The original patch of the A->B->A BitCast optimization was reverted by r274094 because it may cause infinite loop inside compiler https://llvm.org/bugs/show_bug.cgi?id=27996.
The problem is with following code
xB = load (type B);
xA = load (type A);
+yA = (A)xB; B -> A
+zAn = PHI[yA, xA]; PHI
+zBn = (B)zAn; // A -> B
store zAn;
store zBn;
optimizeBitCastFromPhi generates
+zBn = (B)zAn; // A -> B
and expects it will be combined with the following store instruction to another
store zAn
Unfortunately before combineStoreToValueType is called on the store instruction, optimizeBitCastFromPhi is called on the new BitCast again, and this pattern repeats indefinitely.
optimizeBitCastFromPhi only generates BitCast for load/store instructions, only the BitCast before store can cause the reexecution of optimizeBitCastFromPhi, and BitCast before store can easily be handled by InstCombineLoadStoreAlloca.cpp. So the solution to the problem is if all users of a CI are store instructions, we should not do optimizeBitCastFromPhi on it. Then optimizeBitCastFromPhi will not be called on the new BitCast instructions.
Differential Revision: https://reviews.llvm.org/D23896
llvm-svn: 285116
This test was apparently checking for 2 independent folds, but we have
plenty of tests for those individual folds already. We are lacking
vector tests, however, because we don't have the shift folds for vectors.
llvm-svn: 284243
Prefer add/zext because they are better supported in terms of value-tracking.
Note that the backend should be prepared for this IR canonicalization
(including vector types) after:
https://reviews.llvm.org/rL284015
Differential Revision: https://reviews.llvm.org/D25135
llvm-svn: 284241
As discussed by Andrea on PR30486, we have an unsafe cast to an Instruction type in the select combine which doesn't take into account that it could be a ConstantExpr instead.
Differential Revision: https://reviews.llvm.org/D25466
llvm-svn: 284000
When combining an integer load with !range metadata that does not include 0 to a pointer load, make sure emit !nonnull metadata on the newly-created pointer load. This prevents the !nonnull metadata from being dropped during a ptrtoint/inttoptr pair.
This fixes PR30597.
Patch by Ariel Ben-Yehuda!
Differential Revision: https://reviews.llvm.org/D25215
llvm-svn: 283836
If we're going to canonicalize IR towards select of constants, try harder to create those.
Also, don't lose the metadata.
This is actually 4 related transforms in one patch:
// select X, (sext X), C --> select X, -1, C
// select X, (zext X), C --> select X, 1, C
// select X, C, (sext X) --> select X, C, 0
// select X, C, (zext X) --> select X, C, 0
Differential Revision: https://reviews.llvm.org/D25126
llvm-svn: 283575
Also, remove unnecessary function attributes, parameters, and comments.
It looks like at least some of these tests are not minimal though...
llvm-svn: 282620
The index of the new insertelement instruction was evaluated in the
wrong way, it was considered as the index of the inserted value instead
of index of the position, where the value should be inserted.
llvm-svn: 282401
This patch fixes PR30366.
Function foldUDivShl() worked under the assumption that one of the values
in input to the function was always an instance of llvm::Instruction.
However, function visitUDivOperand() (the only user of foldUDivShl) was
clearly violating that precondition; internally, visitUDivOperand() uses pattern
matches to check the operands of a udiv. Pattern matchers for binary operators
know how to handle both Instruction and ConstantExpr values.
This patch fixes the problem in foldUDivShl(). Now we use pattern matchers
instead of explicit casts to Instruction. The reduced test case from PR30366
has been added to test file InstCombine/udiv-simplify.ll.
Differential Revision: https://reviews.llvm.org/D24565
llvm-svn: 282398
If inserting more than one constant into a vector:
define <4 x float> @foo(<4 x float> %x) {
%ins1 = insertelement <4 x float> %x, float 1.0, i32 1
%ins2 = insertelement <4 x float> %ins1, float 2.0, i32 2
ret <4 x float> %ins2
}
InstCombine could reduce that to a shufflevector:
define <4 x float> @goo(<4 x float> %x) {
%shuf = shufflevector <4 x float> %x, <4 x float> <float undef, float 1.0, float 2.0, float undef>, <4 x i32><i32 0, i32 5, i32 6, i32 3>
ret <4 x float> %shuf
}
Also, InstCombine tries to convert shuffle instruction to single insertelement, if one of the vectors is a constant vector and only a single element from this constant should be used in shuffle, i.e.
shufflevector <4 x float> %v, <4 x float> <float undef, float 1.0, float
undef, float undef>, <4 x i32> <i32 0, i32 5, i32 undef, i32 undef> ->
insertelement <4 x float> %v, float 1.0, 1
Differential Revision: https://reviews.llvm.org/D24182
llvm-svn: 282237
We already have the udiv variant of this transform, so I think this is ok for
InstCombine too even though there is an increase in IR instructions. As the
tests and TODO comments show, the transform can lead to follow-on combines.
This should fix: https://llvm.org/bugs/show_bug.cgi?id=28672
Differential Revision: https://reviews.llvm.org/D24527
llvm-svn: 282209
computeKnownBits() already works for integer vectors, so allow vector types when calling that from InstCombine.
I don't think the change to use m_APInt in computeKnownBits is strictly necessary because we do check for
ConstantVector later, but it's more efficient to handle the splat case without needing to loop on vector elements.
This should work with InstSimplify, but doesn't yet, so I made that a FIXME comment on the test for PR24942:
https://llvm.org/bugs/show_bug.cgi?id=24942
Differential Revision: https://reviews.llvm.org/D24677
llvm-svn: 281777
These 2 helper functions were already using APInt internally, so just
change the API and caller to allow folds for splats. The scalar
regression tests look quite thorough, so I just added a couple of
tests to prove that vectors are handled too.
These folds should be grouped with the other cmp+shift folds though.
That can be an NFC follow-up.
llvm-svn: 281663
The constant folder didn't know how to always fold bitcasts of constant integer
vectors. In particular, it was unable to handle the case where a constant vector
had some undef elements, and the resulting (i.e. bitcasted) vector type had more
elements than the original vector type.
Example:
%cast = bitcast <2 x i64><i64 undef, i64 2> to <4 x i32>
On a little endian target, %cast could have been folded to:
<4 x i32><i32 undef, i32 undef, i32 2, i32 0>
This patch improves the folding logic by teaching how to correctly propagate
undef elements in the folded vector.
Differential Revision: https://reviews.llvm.org/D24301
llvm-svn: 281343
Teach SimplifyLibcalls that in can treat functions annotated with
apcs, aapcs or aapcs_vfp like normal C functions if they only take
and return integer or pointer values, and the target is not iOS.
Differential Revision: https://reviews.llvm.org/D24453
llvm-svn: 281322
I was looking to fix a bug in getComplexity(), and these cases showed up as
obvious failures. I'm not sure how to find these in general though.
llvm-svn: 281055
This is a revert of r280676 which was a revert of r280637;
ie, this is r280637 again. It was speculatively reverted to
help debug buildbot failures.
llvm-svn: 280861
This fixes a similar issue to the one already fixed by r280804
(revieved in D24256). Revision 280804 fixed the problem with unsafe dyn_casts
in the extrq/extrqi combining logic. However, it turns out that even the
insertq/insertqi logic was affected by the same problem.
llvm-svn: 280807
This patch fixes an assertion failure caused by unsafe dynamic casts on the
constant operands of sse4a intrinsic calls to extrq/extrqi
The combine logic that simplifies sse4a extrq/extrqi intrinsic calls currently
checks if the input operands are constants. Internally, that logic relies on
dyn_casts of values returned by calls to method Constant::getAggregateElement.
However, method getAggregateElemet may return nullptr if the constant element
cannot be retrieved. So, all the dyn_casts can potentially fail. This is what
happens for example if a constexpr value is passed in input to an extrq/extrqi
intrinsic call.
This patch fixes the problem by using a dyn_cast_or_null (instead of a simple
dyn_cast) on the result of each call to Constant::getAggregateElement.
Added reproducible test cases to x86-sse4a.ll.
Differential Revision: https://reviews.llvm.org/D24256
llvm-svn: 280804
memcpy with ld/st.
When InstCombine replaces a memcpy with loads+stores it does not copy over the
llvm.mem.parallel_loop_access from the memcpy instruction. This patch fixes
that.
Differential Revision: https://reviews.llvm.org/D23499
llvm-svn: 280617
For the store of a wide value merged from a pair of values, especially int-fp pair,
sometimes it is more efficent to split it into separate narrow stores, which can
remove the bitwise instructions or sink them to colder places.
Now the feature is only enabled on x86 target, and only store of int-fp pair is
splitted. It is possible that the application scope gets extended with perf evidence
support in the future.
Differential Revision: https://reviews.llvm.org/D22840
llvm-svn: 280505
The motivating case occurs with SSE/AVX scalar intrinsics, so this is a first step towards
shrinking that to a single shufflevector.
Note that the transform is intentionally limited to shuffles that are equivalent to vector
selects to avoid creating arbitrary shuffle masks that may not lower well.
This should solve PR29126:
https://llvm.org/bugs/show_bug.cgi?id=29126
Differential Revision: https://reviews.llvm.org/D23886
llvm-svn: 280504
While removing a scalar shackle from an icmp fold, I noticed that I couldn't find any tests to trigger
this code path.
The 'and' shrinking transform should be handled by InstCombiner::foldCastedBitwiseLogic()
or eliminated with InstSimplify. The icmp narrowing is part of InstCombiner::foldICmpWithCastAndCast().
Differential Revision: https://reviews.llvm.org/D24031
llvm-svn: 280370
Summary: We can allow sinking if the single user block has only one unique predecessor, regardless of the number of edges. Note that a switch statement with multiple cases can have the same destination.
Reviewers: mcrosier, majnemer, spatel, reames
Subscribers: reames, mcrosier, llvm-commits
Differential Revision: https://reviews.llvm.org/D23722
llvm-svn: 279448
This is a partial enablement (move the ConstantInt guard down) because there are many
different folds here and one of the later ones will require reworking 'isSignBitCheck'.
llvm-svn: 279339
The intended transform is:
// Simplify icmp eq (or (ptrtoint P), (ptrtoint Q)), 0
// -> and (icmp eq P, null), (icmp eq Q, null).
P and Q are both pointer types, but may have different types. We need
two calls to getNullValue() to make the icmps.
llvm-svn: 279271
Of course, we really need to refactor and fix all of the cmp predicates,
but this one is interesting because without it, we later perform an
information-losing transform of icmp (shl 1, Y), C, and we can't recover
the better fold.
llvm-svn: 279263
Also, add a scalar test to demonstrate one of the intermediate folds that
is necessary to accomplish the existing, multi-step test. And simplify
the vector tests to only check the final piece of that multi-step transform.
llvm-svn: 278995
I have audited all the callers of concatenate and none require duplicate
entries to service concatenation.
These duplicates serve no purpose but to needlessly embiggen the IR.
N.B. Layering getMostGenericAliasScope on top of concatenate makes it
O(nlogn + mlogm) instead of O(n*m).
llvm-svn: 278836
Hal pointed out that the semantic of our intrinsic and the libc
call are slightly different. Add a comment while I'm here to
explain why we can't emit an intrinsic. Thanks Hal!
llvm-svn: 278200
Summary:
Turn (select C, (sext A), B) into (sext (select C, A, B')) when A is i1 and
B is a compatible constant, also for zext instead of sext. This will then be
further folded into logical operations.
The transformation would be valid for non-i1 types as well, but other parts of
InstCombine prefer to have sext from non-i1 as an operand of select.
Motivated by the shader compiler frontend in Mesa for AMDGPU, which emits i32
for boolean operations. With this change, the boolean logic is fully
recovered.
Reviewers: majnemer, spatel, tstellarAMD
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D22747
llvm-svn: 277801
Summary:
InstCombine unfolds expressions of the form `zext(or(icmp, icmp))` to `or(zext(icmp), zext(icmp))` such that in a later iteration of InstCombine the exposed `zext(icmp)` instructions can be optimized. We now combine this unfolding and the subsequent `zext(icmp)` optimization to be performed together. Since the unfolding doesn't happen separately anymore, we also again enable the folding of `logic(cast(icmp), cast(icmp))` expressions to `cast(logic(icmp, icmp))` which had been disabled due to its interference with the unfolding transformation.
Tested via `make check` and `lnt`.
Background
==========
For a better understanding on how it came to this change we subsequently summarize its history. In commit r275989 we've already tried to enable the folding of `logic(cast(icmp), cast(icmp))` to `cast(logic(icmp, icmp))` which had to be reverted in r276106 because it could lead to an endless loop in InstCombine (also see http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20160718/374347.html). The root of this problem is that in `visitZExt()` in InstCombineCasts.cpp there also exists a reverse of the above folding transformation, that unfolds `zext(or(icmp, icmp))` to `or(zext(icmp), zext(icmp))` in order to expose `zext(icmp)` operations which would then possibly be eliminated by subsequent iterations of InstCombine. However, before these `zext(icmp)` would be eliminated the folding from r275989 could kick in and cause InstCombine to endlessly switch back and forth between the folding and the unfolding transformation. This is the reason why we now combine the `zext`-unfolding and the elimination of the exposed `zext(icmp)` to happen at one go because this enables us to still allow the cast-folding in `logic(cast(icmp), cast(icmp))` without entering an endless loop again.
Details on the submitted changes
================================
- In `visitZExt()` we combine the unfolding and optimization of `zext` instructions.
- In `transformZExtICmp()` we have to use `Builder->CreateIntCast()` instead of `CastInst::CreateIntegerCast()` to make sure that the new `CastInst` is inserted in a `BasicBlock`. The new calls to `transformZExtICmp()` that we introduce in `visitZExt()` would otherwise cause according assertions to be triggered (in our case this happend, for example, with lnt for the MultiSource/Applications/sqlite3 and SingleSource/Regression/C++/EH/recursive-throw tests). The subsequent usage of `replaceInstUsesWith()` is necessary to ensure that the new `CastInst` replaces the `ZExtInst` accordingly.
- In InstCombineAndOrXor.cpp we again allow the folding of casts on `icmp` instructions.
- The instruction order in the optimized IR for the zext-or-icmp.ll test case is different with the introduced changes.
- The test cases in zext.ll have been adopted from the reverted commits r275989 and r276105.
Reviewers: grosser, majnemer, spatel
Subscribers: eli.friedman, majnemer, llvm-commits
Differential Revision: https://reviews.llvm.org/D22864
Contributed-by: Matthias Reisinger <d412vv1n@gmail.com>
llvm-svn: 277635
This removes the restriction for the icmp constant, but as noted by the FIXME comments,
we still need to change individual checks for binop operand constants.
llvm-svn: 277629
An undef vector element can be treated as if it had any value. Folding
such a vector element to 0 in a bitcast can open up further folding
opportunities.
llvm-svn: 277104
ConstantExpr::getWithOperands does much of the hard work that
ConstantFoldInstOperandsImpl tries to do but more completely.
This lets us fold ExtractValue/InsertValue expressions.
llvm-svn: 277100
A ConstantVector can have ConstantExpr operands and vice versa.
However, the folder had no ability to fold ConstantVectors which, in
some cases, was an optimization barrier.
Instead, rephrase the folder in terms of Constants instead of
ConstantExprs and teach callers how to deal with failure.
llvm-svn: 277099
Summary:
Asan stack-use-after-scope check should poison alloca even if there is
no access between start and end.
This is possible for code like this:
for (int i = 0; i < 3; i++) {
int x;
p = &x;
}
"Loop Invariant Code Motion" will move "p = &x;" out of the loop, making
start/end range empty.
PR27453
Reviewers: eugenis
Differential Revision: https://reviews.llvm.org/D22842
llvm-svn: 277072
Summary:
Asan stack-use-after-scope check should poison alloca even if there is
no access between start and end.
This is possible for code like this:
for (int i = 0; i < 3; i++) {
int x;
p = &x;
}
"Loop Invariant Code Motion" will move "p = &x;" out of the loop, making
start/end range empty.
PR27453
Reviewers: eugenis
Differential Revision: https://reviews.llvm.org/D22842
llvm-svn: 277068