This enables proper lowering of non-byte sized loads. We still aren't
faithfully preserving memory types everywhere, so the legality checks
still only consider the size.
This will currently accept the old number of bytes syntax, and convert
it to a scalar. This should be removed in the near future (I think I
converted all of the tests already, but likely missed a few).
Not sure what the exact syntax and policy should be. We can continue
printing the number of bytes for non-generic instructions to avoid
test churn and only allow non-scalar types for generic instructions.
This will currently print the LLT in parentheses, but accept parsing
the existing integers and implicitly converting to scalar. The
parentheses are a bit ugly, but the parser logic seems unable to deal
without either parentheses or some keyword to indicate the start of a
type.
These tests contain debug instructions which get checked, so we can't
insert synthetic debug info and expect the tests to pass.
The rest of the ARM backend tests appear to be fair game.
Summary:
G_GEP is rather poorly named. It's a simple pointer+scalar addition and
doesn't support any of the complexities of getelementptr. I therefore
propose that we rename it. There's a G_PTR_MASK so let's follow that
convention and go with G_PTR_ADD
Reviewers: volkan, aditya_nandakumar, bogner, rovka, arsenm
Subscribers: sdardis, jvesely, wdng, nhaehnle, hiraditya, jrtc27, atanasyan, arphaman, Petar.Avramovic, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69734
A number of of tests were using imm operands, not cimm. Since CSE
relies on the exact ConstantInt* pointer used, and implicit
conversions are generally evil, also enforce the bitsize of the types.
llvm-svn: 353113
We can now select CLZ via the TableGen'erated code, so support G_CTLZ
and G_CTLZ_ZERO_UNDEF throughout the pipeline for types <= s32.
Legalizer:
If the CLZ instruction is available, use it for both G_CTLZ and
G_CTLZ_ZERO_UNDEF. Otherwise, use a libcall for G_CTLZ_ZERO_UNDEF and
lower G_CTLZ in terms of it.
In order to achieve this we need to add support to the LegalizerHelper
for the legalization of G_CTLZ_ZERO_UNDEF for s32 as a libcall (__clzsi2).
We also need to allow lowering of G_CTLZ in terms of G_CTLZ_ZERO_UNDEF
if that is supported as a libcall, as opposed to just if it is Legal or
Custom. Due to a minor refactoring of the helper function in charge of
this, we will also allow the same behaviour for G_CTTZ and G_CTPOP.
This is not going to be a problem in practice since we don't yet have
support for treating G_CTTZ and G_CTPOP as libcalls (not even in
DAGISel).
Reg bank select:
Map G_CTLZ to GPR. G_CTLZ_ZERO_UNDEF should not make it to this point.
Instruction select:
Nothing to do.
llvm-svn: 347545
As Roman Tereshin pointed out in https://reviews.llvm.org/D45541, the
-global-isel option is redundant when -run-pass is given. -global-isel sets up
the GlobalISel passes in the pass manager but -run-pass skips that entirely and
configures it's own pipeline.
llvm-svn: 331603
Discussed here:
http://lists.llvm.org/pipermail/llvm-dev/2018-January/120320.html
In preparation for adding support for named vregs we are changing the sigil for
physical registers in MIR to '$' from '%'. This will prevent name clashes of
named physical register with named vregs.
llvm-svn: 323922
We get an assertion in RegBankSelect for code along the lines of
my_32_bit_int = my_64_bit_int, which tends to translate into a 64-bit
load, followed by a G_TRUNC, followed by a 32-bit store. This appears in
a couple of places in the test-suite.
At the moment, the legalizer doesn't distinguish between integer and
floating point scalars, so a 64-bit load will be marked as legal for
targets with VFP, and so will the rest of the sequence, leading to a
slightly bizarre G_TRUNC reaching RegBankSelect.
Since the current support for 64-bit integers is rather immature, this
patch works around the issue by explicitly handling this case in
RegBankSelect and InstructionSelect. In the future, we may want to
revisit this decision and make sure 64-bit integer loads are narrowed
before reaching RegBankSelect.
llvm-svn: 321165
output
As part of the unification of the debug format and the MIR format,
always use `printReg` to print all kinds of registers.
Updated the tests using '_' instead of '%noreg' until we decide which
one we want to be the default one.
Differential Revision: https://reviews.llvm.org/D40421
llvm-svn: 319445
TableGen already generates code for selecting a G_FDIV, so we only need
to add a test.
For the legalizer and reg bank select, we do the same thing as for the
other floating point binary operations: either mark as legal if we have
a FP unit or lower to a libcall, and map to the floating point
registers.
llvm-svn: 318915
TableGen already generates code for selecting a G_FMUL, so we only need
to add a test for that part.
For the legalizer and reg bank select, we do the same thing as the other
floating point binary operators: either mark as legal if we have a FP
unit or lower to a libcall, and map to the floating point registers.
llvm-svn: 318910
This is in preparation for a verifier check that makes sure
copies are of the same size (when generic virtual registers are involved).
llvm-svn: 316388
Insert a TSTri to set the flags and a Bcc to branch based on their
values. This is a bit inefficient in the (common) cases where the
condition for the branch comes from a compare right before the branch,
since we set the flags both as part of the compare lowering and as part
of the branch lowering. We're going to live with that until we settle on
a principled way to handle this kind of situation, which occurs with
other patterns as well (combines might be the way forward here).
llvm-svn: 308009
This boils down to not crashing in reg bank select due to the lack of
register operands on this instruction, and adding some tests. The
instruction selection is already covered by the TableGen'erated code.
llvm-svn: 307904
* Mark as legal for (s32, i1, s32, s32)
* Map everything into GPRs
* Select to two instructions: a CMP of the condition against 0, to set
the flags, and a MOVCCr to select between the two inputs based on the
flags that we've just set
llvm-svn: 306382
Add support throughout the pipeline:
- mark as legal for s32 and pointers
- map to GPRs
- lower to a sequence of instructions, which moves 0 or 1 into the
result register based on the flags set by a CMPrr
We have copied from FastISel a helper function which maps CmpInst
predicates into ARMCC codes. Ideally, we should be able to move it
somewhere that both FastISel and GlobalISel can use.
llvm-svn: 305672
According to the commit message from r296921, G_MERGE_VALUES and
G_INSERT are to be preferred over G_SEQUENCE. Therefore, stop generating
G_SEQUENCE in the ARM backend and remove the code dealing with it.
This boils down to the code breaking up double values for the soft float
calling convention. Use G_MERGE_VALUES + G_UNMERGE_VALUES instead of
G_SEQUENCE + G_EXTRACT for it. This maps very nicely to VMOVDRR +
VMOVRRD and simplifies the code in the instruction selector.
There's one occurence of G_SEQUENCE left in arm-irtranslator.ll, but
that is part of the target-independent code for translating constant
structs. Therefore, it is beyond the scope of this commit.
llvm-svn: 304902
This is identical to the support for the other binary operators:
- widen to s32
- map into GPR
- select ANDrr (via TableGen'erated code)
llvm-svn: 304885
If -simplify-mir option is passed then MIRPrinter will not print such fields.
This change also required some lit test cases in CodeGen directory to be changed.
Reviewed By: MatzeB
Differential Revision: https://reviews.llvm.org/D32304
llvm-svn: 304779
This is the same as r292827 for AArch64: we widen 8- and 16-bit ADD, SUB
and MUL to 32 bits since we only have TableGen patterns for 32 bits.
See the commit message for r292827 for more details.
At this point we could just remove some of the tests for regbankselect
and instruction-select, since we're not going to see any narrow
operations at those levels anymore. Instead I decided to update them
with G_ANYEXT/G_TRUNC operations, so we can validate the full sequences
generated by the legalizer.
llvm-svn: 302782
G_ANYEXT can be introduced by the legalizer when widening scalars. Add
support for it in the register bank info (same mapping as everything
else) and in the instruction selector.
When selecting it, we treat it as a COPY, just like G_TRUNC. On this
occasion we get rid of some assertions in selectCopy so we can reuse it.
This shouldn't be a problem at the moment since we're not supporting any
complicated cases (e.g. FPR, different register banks). We might want to
separate the paths when we do.
llvm-svn: 302778
Add support for both targets with hardware division and without. For
hardware division we have to add support throughout the pipeline
(legalizer, reg bank select, instruction select). For targets without
hardware division, we only need to mark it as a libcall.
llvm-svn: 301164
Select them as copies. We only select if both the source and the
destination are on the same register bank, so this shouldn't cause any
trouble.
llvm-svn: 300971
Support G_MUL, very similar to G_ADD and G_SUB. The only difference is
in the instruction selector, where we have to select either MUL or MULv5
depending on the target.
llvm-svn: 300665
We used to hit an unreachable in getRegBankFromRegClass when dealing with the
stack pointer. This commit adds support for the GPRsp reg class.
llvm-svn: 297621
A bit more painful than G_INSERT because it was more widely used, but this
should simplify the handling of extract operations in most locations.
llvm-svn: 297100
