This moves one case of raw text checking down into the MCStreamer
interfaces in the form of a virtual function, even if we ultimately end
up consolidating on the one-or-many line tables issue one day, this is
nicer in the interim. This just generally streamlines a bunch of use
cases into a common code path.
llvm-svn: 205287
This commit updates the stackmap format to version 1 to indicate the
reorganizaion of several fields. This was done in order to align stackmap
entries to their natural alignment and to minimize padding.
Fixes <rdar://problem/16005902>
llvm-svn: 205254
If we have two unique values for a v2i64 build vector, this will always result
in two vector loads if we expand using shuffles. Only one is necessary.
llvm-svn: 205231
This is a more thorough fix for the issue than r203483. An IR pass will run
before NVPTX codegen to make sure there are no invalid symbol names that can't
be consumed by the ptxas assembler.
llvm-svn: 205212
When the loop vectorizer vectorizes code that uses the loop induction variable,
we often end up with IR like this:
%b1 = insertelement <2 x i32> undef, i32 %v, i32 0
%b2 = shufflevector <2 x i32> %b1, <2 x i32> undef, <2 x i32> zeroinitializer
%i = add <2 x i32> %b2, <i32 2, i32 3>
If the add in this example is not legal (as is the case on PPC with VSX), it
will be scalarized, and we'll end up with a number of extract_vector_elt nodes
with the vector shuffle as the input operand, and that vector shuffle is fed by
one or more build_vector nodes. By the time that vector operations are
expanded, visitEXTRACT_VECTOR_ELT will not create new extract_vector_elt by
looking through the vector shuffle (to make sure that no illegal operations are
created), and so the extract_vector_elt -> vector shuffle -> build_vector is
never simplified to an operand of the build vector.
By looking at build_vectors through a shuffle we fix this particular situation,
preventing a vector from being built, only to be deconstructed again (for the
scalarized add) -- an expensive proposition when this all needs to be done via
the stack. We probably want a more comprehensive fix here where we look back
recursively through any shuffles to any build_vectors or scalar_to_vectors,
etc. but that can come later.
llvm-svn: 205179
While reviewing r204163, I noticed that the MIPS16 test only checked for a .ent
directive and didn't actually check the code emitted. Fixed this and added a
check for llvm.bswap.i32 on MIPS64 at the same time.
llvm-svn: 205177
is not a pattern to lower this with clever instructions that zero the
register, so restrict the zero immediate legality special case to f64
and f32 (the only two sizes which fmov seems to directly support). Fixes
backend errors when building code such as libxml.
llvm-svn: 205161
When expanding EXTRACT_VECTOR_ELT and EXTRACT_SUBVECTOR using
SelectionDAGLegalize::ExpandExtractFromVectorThroughStack, we store the entire
vector and then load the piece we want. This is fine in isolation, but
generating a new store (and corresponding stack slot) for each extraction ends
up producing code of poor quality. When we scalarize a vector operation (using
SelectionDAG::UnrollVectorOp for example) we generate one EXTRACT_VECTOR_ELT
for each element in the vector. This used to generate one stored copy of the
vector for each element in the vector. Now we search the uses of the vector for
a suitable store before generating a new one, which results in much more
efficient scalarization code.
llvm-svn: 205153
sitofp from v2i32 to v2f64 ends up generating a SIGN_EXTEND_INREG v2i64 node
(and similarly for v2i16 and v2i8). Even though there are no sign-extension (or
algebraic shifts) for v2i64 types, we can handle v2i32 sign extensions by
converting two and from v2i64. The small trick necessary here is to shift the
i32 elements into the right lanes before the i32 -> f64 step. This is because
of the big Endian nature of the system, we need the i32 portion in the high
word of the i64 elements.
For v2i16 and v2i8 we can do the same, but we first use the default Altivec
shift-based expansion from v2i16 or v2i8 to v2i32 (by casting to v4i32) and
then apply the above procedure.
llvm-svn: 205146
v2i64 is a legal type under VSX, however we don't have native vector
comparisons. We can handle eq/ne by casting it to an Altivec type, but
everything else must be expanded.
llvm-svn: 205106
This adds a second implementation of the AArch64 architecture to LLVM,
accessible in parallel via the "arm64" triple. The plan over the
coming weeks & months is to merge the two into a single backend,
during which time thorough code review should naturally occur.
Everything will be easier with the target in-tree though, hence this
commit.
llvm-svn: 205090
We had stored both f64 values and v2f64, etc. values in the VSX registers. This
worked, but was suboptimal because we would always spill 16-byte values even
through we almost always had scalar 8-byte values. This resulted in an
increase in stack-size use, extra memory bandwidth, etc. To fix this, I've
added 64-bit subregisters of the Altivec registers, and combined those with the
existing scalar floating-point registers to form a class of VSX scalar
floating-point registers. The ABI code has also been enhanced to use this
register class and some other necessary improvements have been made.
llvm-svn: 205075
Emit 32-bit register names instead of 64-bit register names if the target does
not have 64-bit general purpose registers.
<rdar://problem/14653996>
llvm-svn: 205067
WinCOFF cannot form PC relative relocations to support absolute
MCValues. We should reenable this once WinCOFF supports emission of
IMAGE_REL_I386_REL32 relocations.
This fixes PR19272.
llvm-svn: 205058
v2[fi]64 values need to be explicitly passed in VSX registers. This is because
the code in TRI that finds the minimal register class given a register and a
value type will assert if given an Altivec register and a non-Altivec type.
llvm-svn: 205041
As explained in r204976, because of how the allocation of VSX registers
interacts with the call-lowering code, we sometimes end up generating self VSX
copies. Specifically, things like this:
%VSL2<def> = COPY %F2, %VSL2<imp-use,kill>
(where %F2 is really a sub-register of %VSL2, and so this copy is a nop)
This adds a small cleanup pass to remove these prior to post-RA scheduling.
llvm-svn: 204980
First, v2f64 vector extract had not been declared legal (and so the existing
patterns were not being used). Second, the patterns for that, and for
scalar_to_vector, should really be a regclass copy, not a subregister
operation, because the VSX registers directly hold both the vector and scalar data.
llvm-svn: 204971
These operations need to be expanded during legalization so that isel does not
crash. In theory, we might be able to custom lower some of these. That,
however, would need to be follow-up work.
llvm-svn: 204963
This adds back r204781.
Original message:
Aliases are just another name for a position in a file. As such, the
regular symbol resolutions are not applied. For example, given
define void @my_func() {
ret void
}
@my_alias = alias weak void ()* @my_func
@my_alias2 = alias void ()* @my_alias
We produce without this patch:
.weak my_alias
my_alias = my_func
.globl my_alias2
my_alias2 = my_alias
That is, in the resulting ELF file my_alias, my_func and my_alias are
just 3 names pointing to offset 0 of .text. That is *not* the
semantics of IR linking. For example, linking in a
@my_alias = alias void ()* @other_func
would require the strong my_alias to override the weak one and
my_alias2 would end up pointing to other_func.
There is no way to represent that with aliases being just another
name, so the best solution seems to be to just disallow it, converting
a miscompile into an error.
llvm-svn: 204934
These instructions have access to the complete VSX register file. In addition,
they "swap" the order of the elements so that element 0 (the scalar part) comes
first in memory and element 1 follows at a higher address.
llvm-svn: 204838
In some cases it is possible for CGP to attempt to reuse a base address from
another basic block. In those cases we have to be sure that all the address
math was either done at the same bit width, or that none of it overflowed
before it was extended.
Patch by Louis Gerbarg <lgg@apple.com>
rdar://16307442
llvm-svn: 204833
> For functions where esi is used as base pointer, we would previously fall ba
> from lowering memcpy with "rep movs" because that clobbers esi.
>
> With this patch, we just store esi in another physical register, and restore
> it afterwards. This adds a little bit of register preassure, but the more
> efficient memcpy should be worth it.
>
> Differential Revision: http://llvm-reviews.chandlerc.com/D2968
This didn't work. I was ending up with code like this:
lea edi,[esi+38h]
mov ecx,0Fh
mov edx,esi
mov esi,ebx
rep movs dword ptr es:[edi],dword ptr [esi]
lea ecx,[esi+74h] <-- Ooops, we're now using esi before restoring it from edx.
add ebx,3Ch
mov esi,edx
I guess if we want to do this we need stronger glue or something, or doing the expansion
much later.
llvm-svn: 204829
v2i64 needs to be a legal VSX type because it is the SetCC result type from
v2f64 comparisons. We need to expand all non-arithmetic v2i64 operations.
This fixes the lowering for v2f64 VSELECT.
llvm-svn: 204828
We've already got versions without the barriers, so this just adds IR-level
support for generating the new v8 ones.
rdar://problem/16227836
llvm-svn: 204813
Implementing the LLVM part of the call to __builtin___clear_cache
which translates into an intrinsic @llvm.clear_cache and is lowered
by each target, either to a call to __clear_cache or nothing at all
incase the caches are unified.
Updating LangRef and adding some tests for the implemented architectures.
Other archs will have to implement the method in case this builtin
has to be compiled for it, since the default behaviour is to bail
unimplemented.
A Clang patch is required for the builtin to be lowered into the
llvm intrinsic. This will be done next.
llvm-svn: 204802
With VSX there is a real vector select instruction, and so we should use it.
Note that VSELECT will still scalarize for v2f64 because the corresponding
SetCC result type (v2i64) is not currently a legal type.
llvm-svn: 204801
This reverts commit r204781.
I will follow up to with msan folks to see what is what they
were trying to do with aliases to weak aliases.
llvm-svn: 204784
Aliases are just another name for a position in a file. As such, the
regular symbol resolutions are not applied. For example, given
define void @my_func() {
ret void
}
@my_alias = alias weak void ()* @my_func
@my_alias2 = alias void ()* @my_alias
We produce without this patch:
.weak my_alias
my_alias = my_func
.globl my_alias2
my_alias2 = my_alias
That is, in the resulting ELF file my_alias, my_func and my_alias are
just 3 names pointing to offset 0 of .text. That is *not* the
semantics of IR linking. For example, linking in a
@my_alias = alias void ()* @other_func
would require the strong my_alias to override the weak one and
my_alias2 would end up pointing to other_func.
There is no way to represent that with aliases being just another
name, so the best solution seems to be to just disallow it, converting
a miscompile into an error.
llvm-svn: 204781
Adds the different broadcast instructions to the ReplaceableInstrsAVX2 table.
That way the ExeDepsFix pass can take better decisions when AVX2 broadcasts are
across domain (int <-> float).
In particular, prior to this patch we were generating:
vpbroadcastd LCPI1_0(%rip), %ymm2
vpand %ymm2, %ymm0, %ymm0
vmaxps %ymm1, %ymm0, %ymm0 ## <- domain change penalty
Now, we generate the following nice sequence where everything is in the float
domain:
vbroadcastss LCPI1_0(%rip), %ymm2
vandps %ymm2, %ymm0, %ymm0
vmaxps %ymm1, %ymm0, %ymm0
<rdar://problem/16354675>
llvm-svn: 204770
The VSX instruction set has two types of FMA instructions: A-type (where the
addend is taken from the output register) and M-type (where one of the product
operands is taken from the output register). This adds a small pass that runs
just after MI scheduling (and, thus, just before register allocation) that
mutates A-type instructions (that are created during isel) into M-type
instructions when:
1. This will eliminate an otherwise-necessary copy of the addend
2. One of the product operands is killed by the instruction
The "right" moment to make this decision is in between scheduling and register
allocation, because only there do we know whether or not one of the product
operands is killed by any particular instruction. Unfortunately, this also
makes the implementation somewhat complicated, because the MIs are not in SSA
form and we need to preserve the LiveIntervals analysis.
As a simple example, if we have:
%vreg5<def> = COPY %vreg9; VSLRC:%vreg5,%vreg9
%vreg5<def,tied1> = XSMADDADP %vreg5<tied0>, %vreg17, %vreg16,
%RM<imp-use>; VSLRC:%vreg5,%vreg17,%vreg16
...
%vreg9<def,tied1> = XSMADDADP %vreg9<tied0>, %vreg17, %vreg19,
%RM<imp-use>; VSLRC:%vreg9,%vreg17,%vreg19
...
We can eliminate the copy by changing from the A-type to the
M-type instruction. This means:
%vreg5<def,tied1> = XSMADDADP %vreg5<tied0>, %vreg17, %vreg16,
%RM<imp-use>; VSLRC:%vreg5,%vreg17,%vreg16
is replaced by:
%vreg16<def,tied1> = XSMADDMDP %vreg16<tied0>, %vreg18, %vreg9,
%RM<imp-use>; VSLRC:%vreg16,%vreg18,%vreg9
and we remove: %vreg5<def> = COPY %vreg9; VSLRC:%vreg5,%vreg9
llvm-svn: 204768
This used to resort to splitting the 256-bit operation into two 128-bit
shuffles and then recombining the results.
Fixes <rdar://problem/16167303>
llvm-svn: 204735
This is a pretty straight forward translation for COFF, we just need to
stick the data in a COMDAT section marked as
IMAGE_COMDAT_SELECT_NODUPLICATES.
N.B. We must be careful to avoid sticking entities with private linkage
in COMDAT groups. COFF is pretty hostile to the renaming of entities so
we must be careful to disallow GlobalVariables with unstable names.
llvm-svn: 204703
When register allocator's stage is RS_Spill, we choose spill over using the CSR
for the first time, if the spill cost is lower than CSRCost.
When register allocator's stage is < RS_Split, we choose pre-splitting over
using the CSR for the first time, if the cost of splitting is lower than
CSRCost.
CSRCost is set with command-line option "regalloc-csr-first-time-cost". The
default value is 0 to generate the same codes as before this commit.
With a value of 15 (1 << 14 is the entry frequency), I measured performance
gain of 3% on 253.perlbmk and 1.7% on 197.parser, with instrumented PGO,
on an arm device.
rdar://16162005
llvm-svn: 204690
Try to match scalar and first like the other instructions.
Expand 64-bit ands to a pair of 32-bit ands since that is not
available on the VALU.
llvm-svn: 204660
Those patterns are used when the load cannot be folded into the related broadcast
during the select phase.
This happens when the load gets additional uses that were not anticipated during
the previous lowering phases (constant vector to constant load, then constant
load reused) or when selection DAG is not able to prove that folding the load
will not create a cycle in the DAG.
<rdar://problem/16074331>
llvm-svn: 204631
This is a pretty straight forward translation for COFF, we just need to
stick the function in a COMDAT section marked as
IMAGE_COMDAT_SELECT_NODUPLICATES.
llvm-svn: 204565
When VSX is available, these instructions should be used in preference to the
older variants that only have access to the scalar floating-point registers.
llvm-svn: 204559
This patch renames method 'isConstantSplat' as 'getConstantSplatValue'
(mainly for consistency reasons), and rewrites its logic to ensure
that we always perform a legal 'cast<ConstantSDNode>'.
Added test shift-combine-crash.ll to verify that DAGCombiner no longer crashes with an assertion failure in the attempt to simplify a vector shift by a vector of all undef counts.
llvm-svn: 204536
We make sure a spill is not hoisted to a hotter outer loop by adding
a condition. Hoist a spill to outer loop if there are multiple dependents
(it can be beneficial if more than one dependents are hoisted) or
if DepSV (the hoisting source) is hotter than SV (the hoisting destination).
rdar://16268194
llvm-svn: 204522
Previously, only regular AArch64 instructions were annotated with SchedRW lists.
This patch does the same for NEON enabling these instructions to be scheduled by
the MIScheduler. Additionally, store operations are now modeled and a few
SchedRW lists were updated for bug fixes (e.g. multiple def operands).
Reviewers: apazos, mcrosier, atrick
Patch by Dave Estes <cestes@codeaurora.org>!
llvm-svn: 204505
Summary:
VECTOR_SHUFFLE concatenates the vectors in an vectorwise fashion.
<0b00, 0b01> + <0b10, 0b11> -> <0b00, 0b01, 0b10, 0b11>
VSHF concatenates the vectors in a bitwise fashion:
<0b00, 0b01> + <0b10, 0b11> ->
0b0100 + 0b1110 -> 0b01001110
<0b10, 0b11, 0b00, 0b01>
We must therefore swap the operands to get the correct result.
The test case that discovered the issue was MultiSource/Benchmarks/nbench.
Reviewers: matheusalmeida
Reviewed By: matheusalmeida
Differential Revision: http://llvm-reviews.chandlerc.com/D3142
llvm-svn: 204480
Extend the target hook to take also the operand index into account when
calculating the cost of the constant materialization.
Related to <rdar://problem/16381500>
llvm-svn: 204435
.data_region is only used in Darwin, so it shouldn't be generated
for other OS. Currently AArch64 doesn't support darwin yet, so
I removed it from AArch64. When Darwin is supported someday, we can
add it back and associate it with Darwin.
llvm-svn: 204424
Sicne MBB->computeRegisterLivenes() returns Dead for sub regs like s0,
d0 is used in vpop instead of updating sp, which causes s0 dead before
its use.
This patch checks the liveness of each subreg to make sure the reg is
actually dead.
llvm-svn: 204411
This commit extends the coverage of the constant hoisting pass, adds additonal
debug output and updates the function names according to the style guide.
Related to <rdar://problem/16381500>
llvm-svn: 204389
The Octeon cpu from Cavium Networks is mips64r2 based and has an extended
instruction set. In order to utilize this with LLVM, a new cpu feature "octeon"
and a subtarget feature "cnmips" is added. A small set of new instructions
(baddu, dmul, pop, dpop, seq, sne) is also added. LLVM generates dmul, pop and
dpop instructions with option -mcpu=octeon or -mattr=+cnmips.
llvm-svn: 204337
It isn't actually used now, and probably never will be, plus it makes
tests less annoying. I also think SC prints GDS instructions as a
separate instruction name.
llvm-svn: 204270
The "noduplicate" function attribute exists to prevent certain optimizations
from duplicating calls to the function. This is important on platforms where
certain function call duplications are unsafe (for example execution barriers
for CUDA and OpenCL).
This patch makes it possible to specify intrinsics as "noduplicate" and
translates that to the appropriate function attribute.
llvm-svn: 204200
For functions where esi is used as base pointer, we would previously fall back
from lowering memcpy with "rep movs" because that clobbers esi.
With this patch, we just store esi in another physical register, and restore
it afterwards. This adds a little bit of register preassure, but the more
efficient memcpy should be worth it.
Differential Revision: http://llvm-reviews.chandlerc.com/D2968
llvm-svn: 204174
Summary:
SLP Vectorization of intrinsics (r203707) has exposed cases where the
expansion of vector bswap is failing (PR19151).
Reviewers: hfinkel
CC: chandlerc
Differential Revision: http://llvm-reviews.chandlerc.com/D3104
llvm-svn: 204163
When converting a signed 32-bit integer to double-precision floating point on
hardware without a lfiwax instruction, we have to instead use a lfd followed
by fcfid. We were erroneously offsetting the address by 4 bytes in
preparation for either a lfiwax or lfiwzx when generating the lfd. This fixes
that silly error.
This was not caught in the test suite since the conversion tests were run with
-mcpu=pwr7, which implies availability of lfiwax. I've added another test
case for older hardware that checks the code we expect in the absence of
lfiwax and other flavors of fcfid. There are fewer tests in this test case
because we punt to DAG selection in more cases on older hardware. (We must
generate complex fiddly sequences in those cases, and there is marginal
benefit in duplicating that logic in fast-isel.)
llvm-svn: 204155
Rather than LegalizeAction::Expand, this needs LegalizeAction::Promote to get
promoted to fp_to_sint v8f32->v8i32. This is a legal operation on AVX.
For that to work properly, we also need to teach the legalizer about the
specific promotion required here. The default vector promotion uses
bitcasting to a vector type of the same total size. We want to promote the
vector element type, effectively widening the operation and then truncating
the result. This is analogous to the current logic of how int_to_fp is
promoted.
The change also factors out some code from the int_to_fp promotion code to
ValueType::widenIntegerVectorElementType. This is now shared between
int_to_fp and fp_to_int.
There is no longer need for the custom lowering of fp_to_sint f32->v8i16 in
X86. It can now go through the new target-independent fp_to_*int promotion
logic.
I also checked that no other target uses Promote for these ops yet, so there
shouldn't be any unexpected change in behavior.
Fixes <rdar://problem/16202247>
llvm-svn: 204058
The type of the immediates should not matter as long as the encoding is
equivalent to the encoding of one of the legal inline constants.
Tested-by: Michel Dänzer <michel.daenzer@amd.com>
llvm-svn: 204056
This instructions writes to an 32-bit SGPR. This change required adding
the 32-bit VCC_LO and VCC_HI registers, because the full VCC register
is 64 bits.
This fixes verifier errors on several of the indirect addressing piglit
tests.
Tested-by: Michel Dänzer <michel.daenzer@amd.com>
llvm-svn: 204055
- Adds support for inserting vzerouppers before tail-calls.
This is enabled implicitly by having MachineInstr::copyImplicitOps preserve
regmask operands, which allows VZeroUpperInserter to see where tail-calls use
vector registers.
- Fixes a bug that caused the previous version of this optimization to miss some
vzeroupper insertion points in loops. (Loops-with-vector-code that followed
loops-without-vector-code were mistakenly overlooked by the previous version).
- New algorithm never revisits instructions.
Fixes <rdar://problem/16228798>
llvm-svn: 204021
Commit r181723 introduced code to avoid placing initialized variables
needing relocations into the .rodata section, which avoid copy relocs
that do not work as expected on ppc64 function references.
The same treatment is also needed for *named* .rodata.XXX sections.
This patch changes PPC64LinuxTargetObjectFile::SelectSectionForGlobal
to modify "Kind" *before* calling the default SelectSectionForGlobal
routine, instead of first calling the default routine and then just
checking for the (main) .rodata section afterwards.
llvm-svn: 203921
These linkages were introduced some time ago, but it was never very
clear what exactly their semantics were or what they should be used
for. Some investigation found these uses:
* utf-16 strings in clang.
* non-unnamed_addr strings produced by the sanitizers.
It turns out they were just working around a more fundamental problem.
For some sections a MachO linker needs a symbol in order to split the
section into atoms, and llvm had no idea that was the case. I fixed
that in r201700 and it is now safe to use the private linkage. When
the object ends up in a section that requires symbols, llvm will use a
'l' prefix instead of a 'L' prefix and things just work.
With that, these linkages were already dead, but there was a potential
future user in the objc metadata information. I am still looking at
CGObjcMac.cpp, but at this point I am convinced that linker_private
and linker_private_weak are not what they need.
The objc uses are currently split in
* Regular symbols (no '\01' prefix). LLVM already directly provides
whatever semantics they need.
* Uses of a private name (start with "\01L" or "\01l") and private
linkage. We can drop the "\01L" and "\01l" prefixes as soon as llvm
agrees with clang on L being ok or not for a given section. I have two
patches in code review for this.
* Uses of private name and weak linkage.
The last case is the one that one could think would fit one of these
linkages. That is not the case. The semantics are
* the linker will merge these symbol by *name*.
* the linker will hide them in the final DSO.
Given that the merging is done by name, any of the private (or
internal) linkages would be a bad match. They allow llvm to rename the
symbols, and that is really not what we want. From the llvm point of
view, these objects should really be (linkonce|weak)(_odr)?.
For now, just keeping the "\01l" prefix is probably the best for these
symbols. If we one day want to have a more direct support in llvm,
IMHO what we should add is not a linkage, it is just a hidden_symbol
attribute. It would be applicable to multiple linkages. For example,
on weak it would produce the current behavior we have for objc
metadata. On internal, it would be equivalent to private (and we
should then remove private).
llvm-svn: 203866
This patch fixes the bug in peephole optimization that folds a load which defines one vreg into the one and only use of that vreg. With debug info, a DBG_VALUE that referenced the vreg considered to be a use, preventing the optimization. The fix is to ignore DBG_VALUE's during the optimization, and undef a DBG_VALUE that references a vreg that gets removed.
Patch by Trevor Smigiel!
llvm-svn: 203829
LDS instructions are pseudo instructions which model
the OQAP defs and uses within a single instruction.
This fixes a hang in the opencv MedianFilter tests.
llvm-svn: 203818
This option enables LowerInvoke's obsolete SJLJ EH support, but the
target used in this test (ARM Darwin) no longer uses the LowerInvoke
pass, so the option has no effect here. This target currently uses
the newer SjLjEHPrepare pass instead.
This cleanup will help with removing "-enable-correct-eh-support".
Differential Revision: http://llvm-reviews.chandlerc.com/D3064
llvm-svn: 203810
This is a follow-up to r203635. Saleem pointed out that since symbolic register
names are much easier to read, it would be good if we could turn them off only
when we really need to because we're using an external assembler.
Differential Revision: http://llvm-reviews.chandlerc.com/D3056
llvm-svn: 203806
Summary:
This helps the instruction selector to lower an i64 * i64 -> i128
multiplication into a single instruction on targets which support it.
This is an update of D2973 which was reverted because of a bug reported
as PR19084.
Reviewers: t.p.northover, chapuni
Reviewed By: t.p.northover
CC: llvm-commits, alex, chapuni
Differential Revision: http://llvm-reviews.chandlerc.com/D3021
llvm-svn: 203797
VSX is an ISA extension supported on the POWER7 and later cores that enhances
floating-point vector and scalar capabilities. Among other things, this adds
<2 x double> support and generally helps to reduce register pressure.
The interesting part of this ISA feature is the register configuration: there
are 64 new 128-bit vector registers, the 32 of which are super-registers of the
existing 32 scalar floating-point registers, and the second 32 of which overlap
with the 32 Altivec vector registers. This makes things like vector insertion
and extraction tricky: this can be free but only if we force a restriction to
the right register subclass when needed. A new "minipass" PPCVSXCopy takes care
of this (although it could do a more-optimal job of it; see the comment about
unnecessary copies below).
Please note that, currently, VSX is not enabled by default when targeting
anything because it is not yet ready for that. The assembler and disassembler
are fully implemented and tested. However:
- CodeGen support causes miscompiles; test-suite runtime failures:
MultiSource/Benchmarks/FreeBench/distray/distray
MultiSource/Benchmarks/McCat/08-main/main
MultiSource/Benchmarks/Olden/voronoi/voronoi
MultiSource/Benchmarks/mafft/pairlocalalign
MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4
SingleSource/Benchmarks/CoyoteBench/almabench
SingleSource/Benchmarks/Misc/matmul_f64_4x4
- The lowering currently falls back to using Altivec instructions far more
than it should. Worse, there are some things that are scalarized through the
stack that shouldn't be.
- A lot of unnecessary copies make it past the optimizers, and this needs to
be fixed.
- Many more regression tests are needed.
Normally, I'd fix these things prior to committing, but there are some
students and other contributors who would like to work this, and so it makes
sense to move this development process upstream where it can be subject to the
regular code-review procedures.
llvm-svn: 203768
Extend what's currently done for shift because the HW performs this masking
implicitly:
(rotl:i32 x, (and y, 31)) -> (rotl:i32 x, y)
I use the newly factored out multiclass that was only supporting shifts so
far.
For testing I extended my testcase for the new rotation idiom.
<rdar://problem/15295856>
llvm-svn: 203718
On ELF and COFF an alias is just another name for a position in the file.
There is no way to refer to a position in another file, so an alias to
undefined is meaningless.
MachO currently doesn't support aliases. The spec has a N_INDR, which when
implemented will have a different set of restrictions. Adding support for
it shouldn't be harder than any other IR extension.
For now, having the IR represent what is actually possible with current
tools makes it easier to fix the design of GlobalAlias.
llvm-svn: 203705
Summary:
Correct the match patterns and the lowerings that made the CodeGen tests pass despite the mistakes.
The original testcase that discovered the problem was SingleSource/UnitTests/SignlessType/factor.c in test-suite.
During review, we also found that some of the existing CodeGen tests were incorrect and fixed them:
* bitwise.ll: In bsel_v16i8 the IfSet/IfClear were reversed because bsel and bmnz have different operand orders and the test didn't correctly account for this. bmnz goes 'IfClear, IfSet, CondMask', while bsel goes 'CondMask, IfClear, IfSet'.
* vec.ll: In the cases where a bsel is emitted as a bmnz (they are the same operation with a different input tied to the result) the operands were in the wrong order.
* compare.ll and compare_float.ll: The bsel operand order was correct for a greater-than comparison, but a greater-than comparison instruction doesn't exist. Lowering this operation inverts the condition so the IfSet/IfClear need to be swapped to match.
The differences between BSEL, BMNZ, and BMZ and how they map to/from vselect are rather confusing. I've therefore added a note to MSA.txt to explain this in a single place in addition to the comments that explain each case.
Reviewers: matheusalmeida, jacksprat
Reviewed By: matheusalmeida
Differential Revision: http://llvm-reviews.chandlerc.com/D3028
llvm-svn: 203657
When the list of VFP registers to be saved was non-contiguous (so multiple
vpush/vpop instructions were needed) these were being ordered oddly, as in:
vpush {d8, d9}
vpush {d11}
This led to the layout in memory being [d11, d8, d9] which is ugly and doesn't
match the CFI_INSTRUCTIONs we're generating either (so Dwarf info would be
broken).
This switches the order of vpush/vpop (in both prologue and epilogue,
obviously) so that the Dwarf locations are correct again.
rdar://problem/16264856
llvm-svn: 203655
It seems gas can't handle CFI directives with VFP register names ("d12", etc.).
This broke us trying to build Chromium for Android after 201423.
A gas bug has been filed: https://sourceware.org/bugzilla/show_bug.cgi?id=16694
compnerd suggested making this conditional on whether we're using the integrated
assembler or not. I'll look into that in a follow-up patch.
Differential Revision: http://llvm-reviews.chandlerc.com/D3049
llvm-svn: 203635
This fixes the bug where we would bitcast the 64-bit floating point result
of cmpneqsd to a 64-bit integer even on 32-bit targets.
Differential Revision: http://llvm-reviews.chandlerc.com/D3009
llvm-svn: 203581
Use the options in the ARMISelLowering to control whether tail calls are
optimised or not. Previously, this option was entirely ignored on the ARM
target and only honoured on x86.
This option is mostly useful in profiling scenarios. The default remains that
tail call optimisations will be applied.
llvm-svn: 203577
This option is from 2010, designed to work around a linker issue on Darwin for
ARM. According to grosbach this is no longer an issue and this option can
safely be removed.
llvm-svn: 203576
Tail call optimisation was previously disabled on all targets other than
iOS5.0+. This enables the tail call optimisation on all Thumb 2 capable
platforms.
The test adjustments are to remove the IR hint "tail" to function invocation.
The tests were designed assuming that tail call optimisations would not kick in
which no longer holds true.
llvm-svn: 203575
The syntax for "cmpxchg" should now look something like:
cmpxchg i32* %addr, i32 42, i32 3 acquire monotonic
where the second ordering argument gives the required semantics in the case
that no exchange takes place. It should be no stronger than the first ordering
constraint and cannot be either "release" or "acq_rel" (since no store will
have taken place).
rdar://problem/15996804
llvm-svn: 203559
When the MOVBE instructions are available, use them for 16-bit endian
swapping as well as for 32 and 64 bit.
The patterns were already present on the instructions, but weren't being
matched because the operation was unconditionally marked to 'Expand.'
Change that to be conditional on whether the MOVBE instructions are
available. Use 'rolw' to implement the in-register version (32 and 64
bit have the dedicated 'bswap' instruction for that).
Patch by Louis Gerbarg <lgg@apple.com>.
rdar://15479984
llvm-svn: 203524
* Add masking instructions before loads and stores (in MC layer).
* Add masking instructions after SP changes (in MC layer).
* Forbid loads, stores and SP changes in delay slots (in MI layer).
Differential Revision: http://llvm-reviews.chandlerc.com/D2904
llvm-svn: 203484
The function was making too many assumptions about its input:
1. The NEON_VDUP optimisation was far too aggressive, assuming (I
think) that the input would always be BUILD_VECTOR.
2. We were treating most unknown concats as legal (by returning Op
rather than SDValue()). I think only concats of pairs of vectors are
actually legal.
http://llvm.org/PR19094
llvm-svn: 203450
The grammar for LLVM IR is not well specified in any document but seems
to obey the following rules:
- Attributes which have parenthesized arguments are never preceded by
commas. This form of attribute is the only one which ever has
optional arguments. However, not all of these attributes support
optional arguments: 'thread_local' supports an optional argument but
'addrspace' does not. Interestingly, 'addrspace' is documented as
being a "qualifier". What constitutes a qualifier? I cannot find a
definition.
- Some attributes use a space between the keyword and the value.
Examples of this form are 'align' and 'section'. These are always
preceded by a comma.
- Otherwise, the attribute has no argument. These attributes do not
have a preceding comma.
Sometimes an attribute goes before the instruction, between the
instruction and it's type, or after it's type. 'atomicrmw' has
'volatile' between the instruction and the type while 'call' has 'tail'
preceding the instruction.
With all this in mind, it seems most consistent for 'inalloca' on an
'inalloca' instruction to occur before between the instruction and the
type. Unlike the current formulation, there would be no preceding
comma. The combination 'alloca inalloca' doesn't look particularly
appetizing, perhaps a better spelling of 'inalloca' is down the road.
llvm-svn: 203376
This is the new idiom:
x<<(y&31) | x>>((0-y)&31)
which is recognized as:
x ROTL (y&31)
The change refines matchRotateSub. In
Neg & (OpSize - 1) == (OpSize - Pos) & (OpSize - 1), if Pos is
Pos' & (OpSize - 1) we can just use Pos' instead of Pos.
llvm-svn: 203315
be split and the result type widened.
When the condition of a vselect has to be split it makes no sense widening the
vselect and thereby widening the condition. We end up in an endless loop of
widening (vselect result type) and splitting (condition mask type) doing this.
Instead, split both the condition and the vselect and widen the result.
I ran this over the test suite with i686 and mattr=+sse and saw no regressions.
Fixes PR18036.
llvm-svn: 203311
These are sometimes created by the shrink to boolean optimization in the
globalopt pass.
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
llvm-svn: 203280
This helps the instruction selector to lower an i64 * i64 -> i128
multiplication into a single instruction on targets which support it.
Patch by Manuel Jacob.
llvm-svn: 203230
The old system was fairly convoluted:
* A temporary label was created.
* A single PROLOG_LABEL was created with it.
* A few MCCFIInstructions were created with the same label.
The semantics were that the cfi instructions were mapped to the PROLOG_LABEL
via the temporary label. The output position was that of the PROLOG_LABEL.
The temporary label itself was used only for doing the mapping.
The new CFI_INSTRUCTION has a 1:1 mapping to MCCFIInstructions and points to
one by holding an index into the CFI instructions of this function.
I did consider removing MMI.getFrameInstructions completelly and having
CFI_INSTRUCTION own a MCCFIInstruction, but MCCFIInstructions have non
trivial constructors and destructors and are somewhat big, so the this setup
is probably better.
The net result is that we don't create temporary labels that are never used.
llvm-svn: 203204
This patch teaches the DAGCombiner how to fold a binary OR between two
shufflevector into a single shuffle vector when possible.
The rules are:
1. fold (or (shuf A, V_0, MA), (shuf B, V_0, MB)) -> (shuf A, B, Mask1)
2. fold (or (shuf A, V_0, MA), (shuf B, V_0, MB)) -> (shuf B, A, Mask2)
The DAGCombiner can take advantage of the fact that OR is commutative and
compute two possible shuffle masks (Mask1 and Mask2) for the resulting
shuffle node.
Before folding a dag according to either rule 1 or 2, DAGCombiner verifies
that the resulting shuffle mask is legal for the target.
DAGCombiner would firstly try to fold according to 1.; If not possible
then it will try to fold according to 2.
If both Mask1 and Mask2 are illegal then we conservatively don't fold
the OR instruction.
llvm-svn: 203156
Summary:
This provides support for CP and DP relative global accesses in inline
asm.
Reviewers: robertlytton
Reviewed By: robertlytton
Differential Revision: http://llvm-reviews.chandlerc.com/D2943
llvm-svn: 203129
for the Cortex-A53 subtarget in the AArch64 backend.
This patch lays the ground work to annotate each AArch64 instruction
(no NEON yet) with a list of SchedReadWrite types. The patch also
provides the Cortex-A53 processor resources, maps those the the default
SchedReadWrites, and provides basic latency. NEON support will be added
in a subsequent patch with proper forwarding logic.
Verification was done by setting the pre-RA scheduler to linearize to
better gauge the effect of the MIScheduler. Even without modeling the
forward logic, the results show a modest improvement for Cortex-A53.
Reviewers: apazos, mcrosier, atrick
Patch by Dave Estes <cestes@codeaurora.org>!
llvm-svn: 203125
When copying an i1 value into a GPR for a vaarg call, we need to explicitly
zero-extend the i1 value (otherwise an invalid CRBIT -> GPR copy will be
generated).
llvm-svn: 203041
On cores without fpcvt support, we cannot promote int_to_fp i1 operations,
because there is nothing to promote them to. The most straightforward
implementation of this uses a select to choose between the two possible
resulting floating-point values (and that's what is done here).
llvm-svn: 203015
Before llvm-mc would print it, but llc was assuming that it would produce
another section changing directive before one was needed. That assumption is
false with inline asm.
Fixes PR19049.
Another option would be to always create the section, but in the asm printer
avoid printing sections changes during initialization. That would work, but
* We do use the fact that llvm-mc prints it in testing. The tests can be changed
if needed.
* A quick poll on IRC suggest that most developers prefer the implicit .text to
be printed.
llvm-svn: 203001
Patchpoints already did this. Doing it for stackmaps is a convenience
for the runtime in the event that it needs to scratch register to
patch or perform a runtime call thunk.
Unlike patchpoints, we just assume the AnyRegCC calling
convention. This is the only language and target independent calling
convention specific to stackmaps so makes sense. Although the calling
convention is not currently used to select the scratch registers.
llvm-svn: 202943
selection dag (PR19012)
In X86SelectionDagInfo::EmitTargetCodeForMemcpy we check with MachineFrameInfo
to make sure that ESI isn't used as a base pointer register before we choose to
emit rep movs (which clobbers esi).
The problem is that MachineFrameInfo wouldn't know about dynamic allocas or
inline asm that clobbers the stack pointer until SelectionDAGBuilder has
encountered them.
This patch fixes the problem by checking for such things when building the
FunctionLoweringInfo.
Differential Revision: http://llvm-reviews.chandlerc.com/D2954
llvm-svn: 202930
Previously for:
tail call void inttoptr (i64 65536 to void ()*)() nounwind
We would emit:
bl 65536
The immediate operand of the bl instruction is a relative offset so it is
wrong to use the absolute address here.
llvm-svn: 202860
Summary:
Previously, attempting to extract lanes 2 and 3 would actually extract lane 1.
The MSA CodeGen tests only covered lanes 0 and 1.
Differential Revision: http://llvm-reviews.chandlerc.com/D2935
llvm-svn: 202848
for the Cortex-A53 subtarget in the AArch64 backend.
This patch lays the ground work to annotate each AArch64 instruction
(no NEON yet) with a list of SchedReadWrite types. The patch also
provides the Cortex-A53 processor resources, maps those the the default
SchedReadWrites, and provides basic latency. NEON support will be added
in a subsequent patch with proper forwarding logic.
Verification was done by setting the pre-RA scheduler to linearize to
better gauge the effect of the MIScheduler. Even without modeling the
forward logic, the results show a modest improvement for Cortex-A53.
Reviewers: apazos, mcrosier, atrick
Patch by Dave Estes <cestes@codeaurora.org>!
llvm-svn: 202767
Summary:
Parts of the compiler still believed MSA load/stores have a 16-bit offset when
it is actually 10-bit. Corrected this, and fixed a closely related issue this
uncovered where load/stores with 10-bit and 12-bit offsets (MSA and microMIPS
respectively) could not load/store using offsets from the stack/frame pointer.
They accepted frameindex+offset, but not frameindex by itself.
Reviewers: jacksprat, matheusalmeida
Reviewed By: jacksprat
Differential Revision: http://llvm-reviews.chandlerc.com/D2888
llvm-svn: 202717
Now that the PowerPC backend can track individual CR bits as first-class
registers, we should also have a way of allocating them for inline asm
statements. Because these registers are only one bit, if an output variable is
implicitly cast to a larger integer size, we'll get an any_extend to that
larger type (this is part of the existing target-independent logic). As a
result, regardless of the size of the output type, only the first bit is
meaningful.
The constraint identifier "wc" has been chosen for this purpose. Although gcc
does not currently support allocating individual CR bits, this identifier
choice has been coordinated with the gcc PowerPC team, and will be marked as
reserved for this purpose in the gcc constraints.md file.
llvm-svn: 202657
This generalizes the code to eliminate extra truncs/exts around i1 bit
operations to also do the same on PPC64 for i32 bit operations. This eliminates
a fairly prevalent code wart:
int foo(int a) {
return a == 5 ? 7 : 8;
}
On PPC64, because of the extension implied by the ABI, this would generate:
cmplwi 0, 3, 5
li 12, 8
li 4, 7
isel 3, 4, 12, 2
rldicl 3, 3, 0, 32
blr
where the 'rldicl 3, 3, 0, 32', the extension, is completely unnecessary. At
least for the single-BB case (which is all that the DAG combine mechanism can
handle), this unnecessary extension is no longer generated.
llvm-svn: 202600
Inside iterate, we scan backwards then scan forwards in a loop. When iteration
is not zero, the last node was just updated so we can skip it. But when
iteration is zero, we can't skip the last node.
For the testing case, fixing this will save a spill and move register copies
from hot path to cold path.
llvm-svn: 202557
Tools that use the CommandLine library currently exit with an error
when invoked with -version or -help. This is unusual and non-standard,
so we'll fix them to exit successfully instead.
I don't expect that anyone relies on the current behaviour, so this
should be a fairly safe change.
llvm-svn: 202530
The PPC isel instruction can fold 0 into the first operand (thus eliminating
the need to materialize a zero-containing register when the 'true' result of
the isel is 0). When the isel is fed by a bit register operation that we can
invert, do so as part of the bit-register-operation peephole routine.
llvm-svn: 202469
This change enables tracking i1 values in the PowerPC backend using the
condition register bits. These bits can be treated on PowerPC as separate
registers; individual bit operations (and, or, xor, etc.) are supported.
Tracking booleans in CR bits has several advantages:
- Reduction in register pressure (because we no longer need GPRs to store
boolean values).
- Logical operations on booleans can be handled more efficiently; we used to
have to move all results from comparisons into GPRs, perform promoted
logical operations in GPRs, and then move the result back into condition
register bits to be used by conditional branches. This can be very
inefficient, because the throughput of these CR <-> GPR moves have high
latency and low throughput (especially when other associated instructions
are accounted for).
- On the POWER7 and similar cores, we can increase total throughput by using
the CR bits. CR bit operations have a dedicated functional unit.
Most of this is more-or-less mechanical: Adjustments were needed in the
calling-convention code, support was added for spilling/restoring individual
condition-register bits, and conditional branch instruction definitions taking
specific CR bits were added (plus patterns and code for generating bit-level
operations).
This is enabled by default when running at -O2 and higher. For -O0 and -O1,
where the ability to debug is more important, this feature is disabled by
default. Individual CR bits do not have assigned DWARF register numbers,
and storing values in CR bits makes them invisible to the debugger.
It is critical, however, that we don't move i1 values that have been promoted
to larger values (such as those passed as function arguments) into bit
registers only to quickly turn around and move the values back into GPRs (such
as happens when values are returned by functions). A pair of target-specific
DAG combines are added to remove the trunc/extends in:
trunc(binary-ops(binary-ops(zext(x), zext(y)), ...)
and:
zext(binary-ops(binary-ops(trunc(x), trunc(y)), ...)
In short, we only want to use CR bits where some of the i1 values come from
comparisons or are used by conditional branches or selects. To put it another
way, if we can do the entire i1 computation in GPRs, then we probably should
(on the POWER7, the GPR-operation throughput is higher, and for all cores, the
CR <-> GPR moves are expensive).
POWER7 test-suite performance results (from 10 runs in each configuration):
SingleSource/Benchmarks/Misc/mandel-2: 35% speedup
MultiSource/Benchmarks/Prolangs-C++/city/city: 21% speedup
MultiSource/Benchmarks/MiBench/automotive-susan: 23% speedup
SingleSource/Benchmarks/CoyoteBench/huffbench: 13% speedup
SingleSource/Benchmarks/Misc-C++/Large/sphereflake: 13% speedup
SingleSource/Benchmarks/Misc-C++/mandel-text: 10% speedup
SingleSource/Benchmarks/Misc-C++-EH/spirit: 10% slowdown
MultiSource/Applications/lemon/lemon: 8% slowdown
llvm-svn: 202451
scan the register file for sub- and super-registers.
No functionality change intended.
(Tests are updated because the comments in the assembler output are
different.)
llvm-svn: 202416
If a function returns a large struct by value return the first 4 words
in registers and the rest on the stack in a location reserved by the
caller. This is needed to support the xC language which supports
functions returning an arbitrary number of return values. This is
r202397 reapplied with a fix to avoid an uninitialized read of a member.
llvm-svn: 202414
Summary:
If a function returns a large struct by value return the first 4 words
in registers and the rest on the stack in a location reserved by the
caller. This is needed to support the xC language which supports
functions returning an arbitrary number of return values.
Reviewers: robertlytton
Reviewed By: robertlytton
CC: llvm-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D2889
llvm-svn: 202397
Summary:
If the src, dst and size of a memcpy are known to be 4 byte aligned we
can call __memcpy_4() instead of memcpy().
Reviewers: robertlytton
Reviewed By: robertlytton
CC: llvm-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D2871
llvm-svn: 202395
Summary:
Fixes an issue where a test attempts to use -mcpu=x86-64 on non-X86-64 targets.
This triggers an assertion in the MIPS backend since it doesn't know what ABI to
use by default for unrecognized processors.
CC: llvm-commits, rafael
Differential Revision: http://llvm-reviews.chandlerc.com/D2877
llvm-svn: 202369
If the SI_KILL operand is constant, we can either clear the exec mask if
the operand is negative, or do nothing otherwise.
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
llvm-svn: 202337
This handles pathological cases in which we see 2x increase in spill
code for large blocks (~50k instructions). I don't have a unit test
for this behavior.
Fixes rdar://16072279.
llvm-svn: 202304
The current approach to lower a vsetult is to flip the sign bit of the
operands, swap the operands and then use a (signed) pcmpgt. psubus (unsigned
saturating subtract) can be used to emulate a vsetult more efficiently:
+ case ISD::SETULT: {
+ // If the comparison is against a constant we can turn this into a
+ // setule. With psubus, setule does not require a swap. This is
+ // beneficial because the constant in the register is no longer
+ // destructed as the destination so it can be hoisted out of a loop.
I also enable lowering via psubus in a few other cases where it's clearly
beneficial: setule and setuge if minu/maxu cannot be used.
rdar://problem/14338765
Patch by Adam Nemet <anemet@apple.com>.
llvm-svn: 202301
The table argument is always 128-bit (and interpreted as <16 x i8>) so the
extra specifier for it is just clutter.
No user-visible behaviour change, so no tests.
llvm-svn: 202258
Summary:
Fixes an issue where a test attempts to use -mcpu=cortex-a15 on non-ARM targets.
This triggers an assertion on MIPS since it doesn't know what ABI to use by default for
unrecognized processors.
Reviewers: rengolin
Reviewed By: rengolin
CC: llvm-commits, aemerson, rengolin
Differential Revision: http://llvm-reviews.chandlerc.com/D2876
llvm-svn: 202256
We need to abort the formation of counter-register-based loops where there are
128-bit integer operations that might become function calls.
llvm-svn: 202192
Now that DataLayout is not a pass, store one in Module.
Since the C API expects to be able to get a char* to the datalayout description,
we have to keep a std::string somewhere. This patch keeps it in Module and also
uses it to represent modules without a DataLayout.
Once DataLayout is mandatory, we should probably move the string to DataLayout
itself since it won't be necessary anymore to represent the special case of a
module without a DataLayout.
llvm-svn: 202190
The function with uwtable attribute might be visited by the
stack unwinder, thus the link register should be considered
as clobbered after the execution of the branch and link
instruction (i.e. the definition of the machine instruction
can't be ignored) even when the callee function are marked
with noreturn.
llvm-svn: 202165
The behaviour of the XCore's instruction buffer means that the performance
of the same code sequence can differ depending on whether it starts at a 4
byte aligned address or not. Since we don't model the instruction buffer
in the backend we have no way of knowing for sure if it is beneficial to
word align a specific function. However, in the absence of precise
modelling, it is better on balance to word align functions because:
* It makes a fetch-nop while executing the prologue slightly less likely.
* If we don't word align functions then a small perturbation in one
function can have a dramatic knock on effect. If the size of the function
changes it might change the alignment and therefore the performance of
all the functions that happen to follow it in the binary. This butterfly
effect makes it harder to reason about and measure the performance of
code.
llvm-svn: 202163
For targeting pecoff, ".def foo" appears before ".short 32".
.def foo;
...
.LCPI0_0:
.short 32
foo:
CHECK-LABEL seeks not from ".short 32" but from the top of the input.
llvm-svn: 201931
shifted mask rather than masking and shifting separately.
The patch adds this transformation to the DAGCombiner:
(shl (and (setcc:i8v16 ...) N01C) N1C) -> (and (setcc:i8v16 ...) N01C<<N1C)
<rdar://problem/16054492>
Patch by Adam Nemet <anemet@apple.com>
llvm-svn: 201906
The va_start macro for AArch64 must set va_list.__stack to the address
following the last named argument on the stack, rounded up to an alignment
of 8 bytes.
llvm-svn: 201797
Summary:
This removes the need to coerce UnknownABI to the default ABI (O32 for
MIPS32, N64 for MIPS64 [*]) in both MipsSubtarget and MipsAsmParser.
Clang has been updated to disable both possible default ABI's before enabling
the ABI it intends to use.
[*] N64 being the default for MIPS64 is not actually correct.
However N32 is not fully implemented/tested yet.
Depends on: D2830
Reviewers: jacksprat, matheusalmeida
Reviewed By: matheusalmeida
Differential Revision: http://llvm-reviews.chandlerc.com/D2832
Differential Revision: http://llvm-reviews.chandlerc.com/D2846
llvm-svn: 201792
Summary:
This is consistent with the integrated assembler.
All mips64 codegen tests previously passed -mcpu. Removed -mcpu from
blez_bgez.ll and const-mult.ll to cover the default case.
Ideally, the two implementations of selectMipsCPU() will be merged but it's
proven difficult to find a home for the function that doesn't cause link errors.
For now, we'll hoist the common functionality into a function and mark it with
FIXME's.
Reviewers: jacksprat, matheusalmeida
Reviewed By: matheusalmeida
Differential Revision: http://llvm-reviews.chandlerc.com/D2830
llvm-svn: 201782
r201608 made llvm corretly handle private globals with MachO. r201622 fixed
a bug in it and r201624 and r201625 were changes for using private linkage,
assuming that llvm would do the right thing.
They all got reverted because r201608 introduced a crash in LTO. This patch
includes a fix for that. The issue was that TargetLoweringObjectFile now has
to be initialized before we can mangle names of private globals. This is
trivially true during the normal codegen pipeline (the asm printer does it),
but LTO has to do it manually.
llvm-svn: 201700
When outputting an object we check its section to find its name, but when
looking for the section with -ffunction-section we look for the symbol name.
Break the loop by requesting a name with the private prefix when constructing
the section name. This matches the behavior before r201608.
llvm-svn: 201622
The IR
@foo = private constant i32 42
is valid, but before this patch we would produce an invalid MachO from it. It
was invalid because it would use an L label in a section where the liker needs
the labels in order to atomize it.
One way of fixing it would be to just reject this IR in the backend, but that
would not be very front end friendly.
What this patch does is use an 'l' prefix in sections that we know the linker
requires symbols for atomizing them. This allows frontends to just use
private and not worry about which sections they go to or how the linker handles
them.
One small issue with this strategy is that now a symbol name depends on the
section, which is not available before codegen. This is not a problem in
practice. The reason is that it only happens with private linkage, which will
be ignored by the non codegen users (llvm-nm and llvm-ar).
llvm-svn: 201608
NaCl's ARM ABI uses 16 byte stack alignment, so set that in
ARMSubtarget.cpp.
Using 16 byte alignment exposes an issue in code generation in which a
varargs function leaves a 4 byte gap between the values of r1-r3 saved
to the stack and the following arguments that were passed on the
stack. (Previously, this code only needed to support 4 byte and 8
byte alignment.)
With this issue, llc generated:
varargs_func:
sub sp, sp, #16
push {lr}
sub sp, sp, #12
add r0, sp, #16 // Should be 20
stm r0, {r1, r2, r3}
ldr r0, .LCPI0_0 // Address of va_list
add r1, sp, #16
str r1, [r0]
bl external_func
Fix the bug by checking for "Align > 4". Also simplify the code by
using OffsetToAlignment(), and update comments.
Differential Revision: http://llvm-reviews.chandlerc.com/D2677
llvm-svn: 201497
