The movw instruction is only available in ARM state for V6T2 and above.
The MOVi16 instruction has requirement HasV6T2 but the InstAlias
for mov rd, imm where the operand is imm0_65535_expr:$imm does not.
This means that movw can incorrectly be used in ARMv4 and ARMv5 by
writing mov rd, 0x1234. The simple fix is to the requirement HasV6T2
to the InstAlias. Tests added to not-armv4.s.
Patch by Peter Smith.
llvm-svn: 269761
Summary: On Linux, /usr/include/bits/byteswap-16.h defines __byteswap_16(x) as an inlined LRVH (Load Reversed Half-word) instruction. The SystemZ back-end did not support this opcode and the inlined assembly would cause a fatal error.
Reviewers: bryanpkc, uweigand
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D18732
llvm-svn: 269688
Summary:
The failure r269410 worked around turned out to be caused by an incorrect
evaluation of R_MICROMIPS_GOT16 which then caused the GOT entries to be
incorrect.
This patch fixes the evaluation and reverts r269410.
Reviewers: sdardis, vkalintiris, rafael
Subscribers: rafael, dsanders, sdardis, llvm-commits
Differential Revision: http://reviews.llvm.org/D20242
llvm-svn: 269641
Summary:
This fixes PR27682. Additionally, '.set micromips' by itself is not sufficient
to raise the EF_MIPS_MICROMIPS flag. It is also necessary to emit a microMIPS
instruction. This has also been fixed.
Reviewers: sdardis, vkalintiris, rafael
Subscribers: rafael, dsanders, sdardis, llvm-commits
Differential Revision: http://reviews.llvm.org/D20214
llvm-svn: 269639
Author: obucina
Reviewers: dsanders
Adds support for third operand for [D]DIV[U] instructions. Additional test for case when destination reg is zero register
Differential Revision: http://reviews.llvm.org/D16888
llvm-svn: 269636
Most immediates are printed in Aarch64InstPrinter using 'formatImm' macro,
but not all of them.
Implementation contains following rules:
- floating point immediates are always printed as decimal
- signed integer immediates are printed depends on flag settings
(for negative values 'formatImm' macro prints the value as i.e -0x01
which may be convenient when imm is an address or offset)
- logical immediates are always printed as hex
- the 64-bit immediate for advSIMD, encoded in "a🅱️c:d:e:f:g:h" is always printed as hex
- the 64-bit immedaite in exception generation instructions like:
brk, dcps1, dcps2, dcps3, hlt, hvc, smc, svc is always printed as hex
- the rest of immediates is printed depends on availability
of -print-imm-hex
Signed-off-by: Maciej Gabka <maciej.gabka@arm.com>
Signed-off-by: Paul Osmialowski <pawel.osmialowski@arm.com>
Differential Revision: http://reviews.llvm.org/D16929
llvm-svn: 269446
It's not entirely clear why R_MICROMIPS_(GOT|HI16|LO16) are evaluated
incorrectly in a small number of the LNT tests at this point. However, it's not
related to the STO_MIPS_MICROMIPS issue.
At this point all the microMIPS-related changes of r268900 have been reverted.
llvm-svn: 269410
This change implements the transformation in processInstruction() for the
LDR rt, =expression to MOV rt, expression when the expression can be evaluated
and can fit into the immediate field of the MOV or a MVN.
Across the ARM and Thumb instruction sets there are several cases to consider,
each with a different range of representatble constants.
In ARM we have:
* Modified immediate (All ARM architectures)
* MOVW (v6t2 and above)
In Thumb we have:
* Modified immediate (v6t2, v7m and v8m.mainline)
* MOVW (v6t2, v7m, v8.mainline and v8m.baseline)
* Narrow Thumb MOV that can be used in an IT block (non flag-setting)
If the immediate fits any of the available alternatives then we make the transformation.
Fixes 25722.
Patch by Peter Smith.
llvm-svn: 269354
Alter instances in the test-suite that use immediates that can be represented
in the immediate field of a MOV. The reason for doing this is that when the
LDR rt,=imm transformation to MOV rt, imm the existing tests do not need to
be modified.
Required by the patch that fixes PR25722.
Patch by Peter Smith.
llvm-svn: 269353
Summary:
This expands on r269179 to fix an additional case that was not covered by our
tests. The assembler temporary is not needed when the .cprestore offset fits
inside a simm16 and it is not an error to use it inside a '.set noat' in this
case.
Reviewers: emaste, seanbruno, sdardis
Subscribers: dsanders, sdardis, llvm-commits
Differential Revision: http://reviews.llvm.org/D20199
llvm-svn: 269295
As explained in r269196, microMIPS has a special case that is not correctly
implemented in LLVM. If we have a symbol 'foo' which is equivalent to
'.text+0x10'. The value of an R_MICROMIPS_LO16 relocation using 'foo' is
'foo+0x11' and not 'foo+0x10'. The in-place addend should therefore be 0x11.
This commit reverts a little more of the effect of r268900 by keeping the
symbol when the STO_MIPS_MICROMIPS flag is set for R_MIPS_GPREL32 relocations.
This fixes SingleSource/UnitTests/2003-08-11-VaListArg, and
SingleSource/UnitTests/2003-05-07-VarArgs for microMIPS.
I believe there are additional relocations that have the same issue (e.g.
R_MIPS_64, and R_MIPS_GPREL16) but for now I'm focusing on restoring our
internal buildbots back to the green state we had in r268899.
llvm-svn: 269294
Summary:
This eliminates the default case for N64 that was left out of r269047.
The change to R_MIPS_SUB is needed in this patch to make this testable since
%lo(%neg(%gp_rel(foo))) and %hi(%neg(%gp_rel(foo))) remain the only ways to get
a compound relocation from the assembler.
Reviewers: sdardis, rafael
Subscribers: dsanders, llvm-commits, sdardis
Differential Revision: http://reviews.llvm.org/D20097
llvm-svn: 269280
microMIPS has a special case that is not correctly implemented in LLVM. If we
have a symbol 'foo' which is equivalent to '.text+0x10'. The value of an
R_MICROMIPS_LO16 relocation using 'foo' is 'foo+0x11' and not 'foo+0x10'. The
in-place addend should therefore be 0x11.
Work around this by partially reverting the effect of r268900 by keeping the
symbol when the STO_MIPS_MICROMIPS flag is set. This fixes
SingleSource/Regression/C/PR640 for microMIPS.
llvm-svn: 269196
Summary:
r268058 unintentionally made the retrieval of the current assembler temporary
unconditional. This was fine for the existing tests but it broke the cases
where the assembler temporary is not needed (N32/N64 or not PIC) and is
unavailable due to a '.set noat' directive.
This fixes FreeBSD's libc.
Reviewers: emaste, sdardis, seanbruno
Subscribers: dsanders, emaste, sdardis, llvm-commits
Differential Revision: http://reviews.llvm.org/D20093
llvm-svn: 269179
Added support for extended mnemonics for the following branch instructions and
load/store-on-condition opcodes:
BR, LOCR, LOCGR, LOC, LOCG, STOC, STOCG
Phabricator: http://reviews.llvm.org/D19729
Committing on behalf of Zhan Liau
llvm-svn: 269106
Following post-commit comments on r268900 from Rafael Espindola:
The missing relocations are now explicitly listed in the switch statement with
appropriate FIXME comments and the default path is now unreachable. The
temporary exception to this is that compound relocations for N64 still have a
default path that returns true. This is because fixing that case ought to be a
separate patch.
Also make R_MIPS_NONE return false since it has no effect on the section data.
llvm-svn: 269047
This change adds SMAC (signed multiply-accumulate) and UMAC (unsigned multiply-accumulate) for LEON subtargets of the Sparc processor.
The new files LeonFeatures.td and leon-instructions.ll will both be expanded in future, so I want to leave them separate as small files for this review, to be expanded in future check-ins.
Note: The functions are provided only for inline-assembly provision. No DAG selection is provided.
Differential Revision: http://reviews.llvm.org/D19911
llvm-svn: 268908
Summary:
In theory, care must be taken to ensure that pairs of R_MIPS_(GOT|HI|LO)16
make the same decision on both relocs in the reloc pair but in practice
this isn't as hard as it sounds and only limits the complexity of the
predicate used. We handle all three with the same code to ensure their
decisions always agree with each other.
Reviewers: sdardis
Subscribers: rafael, dsanders, sdardis, llvm-commits
Differential Revision: http://reviews.llvm.org/D19016
llvm-svn: 268900
Added support for sendmsg(MSG[, OP[, STREAM_ID]]) syntax
in s_sendmsg and s_sendmsghalt instructions.
The syntax matches the SP3 assembler/disassembler rules.
That is why implicit inputs (like M0 and EXEC) are not printed
to disassembly output anymore.
sendmsg(...) allows only known message types and attributes,
even if literals are used instead of symbolic names.
However, raw literal (without "sendmsg") still can be used,
and that allows for any 16-bit value.
Tests updated/added.
Differential Revision: http://reviews.llvm.org/D19596
llvm-svn: 268762
Summary:
Direct object emission has an initialization order problem where an
InitMCObjectFile is called after MipsTargetELFStreamer determines whether
PIC is enabled by default or not. There doesn't seem to be point that
initializes all cases so split the responsibility between
MipsTargetELFStreamer and MipsAsmPrinter.
Reviewers: sdardis
Subscribers: dsanders, llvm-commits, sdardis
Differential Revision: http://reviews.llvm.org/D19728
llvm-svn: 268737
Summary:
There seems to have been a misunderstanding as to the meaning of 'offset' in
the rules laid down by our ABI. The previous code believed that 'offset' meant
the offset within the section that the relocation is applied to. However, it
should have meant the offset from the symbol used in the relocation expression.
This patch adds two fields to ELFRelocationEntry and uses them to correct the
order of relocations for MIPS. These fields contain:
* The original symbol before shouldRelocateWithSymbol() is considered. This
ensures that R_MIPS_GOT16 is able to correctly distinguish between local and
external symbols, allowing us to tell whether %got() requires a matching
%lo() or not (local symbols require one, external symbols don't). It also
prevents confusing cases where the fuzzy matching rules cause things like
%hi(foo)/%lo(foo+3) and %hi(bar)/%lo(bar+1) to swap their %lo()'s.
* The original offset before shouldRelocateWithSymbol() is considered. The
existing Addend field is always zero when the object uses in place addends
(because it's already moved it to the encoding) but MIPS needs to use the
original offset to ensure that the linker correctly calculates the carry-in
bit for %hi() and %got().
IAS ensures that unmatchable %hi()/%got() relocations are placed at the end of
the table to ensure that the linker rejects the table (we're unable to report
such errors directly). The alternatives to this risk accidental matching
against inappropriate relocations which may silently compute incorrect values
due to an incorrect carry bit between the %lo() and %hi()/%got().
Reviewers: sdardis
Subscribers: dsanders, sdardis, rafael, llvm-commits
Differential Revision: http://reviews.llvm.org/D19718
llvm-svn: 268733
Summary:
Version 2 is now the default. If you want to emit version 1, use
the amdgcn--amdhsa-amdcov1 triple.
Reviewers: arsenm, kzhuravl
Subscribers: arsenm, llvm-commits
Differential Revision: http://reviews.llvm.org/D19283
llvm-svn: 268647
[mips] On error, ParseDirective should always return false to signify that the
directive was understood.
Reviewers: dsanders, vkalintiris, sdardis
Subscribers: dsanders, llvm-commits, sdardis
Differential Revision: http://reviews.llvm.org/D19929
llvm-svn: 268630
As requested by Rafael Espindola in his post-commit comments on r268036. This
makes the previous behaviour the default while still allowing verification of
IAS.
llvm-svn: 268496
Summary:
This is much closer to the way MIPS relocation expressions work
(%hi(foo + 2) rather than %hi(foo) + 2) and removes the need for the
various bodges in MipsAsmParser::evaluateRelocExpr().
Removing those bodges ensures that the constant stored in MCValue is the
full 32 or 64-bit (depending on ABI) offset from the symbol. This will be used
to correct the %hi/%lo matching needed to sort the relocation table correctly.
As part of this:
* Gave MCExpr::print() the ability to omit parenthesis when emitting a
symbol reference inside a MipsMCExpr operator like %hi(X). Without this
we print things like %lo(($L1)).
* %hi(%neg(%gprel(X))) is now three MipsMCExpr's instead of one. Most of
the related special cases have been removed or moved to MipsMCExpr. We
can remove the rest as we gain support for the less common relocations
when they are not part of this specific combination.
* Renamed MipsMCExpr::VariantKind and the enum prefix ('VK_') to avoid confusion
with MCSymbolRefExpr::VariantKind and its prefix (also 'VK_').
* fixup_Mips_GOT_Local and fixup_Mips_GOT_Global were found to be identical
and merged into fixup_Mips_GOT.
* MO_GOT16 and MO_GOT turned out to be identical and have been merged into
MO_GOT.
* VK_Mips_GOT and VK_Mips_GOT16 turned out to be the same thing so they
have been merged into MEK_GOT
Reviewers: sdardis
Subscribers: dsanders, sdardis, llvm-commits
Differential Revision: http://reviews.llvm.org/D19716
llvm-svn: 268379
Summary:
This adds a unique ID to the COFF section uniquing map, similar to the
one we have for ELF. The unique id is not currently exposed via the
assembler because we don't have a use case for it yet. Users generally
create .pdata with the .seh_* family of directives, and the assembler
internally needs to produce .pdata and .xdata sections corresponding to
the code section.
The association between .text sections and the assembler-created .xdata
and .pdata sections is maintained as an ID field of MCSectionCOFF. The
CFI-related sections are created with the given unique ID, so if more
code is added to the same text section, we can find and reuse the CFI
sections that were already created.
Reviewers: majnemer, rafael
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D19376
llvm-svn: 268331
Summary:
This removes the temporary call to isIntegratedAssemblerRequired() which was
added recently. It's effect is now acheived directly in the MipsTargetStreamer
hierarchy.
Reviewers: sdardis
Subscribers: dsanders, sdardis, llvm-commits
Differential Revision: http://reviews.llvm.org/D19715
llvm-svn: 268058
Summary:
The portion in MipsAsmParser is responsible for figuring out which expansion to
use, while the portion in MipsTargetStreamer is responsible for emitting it.
This allows us to remove the call to isIntegratedAssemblerRequired() which is
currently ensuring the effect of .cprestore only occurs when writing objects.
The small functional change is that the memory offsets are now correctly
printed as signed values.
Reviewers: sdardis
Subscribers: dsanders, sdardis, llvm-commits
Differential Revision: http://reviews.llvm.org/D19714
llvm-svn: 268042
Summary:
The goal is for each operand type to have its own parse function and
at the same time share common code for tracking state as different
instruction types share operand types (e.g. glc/glc_flat, etc).
Introduce parseAMDGPUOperand which can parse any optional operand.
DPP and Clamp/OMod have custom handling for now. Sam also suggested
to have class hierarchy for operand types instead of table. This
can be done in separate change.
Remove parseVOP3OptionalOps, parseDS*OptionalOps, parseFlatOptionalOps,
parseMubufOptionalOps, parseDPPOptionalOps.
Reduce number of definitions of AsmOperand's and MatchClasses' by using common base class.
Rename AsmMatcher/InstPrinter methods accordingly.
Print immediate type when printing parsed immediate operand.
Use 'off' if offset/index register is unused instead of skipping it to make it more readable (also agreed with SP3).
Update tests.
Reviewers: tstellarAMD, SamWot, artem.tamazov
Subscribers: qcolombet, arsenm, llvm-commits
Differential Revision: http://reviews.llvm.org/D19584
llvm-svn: 268015
Revert "[Power9] Implement add-pc, multiply-add, modulo, extend-sign-shift, random number, set bool, and dfp test significance".
This patch has caused a functional regression in SPEC2k6 namd, and a performance regression in mesa-pipe.
llvm-svn: 267927
Added support of TTMP quads.
Reworked M0 exclusion machinery for SMRD and similar instructions
to enable usage of TTMP registers in those instructions as destinations.
Tests added.
Differential Revision: http://reviews.llvm.org/D19342
llvm-svn: 267733
Possibility to specify code of hardware register kept.
Disassemble to symbolic name, if name is known.
Tests updated/added.
Differential Revision: http://reviews.llvm.org/D19335
llvm-svn: 267724
Support for SDWA instructions for VOP1 and VOP2 encoding.
Not done yet:
- converters for support optional operands and modifiers
- VOPC
- sext() modifier
- intrinsics
- VOP2b (see vop_dpp.s)
- V_MAC_F32 (see vop_dpp.s)
Differential Revision: http://reviews.llvm.org/D19360
llvm-svn: 267553
Commit r266977 was reason for failing LLVM test suite with error message: fatal error: error in backend: Cannot select: t17: i32 = rotr t2, t11 ...
llvm-svn: 267418
The option to control the emission of the new relocations
is -relax-relocations (blatantly copied from GNU as).
It can't be enabled by default because it breaks relatively
recent versions of ld.bfd/ld.gold (late 2015).
llvm-svn: 267307
The relative vtable ABI (PR26723) needs PLT relocations to refer to virtual
functions defined in other DSOs. The unnamed_addr attribute means that the
function's address is not significant, so we're allowed to substitute it
with the address of a PLT entry.
Also includes a bonus feature: addends for COFF image-relative references.
Differential Revision: http://reviews.llvm.org/D17938
llvm-svn: 267211
We'd disabled them on x86 because back in the early days some host tools
couldn't handle the new load commands. This no longer holds: anyone capable of
deploying Clang should be able to deploy its copies of ar/ranlib/etc.
rdar://25254790
llvm-svn: 267075
Add ParseAMDGPURegister which can be invoked recursively for parsing lists.
Rename getRegForName to getSpecialRegForName.
Support legacy SP3 register list syntax: [s2,s3,s4,s5] or [flat_scratch_lo,flat_scratch_hi].
Add 64-bit registers TBA, TMA where missing.
Add some tests.
Differential Revision: http://reviews.llvm.org/D19163
llvm-svn: 266865
Order should match the sp3 syntax, where destination (simm16 denoting the hwreg) is coming first.
Differential Revision: http://reviews.llvm.org/D19161
llvm-svn: 266617
Summary:
When clang is given -save-temps or -via-file-asm, any inline assembly in
the source is parsed twice. Once by the compiler, and again by the
assembler. We must take care to ensure that this doesn't lead to
double-filling delay slots.
Reviewers: sdardis, vkalintiris
Subscribers: dsanders, sdardis, llvm-commits
Differential Revision: http://reviews.llvm.org/D19166
llvm-svn: 266608
Currently each Function points to a DISubprogram and DISubprogram has a
scope field. For member functions the scope is a DICompositeType. DIScopes
point to the DICompileUnit to facilitate type uniquing.
Distinct DISubprograms (with isDefinition: true) are not part of the type
hierarchy and cannot be uniqued. This change removes the subprograms
list from DICompileUnit and instead adds a pointer to the owning compile
unit to distinct DISubprograms. This would make it easy for ThinLTO to
strip unneeded DISubprograms and their transitively referenced debug info.
Motivation
----------
Materializing DISubprograms is currently the most expensive operation when
doing a ThinLTO build of clang.
We want the DISubprogram to be stored in a separate Bitcode block (or the
same block as the function body) so we can avoid having to expensively
deserialize all DISubprograms together with the global metadata. If a
function has been inlined into another subprogram we need to store a
reference the block containing the inlined subprogram.
Attached to https://llvm.org/bugs/show_bug.cgi?id=27284 is a python script
that updates LLVM IR testcases to the new format.
http://reviews.llvm.org/D19034
<rdar://problem/25256815>
llvm-svn: 266446
Alias 'jic $reg, 0' to 'jrc $reg' and 'jialc $reg, 0' to 'jalrc $reg' like
binutils.
This patch was previous committed as r266055 as seemed to have caused some spurious
test failures. They did not reappear after further local testing.
llvm-svn: 266301
Since we can't emit diagnostics for missing "jmp 1f" labels until the end of
the file, we need to be able to restore the context used to calculate
file/line. This is basically the "# line file" directive that's being used at
the time the expression is seen.
rdar://25706972
llvm-svn: 266238
This patch corresponds to review:
http://reviews.llvm.org/D17850
This patch implements the following instructions:
cmprb, cmpeqb, cnttzw, cnttzw., cnttzd, cnttzd.
llvm-svn: 266228
Tests added along with implemented feature.
Note that there is a small leftover of unecessary MI sheduling issue
(more info in the review). CodeGen/AMDGPU/salu-to-valu.ll updated to fix
the false regression.
TODO: Support for TTMP quads, comma-separated syntax in "[]" and more.
Differential Revision: http://reviews.llvm.org/D17825
llvm-svn: 266205
Differential Revision: http://reviews.llvm.org/D17137
This patch was reverted after the revertion of dependant patch http://reviews.llvm.org/D17068.
There was the problem with test-suite failure.
The problem is hopefully solved with dependant patch so this patch is commited again.
llvm-svn: 266179
This patch enables assembler support for .set arch=octeon.
It will fix issues with inline assembler when this directive is used.
Patch by Strahinja Petrovic.
Differential Revision: http://reviews.llvm.org/D18548
llvm-svn: 266081
Summary:
Alias 'jic $reg, 0' to 'jrc $reg' and 'jialc $reg, 0' to 'jalrc $reg' like
binutils.
Reviewers: dsanders
Differential Revision: http://reviews.llvm.org/D18856
llvm-svn: 266055
Before, ELF at least managed a diagnostic but it was a completely untraceable
"undefined symbol" error. MachO had a variety of even worse behaviours: crash,
emit corrupt file, or an equally bad message.
llvm-svn: 265984
When we see a .arch or .cpu directive, we should try to avoid switching
ARM/Thumb mode if possible.
If we do have to switch modes, we also need to emit the correct mapping
symbol for the new ISA. We did not do this previously, so could emit
ARM code with Thumb mapping symbols (or vice-versa).
The GAS behaviour is to always stay in the same mode, and to emit an
error on any instructions seen when the current mode is not available on
the current target. We can't represent that situation easily (we assume
that Thumb mode is available if ModeThumb is set), so we differ from the
GAS behaviour when switching to a target that can't support the old
mode. I've added a warning for when this implicit mode-switch occurs.
Differential Revision: http://reviews.llvm.org/D18955
llvm-svn: 265936
Restrict the max length of long nops for Lakemont to 7. Experiments on MCU
benchmarks (Dhrystone, Coremark) show that this is the most optimal length.
Differential Revision: http://reviews.llvm.org/D18897
llvm-svn: 265924
For VGPR_32 operand disassembler expects a VGPR register encoded as 0..255 (enum8 src operand).
readfirstlane/readline actually has enum9 operand and this change fixes VGPR_32 to VS_32 (enum9 encoding).
Differential Revision: http://reviews.llvm.org/D18696
llvm-svn: 265670
This patch implements the following BookII and Book III instructions:
- copy copy_first cp_abort paste paste. paste_last
- msgsync
- slbieg slbsync
- stop
Total 10 instructions
Reviewers: nemanjai hfinkel tjablin amehsan kbarton
llvm-svn: 265504
This patch adds support for compact jumps similiar to the previous compact
branch support for MIPSR6. Unlike compact branches, compact jumps do not
have a forbidden slot.
As MipsInstrInfo::getEquivalentCompactForm can determine the correct
expansion for jumps and branches for both microMIPS and MIPSR6, remove the
unnecessary distinction in the delay slot filler.
Reviewers: vkalintiris
Subscribers: llvm-commits, dsanders
llvm-svn: 265390
Summary:
At this point we should be able to enable IAS by default for O32 without
breaking check-all, or recursion.
Reviewers: vkalintiris
Subscribers: dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D18439
llvm-svn: 265302
This adds MC support for fused compare + indirect branch instructions,
ie. CRB, CGRB, CLRB, CLGRB, CIB, CGIB, CLIB, CLGIB. They aren't actually
generated yet -- this is preparation for their use for conditional
returns in the next iteration of D17339.
Author: koriakin
Differential Revision: http://reviews.llvm.org/D18742
llvm-svn: 265296
Add support for the AArch64 .cpu directive. This is a slightly involved
directive since the parameter is actually a variable encoded string. The
general structure is:
<cpu>[[+-]<feature>]*
We now map some of the supported string names for features for internal
representation of feature flags. If we encounter one which we do not support,
bail out as we cannot validate the assembly any longer.
Resolves PR27010.
llvm-svn: 265240
Summary: The assembler was picking the wrong JR variant because the pre-R6 one was still enabled at R6.
Author: nitesh.jain
Reviewers: vkalintiris, dsanders
Subscribers: dsanders, llvm-commits, mohit.bhakkad, sagar, bhushan, jaydeep
Differential: D18387
llvm-svn: 265134
Some ARM instructions encode 32-bit immediates as a 8-bit integer (0-255)
and a 4-bit rotation (0-30, even) in its least significant 12 bits. The
original fixup, FK_Data_4, patches the instruction by the value bit-to-bit,
regardless of the encoding. For example, assuming the label L1 and L2 are
0x0 and 0x104 respectively, the following instruction:
add r0, r0, #(L2 - L1) ; expects 0x104, i.e., 260
would be assembled to the following, which adds 1 to r0, instead of 260:
e2800104 add r0, r0, #4, 2 ; equivalently 1
The new fixup kind fixup_arm_mod_imm takes care of the encoding:
e2800f41 add r0, r0, #260
Patch by Ting-Yuan Huang!
llvm-svn: 265122
When a fixup that can be resolved by the assembler is out of range, we should
report an error in the source, rather than crashing.
Differential Revision: http://reviews.llvm.org/D18402
llvm-svn: 265120
isBrImm should accept any non-constant immediate. Previously it was only accepting LanaiMCExpr ones which was wrong.
Differential Revision: http://reviews.llvm.org/D18571
llvm-svn: 265032
This patch corresponds to review:
http://reviews.llvm.org/D18032
This patch provides asm implementation for the following instructions:
lwat, ldat, stwat, stdat, ldmx, mcrxrx
llvm-svn: 265022
Summary:
There are too many instructions to exhaustively test so addiu and lwc2 are
used as representative examples.
It should be noted that many memory instructions that should have simm16
range checking do not because it is also necessary to support the macro
of the same name which accepts simm32. The range checks for these occur in
the macro expansion.
Reviewers: vkalintiris
Subscribers: dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D18437
llvm-svn: 265019
Summary:
ldc2/sdc2 now emit slightly worse diagnostics for MIPS-I. The problem
is that they don't trigger the custom parser because all the candidates
are disabled by feature bits. On all other subtargets, the diagnostics are
accurate but are subject to the usual issues of needing to report multiple
ways to correct the code (e.g. smaller offset, enable a CPU feature) but
only being able to report one error.
Reviewers: vkalintiris
Subscribers: dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D18436
llvm-svn: 265018
Summary:
Also, made test_mi10.s formatting consistent with the majority of the
MC tests.
Reviewers: vkalintiris
Subscribers: dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D18435
llvm-svn: 265014
Summary:
The bug was that microMIPS's [ls]w[lr]e instructions claimed to support a
12-bit offset when it is only 9-bit.
Reviewers: vkalintiris
Subscribers: llvm-commits, dsanders
Differential Revision: http://reviews.llvm.org/D18434
llvm-svn: 265010
For compatability with GAS, nop and nopr are recognized as alises for
bc and bcr, respectively. A mask of 0 turns these instructions
effectively into no-operations.
Reviewed by Ulrich Weigand.
llvm-svn: 264875
This is a fix for PR26941.
When there is both a section and a global definition with the same
name, the global wins.
Section symbols are not added to the symbol table; section references
are left undefined and fixed up in the object writer unless they've
been satisfied by some other definition.
llvm-svn: 264649
The `MipsMCInstrAnalysis` class overrides the `evaluateBranch` method
and calculates target addresses for branch and calls instructions.
That allows llvm-objdump to print functions' names in branch instructions
in the disassemble mode.
Differential Revision: http://reviews.llvm.org/D18209
llvm-svn: 264309
The patch supports common STV_xxx visibility flags and MIPS specific
STO_MIPS_xxx flags.
Differential Revision: http://reviews.llvm.org/D18447
llvm-svn: 264300
If we can't handle a relocation type, report it as an error in the source,
rather than asserting. I've added a more descriptive message and a test for the
only cases of this that I've been able to trigger.
Differential Revision: http://reviews.llvm.org/D18388
llvm-svn: 264156
Summary:
Also renamed li_simm7 to li16_imm since it's not a simm7 and has an unusual
encoding (it's a uimm7 except that 0x7f represents -1).
Reviewers: vkalintiris
Subscribers: dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D18145
llvm-svn: 264056
Summary:
We can't check the error message for this one because there's another lw/sw
available that covers a larger range. We therefore check the transition
between the two sizes.
Reviewers: vkalintiris
Subscribers: llvm-commits, dsanders
Differential Revision: http://reviews.llvm.org/D18144
llvm-svn: 264054
Adding support for section names with special characters in them (e.g. "/").
GCC successfully compiles such section names.
This also fixes PR24520.
Differential Revision: http://reviews.llvm.org/D15678
llvm-svn: 264038
Autogenerated from the corresponding assembler tests with a few FIXME added (will fix soon).
Differential Revision: http://reviews.llvm.org/D18249
llvm-svn: 263729
That allows, for example, to print hex-formatted immediates using
llvm-objdump --print-imm-hex command line option.
Differential Revision: http://reviews.llvm.org/D18195
llvm-svn: 263704
This patch adds support for the MachO .alt_entry assembly directive, and uses
it for global aliases with non-zero GEP offsets. The alt_entry flag indicates
that a symbol should be layed out immediately after the preceding symbol.
Conceptually it introduces an alternate entry point for a function or data
structure. E.g.:
safe_foo:
// check preconditions for foo
.alt_entry fast_foo
fast_foo:
// body of foo, can assume preconditions.
The .alt_entry flag is also implicitly set on assembly aliases of the form:
a = b + C
where C is a non-zero constant, since these have the same effect as an
alt_entry symbol: they introduce a label that cannot be moved relative to the
preceding one. Setting the alt_entry flag on aliases of this form fixes
http://llvm.org/PR25381.
llvm-svn: 263521
s_bitset0_b64, s_bitset1_b64 has 32-bit src0, not 64-bit.
s_rfe_b64 has just one destination operand and no source.
Uncomment S_BITCMP* and S_SETVSKIP, adjust SOPC_* classes for that.
Add s_memrealtime test and change comments in smem.s to follow common style.
Change test for s_memtime to use non-zero register to make it really test encoding.
Add tests for s_buffer_load*.
Add tests for SOPC instructions (same for SI and VI)
Differential Revision: http://reviews.llvm.org/D18040
llvm-svn: 263420
The constant is now at source operand 1 (previously at 2).
This is also how it is in legacy AMD sp3 assembler.
Update tests.
Differential Revision: http://reviews.llvm.org/D17984
llvm-svn: 263212
This will allow inline assembler code to utilize these features, but no automatic lowering is provided, except for the previously provided @llvm.trap, which lowers to "ta 5".
The change also separates out the different assembly language syntaxes for V8 and V9 Sparc. Previously, only V9 Sparc assembly syntax was provided.
The change also corrects the selection order of trap disassembly, allowing, e.g. "ta %g0 + 15" to be rendered, more readably, as "ta 15", ignoring the %g0 register. This is per the sparc v8 and v9 manuals.
Check-in includes many extra unit tests to check this works correctly on both V8 and V9 Sparc processors.
Code Reviewed at http://reviews.llvm.org/D17960.
llvm-svn: 263044
Supprot DPP syntax as used in SP3 (except several operands syntax).
Added dpp-specific operands in td-files.
Added DPP flag to TSFlags to determine if instruction is dpp in InstPrinter.
Support for VOP2 DPP instructions in td-files.
Some tests for DPP instructions.
ToDo:
- VOP2bInst:
- vcc is considered as operand
- AsmMatcher doesn't apply mnemonic aliases when parsing operands
- v_mac_f32
- v_nop
- disable instructions with 64-bit operands
- change dpp_ctrl assembler representation to conform sp3
Review: http://reviews.llvm.org/D17804
llvm-svn: 263008
s_setpc_b64 has just one 64-bit source which is the address of instruction to jump to.
Differential Revision: http://reviews.llvm.org/D17888
llvm-svn: 263005
These correspond to IMAGE_ATOMIC_* and are going to be used by Mesa for the
GL_ARB_shader_image_load_store extension.
Initial change by Nicolai H.hnle
Differential Revision: http://reviews.llvm.org/D17401
llvm-svn: 262701
Previosy, if actual instruction have one of optional operands then other optional operands listed before this also should be presented.
For example instruction v_fract_f32 v0, v1, mul:2 have one optional operand - OMod and do not have optional operand clamp. Previously this was not allowed because clamp is listed before omod in AsmString:
string AsmString = "v_fract_f32$vdst, $src0_modifiers$clamp$omod";
Making this work required some hacks (both OMod and Clamp match classes have same PredicateMethod).
Now, if MatchInstructionImpl meets formal optional operand that is not presented in actual instruction it skips this formal operand and tries to match current actual operand with next formal.
Patch by: Sam Kolton
Review: http://reviews.llvm.org/D17568
[AMDGPU] Assembler: Check immediate types for several optional operands in predicate methods
With this change you should place optional operands in order specified by asm string:
clamp -> omod
offset -> glc -> slc -> tfe
Fixes for several tests.
Depends on D17568
Patch by: Sam Kolton
Review: http://reviews.llvm.org/D17644
llvm-svn: 262314
Summary:
The bug was that dextu's operand 3 would print 0-31 instead of 32-63 when
printing assembly. This came up when replacing
MipsInstPrinter::printUnsignedImm() with a version that could handle arbitrary
bit widths.
MipsAsmPrinter::printUnsignedImm*() don't seem to be used so they have been
removed.
Reviewers: vkalintiris
Subscribers: dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D15521
llvm-svn: 262231
Summary:
Previously, it would always select DEXT and substitute any invalid matches
for DEXTU/DEXTM during MipsMCCodeEmitter::encodeInstruction(). This works
but causes problems when adding range checked immediates to IAS.
Now isel selects the correct variant up front.
Reviewers: vkalintiris
Subscribers: dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D16810
llvm-svn: 262229
Previous check-in message was:
The patch adds missing registers and instructions to complete all the registers supported by the Sparc v8 manual.
These are all co-processor registers, with the exception of the floating-point deferred-trap queue register.
Although these will not be lowered automatically by any instructions, it allows the use of co-processor
instructions implemented by inline-assembly.
Code Reviewed at http://reviews.llvm.org/D17133, with the exception of a very small change in brace placement in SparcInstrInfo.td,
which was formerly causing a problem in the disassembly of the %fq register.
llvm-svn: 262135
These are all co-processor registers, with the exception of the floating-point deferred-trap queue register.
Although these will not be lowered automatically by any instructions, it allows the use of co-processor
instructions implemented by inline-assembly.
Code Reviewed at http://reviews.llvm.org/D17133, with the exception of a very small change in brace placement in SparcInstrInfo.td,
which was formerly causing a problem in the disassembly of the %fq register.
llvm-svn: 262133
This matches the behavior of the HSAIL clock instruction.
s_realmemtime is used if the subtarget supports it, and falls
back to s_memtime if not.
Also introduces new intrinsics for each of s_memtime / s_memrealtime.
llvm-svn: 262119
Add parsing and printing of image operands. Matches legacy sp3 assembler.
Change image instruction order to have data/image/sampler operands in the beginning. This is needed because optional operands in MC are always last.
Update SITargetLowering for new order.
Add basic MC test.
Update CodeGen tests.
Review: http://reviews.llvm.org/D17574
llvm-svn: 261995