test case tested to fail on an
unpatched compiler and pass on a patched compiler.
Patch by Abe Skolnik and Sebastian Pop.
llvm-svn: 289399
LLVM's use of DW_OP_bit_piece is incorrect and a based on a
misunderstanding of the wording in the DWARF specification. The offset
argument of DW_OP_bit_piece refers to the offset into the location
that is on the top of the DWARF expression stack, and not an offset
into the source variable. This has since also been clarified in the
DWARF specification.
This patch fixes all uses of DW_OP_bit_piece to emit the correct
offset and simplifies the DwarfExpression class to semi-automaticaly
emit empty DW_OP_pieces to adjust the offset of the source variable,
thus simplifying the code using DwarfExpression.
While this is an incompatible bugfix, in practice I don't expect this
to be much of a problem since LLVM's old interpretation and the
correct interpretation of DW_OP_bit_piece differ only when there are
gaps in the fragmented locations of the described variables or if
individual fragments are smaller than a byte. LLDB at least won't
interpret locations with gaps in them because is has no way to present
undefined bits in a variable, and there is a high probability that an
old-form expression will be malformed when interpreted correctly,
because the DW_OP_bit_piece offset will be outside of the location at
the top of the stack.
As a nice side-effect, this patch enables us to use a more efficient
encoding for subregisters: In order to express a sub-register at a
non-zero offset we now use a DW_OP_bit_piece instead of shifting the
value into place manually.
This patch also adds missing test coverage for code paths that weren't
exercised before.
<rdar://problem/29335809>
Differential Revision: https://reviews.llvm.org/D27550
llvm-svn: 289266
Like DBG_VALUE, these emit nothing to the .text section, and sometimes
have no source location specified. Just ignore them.
Differential Revision: http://reviews.llvm.org/D27492
llvm-svn: 289256
Reapplied with fix for PR31323 - X86 SSE2 vXi16 multiplies for illegal types were creating CONCAT_VECTORS nodes with vector inputs that might not total the number of elements in the result type.
llvm-svn: 289232
Retrying after fixing overly aggressive load-store forwarding optimization.
Simplify Consecutive Merge Store Candidate Search
Now that address aliasing is much less conservative, push through
simplified store merging search which only checks for parallel stores
through the chain subgraph. This is cleaner as the separation of
non-interfering loads/stores from the store-merging logic.
Whem merging stores, search up the chain through a single load, and
finds all possible stores by looking down from through a load and a
TokenFactor to all stores visited. This improves the quality of the
output SelectionDAG and generally the output CodeGen (with some
exceptions).
Additional Minor Changes:
1. Finishes removing unused AliasLoad code
2. Unifies the the chain aggregation in the merged stores across
code paths
3. Re-add the Store node to the worklist after calling
SimplifyDemandedBits.
4. Increase GatherAllAliasesMaxDepth from 6 to 18. That number is
arbitrary, but seemed sufficient to not cause regressions in
tests.
This finishes the change Matt Arsenault started in r246307 and
jyknight's original patch.
Many tests required some changes as memory operations are now
reorderable. Some tests relying on the order were changed to use
volatile memory operations
Noteworthy tests:
CodeGen/AArch64/argument-blocks.ll -
It's not entirely clear what the test_varargs_stackalign test is
supposed to be asserting, but the new code looks right.
CodeGen/AArch64/arm64-memset-inline.lli -
CodeGen/AArch64/arm64-stur.ll -
CodeGen/ARM/memset-inline.ll -
The backend now generates *worse* code due to store merging
succeeding, as we do do a 16-byte constant-zero store efficiently.
CodeGen/AArch64/merge-store.ll -
Improved, but there still seems to be an extraneous vector insert
from an element to itself?
CodeGen/PowerPC/ppc64-align-long-double.ll -
Worse code emitted in this case, due to the improved store->load
forwarding.
CodeGen/X86/dag-merge-fast-accesses.ll -
CodeGen/X86/MergeConsecutiveStores.ll -
CodeGen/X86/stores-merging.ll -
CodeGen/Mips/load-store-left-right.ll -
Restored correct merging of non-aligned stores
CodeGen/AMDGPU/promote-alloca-stored-pointer-value.ll -
Improved. Correctly merges buffer_store_dword calls
CodeGen/AMDGPU/si-triv-disjoint-mem-access.ll -
Improved. Sidesteps loading a stored value and
merges two stores
CodeGen/X86/pr18023.ll -
This test has been removed, as it was asserting incorrect
behavior. Non-volatile stores *CAN* be moved past volatile loads,
and now are.
CodeGen/X86/vector-idiv.ll -
CodeGen/X86/vector-lzcnt-128.ll -
It's basically impossible to tell what these tests are actually
testing. But, looks like the code got better due to the memory
operations being recognized as non-aliasing.
CodeGen/X86/win32-eh.ll -
Both loads of the securitycookie are now merged.
Reviewers: arsenm, hfinkel, tstellarAMD, jyknight, nhaehnle
Subscribers: wdng, nhaehnle, nemanjai, arsenm, weimingz, niravd, RKSimon, aemerson, qcolombet, dsanders, resistor, tstellarAMD, t.p.northover, spatel
Differential Revision: https://reviews.llvm.org/D14834
llvm-svn: 289221
Part of the work for PR31323 - add extra asserts checking that the input vectors are of consistent type and result in the correct number of vector elements.
llvm-svn: 289214
Adds support for bitcasting a little endian 'small element' vector to 'large element' scalar/vector (e.g. v16i8 to v4i32 or v2i32 to i64), which is required for PR30845. We extract the knownbits for each 'small element' part and concatenate the results together.
We can add support for big endian and 'large element' scalar/vector to 'small element' vector bitcasting once we have test cases for them.
Differential Revision: https://reviews.llvm.org/D27129
llvm-svn: 289200
This reverts commit r288916 as it is currently causing a crasher in
Halide. Reproducer on llvm.org/PR31323. While it might be that halide is
generating invalid IR, llc shouldn't crash.
llvm-svn: 289194
Supporting them properly is a reasonably complex chunk of work, so to allow bot
testing before then we should at least be able to fall back to DAG ISel.
llvm-svn: 289150
We were falsely claiming that we had an LSDA for the relevant EH
personality before this change, which could lead to the EH machinery
interpreting random adjacent data as an LSDA.
Fixes PR31317
This change is safe because cleanups can't contain exception handlers
today. We do these things to maintain that invariant:
- C++ destructors are naturally out-of-line
- __finally blocks are outlined in clang
- LLVM's inliner will not inline EH constructs into cleanups
llvm-svn: 289101
Summary:
Most targets set the action for these nodes to Expand even though there
isn't actually any code for them in ExpandNode. Instead, targets simply
relied on the fact that no code generates these nodes as long as the
nodes aren't legal or custom.
However, generating these nodes can be useful e.g. for divide-by-constant
in wider integer types.
Expand of [US]MUL_LOHI will use MULH[US] when legal or custom, and
a sequence of half-width multiplications otherwise. Promote uses a wider
multiply.
This patch intends to not change the generated code, but indirect effects
are possible since expansions/promotions that were previously done in
DAGCombine may now be done in LegalizeDAG.
See D24822 for a change that actually uses the new expansion.
Reviewers: spatel, bkramer, venkatra, efriedma, hfinkel, ast, nadav, tstellarAMD
Subscribers: arsenm, jyknight, nemanjai, wdng, nhaehnle, llvm-commits
Differential Revision: https://reviews.llvm.org/D24956
llvm-svn: 289050
So far it creates a test helper and so it should be moved there. It also
create a layering cycle between CodeGen and CodeGen/AsmPrinter, which
should be avoided.
Review: https://reviews.llvm.org/D27570
llvm-svn: 289044
The relocations for `DIEEntry::EmitValue` were wrong for Win64
(emitting FK_Data_4 instead of FK_SecRel_4). This corrects that
oversight so that the DWARF data is correct in Win64 COFF files.
Fixes PR15393.
Patch by Jameson Nash <jameson@juliacomputing.com> based on a patch
by David Majnemer.
Differential Revision: https://reviews.llvm.org/D21731
llvm-svn: 289013
The only tests we have for the DWARF parser are the tests that use llvm-dwarfdump and expect output from textual dumps.
More DWARF parser modification are coming in the next few weeks and I wanted to add tests that can verify that we can encode and decode all form types, as well as test some other basic DWARF APIs where we ask DIE objects for their children and siblings.
DwarfGenerator.cpp was added in the lib/CodeGen directory. This file contains the code necessary to easily create DWARF for tests:
dwarfgen::Generator DG;
Triple Triple("x86_64--");
bool success = DG.init(Triple, Version);
if (!success)
return;
dwarfgen::CompileUnit &CU = DG.addCompileUnit();
dwarfgen::DIE CUDie = CU.getUnitDIE();
CUDie.addAttribute(DW_AT_name, DW_FORM_strp, "/tmp/main.c");
CUDie.addAttribute(DW_AT_language, DW_FORM_data2, DW_LANG_C);
dwarfgen::DIE SubprogramDie = CUDie.addChild(DW_TAG_subprogram);
SubprogramDie.addAttribute(DW_AT_name, DW_FORM_strp, "main");
SubprogramDie.addAttribute(DW_AT_low_pc, DW_FORM_addr, 0x1000U);
SubprogramDie.addAttribute(DW_AT_high_pc, DW_FORM_addr, 0x2000U);
dwarfgen::DIE IntDie = CUDie.addChild(DW_TAG_base_type);
IntDie.addAttribute(DW_AT_name, DW_FORM_strp, "int");
IntDie.addAttribute(DW_AT_encoding, DW_FORM_data1, DW_ATE_signed);
IntDie.addAttribute(DW_AT_byte_size, DW_FORM_data1, 4);
dwarfgen::DIE ArgcDie = SubprogramDie.addChild(DW_TAG_formal_parameter);
ArgcDie.addAttribute(DW_AT_name, DW_FORM_strp, "argc");
// ArgcDie.addAttribute(DW_AT_type, DW_FORM_ref4, IntDie);
ArgcDie.addAttribute(DW_AT_type, DW_FORM_ref_addr, IntDie);
StringRef FileBytes = DG.generate();
MemoryBufferRef FileBuffer(FileBytes, "dwarf");
auto Obj = object::ObjectFile::createObjectFile(FileBuffer);
EXPECT_TRUE((bool)Obj);
DWARFContextInMemory DwarfContext(*Obj.get());
This code is backed by the AsmPrinter code that emits DWARF for the actual compiler.
While adding unit tests it was discovered that DIEValue that used DIEEntry as their values had bugs where DW_FORM_ref1, DW_FORM_ref2, DW_FORM_ref8, and DW_FORM_ref_udata forms were not supported. These are all now supported. Added support for DW_FORM_string so we can emit inlined C strings.
Centralized the code to unique abbreviations into a new DIEAbbrevSet class and made both the dwarfgen::Generator and the llvm::DwarfFile classes use the new class.
Fixed comments in the llvm::DIE class so that the Offset is known to be the compile/type unit offset.
DIEInteger now supports more DW_FORM values.
There are also unit tests that cover:
Encoding and decoding all form types and values
Encoding and decoding all reference types (DW_FORM_ref1, DW_FORM_ref2, DW_FORM_ref4, DW_FORM_ref8, DW_FORM_ref_udata, DW_FORM_ref_addr) including cross compile unit references with that go forward one compile unit and backward on compile unit.
Differential Revision: https://reviews.llvm.org/D27326
llvm-svn: 289010
ConstantExpr instances were emitting code into the current block rather than
the entry block. This meant they didn't necessarily dominate all uses, which is
clearly wrong.
llvm-svn: 288985
Having to ask the MIRBuilder for the current function is a little awkward, and
I'm intending to improve how that's threaded through anyway.
llvm-svn: 288983
MachineIRBuilder had weird before/after and beginning/end flags for the insert
point. Unfortunately the non-default means that instructions will be inserted
in reverse order which is almost never what anyone wants.
Really, I think we just want (like IRBuilder has) the ability to insert at any
C++ iterator-style point (i.e. before any instruction or before MBB.end()). So
this fixes MIRBuilders to behave like IRBuilders in this respect.
llvm-svn: 288980
On some platforms (like MSP430) the second element of the result
structure for SMULO/UMULO may have a shorter type than the one
returned by SetCC. We need to truncate it to the right type, or
else some incorrect code may be generated later on.
This fixes issue https://github.com/rust-lang/rust/issues/37829
Patch by Vadzim Dambrouski!
Differential Revision: https://reviews.llvm.org/D27154
llvm-svn: 288857
We were rounding size in bits down rather than up, leading to 0-sized slots for
i1 (assert!) and bugs for other types not byte-aligned.
llvm-svn: 288848
Handle the case where a sign extension has ended up being split into separate stages (typically to get around vector legal ops) and a zext + sext_in_reg gets inserted.
Differential Revision: https://reviews.llvm.org/D27461
llvm-svn: 288842
There were two problems:
+ AArch64 was reusing random data from its binary op tables, which is
complete nonsense for G_SEQUENCE.
+ Even when AArch64 gave up and said it couldn't handle G_SEQUENCE,
the generic code asserted.
llvm-svn: 288836
It'll almost immediately fail because it always tries to half/double the size
until it finds a legal one. Unfortunately, this triggers an assertion
preventing the DAG fallback from being possible.
llvm-svn: 288834
The function used to finish off PHIs by adding the relevant basic blocks can
fail if we're aborting and still don't actually have the needed
MachineBasicBlocks. So avoid trying in that case.
llvm-svn: 288727
When the entry block was empty after arg lowering, we were always placing
constants at the end. This is probably hamrless while translating the same
block, but horribly wrong once its terminator has been translated. So switch to
inserting at the beginning.
llvm-svn: 288720
This makes it more similar to the floating-point constant, and also allows for
larger constants to be translated later. There's no real functional change in
this patch though, just syntax updates.
llvm-svn: 288712
Returning 0 (NoReg) from getOrCreateVReg leads to unexpected situations later
in the translation. It's better to return a valid (if undefined) register and
let the rest of the instruction carry on as planned.
llvm-svn: 288709
so we can stop using DW_OP_bit_piece with the wrong semantics.
The entire back story can be found here:
http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20161114/405934.html
The gist is that in LLVM we've been misinterpreting DW_OP_bit_piece's
offset field to mean the offset into the source variable rather than
the offset into the location at the top the DWARF expression stack. In
order to be able to fix this in a subsequent patch, this patch
introduces a dedicated DW_OP_LLVM_fragment operation with the
semantics that we used to apply to DW_OP_bit_piece, which is what we
actually need while inside of LLVM. This patch is complete with a
bitcode upgrade for expressions using the old format. It does not yet
fix the DWARF backend to use DW_OP_bit_piece correctly.
Implementation note: We discussed several options for implementing
this, including reserving a dedicated field in DIExpression for the
fragment size and offset, but using an custom operator at the end of
the expression works just fine and is more efficient because we then
only pay for it when we need it.
Differential Revision: https://reviews.llvm.org/D27361
rdar://problem/29335809
llvm-svn: 288683
We treat bitwise 'not' as a special operation and try not to reduce its all-ones mask.
Presumably, this is because a 'not' may be cheaper than a generic 'xor' or it may get
folded into another logic op if the target has those. However, if we can remove a logic
instruction by changing the xor's constant mask value, that should always be a win.
Note that the IR version of SimplifyDemandedBits() does not treat 'not' as a special-case
currently (although that's marked with a FIXME). So if you run this IR through -instcombine,
you should get the same end result. I'm hoping to add a different backend transform that
will expose this problem though, so I need to solve this first.
Differential Revision: https://reviews.llvm.org/D27356
llvm-svn: 288676
This function seems target-independent so far: all the target-specific behaviour
is isolated in the CCAssignFn and the ValueHandler (which we're also extracting
into the generic CallLowering).
The intention is to use this in the ARM backend.
Differential Revision: https://reviews.llvm.org/D27045
llvm-svn: 288658
Summary:
When X = 0 and Y = inf, the original code produces inf, but the transformed
code produces nan. So this transform (and its relatives) should only be
used when the no-infs-fp-math flag is explicitly enabled.
Also disable the transform using fmad (intermediate rounding) when unsafe-math
is not enabled, since it can reduce the precision of the result; consider this
example with binary floating point numbers with two bits of mantissa:
x = 1.01
y = 111
x * (y + 1) = 1.01 * 1000 = 1010 (this is the exact result; no rounding occurs at any step)
x * y + x = 1000.11 + 1.01 =r 1000 + 1.01 = 1001.01 =r 1000 (with rounding towards zero)
The example relies on rounding towards zero at least in the second step.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98578
Reviewers: RKSimon, tstellarAMD, spatel, arsenm
Subscribers: wdng, llvm-commits
Differential Revision: https://reviews.llvm.org/D26602
llvm-svn: 288506
Instead, expose whether the current type is an array or a struct, if an array
what the upper bound is, and if a struct the struct type itself. This is
in preparation for a later change which will make PointerType derive from
Type rather than SequentialType.
Differential Revision: https://reviews.llvm.org/D26594
llvm-svn: 288458