PowerPC assembly code in the wild, so it seems, has things like this:
bc+ 12, 28, .L9
This is a bit odd because the '+' here becomes part of the BO field, and the BO
field is otherwise the first operand. Nevertheless, the ISA specification does
clearly say that the +- hint syntax applies to all conditional-branch mnemonics
(that test either CTR or a condition register, although not the forms which
check both), both basic and extended, so this is supposed to be valid.
This introduces some asm-parser-only definitions which take only the upper
three bits from the specified BO value, and the lower two bits are implied by
the +- suffix (via some associated aliases).
Fixes PR23646.
llvm-svn: 280571
dcbf has an optional hint-like field, add support for the extended form and the
associated mnemonics (dcbfl and dcbflp).
Partially fixes PR24796.
llvm-svn: 280559
This was a real restriction in the original version of SinkIfThenCodeToEnd. Now it's been rewritten, the restriction can be lifted.
As part of this, we handle a very common and useful case where one of the incoming branches is actually conditional. Consider:
if (a)
x(1);
else if (b)
x(2);
This produces the following CFG:
[if]
/ \
[x(1)] [if]
| | \
| | \
| [x(2)] |
\ | /
[ end ]
[end] has two unconditional predecessor arcs and one conditional. The conditional refers to the implicit empty 'else' arc. This same pattern can also be caused by an empty default block in a switch.
We can't sink the call to x() down to end because no call to x() happens on the third incoming arc (assume that x() has sideeffects for the sake of argument; if something is safe to speculate we could indeed sink nevertheless but this cannot happen in the general case and causes many extra selects).
We are now able to detect this case and split off the unconditional arcs to a common successor:
[if]
/ \
[x(1)] [if]
| | \
| | \
| [x(2)] |
\ / |
[sink.split] |
\ /
[ end ]
Now we can sink the call to x() into %sink.split. This can cause significant code simplification in many testcases.
llvm-svn: 280364
This was a real restriction in the original version of SinkIfThenCodeToEnd. Now it's been rewritten, the restriction can be lifted.
As part of this, we handle a very common and useful case where one of the incoming branches is actually conditional. Consider:
if (a)
x(1);
else if (b)
x(2);
This produces the following CFG:
[if]
/ \
[x(1)] [if]
| | \
| | \
| [x(2)] |
\ | /
[ end ]
[end] has two unconditional predecessor arcs and one conditional. The conditional refers to the implicit empty 'else' arc. This same pattern can also be caused by an empty default block in a switch.
We can't sink the call to x() down to end because no call to x() happens on the third incoming arc (assume that x() has sideeffects for the sake of argument; if something is safe to speculate we could indeed sink nevertheless but this cannot happen in the general case and causes many extra selects).
We are now able to detect this case and split off the unconditional arcs to a common successor:
[if]
/ \
[x(1)] [if]
| | \
| | \
| [x(2)] |
\ / |
[sink.split] |
\ /
[ end ]
Now we can sink the call to x() into %sink.split. This can cause significant code simplification in many testcases.
llvm-svn: 280217
Its existence is largely historical, apparently we tried to make ARM object
files look maybe-almost-possibly runnable by putting our best guess at the
actual value into relocated locations. Of course, the real linker then comes
along and can completely change things.
But it should only be there for word-sized and movw/movt relocations. It can't
be encoded in branch relocations, and I've seen it mess up validity
calculations twice in the last couple of weeks so the default is clearly problematic.
llvm-svn: 279773
A branch-distance to a Thumb function shouldn't be forced to be odd for
CBZ/CBNZ instructions because (assuming it's within range), it's going to be a
valid, even offset.
llvm-svn: 279665
While these directives are mostly aliases for the existing integer
and float value directives, some of them like .dc.a have no direct
equivalents and are sometimes being used for convenience.
Differential Revision: https://reviews.llvm.org/D23810
llvm-svn: 279577
Assembler directives .dtprelword, .dtpreldword, .tprelword, and
.tpreldword generates relocations R_MIPS_TLS_DTPREL32, R_MIPS_TLS_DTPREL64,
R_MIPS_TLS_TPREL32, and R_MIPS_TLS_TPREL64 respectively.
The main motivation for this patch is to be able to write test cases
for checking correctness of the LLD linker's behaviour.
Differential Revision: https://reviews.llvm.org/D23669
llvm-svn: 279439
Summary:
Fix for the upper bound check that was causing a build failure.
Reviewers: olista01, rengolin, t.p.northover
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D23501
llvm-svn: 278789
Summary:
The assembler currently does not check the branch target for CBZ/CBNZ
instructions, which only permit branching forwards with a positive offset. This
adds validation for the branch target to ensure negative PC-relative offsets are
not encoded into the instruction, whether specified as a literal or as an
assembler symbol.
Reviewers: rengolin, t.p.northover
Subscribers: llvm-commits, rengolin
Differential Revision: https://reviews.llvm.org/D23312
llvm-svn: 278788
This currently breaks the greendragon clang-stage1-configure-RA/ and
brotli. It is probably just uncovering a pre-existing problem. Reverting
temporarily to get the buildbots green again. A reduced testcase will
follow shortly.
This reverts commit r278659.
llvm-svn: 278711
Summary:
The assembler currently does not check the branch target for CBZ/CBNZ
instructions, which only permit branching forwards with a positive offset. This
adds validation for the branch target to ensure negative PC-relative offsets are
not encoded into the instruction, whether specified as a literal or as an
assembler symbol.
Reviewers: rengolin, t.p.northover
Subscribers: llvm-commits, rengolin
Differential Revision: https://reviews.llvm.org/D23312
llvm-svn: 278659
Moves of a value to a segment register from a 16-bit register is
equivalent to one from it's corresponding 32-bit register. Match gas's
behavior and rewrite instructions to the shorter of equivalent forms.
Reviewers: rnk, ab
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D23166
llvm-svn: 278031
Summary:
Add support for the .insn directive.
.insn is an s390 specific directive that allows encoding of an instruction
instead of using a mnemonic. The motivating case is some code in node.js that
requires support for the .insn directive.
Reviewers: koriakin, uweigand
Subscribers: koriakin, llvm-commits
Differential Revision: https://reviews.llvm.org/D21809
llvm-svn: 278012
Summary:
They are now lexed as a single token on targets where
MCAsmInfo::HasMipsExpressions is true and then parsed in a similar way to
the '~' operator as part of MCExpr::parseExpression.
As a result:
* expressions and immediates no longer have different parsing rules. The
difference is now solely down to whether evaluateAsAbsolute() succeeds.
* %hi(%neg(%gp_rel(x))) are no longer parsed as a single operator and
decomposed into the three MipsMCExpr nodes. They are parsed directly as
three MipsMCExpr nodes.
* parseMemOperand no longer needs to eat all the surrounding parenthesis
to get at the outermost operator to make this work
* %hi(%neg(%gp_rel(x))) and %lo(%neg(%gp_rel(x))) are no longer the only
3-in-1 relocs that parse for N64. They're still the only combinations that
are permitted in relocatable expressions though. Fixing that should be a
later patch.
* We no longer need to list all the tokens that can occur as the first token of
an expression or immediate.
test/MC/Mips/expr1.s:
This change also prevents the incorrect lowering of %lo(2*4)+foo to
%lo(8+foo) which is not an equivalent expression (the difference is
whether foo is truncated to 16-bit or not) and the test has been
updated to account for the macro expansion the correct expression requires.
Reviewers: sdardis
Subscribers: dsanders, sdardis, llvm-commits
Differential Revision: https://reviews.llvm.org/D23110
llvm-svn: 277988
Summary:
Add instruction formats E, RSI, SSd, SSE, and SSF.
Added BRXH, BRXLE, PR, MVCK, STRAG, and ECTG instructions to test out
those formats.
Reviewers: uweigand
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D23179
llvm-svn: 277822
Attempt 2: Retryign after Tsan.mman test fix.
Attempt 1: Recommitting after fixing test.
When parsing assembly where the line comment syntax is not hash, the
lexer cannot distinguish between hash's that start a hash line comment
and one that is part of an assembly statement and must be distinguished
during parsing. Previously, this was incompletely handled by not checking
for EndOfStatement at the end of statements and interpreting hash
prefixed statements as comments.
Change EndOfStatement Parsing to check for Hash comments and reintroduce
Hash statement parsing to catch previously handled cases.
Reviewers: rnk, majnemer
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D23017
llvm-svn: 277501
Recommitting after fixing overaggressive fastpath return in parsing.
Fix intel syntax special case identifier operands that refer to a constant
(e.g. .set <ID> n) to be interpreted as immediate not memory in parsing.
Associated commit to fix clang test commited shortly.
Reviewers: rnk
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D22585
llvm-svn: 277489
Recommitting after fixing test.
When parsing assembly where the line comment syntax is not hash, the
lexer cannot distinguish between hash's that start a hash line comment
and one that is part of an assembly statement and must be distinguished
during parsing. Previously, this was incompletely handled by not checking
for EndOfStatement at the end of statements and interpreting hash
prefixed statements as comments.
Change EndOfStatement Parsing to check for Hash comments and reintroduce
Hash statement parsing to catch previously handled cases.
Reviewers: rnk, majnemer
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D23017
llvm-svn: 277459
Summary:
When parsing assembly where the line comment syntax is not hash, the
lexer cannot distinguish between hash's that start a hash line comment
and one that is part of an assembly statement and must be distinguished
during parsing. Previously, this was incompletely handled by not checking
for EndOfStatement at the end of statements and interpreting hash
prefixed statements as comments.
Change EndOfStatement Parsing to check for Hash comments and reintroduce
Hash statement parsing to catch previously handled cases.
Reviewers: rnk, majnemer
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D23017
llvm-svn: 277407
Fix intel syntax special case identifier operands that refer to a constant
(e.g. .set <ID> n) to be interpreted as immediate not memory in parsing.
Reviewers: rnk
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D22585
llvm-svn: 276895
Summary:
This is one possible solution to the problem of ignoring constraints that Simon
raised in D21473 but it's a bit of a hack.
The integrated assembler currently ignores violations of the tied register
constraints when the operands involved in a tie are both present in the AsmText.
For example, 'dati $rs, $rt, $imm' with the '$rs = $rt' will silently replace
$rt with $rs. So 'dati $2, $3, 1' is processed as if the user provided
'dati $2, $2, 1' without any diagnostic being emitted.
This is difficult to solve properly because there are multiple parts of the
matcher that are silently forcing these constraints to be met. Tied operands are
rendered to instructions by cloning previously rendered operands but this is
unnecessary because the matcher was already instructed to render the operand it
would have cloned. This is also unnecessary because earlier code has already
replaced the MCParsedOperand with the one it was tied to (so the parsed input
is matched as if it were 'dati <RegIdx 2>, <RegIdx 2>, <Imm 1>'). As a result,
it looks like fixing this properly amounts to a rewrite of the tied operand
handling which affects all targets.
This patch however, merely inserts a checking hook just before the
substitution of MCParsedOperands and the Mips target overrides it. It's not
possible to accurately check the registers are the same this early (because
numeric registers haven't been bound to a register class yet) so it cheats a
bit and checks that the tokens that produced the operand are lexically
identical. This works because tied registers need to have the same register
class but it does have a flaw. It will reject 'dati $4, $a0, 1' for violating
the constraint even though $a0 ends up as the same register as $4.
Reviewers: sdardis
Subscribers: dsanders, llvm-commits, sdardis
Differential Revision: https://reviews.llvm.org/D21994
llvm-svn: 276867
Currently, for ARMCOFFMCAsmInfoMicrosoft, no comment character is set, thus the
idefault, '#', is used.
The hash character doesn't work as comment character in ARM assembly, since '#'
is used for immediate values.
The comment character is set to ';', which is the comment character used by MS
armasm.exe. (The microsoft armasm.exe uses a different directive syntax than
what LLVM currently supports though, similar to ARM's armasm.)
This allows inline assembly with immediate constants to be built (and brings the
assembly output from clang -S closer to being possible to assemble).
A test is added that verifies that ';' is correctly interpreted as comments in
this mode, and verifies that assembling code that includes literal constants
with a '#' works.
Patch by Martin Storsjö.
llvm-svn: 276859
The encoding of expressions as immediates wasn't correct, and was reported in
PR23000. However, we have done some refactoring on how immediates are handled
and now it seems the problem is fixed. This is a test just to make sure it
won't regress again.
llvm-svn: 276858
- More informative message when extension name is not an identifier token.
- Stop parsing directive if extension is unknown (avoid duplicate error
messages).
- Report unsupported extensions with a source location, rather than
report_fatal_error.
Differential Revision: https://reviews.llvm.org/D22806
llvm-svn: 276748
This option, compatible with gas's -mimplicit-it, controls the
generation/checking of implicit IT blocks in ARM/Thumb assembly.
This option allows two behaviours that were not possible before:
- When in ARM mode, emit a warning when assembling a conditional
instruction that is not in an IT block. This is enabled with
-mimplicit-it=never and -mimplicit-it=thumb.
- When in Thumb mode, automatically generate IT instructions when an
instruction with a condition code appears outside of an IT block. This
is enabled with -mimplicit-it=thumb and -mimplicit-it=always.
The default option is -mimplicit-it=arm, which matches the existing
behaviour (allow conditional ARM instructions outside IT blocks without
warning, and error if a conditional Thumb instruction is outside an IT
block).
The general strategy for generating IT blocks in Thumb mode is to keep a
small list of instructions which should be in the IT block, and only
emit them when we encounter something in the input which means we cannot
continue the block. This could be caused by:
- A non-predicable instruction
- An instruction with a condition not compatible with the IT block
- The IT block already contains 4 instructions
- A branch-like instruction (including ALU instructions with the PC as
the destination), which cannot appear in the middle of an IT block
- A label (branching into an IT block is not legal)
- A change of section, architecture, ISA, etc
- The end of the assembly file.
Some of these, such as change of section and end of file, are parsed
outside of the ARM asm parser, so I've added a new virtual function to
AsmParser to ensure any previously-parsed instructions have been
emitted. The ARM implementation of this flushes the currently pending IT
block.
We now have to try instruction matching up to 3 times, because we cannot
know if the current IT block is valid before matching, and instruction
matching changes depending on the IT block state (due to the 16-bit ALU
instructions, which set the flags iff not in an IT block). In the common
case of not having an open implicit IT block and the instruction being
matched not needing one, we still only have to run the matcher once.
I've removed the ITState.FirstCond variable, because it does not store
any information that isn't already represented by CurPosition. I've also
updated the comment on CurPosition to accurately describe it's meaning
(which this patch doesn't change).
Differential Revision: https://reviews.llvm.org/D22760
llvm-svn: 276747
Add the instruction alias sgtu (register form only), two operand forms of
s[rl]l and sra, and missing single/two operand forms of dnegu/neg.
Reviewers: dsanders
Differential Revision: https://reviews.llvm.org/D22752
llvm-svn: 276736
The saturation instructions appeared in v6T2, with DSP extensions, but they
were being accepted / generated on any, with the new introduction of the
saturation detection in the back-end. This commit restricts the usage to
DSP-enable only cores.
Fixes PR28607.
llvm-svn: 276701
There's not much functional change, but it really is an architectural feature
(on v6T2, v7A, v7R and v7EM) rather than something each CPU implements
individually.
The main functional change is the default behaviour you get when specifying
only "-triple".
llvm-svn: 276013
The standard local dynamic model for TLS on ARM systems needs two
relocations:
- R_ARM_TLS_LDM32 (module idx)
- R_ARM_TLS_LDO32 (offset of object from origin of module TLS block)
In GNU style assembler we use symbol(tlsldm) and symbol(tlsldo) to
produce these relocations.
llvm-mc for ARM supports symbol(tlsldo) but does not support symbol(tlsldm).
This patch wires up the existing symbol(tlsldm) to R_ARM_TLS_LDM32.
TLS for ARM is defined in Addenda to, and Errata in, the ABI for the
ARM Architecture
Differential Revision: https://reviews.llvm.org/D22461
llvm-svn: 275977
Summary:
N32 and N64 follow the standard ELF conventions (.L) whereas O32 uses its own
($).
This fixes the majority of object differences between -fintegrated-as and
-fno-integrated-as.
Reviewers: sdardis
Subscribers: dsanders, sdardis, llvm-commits
Differential Revision: https://reviews.llvm.org/D22412
llvm-svn: 275967
Add parseToken and compatriot functions to stitch error checks in
straight linear code. As part of this fix some erronous handling of
directives where the EndOfStatement token either was not checked or
Lexed on termination.
Reviewers: rnk, majnemer
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D22312
llvm-svn: 275795
For a fully inlined call chain like a -> b -> c -> d, we were emitting
line info for 'd' 3 separate times: once for d's actual InlineSite line
table, and twice for 'b' and 'c'. This is particularly inefficient when
all these functions are in different headers, because now we need to
encode the file change. Windbg was coping with our suboptimal output, so
this should not be noticeable from the debugger.
llvm-svn: 275502
We were able to assemble, but not disassemble.
Note that fixupRMValue was truncating EA_REG_BND0-3 because we hit
the uint8_t max. The control registers were already squarely above
it, but I don't think they ever go in .r/m, only in .reg.
I also did notice an extra REX.W in our encoding, but I think that's
fine.
llvm-svn: 275427
Immediate branch targets aren't commonly used, but if they are we should make
sure they can actually be encoded. This means they must be divisible by 2 when
targeting Thumb mode, and by 4 when targeting ARM mode.
Also do a little naming cleanup while I was changing everything around anyway.
llvm-svn: 275116
Summary: Add support for the z13 instructions LOCHI and LOCGHI which
conditionally load immediate values. Add target instruction info hooks so
that if conversion will allow predication of LHI/LGHI.
Author: RolandF
Reviewers: uweigand
Subscribers: zhanjunl
Commiting on behalf of Roland.
Differential Revision: http://reviews.llvm.org/D22117
llvm-svn: 275086
Preserve assembly comments from input in output assembly and flags to
toggle property. This is on by default for inline assembly and off in
llvm-mc.
Parsed comments are emitted immediately before an EOL which generally
places them on the expected line.
Reviewers: rtrieu, dwmw2, rnk, majnemer
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D20020
llvm-svn: 275058
Our assertions in WinCOFFStreamer had unexpected side effects resulting
in symbols getting unexpectedly marked as used.
This fixes PR28462.
llvm-svn: 274941
Summary: Branch off the work to add support for the .word directive,
using addAliasForDirective.
Reviewers: koriakin
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D22142
llvm-svn: 274878
Summary:
* Similiar to the ARM backend yse the peephole optimizer to generate more conditional ALU operations;
* Add predicated type with default always true to RR instructions in LanaiInstrInfo.td;
* Move LanaiSetflagAluCombiner into optimizeCompare;
* The ASM parser can currently only handle explicitly specified CC, so specify ".t" (true) where needed in the ASM test;
* Remove unused MachineOperand flags;
Reviewers: eliben
Subscribers: aemerson
Differential Revision: http://reviews.llvm.org/D22072
llvm-svn: 274807
The way the named arguments for various system instructions are handled at the
moment has a few problems:
- Large-scale duplication between AArch64BaseInfo.h and AArch64BaseInfo.cpp
- That weird Mapping class that I have no idea what I was on when I thought
it was a good idea.
- Searches are performed linearly through the entire list.
- We print absolutely all registers in upper-case, even though some are
canonically mixed case (SPSel for example).
- The ARM ARM specifies sysregs in terms of 5 fields, but those are relegated
to comments in our implementation, with a slightly opaque hex value
indicating the canonical encoding LLVM will use.
This adds a new TableGen backend to produce efficiently searchable tables, and
switches AArch64 over to using that infrastructure.
llvm-svn: 274576
Summary: dst_sel and dst_unused disabled for VOPC as they have no effect on result
Reviewers: artem.tamazov, tstellarAMD, vpykhtin
Subscribers: arsenm, kzhuravl
Differential Revision: http://reviews.llvm.org/D21376
llvm-svn: 274340
[x86] (PR15455) While (ins|outs)[bwld] instructions do not take %dx as a
memory operand, various unofficial references do and objdump
disassembles to this format. Extend special treatment of
similar (in|out)[bwld] operations.
Reviewers: craig.topper, rnk, ab
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D18837
llvm-svn: 274152
Summary:
We will start generating this in a future patch.
Reviewers: arsenm, kzhuravl, rafael, ruiu, tony-tye
Subscribers: arsenm, llvm-commits, kzhuravl
Differential Revision: http://reviews.llvm.org/D21482
llvm-svn: 273628
Summary:
The backend has no reason to behave like a driver and should generally do
as it's told (and error out if it can't) instead of trying to figure out
what the API user meant. The default ABI is still derived from the arch
component as a concession to backwards compatibility.
API-users that previously passed an explicit CPU and a triple that was
inconsistent with the CPU (e.g. mips-linux-gnu and mips64r2) may get a
different ABI to what they got before. However, it's expected that there
are no such users on the basis that CodeGen has been asserting that the
triple is consistent with the selected ABI for several releases. API-users
that were consistent or passed '' or 'generic' as the CPU will see no
difference.
Reviewers: sdardis, rafael
Subscribers: rafael, dsanders, sdardis, llvm-commits
Differential Revision: http://reviews.llvm.org/D21466
llvm-svn: 273557
Summary:
When parseAnyRegister() encounters a symbol alias, it parses integers and adds
a corresponding expression to the operand list. This is clearly wrong since the
only operands that parseAnyRegister() should be accepting are registers.
It's not clear why this code was added and there are no test cases that cover
it. I think it might be leftover from when searchSymbolAlias() was more widely
used.
Reviewers: sdardis
Subscribers: dsanders, sdardis, llvm-commits
Differential Revision: http://reviews.llvm.org/D21377
llvm-svn: 273555
dext and dins, along with their 'm' and 'u' variants are defined in mips64r2,
not mips64.
Reviewers: dsanders, vkalintiris
Differential Review: http://reviews.llvm.org/D21608
llvm-svn: 273549
llvm-mc is a developer tool, as such it make sense for it to use new
features by default.
This doesn't change the user facing clang, which still defaults to non
relaxable relocations.
llvm-svn: 273014
Recommiting after fixing non-atomic insert to front of SmallVector in
MCAsmLexer.h
Add explicit Comment Token in Assembly Lexing for future support for
outputting explicit comments from inline assembly. As part of this,
CPPHash Directives are now explicitly distinguished from Hash line
comments in Lexer.
Line comments are recorded as EndOfStatement tokens, not Comment tokens
to simplify compatibility with current TargetParsers. This slightly
complicates comment output.
This remove all lexing tasks out of the parser, does minor cleanup
to remove extraneous newlines Asm Output, and some improvements white
space handling.
Reviewers: rtrieu, dwmw2, rnk
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D20009
llvm-svn: 273007
Add explicit Comment Token in Assembly Lexing for future support for
outputting explicit comments from inline assembly. As part of this,
CPPHash Directives are now explicitly distinguished from Hash line
comments in Lexer.
Line comments are recorded as EndOfStatement tokens, not Comment tokens
to simplify compatibility with current TargetParsers. This slightly
complicates comment output.
This remove all lexing tasks out of the parser, does minor cleanup
to remove extraneous newlines Asm Output, and some improvements white
space handling.
Reviewers: rtrieu, dwmw2, rnk
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D20009
llvm-svn: 272953
The -mattr options in these four tests have no effect on the output of
llvm-objdump. In the case of the two Mips tests, removing the -mattr option
left duplicate RUN lines so the duplicates have been removed.
llvm-svn: 272906
Summary:
The Mips implementation only covers the feature bits described by the ELF
e_flags so far. Mips stores additional feature bits such as MSA in the
.MIPS.abiflags section.
Also fixed a small bug this revealed where microMIPS wouldn't add the
EF_MIPS_MICROMIPS flag when using -filetype=obj.
Reviewers: echristo, rafael
Subscribers: rafael, mehdi_amini, dsanders, sdardis, llvm-commits
Differential Revision: http://reviews.llvm.org/D21125
llvm-svn: 272880
The backend has been around for years, it's pretty ridiculous that we can't
even use the preferred form for printing "MOV" aliases. Unfortunately, TableGen
can't handle the complex predicates when printing so it's a bunch of nasty C++.
Oh well.
llvm-svn: 272865
Summary:
We we have an MCConstantExpr, we can encode it directly into the instruction
instead of emitting fixups.
Reviewers: artem.tamazov, vpykhtin, SamWot, nhaustov, arsenm
Subscribers: arsenm, llvm-commits, kzhuravl
Differential Revision: http://reviews.llvm.org/D21236
Change-Id: I88b3edf288d48e65c5d705fc4850d281f8e36948
llvm-svn: 272750
Summary:
We can now reference symbols directly in operands, like this:
s_mov_b32 s0, global
Reviewers: artem.tamazov, vpykhtin, SamWot, nhaustov
Subscribers: arsenm, llvm-commits, kzhuravl
Differential Revision: http://reviews.llvm.org/D21038
llvm-svn: 272748
The feature allows for conditional assembly etc.
TODO: make those symbols read-only.
Test added.
Differential Revision: http://reviews.llvm.org/D21238
llvm-svn: 272673
This patch implements the N32 case where -mno-shared is in effect. The case
where -mshared is in effect will be added later since doing that now requires
additional changes to how we handle %hi(%neg(%gp_rel(foo))) expressions to
emit the three relocations as three relocations (currently only one of the
three would be emitted) which then requires further changes to our MCFixup
handling.
While we could fix both cases together, fixing the -mno-shared case allows us
to fix the ELFCLASS bug (where N32 incorrectly uses ELFCLASS64 instead of
ELFCLASS32) in a way that allows cpsetup.s to check for a correct output instead
of another incorrect output.
Reviewers: sdardis
Subscribers: dsanders, llvm-commits, sdardis
Differential Revision: http://reviews.llvm.org/D21131
llvm-svn: 272652
Support and generate Compare and Traps like CRT, CIT, etc.
Support Trap as legal DAG opcodes and generate "j .+2" for them by default.
Add support for Conditional Traps and use the If Converter to convert them into
the corresponding compare and trap opcodes.
Differential Revision: http://reviews.llvm.org/D21155
llvm-svn: 272419
Summary:
sext() modifier is supported in SDWA instructions only for integer operands. Spec is unclear should integer operands support abs and neg modifiers with sext - for now they are not supported.
Renamed InputModsWithNoDefault to FloatInputMods. Added SextInputMods for operands that support sext() modifier.
Added AMDGPUOperand::Modifier struct to handle register and immediate modifiers.
Code cleaning in AMDGPUOperand class: organize method in groups (render-, predicate-methods...).
Reviewers: vpykhtin, artem.tamazov, tstellarAMD
Subscribers: arsenm, kzhuravl
Differential Revision: http://reviews.llvm.org/D20968
llvm-svn: 272384
Add support to the AArch64 IAS for the `.arch` directive. This allows the
assembly input to use architectural functionality in part of a file. This is
used in existing code like BoringSSL.
Resolves PR26016!
llvm-svn: 272241
Again, the Microsoft linker does not like empty substreams.
We still emit an empty string table if CodeView is enabled, but that
doesn't cause problems because it always contains at least one null
byte.
llvm-svn: 272183
These instructions end in "S" but are not flag-setting, so they need including
in the list of special cases in the assembly parser.
Differential Revision: http://reviews.llvm.org/D21077
llvm-svn: 272015
The Thumb2 conditional branch B<cond>.W has a different encoding (T3)
to the unconditional branch B.W (T4) as it needs to record <cond>.
As the encoding is different the B<cond>.W is given a different
relocation type.
ELF for the ARM Architecture 4.6.1.6 (Table-13) states that
R_ARM_THM_JUMP19 should be used for B<cond>.W. At present the
MC layer is using the R_ARM_THM_JUMP24 from B.W.
This change makes B<cond>.W use R_ARM_THM_JUMP19 and alters the
existing test that checks for R_ARM_THM_JUMP24 to expect
R_ARM_THM_JUMP19.
llvm-svn: 271997
Another step for unification llvm assembler/disassembler with sp3.
Besides, CodeGen output is a bit improved, thus changes in CodeGen tests.
Assembler/Disassembler tests updated/added.
Differential Revision: http://reviews.llvm.org/D20796
llvm-svn: 271900
new instruction to ARM and AArch64 targets and several system registers.
Patch by: Roger Ferrer Ibanez and Oliver Stannard
Differential Revision: http://reviews.llvm.org/D20282
llvm-svn: 271670
Summary:
Added custom converters for SDWA instruction to support optional operands and modifiers.
Support for _dpp and _sdwa suffixes that allows to force DPP or SDWA encoding for instructions.
Reviewers: tstellarAMD, vpykhtin, artem.tamazov
Subscribers: arsenm, kzhuravl
Differential Revision: http://reviews.llvm.org/D20625
llvm-svn: 271655
Summary:
N32 support will follow in a later patch since the symbol version of 'la'
incorrectly believes N32 to have 64-bit pointers and rejects it early.
This fixes the three incorrectly expanded 'la' macros found in bionic.
Reviewers: sdardis
Subscribers: dsanders, llvm-commits, sdardis
Differential Revision: http://reviews.llvm.org/D20820
llvm-svn: 271644
Do not issue lexing errors found during the parsing of macro body
definitions and parseIdentifier function in AsmParser. This changes the
Parser to not issue a lexing error when we reach an error, but rather
when it is consumed allowing us time to examine and recover from an
error.
As a result, of this, we stop issuing a both lexing error and a parsing
error in floating-literals test. Minor tweak to parseDirectiveRealValue
to favor more meaningful lexing error over less helpful parse error.
Reviewers: rnk, majnemer
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D20535
llvm-svn: 271542
Enforce compact branch register restrictions such as the use of the zero
register, both operands being the same register. Emit clear error in such
cases as the issue is subtle.
For bovc and bnvc, silently fixup such cases when emitting objects directly,
like LLVM started doing in rL269899.
Reviewers: vkalintiris, dsanders
Differential Review: http://reviews.llvm.org/D20475
llvm-svn: 271301
We were producing R_X86_64_GOTPCRELX for invalid instructions and
sometimes producing R_X86_64_GOTPCRELX instead of
R_X86_64_REX_GOTPCRELX.
llvm-svn: 271118
It would be better to check the valid/expected size of the immediate operand, but this is
generally better than what we print right now.
Differential Revision: http://reviews.llvm.org/D20385
llvm-svn: 271114
This matches the behavior of GNU assembler which supports symbolic
expressions in absolute expressions used in assembly directives.
Differential Revision: http://reviews.llvm.org/D20752
llvm-svn: 271102
This matches the behavior of GNU assembler which supports symbolic
expressions in absolute expressions used in assembly directives.
Differential Revision: http://reviews.llvm.org/D20656
llvm-svn: 271028
The isMemWithSimmOffset predicate rejects relocations which is incorrect
behaviour. Linkers and other tools should handle|warn|error when the
field overflows.
Reviewers: dsanders, vkalintiris
Differential Revision: http://reviews.llvm.org/D20727
llvm-svn: 270995
It was: "Recommit 270977 - [llvm-mc] - Teach llvm-mc to generate zlib styled compression sections."
Fix:
since test requires no zlib available and r270987 changed the
compression flag for llvm-mc to mandatory specify the compression style,
then just add 2 available styles to this test.
llvm-svn: 270992
Register numbers may be specified as assembly-time expressions.
This feature can be useful in macros and alike. However, expressions
are supported within sqare braces only.
Sqare braces were initially intended to support specifying of multiple
(pairs/quads...) registers. Syntax like v[8:8] which specifies single register
is also supported. That allows expressions but looks a bit unnatural.
This change supports syntax REG[EXPR].
Tests added.
Differential Revision: http://reviews.llvm.org/D20588
llvm-svn: 270990
Fix: updated clang code which was not updated by mistake.
Original commit message:
[llvm-mc] - Teach llvm-mc to generate zlib styled compression sections.
This patch is strongly based on previously reverted D20331.
(because of gnuutils < 2.26 does not support compressed debug sections in non zlib-gnu style)
Difference that this patch supports both zlib and zlib-gnu styles.
-compress-debug-sections option now supports next values:
-compress-debug-sections=zlib-gnu
-compress-debug-sections=zlib
-compress-debug-sections=none
Previously specifying -compress-debug-sections enabled zlib-gnu compression,
so anyone can put "-compress-debug-sections=zlib-gnu" to restore the behavior
that was before this patch for case when compression was enabled.
Differential revision: http://reviews.llvm.org/D20676
llvm-svn: 270987
It broke buildbot:
http://lab.llvm.org:8011/builders/llvm-clang-lld-x86_64-scei-ps4-ubuntu-fast/builds/13585/steps/build/logs/stdio
Initial commit message:
[llvm-mc] - Teach llvm-mc to generate zlib styled compression sections.
This patch is strongly based on previously reverted D20331.
(because of gnuutils < 2.26 does not support compressed debug sections in non zlib-gnu style)
Difference that this patch supports both zlib and zlib-gnu styles.
-compress-debug-sections option now supports next values:
-compress-debug-sections=zlib-gnu
-compress-debug-sections=zlib
-compress-debug-sections=none
Previously specifying -compress-debug-sections enabled zlib-gnu compression,
so anyone can put "-compress-debug-sections=zlib-gnu" to restore the behavior
that was before this patch for case when compression was enabled.
Differential revision: http://reviews.llvm.org/D20676
llvm-svn: 270978
This patch is strongly based on previously reverted D20331.
(because of gnuutils < 2.26 does not support compressed debug sections in non zlib-gnu style)
Difference that this patch supports both zlib and zlib-gnu styles.
-compress-debug-sections option now supports next values:
-compress-debug-sections=zlib-gnu
-compress-debug-sections=zlib
-compress-debug-sections=none
Previously specifying -compress-debug-sections enabled zlib-gnu compression,
so anyone can put "-compress-debug-sections=zlib-gnu" to restore the behavior
that was before this patch for case when compression was enabled.
Differential revision: http://reviews.llvm.org/D20676
llvm-svn: 270977
We were creating a weak external that tried to reference a static symbol. That
would always fail to link with link.exe.
We now create an external symbol in the same position as the local and refer
to that. This works with link.exe and matches what gas does.
llvm-svn: 270906
Hwreg(...) syntax implementation unified with sendmsg(...).
Common strings moved to Utils
MathExtras.h functionality utilized.
Added missing build dependency in Disassembler.
Differential Revision: http://reviews.llvm.org/D20381
llvm-svn: 270871
If there is already debug info in the assembly file, and user hope to
use -g option for compiling, we think we should not directly report an
error.
According to what GNU assembler did, it just reused the debug info in
the assembly file, and turned off the DEBUG_TYPE option so that there
will be no new debug info emitted by assembler. This fix is just as what
GNU assembler did.
The concern is the situation that there are two .text sections in the
assembly file, one with debug info and the other one without. Currently
with this fix, the assembler will no longer generate any debug info for
the second .text section. And this is what GNU assembler exactly did for
this situation. So I think this still make some sense.
Patch by Zhizhou Yang!
Differential Revision: http://reviews.llvm.org/D20002
llvm-svn: 270806
This matches the behavior of GNU assembler which supports symbolic
expressions in absolute expressions used in assembly directives.
Differential Revision: http://reviews.llvm.org/D20337
llvm-svn: 270786
Now, after landing r270560, r270557, r270320 it is a proper time.
Original commit message:
[llvm-mc] - Teach llvm-mc to generate compressed debug sections in zlib style.
Before this patch llvm-mc generated zlib-gnu styled sections.
That means no SHF_COMPRESSED flag was set, magic 'zlib' signature
was used in combination with full size field. Sections were renamed to "*.z*".
This patch reimplements the compression style to zlib one as zlib-gnu looks
to be depricated everywhere.
Differential revision: http://reviews.llvm.org/D20331
llvm-svn: 270569
Main problem that .debug_info
section was used to check that llvm-dwarfdump is able to decompress
data that was compressed with llvm-mc tool. This section was not compressed
actually, because consumes more space in compressed view.
I changed testcase to use .debug_str section which is one that
is really compressed. So currently test do what is probably was expected to do:
checks that "data"->llvm-mc->llvm-dwarfdump->dumps back initial "data".
Differential revision: http://reviews.llvm.org/D20466
llvm-svn: 270560
Summary:
Change process of parsing of optional operands. All optional operands use same parsing method - parseOptionalOperand().
No default values are added to OperandsVector.
Get rid of WORKAROUND_USE_DUMMY_OPERANDS_INSTEAD_MUTIPLE_DEFAULT_OPERANDS.
Reviewers: tstellarAMD, vpykhtin, artem.tamazov, nhaustov
Subscribers: arsenm, kzhuravl
Differential Revision: http://reviews.llvm.org/D20527
llvm-svn: 270556
Patch by Nitesh Jain.
Summary: The type of Imm in MipsDisassembler.cpp was incorrect since SignExtend64 return int64_t type.As per the MIPSr6 doc ,the offset is added to the address of the instruction following the branch (not the branch itself), to form a PC-relative effective target address hence “4” is added to the offset. The offset of some test case are update to reflect the changes due to “ + 4 ” offset and new test case for negative offset are added.
Reviewers: dsanders, vkalintiris
Differential Revision: http://reviews.llvm.org/D17540
llvm-svn: 270542
It broke buildbot:
http://lab.llvm.org:8011/builders/clang-s390x-linux/builds/4817/steps/ninja%20check%201/logs/stdio
Actually it is just because D20273 not yet commited, but these 2 were crossing with each other,
and I`ll better find the way to land them separatelly soon.
Initial commit message:
[llvm-mc] - Teach llvm-mc to generate compressed debug sections in zlib style.
Before this patch llvm-mc generated zlib-gnu styled sections.
That means no SHF_COMPRESSED flag was set, magic 'zlib' signature
was used in combination with full size field. Sections were renamed to "*.z*".
This patch reimplements the compression style to zlib one as zlib-gnu looks
to be depricated everywhere.
Differential revision: http://reviews.llvm.org/D20331
llvm-svn: 270075
Before this patch llvm-mc generated zlib-gnu styled sections.
That means no SHF_COMPRESSED flag was set, magic 'zlib' signature
was used in combination with full size field. Sections were renamed to "*.z*".
This patch reimplements the compression style to zlib one as zlib-gnu looks
to be depricated everywhere.
Differential revision: http://reviews.llvm.org/D20331
llvm-svn: 270070
Fixes for MUBUF_Atomic instructions to make operand list valid:
- For RTN insns, make a copy of $vdata_in operand as $vdata.
- Do not add operand for GLC, it is hardcoded and comes as a token.
Workaround to avoid adding multiple default optional operands.
Tests added.
Differential Revision: http://reviews.llvm.org/D20257
llvm-svn: 270049
Summary:
MONITORX/MWAITX instructions provide similar capability to the MONITOR/MWAIT
pair while adding a timer function, such that another termination of the MWAITX
instruction occurs when the timer expires. The presence of the MONITORX and
MWAITX instructions is indicated by CPUID 8000_0001, ECX, bit 29.
The MONITORX and MWAITX instructions are intercepted by the same bits that
intercept MONITOR and MWAIT. MONITORX instruction establishes a range to be
monitored. MWAITX instruction causes the processor to stop instruction execution
and enter an implementation-dependent optimized state until occurrence of a
class of events.
Opcode of MONITORX instruction is "0F 01 FA". Opcode of MWAITX instruction is
"0F 01 FB". These opcode information is used in adding tests for the
disassembler.
These instructions are enabled for AMD's bdver4 architecture.
Patch by Ganesh Gopalasubramanian!
Reviewers: echristo, craig.topper, RKSimon
Subscribers: RKSimon, joker.eph, llvm-commits
Differential Revision: http://reviews.llvm.org/D19795
llvm-svn: 269911
MC only needs to know if the output is PIC or not. It never has to
decide about creating GOTs and PLTs for example. The only thing that
MC itself uses this information for is expanding "macros" in sparc and
mips. The rest I am pretty sure could be moved to CodeGen.
This is a cleanup and isolates the code from future changes to
Reloc::Model.
llvm-svn: 269909
The movw instruction is only available in ARM state for V6T2 and above.
The MOVi16 instruction has requirement HasV6T2 but the InstAlias
for mov rd, imm where the operand is imm0_65535_expr:$imm does not.
This means that movw can incorrectly be used in ARMv4 and ARMv5 by
writing mov rd, 0x1234. The simple fix is to the requirement HasV6T2
to the InstAlias. Tests added to not-armv4.s.
Patch by Peter Smith.
llvm-svn: 269761
Summary: On Linux, /usr/include/bits/byteswap-16.h defines __byteswap_16(x) as an inlined LRVH (Load Reversed Half-word) instruction. The SystemZ back-end did not support this opcode and the inlined assembly would cause a fatal error.
Reviewers: bryanpkc, uweigand
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D18732
llvm-svn: 269688
Summary:
The failure r269410 worked around turned out to be caused by an incorrect
evaluation of R_MICROMIPS_GOT16 which then caused the GOT entries to be
incorrect.
This patch fixes the evaluation and reverts r269410.
Reviewers: sdardis, vkalintiris, rafael
Subscribers: rafael, dsanders, sdardis, llvm-commits
Differential Revision: http://reviews.llvm.org/D20242
llvm-svn: 269641
Summary:
This fixes PR27682. Additionally, '.set micromips' by itself is not sufficient
to raise the EF_MIPS_MICROMIPS flag. It is also necessary to emit a microMIPS
instruction. This has also been fixed.
Reviewers: sdardis, vkalintiris, rafael
Subscribers: rafael, dsanders, sdardis, llvm-commits
Differential Revision: http://reviews.llvm.org/D20214
llvm-svn: 269639
Author: obucina
Reviewers: dsanders
Adds support for third operand for [D]DIV[U] instructions. Additional test for case when destination reg is zero register
Differential Revision: http://reviews.llvm.org/D16888
llvm-svn: 269636
Most immediates are printed in Aarch64InstPrinter using 'formatImm' macro,
but not all of them.
Implementation contains following rules:
- floating point immediates are always printed as decimal
- signed integer immediates are printed depends on flag settings
(for negative values 'formatImm' macro prints the value as i.e -0x01
which may be convenient when imm is an address or offset)
- logical immediates are always printed as hex
- the 64-bit immediate for advSIMD, encoded in "a🅱️c:d:e:f:g:h" is always printed as hex
- the 64-bit immedaite in exception generation instructions like:
brk, dcps1, dcps2, dcps3, hlt, hvc, smc, svc is always printed as hex
- the rest of immediates is printed depends on availability
of -print-imm-hex
Signed-off-by: Maciej Gabka <maciej.gabka@arm.com>
Signed-off-by: Paul Osmialowski <pawel.osmialowski@arm.com>
Differential Revision: http://reviews.llvm.org/D16929
llvm-svn: 269446
It's not entirely clear why R_MICROMIPS_(GOT|HI16|LO16) are evaluated
incorrectly in a small number of the LNT tests at this point. However, it's not
related to the STO_MIPS_MICROMIPS issue.
At this point all the microMIPS-related changes of r268900 have been reverted.
llvm-svn: 269410
This change implements the transformation in processInstruction() for the
LDR rt, =expression to MOV rt, expression when the expression can be evaluated
and can fit into the immediate field of the MOV or a MVN.
Across the ARM and Thumb instruction sets there are several cases to consider,
each with a different range of representatble constants.
In ARM we have:
* Modified immediate (All ARM architectures)
* MOVW (v6t2 and above)
In Thumb we have:
* Modified immediate (v6t2, v7m and v8m.mainline)
* MOVW (v6t2, v7m, v8.mainline and v8m.baseline)
* Narrow Thumb MOV that can be used in an IT block (non flag-setting)
If the immediate fits any of the available alternatives then we make the transformation.
Fixes 25722.
Patch by Peter Smith.
llvm-svn: 269354
Alter instances in the test-suite that use immediates that can be represented
in the immediate field of a MOV. The reason for doing this is that when the
LDR rt,=imm transformation to MOV rt, imm the existing tests do not need to
be modified.
Required by the patch that fixes PR25722.
Patch by Peter Smith.
llvm-svn: 269353
Summary:
This expands on r269179 to fix an additional case that was not covered by our
tests. The assembler temporary is not needed when the .cprestore offset fits
inside a simm16 and it is not an error to use it inside a '.set noat' in this
case.
Reviewers: emaste, seanbruno, sdardis
Subscribers: dsanders, sdardis, llvm-commits
Differential Revision: http://reviews.llvm.org/D20199
llvm-svn: 269295
As explained in r269196, microMIPS has a special case that is not correctly
implemented in LLVM. If we have a symbol 'foo' which is equivalent to
'.text+0x10'. The value of an R_MICROMIPS_LO16 relocation using 'foo' is
'foo+0x11' and not 'foo+0x10'. The in-place addend should therefore be 0x11.
This commit reverts a little more of the effect of r268900 by keeping the
symbol when the STO_MIPS_MICROMIPS flag is set for R_MIPS_GPREL32 relocations.
This fixes SingleSource/UnitTests/2003-08-11-VaListArg, and
SingleSource/UnitTests/2003-05-07-VarArgs for microMIPS.
I believe there are additional relocations that have the same issue (e.g.
R_MIPS_64, and R_MIPS_GPREL16) but for now I'm focusing on restoring our
internal buildbots back to the green state we had in r268899.
llvm-svn: 269294
Summary:
This eliminates the default case for N64 that was left out of r269047.
The change to R_MIPS_SUB is needed in this patch to make this testable since
%lo(%neg(%gp_rel(foo))) and %hi(%neg(%gp_rel(foo))) remain the only ways to get
a compound relocation from the assembler.
Reviewers: sdardis, rafael
Subscribers: dsanders, llvm-commits, sdardis
Differential Revision: http://reviews.llvm.org/D20097
llvm-svn: 269280
microMIPS has a special case that is not correctly implemented in LLVM. If we
have a symbol 'foo' which is equivalent to '.text+0x10'. The value of an
R_MICROMIPS_LO16 relocation using 'foo' is 'foo+0x11' and not 'foo+0x10'. The
in-place addend should therefore be 0x11.
Work around this by partially reverting the effect of r268900 by keeping the
symbol when the STO_MIPS_MICROMIPS flag is set. This fixes
SingleSource/Regression/C/PR640 for microMIPS.
llvm-svn: 269196
Summary:
r268058 unintentionally made the retrieval of the current assembler temporary
unconditional. This was fine for the existing tests but it broke the cases
where the assembler temporary is not needed (N32/N64 or not PIC) and is
unavailable due to a '.set noat' directive.
This fixes FreeBSD's libc.
Reviewers: emaste, sdardis, seanbruno
Subscribers: dsanders, emaste, sdardis, llvm-commits
Differential Revision: http://reviews.llvm.org/D20093
llvm-svn: 269179
Added support for extended mnemonics for the following branch instructions and
load/store-on-condition opcodes:
BR, LOCR, LOCGR, LOC, LOCG, STOC, STOCG
Phabricator: http://reviews.llvm.org/D19729
Committing on behalf of Zhan Liau
llvm-svn: 269106
Following post-commit comments on r268900 from Rafael Espindola:
The missing relocations are now explicitly listed in the switch statement with
appropriate FIXME comments and the default path is now unreachable. The
temporary exception to this is that compound relocations for N64 still have a
default path that returns true. This is because fixing that case ought to be a
separate patch.
Also make R_MIPS_NONE return false since it has no effect on the section data.
llvm-svn: 269047
This change adds SMAC (signed multiply-accumulate) and UMAC (unsigned multiply-accumulate) for LEON subtargets of the Sparc processor.
The new files LeonFeatures.td and leon-instructions.ll will both be expanded in future, so I want to leave them separate as small files for this review, to be expanded in future check-ins.
Note: The functions are provided only for inline-assembly provision. No DAG selection is provided.
Differential Revision: http://reviews.llvm.org/D19911
llvm-svn: 268908
Summary:
In theory, care must be taken to ensure that pairs of R_MIPS_(GOT|HI|LO)16
make the same decision on both relocs in the reloc pair but in practice
this isn't as hard as it sounds and only limits the complexity of the
predicate used. We handle all three with the same code to ensure their
decisions always agree with each other.
Reviewers: sdardis
Subscribers: rafael, dsanders, sdardis, llvm-commits
Differential Revision: http://reviews.llvm.org/D19016
llvm-svn: 268900
Added support for sendmsg(MSG[, OP[, STREAM_ID]]) syntax
in s_sendmsg and s_sendmsghalt instructions.
The syntax matches the SP3 assembler/disassembler rules.
That is why implicit inputs (like M0 and EXEC) are not printed
to disassembly output anymore.
sendmsg(...) allows only known message types and attributes,
even if literals are used instead of symbolic names.
However, raw literal (without "sendmsg") still can be used,
and that allows for any 16-bit value.
Tests updated/added.
Differential Revision: http://reviews.llvm.org/D19596
llvm-svn: 268762
