The WHILE instructions generate a predicate that is true while the
comparison of the first scalar operand (incremented for each predicate
element) with the second scalar operand is true and false thereafter.
WHILELE While incrementing signed scalar less than or equal to scalar
WHILELO While incrementing unsigned scalar lower than scalar
WHILELS While incrementing unsigned scalar lower than or same as scalar
WHILELT While incrementing signed scalar less than scalar
e.g.
whilele p0.s, x0, x1
generates predicate p0 (for 32bit elements) by incrementing
(signed) x0 and comparing that vector to splat(x1).
llvm-svn: 338211
The instructions added in this patch permit active elements within
a vector to be processed sequentially without unpacking the vector.
PFIRST Set the first active element to true.
PNEXT Find next active element in predicate.
CTERMEQ Compare and terminate loop when equal.
CTERMNE Compare and terminate loop when not equal.
llvm-svn: 338210
This patch adds PFALSE (unconditionally sets all elements of
the predicate to false) and PTEST (set the status flags for the
predicate).
llvm-svn: 338198
This patch adds support for instructions that partition a predicate
based on data-dependent termination conditions in a loop.
BRKA Break after the first true condition
BRKAS Break after the first true condition, setting condition flags
BRKB Break before the first true condition
BRKBS Break before the first true condition, setting condition flags
BRKPA Break after the first true condition, propagating from the
previous partition
BRKPAS Break after the first true condition, propagating from the
previous partition, setting condition flags
BRKPB Break before the first true condition, propagating from the
previous partition
BRKPBS Break before the first true condition, propagating from the
previous partition, setting condition flags
BRKN Propagate break to next partition
BKRNS Propagate break to next partition, setting condition flags
llvm-svn: 338196
This patch adds support for various integer reduction operations:
SADDV signed add reduction to scalar
UADDV unsigned add reduction to scalar
SMAXV signed maximum reduction to scalar
SMINV signed minimum reduction to scalar
UMAXV unsigned maximum reduction to scalar
UMINV unsigned minimum reduction to scalar
ANDV logical AND reduction to scalar
ORV logical OR reduction to scalar
EORV logical EOR reduction to scalar
The reduction is predicated, e.g.
smaxv s0, p0, z1.s
performs a signed maximum reduction on active elements in z1,
and stores the (signed max value) result in s0.
llvm-svn: 338126
This patch adds support for various floating-point
reduction operations:
FADDA strictly-ordered add reduction, accumulating in scalar
FADDV recursive add reduction to scalar
FMAXV recursive max reduction to scalar
FMINV recursive min reduction to scalar
FMAXNMV recursive max number reduction to scalar
FMINNMV recursive min number reduction to scalar
The reduction is predicated, e.g.
fadda d0, p0, d0, z1.d
performs the add-reduction in strict order on active elements
in z1, accumulating into d0.
faddv d0, p0, z1.d
performs the add-reduction (not in strict order)
on active elements in z1, storing the result in d0.
llvm-svn: 338123
This patch adds support for transcendental acceleration
instructions 'FEXPA' (exponential accelerator) and 'FTSSEL'
(trigonometric select coefficient).
llvm-svn: 338121
- Some of the v8.3 pointer authentication instruction inhabit the Hint space
- These instructions can be assembled to hint instructions which act as NOP instructions prior to v8.3
- This patch permits using the hint instructions for all v8a targets
- Also, correct the RETA{A,B} instructions to match the instruction attributes of RET (set isTerminator and isBarrier)
Differential Revision: https://reviews.llvm.org/D49786
llvm-svn: 338029
This adds MC support for the crypto instructions that were made optional
extensions in Armv8.2-A (AArch64 only).
Differential Revision: https://reviews.llvm.org/D49370
llvm-svn: 338010
This patch adds the following instructions:
RBIT reverse bits within each active elemnt (predicated), e.g.
rbit z0.d, p0/m, z1.d
for 8, 16, 32 and 64 bit elements.
REV reverse order of elements in data/predicate vector
(unpredicated), e.g.
rev z0.d, z1.d
rev p0.d, p1.d
for 8, 16, 32 and 64 bit elements.
REVB reverse order of bytes within each active element, e.g.
revb z0.d, p0/m, z1.d
for 16, 32 and 64 bit elements.
REVH reverse order of 16-bit half-words within each active
element, e.g.
revh z0.d, p0/m, z1.d
for 32 and 64 bit elements.
REVW reverse order of 32-bit words within each active element,
e.g.
revw z0.d, p0/m, z1.d
for 64 bit elements.
llvm-svn: 337534
This patch adds support for the following unpredicated
floating-point instructions:
FADD Floating point add
FSUB Floating point subtract
FMUL Floating point multiplication
FTSMUL Floating point trigonometric starting value
FRECPS Floating point reciprocal step
FRSQRTS Floating point reciprocal square root step
The instructions have the following assembly format:
fadd z0.h, z1.h, z2.h
and have variants for 16, 32 and 64-bit FP elements.
llvm-svn: 337383
The signed/unsigned DOT instructions perform a dot-product on
quadtuplets from two source vectors and accumulate the result in
the destination register. The instructions come in two forms:
Vector form, e.g.
sdot z0.s, z1.b, z2.b - signed dot product on four 8-bit quad-tuplets,
accumulating results in 32-bit elements.
udot z0.d, z1.h, z2.h - unsigned dot product on four 16-bit quad-tuplets,
accumulating results in 64-bit elements.
Indexed form, e.g.
sdot z0.s, z1.b, z2.b[3] - signed dot product on four 8-bit quad-tuplets
with specified quadtuplet from second
source vector, accumulating results in 32-bit
elements.
udot z0.d, z1.h, z2.h[1] - dot product on four 16-bit quad-tuplets
with specified quadtuplet from second
source vector, accumulating results in 64-bit
elements.
llvm-svn: 337372
This patch adds the following predicated instructions:
UDIV Unsigned divide active elements
UDIVR Unsigned divide active elements, reverse form.
SDIV Signed divide active elements
SDIVR Signed divide active elements, reverse form.
e.g.
udiv z0.s, p0/m, z0.s, z1.s
(unsigned divide active elements in z0 by z1, store result in z0)
sdivr z0.s, p0/m, z0.s, z1.s
(signed divide active elements in z1 by z0, store result in z0)
llvm-svn: 337369
This patch adds the following instructions:
MUL - multiply vectors, e.g.
mul z0.h, p0/m, z0.h, z1.h
- multiply with immediate, e.g.
mul z0.h, z0.h, #127
SMULH - signed multiply returning high half, e.g.
smulh z0.h, p0/m, z0.h, z1.h
UMULH - unsigned multiply returning high half, e.g.
umulh z0.h, p0/m, z0.h, z1.h
llvm-svn: 337358
This patch completes support for the following floating point
instructions that take FP immediates:
FADD* (addition)
FSUB (subtract)
FSUBR (subtract reverse form)
FMUL* (multiplication)
FMAX* (maximum)
FMAXNM (maximum number)
FMIN (maximum)
FMINNM (maximum number)
All operations are predicated and take a FP immediate operand,
e.g.
fadd z0.h, p0/m, z0.h, #0.5
fmin z0.s, p0/m, z0.s, #1.0
^___________^ (tied)
* Instructions added in a previous patch.
llvm-svn: 337272
The SPLICE instruction splices two vectors into one vector using a
predicate. It copies the active elements from the first vector, and
then fills the remaining elements with the low-numbered elements from
the second vector.
The instruction has the following form, e.g.
splice z0.b, p0, z0.b, z1.b
for 8-bit elements. It also supports 16, 32 and
64-bit elements.
llvm-svn: 337253
This patch adds an instruction that allows extracting
a vector from a pair of vectors, given an immediate index
that describes the element position to extract from.
The instruction has the following assembly:
ext z0.b, z0.b, z1.b, #imm
where #imm is an immediate between 0 and 255.
llvm-svn: 337251
This patch adds support for the following unpack instructions:
- PUNPKLO, PUNPKHI Unpack elements from low/high half and
place into elements of twice their size.
e.g. punpklo p0.h, p0.b
- UUNPKLO, UUNPKHI Unpack elements from low/high half and
SUNPKLO, SUNPKHI place into elements of twice their size
after zero- or sign-extending the values.
e.g. uunpklo z0.h, z0.b
llvm-svn: 336982
The compact instruction shuffles active elements of vector
into lowest numbered elements and sets remaining elements
to zero.
e.g.
compact z0.s, p0, z1.s
llvm-svn: 336789
The LASTB and LASTA instructions extract the last active element,
or element after the last active, from the source vector.
The added variants are:
Scalar:
last(a|b) w0, p0, z0.b
last(a|b) w0, p0, z0.h
last(a|b) w0, p0, z0.s
last(a|b) x0, p0, z0.d
SIMD & FP Scalar:
last(a|b) b0, p0, z0.b
last(a|b) h0, p0, z0.h
last(a|b) s0, p0, z0.s
last(a|b) d0, p0, z0.d
The CLASTB and CLASTA conditionally extract the last or element after
the last active element from the source vector.
The added variants are:
Scalar:
clast(a|b) w0, p0, w0, z0.b
clast(a|b) w0, p0, w0, z0.h
clast(a|b) w0, p0, w0, z0.s
clast(a|b) x0, p0, x0, z0.d
SIMD & FP Scalar:
clast(a|b) b0, p0, b0, z0.b
clast(a|b) h0, p0, h0, z0.h
clast(a|b) s0, p0, s0, z0.s
clast(a|b) d0, p0, d0, z0.d
Vector:
clast(a|b) z0.b, p0, z0.b, z1.b
clast(a|b) z0.h, p0, z0.h, z1.h
clast(a|b) z0.s, p0, z0.s, z1.s
clast(a|b) z0.d, p0, z0.d, z1.d
Please refer to the architecture specification for more details on
the semantics of the added instructions.
llvm-svn: 336783
This patch adds support for the following instructions:
CLS (Count Leading Sign bits)
CLZ (Count Leading Zeros)
CNT (Count non-zero bits)
CNOT (Logically invert boolean condition in vector)
NOT (Bitwise invert vector)
FABS (Floating-point absolute value)
FNEG (Floating-point negate)
All operations are predicated and unary, e.g.
clz z0.s, p0/m, z1.s
- CLS, CLZ, CNT, CNOT and NOT have variants for 8, 16, 32
and 64 bit elements.
- FABS and FNEG have variants for 16, 32 and 64 bit elements.
llvm-svn: 336677
This patch adds support for the following instructions:
CNTB CNTH - Determine the number of active elements implied by
CNTW CNTD the named predicate constant, multiplied by an
immediate, e.g.
cnth x0, vl8, #16
CNTP - Count active predicate elements, e.g.
cntp x0, p0, p1.b
counts the number of active elements in p1, predicated
by p0, and stores the result in x0.
llvm-svn: 336552
This patch completes support for shifts, which include:
- LSL - Logical Shift Left
- LSLR - Logical Shift Left, Reversed form
- LSR - Logical Shift Right
- LSRR - Logical Shift Right, Reversed form
- ASR - Arithmetic Shift Right
- ASRR - Arithmetic Shift Right, Reversed form
- ASRD - Arithmetic Shift Right for Divide
In the following variants:
- Predicated shift by immediate - ASR, LSL, LSR, ASRD
e.g.
asr z0.h, p0/m, z0.h, #1
(active lanes of z0 shifted by #1)
- Unpredicated shift by immediate - ASR, LSL*, LSR*
e.g.
asr z0.h, z1.h, #1
(all lanes of z1 shifted by #1, stored in z0)
- Predicated shift by vector - ASR, LSL*, LSR*
e.g.
asr z0.h, p0/m, z0.h, z1.h
(active lanes of z0 shifted by z1, stored in z0)
- Predicated shift by vector, reversed form - ASRR, LSLR, LSRR
e.g.
lslr z0.h, p0/m, z0.h, z1.h
(active lanes of z1 shifted by z0, stored in z0)
- Predicated shift left/right by wide vector - ASR, LSL, LSR
e.g.
lsl z0.h, p0/m, z0.h, z1.d
(active lanes of z0 shifted by wide elements of vector z1)
- Unpredicated shift left/right by wide vector - ASR, LSL, LSR
e.g.
lsl z0.h, z1.h, z2.d
(all lanes of z1 shifted by wide elements of z2, stored in z0)
*Variants added in previous patches.
llvm-svn: 336547
Support for SVE's TBL instruction for programmable table
lookup/permute using vector of element indices, e.g.
tbl z0.d, { z1.d }, z2.d
stores elements from z1, indexed by elements from z2, into z0.
llvm-svn: 336544
This patch adds support for:
UZP1 Concatenate even elements from two vectors
UZP2 Concatenate odd elements from two vectors
TRN1 Interleave even elements from two vectors
TRN2 Interleave odd elements from two vectors
With variants for both data and predicate vectors, e.g.
uzp1 z0.b, z1.b, z2.b
trn2 p0.s, p1.s, p2.s
llvm-svn: 336531
a deficiency in TableGen that has been addressed in r336334.
[AArch64][SVE] Asm: Support for predicated FP rounding instructions.
This patch also adds instructions for predicated FP square-root and
reciprocal exponent.
The added instructions are:
- FRINTI Round to integral value (current FPCR rounding mode)
- FRINTX Round to integral value (current FPCR rounding mode, signalling inexact)
- FRINTA Round to integral value (to nearest, with ties away from zero)
- FRINTN Round to integral value (to nearest, with ties to even)
- FRINTZ Round to integral value (toward zero)
- FRINTM Round to integral value (toward minus Infinity)
- FRINTP Round to integral value (toward plus Infinity)
- FSQRT Floating-point square root
- FRECPX Floating-point reciprocal exponent
llvm-svn: 336387
This patch also adds instructions for predicated FP square-root and
reciprocal exponent.
The added instructions are:
- FRINTI Round to integral value (current FPCR rounding mode)
- FRINTX Round to integral value (current FPCR rounding mode, signalling inexact)
- FRINTA Round to integral value (to nearest, with ties away from zero)
- FRINTN Round to integral value (to nearest, with ties to even)
- FRINTZ Round to integral value (toward zero)
- FRINTM Round to integral value (toward minus Infinity)
- FRINTP Round to integral value (toward plus Infinity)
- FSQRT Floating-point square root
- FRECPX Floating-point reciprocal exponent
llvm-svn: 336322
This patch adds both a vector and an immediate form, e.g.
- Vector form:
subr z0.h, p0/m, z0.h, z1.h
subtract active elements of z0 from z1, and store the result in z0.
- Immediate form:
subr z0.h, z0.h, #255
subtract elements of z0, and store the result in z0.
llvm-svn: 336274
SVE overloads the AArch64 PSTATE condition flags and introduces
a set of condition code aliases for the assembler. The
details are described in section 2.2 of the architecture
reference manual supplement for SVE.
In short:
SVE alias => AArch64 name
--------------------------
NONE => EQ
ANY => NE
NLAST => HS
LAST => LO
FIRST => MI
NFRST => PL
PMORE => HI
PLAST => LS
TCONT => GE
TSTOP => LT
Reviewers: rengolin, fhahn, SjoerdMeijer, samparker, javed.absar
Reviewed By: fhahn
Differential Revision: https://reviews.llvm.org/D48869
llvm-svn: 336245
Unpredicated FP-multiply of SVE vector with a vector-element given by
vector[index], for example:
fmul z0.s, z1.s, z2.s[0]
which performs an unpredicated FP-multiply of all 32-bit elements in
'z1' with the first element from 'z2'.
This patch adds restricted register classes for SVE vectors:
ZPR_3b (only z0..z7 are allowed) - for indexed vector of 16/32-bit elements.
ZPR_4b (only z0..z15 are allowed) - for indexed vector of 64-bit elements.
Reviewers: rengolin, fhahn, SjoerdMeijer, samparker, javed.absar
Reviewed By: fhahn
Differential Revision: https://reviews.llvm.org/D48823
llvm-svn: 336205
This adds the following system registers:
- RAS registers,
- MPAM registers,
- Activitiy monitor registers,
- Trace Extension registers,
- Timing insensitivity of data processing instructions,
- Enhanced Support for Nested Virtualization.
Differential Revision: https://reviews.llvm.org/D48871
llvm-svn: 336193
Increment/decrement vector by multiple of predicate constraint
element count.
The variants added by this patch are:
- INCH, INCW, INC
and (saturating):
- SQINCH, SQINCW, SQINCD
- UQINCH, UQINCW, UQINCW
- SQDECH, SQINCW, SQINCD
- UQDECH, UQINCW, UQINCW
For example:
incw z0.s, all, mul #4
llvm-svn: 336090
These patches were previously reverted as they led to
buildbot time-outs caused by large switch statement in
printAliasInstr when using UBSan and O3. The issue has
been addressed with a workaround (r335525).
llvm-svn: 336079
Move expected-fail cases from directive-cpu.s to
directive-cpu-err.s. This allows us to remove the 'not' from the
llvm-mc invocation in directive-cpu.s so that this test will fail
in unexpected error cases. It also means that we are not relying
on all stderr coming before any stdout, which seems fragile.
Also make use of CHECK-NEXT to ensure that multiline error messages
really are occuring together.
And add a test to verify that .cpu with an arch version as extension
is rejected.
Differential Revision: https://reviews.llvm.org/D47873
llvm-svn: 335586
These were specifying an architecture version with .cpu directive,
which is invalid. As the error for this case outputs the problem
instruction we were still matching the expectations of FileCheck.
This patch fixes up the LSE tests to do what they seem to intend. A
follow-up patch will tighten up the directive tests.
Differential Revision: https://reviews.llvm.org/D47872
llvm-svn: 335585
This patch uses the DiagnosticPredicate for SVE predicate patterns
to improve their diagnostics, now giving a 'invalid operand' diagnostic
if the type is not an immediate or one of the expected pattern
labels.
Reviewers: samparker, SjoerdMeijer, javed.absar, fhahn
Reviewed By: fhahn
Differential Revision: https://reviews.llvm.org/D48220
llvm-svn: 334983
The variants added by this patch are:
- SQINC signed increment, e.g. sqinc x0, w0, all, mul #4
- SQDEC signed decrement, e.g. sqdec x0, w0, all, mul #4
- UQINC unsigned increment, e.g. uqinc w0, all, mul #4
- UQDEC unsigned decrement, e.g. uqdec w0, all, mul #4
This patch includes asmparser changes to parse a GPR64 as a GPR32 in
order to satisfy the constraint check:
x0 == GPR64(w0)
in:
sqinc x0, w0, all, mul #4
^___^ (must match)
Reviewers: rengolin, fhahn, SjoerdMeijer, samparker, javed.absar
Reviewed By: fhahn
Differential Revision: https://reviews.llvm.org/D47716
llvm-svn: 334980
This patch adds instructions for comparing elements from two vectors, e.g.
cmpgt p0.s, p0/z, z0.s, z1.s
and also adds support for comparing to a 64-bit wide element vector, e.g.
cmpgt p0.s, p0/z, z0.s, z1.d
The patch also contains aliases for certain comparisons, e.g.:
cmple p0.s, p0/z, z0.s, z1.s => cmpge p0.s, p0/z, z1.s, z0.s
cmplo p0.s, p0/z, z0.s, z1.s => cmphi p0.s, p0/z, z1.s, z0.s
cmpls p0.s, p0/z, z0.s, z1.s => cmphs p0.s, p0/z, z1.s, z0.s
cmplt p0.s, p0/z, z0.s, z1.s => cmpgt p0.s, p0/z, z1.s, z0.s
llvm-svn: 334931
Support for SVE's predicated select instructions to select elements
from either vector, both in a data-vector and a predicate-vector
variant.
llvm-svn: 334905
Increment/decrement scalar register by (scaled) element count given by
predicate pattern, e.g. 'incw x0, all, mul #4'.
Reviewers: rengolin, fhahn, SjoerdMeijer, samparker, javed.absar
Reviewed By: SjoerdMeijer
Differential Revision: https://reviews.llvm.org/D47713
llvm-svn: 334838
All COFF targets should use @IMGREL32 relocations for symbol differences
against __ImageBase. Do the same for getSectionForConstant, so that
immediates lowered to globals get merged across TUs.
Patch by Chris January
Differential Revision: https://reviews.llvm.org/D47783
llvm-svn: 334523
For immediates used in DUP instructions that have the range
-128 to 127, or a multiple of 256 in the range -32768 to 32512,
one could argue that when the result element size is 16bits (.h),
the value can be considered both signed and unsigned.
Reviewers: rengolin, fhahn, SjoerdMeijer, samparker, javed.absar
Reviewed By: fhahn
Differential Revision: https://reviews.llvm.org/D47619
llvm-svn: 333873
Print the first indexed element as a FP register, for example:
mov z0.d, z1.d[0]
Is now printed as:
mov z0.d, d1
Next to printing, this patch also adds aliases to parse 'mov z0.d, d1'.
Reviewers: rengolin, fhahn, samparker, SjoerdMeijer, javed.absar
Reviewed By: fhahn
Differential Revision: https://reviews.llvm.org/D47571
llvm-svn: 333872
Unpredicated copy of indexed SVE element to SVE vector,
along with MOV-aliases.
For example:
dup z0.h, z1.h[0]
duplicates the first 16-bit element from z1 to all elements in
the result vector z0.
Reviewers: rengolin, fhahn, samparker, SjoerdMeijer, javed.absar
Reviewed By: SjoerdMeijer
Differential Revision: https://reviews.llvm.org/D47570
llvm-svn: 333871
Predicated copy of floating-point immediate value to SVE vector,
along with MOV-aliases.
Reviewers: rengolin, fhahn, samparker, SjoerdMeijer, javed.absar
Reviewed By: javed.absar
Differential Revision: https://reviews.llvm.org/D47518
llvm-svn: 333869
Predicated copy of possibly shifted immediate value into SVE
vector, along with MOV-aliases.
Reviewers: rengolin, fhahn, samparker, SjoerdMeijer, javed.absar
Reviewed By: fhahn
Differential Revision: https://reviews.llvm.org/D47517
llvm-svn: 333868
Unpredicated copy of floating-point immediate value into SVE vector,
along with MOV-aliases.
Reviewers: rengolin, fhahn, samparker, SjoerdMeijer, javed.absar
Reviewed By: fhahn
Differential Revision: https://reviews.llvm.org/D47482
llvm-svn: 333744
Instead of asserting when using the def_cfa directive with a register
different from fp, fallback on DWARF.
Easily triggered with:
.cfi_def_cfa x1, 32;
rdar://40249694
Differential Revision: https://reviews.llvm.org/D47593
llvm-svn: 333667
Floating point immediate combining a negative sign and
a hexadecimal number, e.g. #-0x0 caused the compiler to crash.
Reviewers: rengolin, fhahn, samparker, SjoerdMeijer, javed.absar
Reviewed By: javed.absar
Differential Revision: https://reviews.llvm.org/D47483
llvm-svn: 333524
This patch addresses the following variants:
- bitmask immediate, e.g. 'and z0.d, z0.d, #0x6'.
- unpredicated data vectors, e.g. 'and z0.d, z1.d, z2.d'.
- predicated data vectors, e.g. 'and z0.d, p0/m, z0.d, z1.d'.
And also several aliases, such as:
- ORN, alias of ORR.
- EON, alias of EOR.
- BIC, alias of AND (immediate variant)
- MOV, alias of ORR (if unpredicated and source register operands are the same)
Reviewers: rengolin, huntergr, fhahn, samparker, SjoerdMeijer, javed.absar
Reviewed By: fhahn
Differential Revision: https://reviews.llvm.org/D47363
llvm-svn: 333414
This patch adds addsub_imm8_opt_lsl_(i8|i16|i32|i64) operands
that are unsigned values in the range 0 to 255. For element widths of
16 bits or higher it may also be a signed multiple of 256 in the
range 0 to 65280.
Note: This also does some refactoring to reuse convenience function
getShiftedVal<shift>(), and now allows AArch64 scalar 'ADD #-4096' to be
accepted to be mapped to SUB #4096.
Reviewers: rengolin, fhahn, samparker, SjoerdMeijer, javed.absar
Reviewed By: fhahn
Differential Revision: https://reviews.llvm.org/D47310
llvm-svn: 333408
Unpredicated copy of optionally-shifted immediate to SVE vector,
along with MOV-aliases.
This patch contains parsing and printing support for
cpy_imm8_opt_lsl_(i8|i16|i32|i64). This operand allows a signed value in
the range -128 to +127. For element widths of 16 bits or higher it may
also be a signed multiple of 256 in the range -32768 to +32512.
For element-width of 8 bits a range of -128 to 255 is accepted, since a copy
of a byte can be considered either signed/unsigned.
Note: This patch renames tryParseAddSubImm() -> tryParseImmWithOptionalShift()
and moves the behaviour of trying to shift a plain immediate by an allowed
shift-value to its addImmWithOptionalShiftOperands() method, so that the
parsing itself is generic and allows immediates from multiple shifted operands.
This is done because an immediate can be divisible by both shifted operands.
Reviewers: rengolin, fhahn, samparker, SjoerdMeijer, javed.absar
Reviewed By: fhahn
Differential Revision: https://reviews.llvm.org/D47309
llvm-svn: 333263
For regular SVE vector operands, this patch introduces a more
sensible diagnostic when the vector has a wrong suffix (e.g. z0.s vs z0.b).
For example:
add z0.s, z1.s, z2.b -> invalid element width
^_____^
mismatch
For the vector-with-shift/extend (e.g. z0.s, uxtw #2) this patch takes
a slightly different approach and instead returns a 'invalid operand'
if the element size is not as expected. This is because the diagnostics
are more specificied to suggest using the right shift/extend suffix. This
is a trade-off not to introduce more operand classes and still provide
useful diagnostics for LD1 and PRF instructions.
For example:
ld1w z1.s, p0/z, [x0, z0.s] -> invalid shift/extend specified, expected 'z[0..31].s, (uxtw|sxtw)'
ld1w z1.d, p0/z, [x0, z0.s] -> invalid operand
^________________^
mismatch
For gather prefetches, both 'z0.s' and 'z0.d' would be allowed:
prfw #0, p0, [x0, z0.s] -> invalid shift/extend specified, expected 'z[0..31].s, (uxtw|sxtw) #2'
prfw #0, p0, [x0, z0.d] -> invalid shift/extend specified, expected 'z[0..31].d, (lsl|uxtw|sxtw) #2'
Without this change, the diagnostic would unnecessarily suggest a
different element size:
prfw #0, p0, [x0, z0.s] -> invalid shift/extend specified, expected 'z[0..31].d, (lsl|uxtw|sxtw) #2'
Reviewers: SjoerdMeijer, aemerson, fhahn, samparker, javed.absar
Reviewed By: SjoerdMeijer
Differential Revision: https://reviews.llvm.org/D46688
llvm-svn: 332483
In order to set breakpoints on labels and list source code around
labels, we need collect debug information for labels, i.e., label
name, the function label belong, line number in the file, and the
address label located. In order to keep these information in LLVM
IR and to allow backend to generate debug information correctly.
We create a new kind of metadata for labels, DILabel. The format
of DILabel is
!DILabel(scope: !1, name: "foo", file: !2, line: 3)
We hope to keep debug information as much as possible even the
code is optimized. So, we create a new kind of intrinsic for label
metadata to avoid the metadata is eliminated with basic block.
The intrinsic will keep existing if we keep it from optimized out.
The format of the intrinsic is
llvm.dbg.label(metadata !1)
It has only one argument, that is the DILabel metadata. The
intrinsic will follow the label immediately. Backend could get the
label metadata through the intrinsic's parameter.
We also create DIBuilder API for labels to be used by Frontend.
Frontend could use createLabel() to allocate DILabel objects, and use
insertLabel() to insert llvm.dbg.label intrinsic in LLVM IR.
Differential Revision: https://reviews.llvm.org/D45024
Patch by Hsiangkai Wang.
llvm-svn: 331841
Patch https://reviews.llvm.org/D41445 changed the behaviour of 'isReg()'
to also return 'true' if the parsed register operand is a vector
register. Code in the AsmMatcher checks if a register is a subclass of the
expected register class. However, even though both parsed registers map
to the same physical register, the 'v' register is of kind 'NeonVector',
where 'q' is of type Scalar, where isSubclass() does not distinguish
between the two cases.
The solution is to use an AsmOperand instead of the register directly,
and use the PredicateMethod to distinguish the two operands.
This fixes for example:
ldr v0, [x0] // 'v0' is an invalid operand for this instruction
ldr q0, [x0] // valid
Reviewers: aemerson, Gerolf, SjoerdMeijer, javed.absar
Reviewed By: aemerson
Differential Revision: https://reviews.llvm.org/D46310
llvm-svn: 331755
This patch extends the 'isSVEVectorRegWithShiftExtend' function to
improve diagnostics for SVE's gather load (scalar + vector) addressing
modes. Instead of always suggesting the 'unscaled' addressing mode,
the use of DiagnosticPredicate enables a more specific error message
in the context where the scaling is incorrect. For example:
ld1h z0.d, p0/z, [x0, z0.d, lsl #2]
^
shift amount should be '1'
Instead of suggesting the packed, unscaled addressing mode:
expected 'z[0..31].d, (uxtw|sxtw)'
the assembler now suggests using the proper scaling:
expected 'z[0..31].d, (lsl|uxtw|sxtw) #1'
Reviewers: fhahn, rengolin, samparker, SjoerdMeijer, javed.absar
Reviewed By: fhahn
Differential Revision: https://reviews.llvm.org/D46124
llvm-svn: 331162
This patch extends the PredicateMethod of AsmOperands used in SVE's
LD1 instructions with a DiagnosticPredicate. This makes them 'context
sensitive' to the operand that has been parsed and tells the user to
use the right register (with expected shift/extend), rather than telling
the immediate is out of range when it actually parsed a register.
Patch [2/2] in a series to improve assembler diagnostics for SVE:
- Patch [1/2]: https://reviews.llvm.org/D45879
- Patch [2/2]: https://reviews.llvm.org/D45880
Reviewers: olista01, stoklund, craig.topper, mcrosier, rengolin, echristo, fhahn, SjoerdMeijer, evandro, javed.absar
Reviewed By: fhahn
Differential Revision: https://reviews.llvm.org/D45880
llvm-svn: 330934
Summary:
Added instructions for contiguous stores, ST1, with scalar+imm addressing
modes and corresponding tests. The patch also adds parsing of
'mul vl' as needed for the VL-scaled immediate.
This is patch [6/6] in a series to add assembler/disassembler support for
SVE's contiguous ST1 (scalar+imm) instructions.
Reviewers: fhahn, rengolin, javed.absar, huntergr, SjoerdMeijer, t.p.northover, echristo, evandro
Reviewed By: rengolin
Subscribers: tschuett, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D45432
llvm-svn: 330014
Summary:
Merged 'tryMatchVectorRegister' (specific to Neon) and
'tryParseSVERegister' into a single 'tryParseVectorRegister' function, and
created a generic 'parseVectorKind()' function that returns the #Elements
and ElementWidth of a vector suffix. This reduces the duplication of
this functionality between two the vector implementations.
This is patch [1/6] in a series to add assembler/disassembler support for
SVE's contiguous ST1 (scalar+imm) instructions.
Reviewers: fhahn, rengolin, javed.absar, huntergr, SjoerdMeijer, t.p.northover, echristo, evandro
Reviewed By: fhahn
Subscribers: tschuett, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D45427
llvm-svn: 329782
This commit fixes the bot failures that were coming up before with r329716.
The fix was to move the check for "isInSection()" inside of the if condition
and emit the error there instead of waiting to get past the unreachable statement.
This should work in debug and release builds now.
llvm-svn: 329746
There was missing nullptr check before a call to getSection() in
recordRelocation. This would result in a segfault in code like the attached
test.
This adds the missing check and a test which makes sure we get the expected
error output.
llvm-svn: 329716
Much like any written register in load/store instructions, the status register
is not allowed to overlap with any others. So diagnose it like we already do
with the other cases.
llvm-svn: 329687
Summary: Adds support for the SVE AND instruction with vector and logical-immediate operands, and their corresponding aliases.
Reviewers: fhahn, rengolin, samparker, echristo, aadg, kristof.beyls
Reviewed By: fhahn
Subscribers: aemerson, javed.absar, tschuett, llvm-commits
Differential Revision: https://reviews.llvm.org/D42295
llvm-svn: 324343
Fixed issue that was found on sanitizer-x86_64-linux-fast.
I changed the result type of 'Parser.getTok().getString().lower()'
in AArch64AsmParser::tryParseSVEPredicateVector() from 'StringRef' to
'auto', since StringRef::lower() returns a std::string.
llvm-svn: 322092
This patch resubmits the SVE ZIP1/ZIP2 patch series consisting of
of r320992, r320986, r320973, and r320970 by reverting
https://reviews.llvm.org/rL321024.
The issue that caused r321024 has been addressed in https://reviews.llvm.org/rL321158,
so this patch-series should be safe to resubmit.
llvm-svn: 321163
Implement the 'Current Cache Size' register that has been introduced
as part of the Armv8.3 architecture. I originally missed this, and
(hopefully) should be the final patch for assembler support.
Differential Revision: https://reviews.llvm.org/D41396
llvm-svn: 321155
This reverts changes r320992, r320986, r320973, and r320970.
r320970 by itself breaks the test case, and the rest depend on it.
Test case will land soon.
llvm-svn: 321024
Summary: Patch [4/4] in a series to add parsing of predicates and properly parse SVE ZIP1/ZIP2 instructions. This patch further improves diagnostic messages for when the SVE feature is not specified.
Reviewers: rengolin, fhahn, olista01, echristo, efriedma
Reviewed By: fhahn
Subscribers: sdardis, aemerson, javed.absar, tschuett, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D40363
llvm-svn: 320992
Summary:
When emitting a diagnostic for an invalid operand, a specific diagnostic
should only be reported when the instruction being matched is actually
enabled by the feature flags.
Patch [3/4] in a series to add parsing of predicates and properly parse SVE
ZIP1/ZIP2 instructions. This patch fixes bogus diagnostic messages for when
the SVE feature is not specified.
Reviewers: rengolin, craig.topper, olista01, sdardis, stoklund
Reviewed By: olista01, sdardis
Subscribers: fhahn, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D40362
llvm-svn: 320986
For Cylone, the instruction "movi.2d vD, #0" is executed incorrectly in some rare
circumstances. Work around the issue conservatively by avoiding the instruction entirely.
This patch changes CodeGen so that problematic instructions are never
generated, and the AsmParser so that an equivalent instruction is used (with a
warning).
llvm-svn: 320965
Summary:
The generated diagnostic by the AsmMatcher isn't always applicable to the AsmOperand.
This is because the code will only update the diagnostic if it is more
specific than the previous diagnostic. However, when having validated
operands and 'moved on' to a next operand (for some instruction/alias for
which all previous operands are valid), if the diagnostic is InvalidOperand,
than that should be set as the diagnostic, not the more specific message
about a previous operand for some other instruction/alias candidate.
(Re-committed with an extra whitespace in SVEInstrFormats.td to trigger rebuild
of AArch64GenAsmMatcher.inc, since the llvm-clang-x86_64-expensive-checks-win
builder does not seem to rebuild AArch64GenAsmMatcher.inc with the
newly built TableGen due to a missing dependency somewhere (see:
http://lists.llvm.org/pipermail/llvm-dev/2017-December/119555.html))
Reviewers: craig.topper, olista01, rengolin, stoklund
Reviewed By: olista01
Subscribers: javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D40011
llvm-svn: 320711
As part of the unification of the debug format and the MIR format, print
MBB references as '%bb.5'.
The MIR printer prints the IR name of a MBB only for block definitions.
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)->getNumber\(\)/" << printMBBReference(*\1)/g'
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)\.getNumber\(\)/" << printMBBReference(\1)/g'
* find . \( -name "*.txt" -o -name "*.s" -o -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#([0-9]+)/%bb.\1/g'
* grep -nr 'BB#' and fix
Differential Revision: https://reviews.llvm.org/D40422
llvm-svn: 319665
Summary:
The generated diagnostic by the AsmMatcher isn't always applicable to the AsmOperand.
This is because the code will only update the diagnostic if it is more specific than the previous diagnostic. However, when having validated operands and 'moved on' to a next operand (for some instruction/alias for which all previous operands are valid), if the diagnostic is InvalidOperand, than that should be set as the diagnostic, not the more specific message about a previous operand for some other instruction/alias candidate.
Reviewers: craig.topper, olista01, rengolin, stoklund
Reviewed By: olista01
Subscribers: javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D40011
llvm-svn: 318759
Summary:
This patch fixes an issue so that the right alias is printed when the instruction has tied operands. It checks the number of operands in the resulting instruction as opposed to the alias, and then skips over tied operands that should not be printed in the alias.
This allows to generate the preferred assembly syntax for the AArch64 'ins' instruction, which should always be displayed as 'mov' according to the ARM Architecture Reference Manual. Several unit tests have changed as a result, but only to reflect the preferred disassembly. Some other InstAlias patterns (movk/bic/orr) needed a slight adjustment to stop them becoming the default and breaking other unit tests.
Please note that the patch is mostly the same as https://reviews.llvm.org/D29219 which was reverted because of an issue found when running TableGen with the Address Sanitizer. That issue has been addressed in this iteration of the patch.
Reviewers: rengolin, stoklund, huntergr, SjoerdMeijer, rovka
Reviewed By: rengolin, SjoerdMeijer
Subscribers: fhahn, aemerson, javed.absar, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D40030
llvm-svn: 318650
Summary:
Prevent an issue where a diagnostic is reported multiple times by bailing out with a ParseFail if an invalid SVE register element qualifier/suffix is specified, for example:
<stdin>:10:18: error: invalid sve vector kind qualifier
add z20.h, z2.h, z31.x
^
<stdin>:10:18: error: invalid sve vector kind qualifier
add z20.h, z2.h, z31.x
...
<stdin>:10:18: error: invalid sve vector kind qualifier
add z20.h, z2.h, z31.x
^
Reviewers: fhahn, rengolin
Reviewed By: rengolin
Subscribers: aemerson, javed.absar, tschuett, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D39894
llvm-svn: 318297
Change the test format for SVE assembler/disassembler tests to be less verbose and have both tests in the same file.
The tests check the following:
* All instructions are assembled correctly into the right encoding.
* All instructions are disassembled correctly (into the preferred assembly format)
* Without -mattr=+sve the instructions are not assembled.
* Without -mattr=+sve the instructions are not disassembled.
This patch also adds several negative tests for SVE add/sub.
Patch by Sander De Smalen.
Reviewed by: rengolin, fhahn
Differential Revision: https://reviews.llvm.org/D39792
llvm-svn: 317894
Patch [5/5] in a series to add assembler/disassembler support for AArch64 SVE unpredicated ADD/SUB instructions.
Patch by Sander De Smalen.
Reviewed by: rengolin
Differential Revision: https://reviews.llvm.org/D39091
llvm-svn: 317591
As of today we only use .cfi_offset to specify the offset of a CSR, but
we never use .cfi_restore when the CSR is restored.
If we want to perform a more advanced type of shrink-wrapping, we need
to use .cfi_restore in order to switch the CFI state between blocks.
This patch only aims at adding support for the directive.
Differential Revision: https://reviews.llvm.org/D36114
llvm-svn: 317199
This allows a DiagnosticType and/or DiagnosticString to be associated
with a RegisterClass in tablegen, so that we can emit diagnostics in the
assembler when a register operand is incorrect.
DiagnosticType creates a predictable enum value, which gets returned as
the error code when an operand does not match, and can be used by the
assembly parser to map to a user-facing diagnostic. DiagnosticString
creates an anonymous enum value (currently based on the tablegen class
name), and a function to map from enum values to strings will be
generated. Both of these work the same was as they do for AsmOperand.
This isn't used by any targets yet, but has one (positive) side-effect.
It improves the diagnostic codes returned by validateOperandClass - we
always want to emit the diagnostic that relates to the expected operand
class, but this wasn't always being done when the expected and actual
classes were completely different (token/register/custom). This causes a
few AArch64 diagnostics to be improved, as Match_InvalidOperand was
being returned instead of a specific diagnostic type.
Differential revision: https://reviews.llvm.org/D36691
llvm-svn: 315295
Add the missing hardware features the ProcA55 and ProcA75 feature.
These are already enabled via the target parser, but I had missed
them in the backend.
Differential Revision: https://reviews.llvm.org/D37974
llvm-svn: 313535
This reverts commit 6389e7aa724ea7671d096f4770f016c3d86b0d54.
There is a bug in this implementation where the string value of the
checksum is outputted, instead of the actual hex bytes. Therefore the
checksum is incorrect, and this prevent pdbs from being loaded by visual
studio. Revert this until the checksum is emitted correctly.
llvm-svn: 313431
Summary:
The checksums had already been placed in the IR, this patch allows
MCCodeView to actually write it out to an MCStreamer.
Subscribers: llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D37157
llvm-svn: 313374
New instructions are added to AArch32 and AArch64 to aid
floating-point multiplication and addition of complex numbers,
where the complex numbers are packed in a vector register as a
pair of elements. The Imaginary part of the number is placed in the
more significant element, and the Real part of the number is placed
in the less significant element.
Differential Revision: https://reviews.llvm.org/D36792
llvm-svn: 312228
The IDSAR6 system register has been introduced to identify the
v8.3-a Javascript data type conversion and v8.2-a dot product
support.
Differential Revision: https://reviews.llvm.org/D37068
llvm-svn: 312225
Armv8.3-A adds instructions that convert a double-precision floating
point number to a signed 32-bit integer with round towards zero,
designed for improving Javascript performance.
Differential Revision: https://reviews.llvm.org/D36785
llvm-svn: 311448
This allows using semicolons for bundling up more than one
statement per line. This is used within the mingw-w64 project in some
assembly files that contain code for multiple architectures.
Differential Revision: https://reviews.llvm.org/D36366
llvm-svn: 310797
Add assembler and disassembler support for the ARMv8.3-A pointer
authentication instructions.
Differential Revision: https://reviews.llvm.org/D36517
llvm-svn: 310709
Added assembler and disassembler support for the new Release
Consistent processor consistent instructions, introduced with ARM
v8.3-A for AArch64.
Differential Revision: https://reviews.llvm.org/D36522
llvm-svn: 310575
Summary:
Most CPUs implementing AES fusion require instruction pairs of the form
AESE Vn, _
AESMC Vn, Vn
and
AESD Vn, _
AESIMC Vn, Vn
The constraint is added to AES(I)MC instructions which use the result of
an AES(E|D) instruction by using AES(I)MCTrr pseudo instructions, which
constraint source and destination registers to be the same.
A nice side effect of this change is that now all possible pairs are
scheduled back-to-back on the exynos-m1 for the misched-fusion-aes.ll
test case.
I had to update aes_load_store. The version I added initially was very
reduced and with the new constraint, AESE/AESMC could not be scheduled
back-to-back. I updated the test to be more realistic and still expose
the same scheduling problem as the initial test case.
Reviewers: t.p.northover, rengolin, evandro, kristof.beyls, silviu.baranga
Reviewed By: t.p.northover, evandro
Subscribers: aemerson, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D35299
llvm-svn: 309495
In COFF, a symbol offset can't be stored in the relocation (as is
done in ELF or MachO), but is stored as the immediate in the
instruction itself. The immediate in the ADRP thus is the symbol
offset in bytes, not in pages. For the PAGEOFFSET_12A/L relocations,
ignore any offset outside of the lowest 12 bits; they won't have any
effect on the ADD/LDR/STR instruction itself but only on the associated
ADRP.
This is similar to how the same issue is handled for MOVW/MOVT
instructions in ELF (see e.g. SVN r307713, and r307728 in lld).
This fixes "fixup out of range" errors while building larger object
files, where temporary symbols end up as a plain section symbol and
an offset, and fixes any cases where the symbol offset mean that
the actual target ended up on a different page than the symbol
itself.
Differential Revision: https://reviews.llvm.org/D35791
llvm-svn: 309105
This generalizes an existing fix from ELF to MachO and COFF.
Test that an ADRP to a local symbol whose offset is known at assembly
time still produces relocations, both for MachO and COFF. Test that
an ADRP without a @page modifier on MachO fails (previously it
didn't).
Differential Revision: https://reviews.llvm.org/D35544
llvm-svn: 308518
The AsmParser mnemonic spell checker was introduced in r307148 and enabled only
for ARM. This patch enables it for AArch64.
Differential Revision: https://reviews.llvm.org/D35357
llvm-svn: 307918
Summary:
This is the llvm part of the initial implementation to support Windows ARM64 COFF format.
I will gradually add more functionality in subsequent patches.
Reviewers: ruiu, rnk, t.p.northover, compnerd
Reviewed By: ruiu, compnerd
Subscribers: aemerson, mgorny, javed.absar, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D34705
llvm-svn: 306490
The MC ConstantPool class uses a DenseMap to track generated constants, with
the int64_t value of the constant as the key. This fails when values of
0x7fffffffffffffff or 0x7ffffffffffffffe are inserted into the constant pool, as
these are sentinel values for DenseMap.
The fix is to use std::map instead, which doesn't use sentinel values.
Differential revision: https://reviews.llvm.org/D33667
llvm-svn: 304199
Re-applying now that the open bug on this commit, PR32825, is known to be fixed.
Original commit message:
Summary: This patch returns the same label if the CP entry with the same value has been created.
Reviewers: eli.friedman, rengolin, jmolloy
Subscribers: majnemer, jmolloy, llvm-commits
Differential Revision: https://reviews.llvm.org/D25804
llvm-svn: 303539
We were silently ignoring any features we couldn't match up, which led to
errors in an inline asm block missing the conventional "\n\t".
llvm-svn: 303108
We were previously silently emitting bogus data in release mode,
making it very hard to diagnose the error, or crashing with an
assert in debug mode. A proper diagnostic is now always emitted
when the value to be emitted is out of range.
llvm-svn: 303041
That's only a required extension as of v8.1a.
Remove it from the "generic" CPU as well: it should only support the
base ISA (and binutils agrees).
Also unify the MC tests into crc.s and arm64-crc32.s
llvm-svn: 302077
Remove "_NC" suffix and semantics from TLSDESC_LD{64,32}_LO12 and
TLSDESC_ADD_LO12 relocations
Rearrange ordering in AArch64.def to follow relocation encoding
Fix name:
R_AARCH64_P32_LD64_GOT_LO12_NC => R_AARCH64_P32_LD32_GOT_LO12_NC
Add support for several "TLS", "TLSGD", and "TLSLD" relocations for
ILP32
Fix return values from isNonILP32reloc
Add implementations for
R_AARCH64_ADR_PREL_PG_HI21_NC, R_AARCH64_P32_LD32_GOT_LO12_NC,
R_AARCH64_P32_TLSIE_LD32_GOTTPREL_LO12_NC,
R_AARCH64_P32_TLSDESC_LD32_LO12, R_AARCH64_LD64_GOT_LO12_NC,
*TLSLD_LDST128_DTPREL_LO12, *TLSLD_LDST128_DTPREL_LO12_NC,
*TLSLE_LDST128_TPREL_LO12, *TLSLE_LDST128_TPREL_LO12_NC
Modify error messages to give name of equivalent relocation in the
ABI not being used, along with better checking for non-existent
requested relocations.
Added assembler support for "pg_hi21_nc"
Relocation definitions added without implementations:
R_AARCH64_P32_TLSDESC_ADR_PREL21, R_AARCH64_P32_TLSGD_ADR_PREL21,
R_AARCH64_P32_TLSGD_ADD_LO12_NC, R_AARCH64_P32_TLSLD_ADR_PREL21,
R_AARCH64_P32_TLSLD_ADR_PAGE21, R_AARCH64_P32_TLSLD_ADD_LO12_NC,
R_AARCH64_P32_TLSLD_LD_PREL19, R_AARCH64_P32_TLSDESC_LD_PREL19,
R_AARCH64_P32_TLSGD_ADR_PAGE21, R_AARCH64_P32_TLS_DTPREL,
R_AARCH64_P32_TLS_DTPMOD, R_AARCH64_P32_TLS_TPREL,
R_AARCH64_P32_TLSDESC
Fix encoding:
R_AARCH64_P32_TLSDESC_ADR_PAGE21
Reviewers: Peter Smith
Patch by: Joel Jones (jjones@cavium.com)
Differential Revision: https://reviews.llvm.org/D32072
llvm-svn: 301980
TLSDESC_ADD_LO12 relocations
Rearrange ordering in AArch64.def to follow relocation encoding
Fix name:
R_AARCH64_P32_LD64_GOT_LO12_NC => R_AARCH64_P32_LD32_GOT_LO12_NC
Add support for several "TLS", "TLSGD", and "TLSLD" relocations for
ILP32
Fix return values from isNonILP32reloc
Add implementations for
R_AARCH64_ADR_PREL_PG_HI21_NC, R_AARCH64_P32_LD32_GOT_LO12_NC,
R_AARCH64_P32_TLSIE_LD32_GOTTPREL_LO12_NC,
R_AARCH64_P32_TLSDESC_LD32_LO12, R_AARCH64_LD64_GOT_LO12_NC,
*TLSLD_LDST128_DTPREL_LO12, *TLSLD_LDST128_DTPREL_LO12_NC,
*TLSLE_LDST128_TPREL_LO12, *TLSLE_LDST128_TPREL_LO12_NC
Modify error messages to give name of equivalent relocation in the
ABI not being used, along with better checking for non-existent
requested relocations.
Added assembler support for "pg_hi21_nc"
Relocation definitions added without implementations:
R_AARCH64_P32_TLSDESC_ADR_PREL21, R_AARCH64_P32_TLSGD_ADR_PREL21,
R_AARCH64_P32_TLSGD_ADD_LO12_NC, R_AARCH64_P32_TLSLD_ADR_PREL21,
R_AARCH64_P32_TLSLD_ADR_PAGE21, R_AARCH64_P32_TLSLD_ADD_LO12_NC,
R_AARCH64_P32_TLSLD_LD_PREL19, R_AARCH64_P32_TLSDESC_LD_PREL19,
R_AARCH64_P32_TLSGD_ADR_PAGE21, R_AARCH64_P32_TLS_DTPREL,
R_AARCH64_P32_TLS_DTPMOD, R_AARCH64_P32_TLS_TPREL,
R_AARCH64_P32_TLSDESC
Fix encoding:
R_AARCH64_P32_TLSDESC_ADR_PAGE21
Reviewers: Peter Smith
Patch by: Joel Jones (jjones@cavium.com)
Differential Revision: https://reviews.llvm.org/D32072
llvm-svn: 301939
r288279 mistakenly added it to all arches, but it's only available
from v8.1 onwards.
The testcase is awkward, because (I suspect) of PR32873.
Spotted by inspection.
llvm-svn: 301890
Instruction isb takes as an operand either 'sy' or an immediate value. This
improves the diagnostic when the string is not 'sy' and adds a test case for
this which was missing. This also adds tests to check invalid inputs for dsb
and dmb.
Differential Revision: https://reviews.llvm.org/D32227
llvm-svn: 301165
Currently fmov #0 with a vector destination is handle incorrectly and results in
fmov #-1.9375 being emitted but should instead give an error. This is due to the
way we cope with fmov #0 with a scalar destination being an alias of fmov zr, so
fix this by actually doing it through an alias.
Differential Revision: https://reviews.llvm.org/D31949
llvm-svn: 300830
When an integer is used as an fp immediate we're failing to check the return
value of getFP64Imm, so invalid values are silently permitted. Fix this by
merging together the integer and real handling.
llvm-svn: 300828
Summary:
Similar to the ARM target in https://reviews.llvm.org/rL298380, this
patch adds identical infrastructure for disabling negative immediate
conversions, and converts the existing aliases to the new infrastucture.
Reviewers: rengolin, javed.absar, olista01, SjoerdMeijer, samparker
Reviewed By: samparker
Subscribers: samparker, aemerson, llvm-commits
Differential Revision: https://reviews.llvm.org/D31243
llvm-svn: 298908
Summary:
This is a continuation of D28861. Add an SMLoc to MCUnaryExpr such that
a better diagnostic can be given in case of an error in later stages of
assembling.
Reviewers: rengolin, grosbach, javed.absar, olista01
Reviewed By: olista01
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D30581
llvm-svn: 297454
This set of patches adds support for Cavium ThunderX ARM64 processors:
* ThunderX
* ThunderX T81
* ThunderX T83
* ThunderX T88
Patch by Stefan Teleman
Differential Revision: https://reviews.llvm.org/D28891
llvm-svn: 295475
Regression test neon-diagnostics.s needed changing because it now
produces a more specific diagnostic about the immediate ranges. One
change in the expected error message is not obvious, but there multiple
candidate and it happens to pick the immediate diagnostic.
Differential Revision: https://reviews.llvm.org/D29939
llvm-svn: 295331
