See `managed_storage.json` for available settings. Currently
only `noFiltering` setting is availale.
`noFiltering` is an array of strings, each being a domain for
which no filtering should occur.
Related discussion:
- https://github.com/uBlockOrigin/uBOL-issues/discussions/35
Avoid using updateContentScripts() as it suffers from an unexpected
behavior, causing injected content scripts to lose proper order
at injection time. The order in which content scripts are injected
is key for uBOL content scripts. Potential out of order injection
was causing cosmetic filtering to be broken.
Use actual storage API to persist data across service worker
wake-ups and browser launches. uBOL was trying to avoid using
storage API, at the cost of somewhat hacky code (using DNR API
to persist settings).
Make use of session storage if available, to speed up
initialization of waking up the service worker (which at this
point is necessary to properly implement cosmetic filtering).
Related issues:
- https://github.com/uBlockOrigin/uBOL-issues/issues/5#issuecomment-1575425913
- https://github.com/w3c/webextensions/issues/403
Currently, there is no other way to inject CSS user styles than to
wake up the service worker, so that it can inject the CSS styles
itself using the `scripting.insertCSS()` method.
If ever the MV3 API supports injecting CSS user styles directly
from a content script, uBOL will be back to be fully declarative.
At this point the service worker is very lightweight since the
filtering is completely declarative, so this is not too much of
an issue performance-wise except for the fact that waking up the
service worker for the sole purpose of injecting CSS user styles
and nothing else introduces a pointless overhead.
Hopefully the MV3 API will mature to address such inefficiency.
Specifically, avoid long list of hostnames for the `matches`
property[1] when registering the content scripts, as this was causing
whole browser freeze for long seconds in Chromium-based browsers
(reason unknown).
The content scripts themselves will sort out which cosmetic filters to
apply on which websites.
This change makes it now possible to support annoyances-related lists,
and thus two lists have been added:
- EasyList -- Annoyances
- EasyList -- Cookies
Related issue:
- https://github.com/uBlockOrigin/uBOL-issues/issues/5
These annoyances-related lists contains many thousands of specific
cosmetic filters and as a result, before the above change this was
causing long seconds of whole browser freeze when simply modifying
the blocking mode of a specific site via the slider in the popup
panel.
It is now virtually instantaneous, at the cost of injecting larger
cosmetic filtering-related content scripts (which typically should
be garbage-collected within single-digit milliseconds).
Also, added support for entity-based cosmetic filters. (They were
previously discarded).
---
[1] https://developer.mozilla.org/en-US/docs/Mozilla/Add-ons/WebExtensions/API/scripting/RegisteredContentScript
Source code of scriplets is now fetched directly from uBO
project, so there is no longer the need to keep duplicate
versions of scriplet code.
All scriplet filters are now supported.
Some filters with entity-based domain option can be salvaged
when there are non-entity-based domain option, but since we are
throwing away the entity-based entries, we are only partially
converting to DNR. This commit will log a warning about this
in log.txt. Before this commit, only non-salvageable filters
were logged.
This reflects the _world_ of the MV3 scripting API:
https://developer.mozilla.org/en-US/docs/Mozilla/Add-ons/WebExtensions/API/scripting/ExecutionWorld
MAIN: page's world
ISOLATED: extension's content script world
Some scriptlets are best executed in either world, so this
commit allows to pick in which world a scriptlet should execute
(default to MAIN).
For instance, the new sed.js scriptlet will now execute in
the ISOLATED world.
Also added additional safeguard against sticky unprocessed-request
status: all unprocessed-request statuses will be cleared after a
minute elapsed following intialization. The idea is that if the
user hasn't care to force a reload of the page, then it's assumed
to be by choice and uBO should stop informing about the status.
What does not work at the time of commit:
Cosmetic filtering does not work:
The content scripts responsible for cosmetic filtering fail when
trying to inject the stylesheets through document.adoptedStyleSheets,
with the following error message:
XrayWrapper denied access to property Symbol.iterator
(reason: object is not safely Xrayable).
See https://developer.mozilla.org/en-US/docs/Xray_vision for more
information. ... css-declarative.js:106:8
A possible solution is to inject those content scripts in the
MAIN world. However Firefox scripting API does not support MAIN
world injection at the moment.
Scriptlet-filtering does not work:
Because scriptlet code needs to be injected in the MAIN world,
and this is currently not supported by Firefox's scripting API,
see https://bugzilla.mozilla.org/show_bug.cgi?id=1736575
There is no count badge on the toolbar icon in Firefox, as it
currently does not support the `DNR.setExtensionActionOptions`
method.
Other than the above issues, it does appear uBO is blocking
properly with no error reported in the dev console.
The adoptedStyleSheets issue though is worrisome, as the
cosmetic filtering content scripts were designed with ISOLATED
world injection in mind. Being forced to inject in MAIN world
(when available) make things a bit more complicated as uBO
has to ensure it's global variables do not leak into the page.
uBO will now verify that at least one unprocessed network requests
at launch should have been blocked in order to warn users of
unprocessed network requests through the `!` toolbar icon badge.
For example, with default filter lists, there is nothing to block
on `wikipedia.org`, and hence in this case it's not useful to
present the user with the `!` badge.
Therefore uBO will not show the badge *only* when at least one
unprocessed network requests should have been blocked had uBO been
ready when it was fired by the browser.
Related commit:
- https://github.com/gorhill/uBlock/commit/769b8da664be
Related feedback:
- 769b8da664 (commitcomment-104695781)
The incomplete filtering status of a given tab at browser launch
will be carried over visually as a yellowish `!` badge until the
web page in the tab is force reloaded, navigated away, or closed.
The purpose is to make it obvious to end users that a web page
has not been filtered properly and to avoid issue reports
related to this.
It is expected that Firefox should never be affected by cases of
yellowish badge -- that is unless the setting "Suspend network
activity [...]" has been disabled, in which case the new behavior
will also be useful to those who disabled the setting.
Related discussion:
- https://github.com/uBlockOrigin/uAssets/discussions/16939
Until uBO's filtering engines are properly initialized, there will
be a distinct toolbar icon to help users understand that uBO may
not be fully initialized when a webpage is loaded -- often the
cause of improper filtering of trackers/ads at browser launch.
This commit is a rewrite of the static filtering parser into a
tree-based data structure, for easier maintenance and better
abstraction of parsed filters.
This simplifies greatly syntax coloring of filters and also
simplify extending filter syntax.
The minimum version of Chromium-based browsers has been raised
to version 73 because of usage of String.matchAll().
Related issue:
- https://github.com/uBlockOrigin/uBlock-issues/issues/1861
The "exceptor" feature has been rewritten, with the following
changes as a result:
- The excepted filters cease to exist when closing the logger
- It's now possible to temporary except network filters
When toggling on/off a temporary exception, filter lists are now
fully reloaded. This simplified managing temporary exceptions, and
made it easy to implement temporary exception for network filters,
but this also means there might be a perceptible delay when
adding/removing temporary exceptions. At this point I consider
this an acceptable side-effect just to bring the ability to easily
create temporary exception for network filters, while this
simplified the existing temporary exception code throughout.
Bring latest changes to procedural cosmetic filtering to uBOL.
Fix procedural filtering used in HTML filters.
Standardize quick hash algorithm used throughout to DJB2
(except that initialization step is skipped):
- http://www.cse.yorku.ca/~oz/hash.html#djb2
Same-origin as per URL address of the main document. Currently the
fix only affect top-level pages.
Related issue:
- https://github.com/uBlockOrigin/uBlock-issues/issues/1062
The previous behavior can be restored by toggling the advanced
setting `cnameIgnoreRootDocument` to `false`.
`uDom` is old and crusty and `dom` is meant as replacement. The
goal of `dom` is to be simpler and mainly just convenience
methods for handling the DOM with vanilla JS -- this is not a
framework.
Additionally, removed keyboard shortcuts pane which was useful
only on very old versions of Firefox.
Spurious updates to registered content scripts would occur when
using some regional lists, for example DEU would cause spurious
updates to registered script `css-procedural`.
Network filters with csp= option will now be enforced.
Caveat: DNR API does not have support for exception csp= rules,
so excepted csp= filters are currently rejected at conversion time.
This commit adds the ability to inject entity-based plain CSS
filters and also a set of the most commonly used entity-based
scriptlet injection filters.
Since the scripting API is not compatible with entity patterns,
the entity-related content scripts are injected in all documents
and the entity-matching is done by the content script themselves.
Given this, entity-based content scripts are enabled only when
working in the Complete filtering mode, there won't be any
entity-based filters injected in lower modes.
Also, since there is no way to reasonably have access to the
Public Suffix List in the content scripts, the entity-matching
algorithm is an approximation, though I expect false positives
to be rare (time will tell). In the event of such false
positive, simply falling back to Optimal mode will fix the
issue.
The following issues have been fixed at the same time:
Fixed the no-filtering mode related rules having lower priority
then redirect rules, i.e. redirect rules would still be applied
despite disabling all filtering on a site.
Fixed improper detection of changes to the generic-related CSS
content script, potentially causing undue delays when for example
trying to access the popup panel while working in Complete mode.
The scripting MV3 can be quite slow when registering/updating
large content scripts, so uBOL does its best to call the API only
if really needed, but there had been a regression in the recent
builds preventing uBO from properly detecting unchanged content
script parameters.
This adds support for `redirect=` filters. As with `removeparam=`
filters, `redirect=` filters can only be enforced when the
default filtering mode is set to Optimal or Complete, since these
filters require broad host permissions to be enforced by the DNR
engine.
`redirect-rule=` filters are not supported since there is no
corresponding DNR syntax.
Additionally, fixed the dropping of whole network filters even though
those filters are still useful despite not being completely
enforceable -- for example a filter with a single (unsupported) domain
using entity syntax in its `domain=` option should not be wholly
dropped when there are other valid domains in the list.
With the new csstree-based parser, it should now be
safe to parse `-abp-has` as declarative. There are over
a hundred such cosmetic filters in EasyList, and we want
to have these filters declaratively enforced whenever
possible in order to let the browser do the work natively
rather than rely on JS code.
The addition of those scriptlets will help uBOL to properly
filter more anti-blocker mechanisms on various site and also prevents
popups on many sites.
Also, fixed properly injecting scriptlets in embedded frames -- it
turns out I misunderstood the `allFrames` settings in the `scripting`
API.
Fixed trusted sites not being excluded from declarative
scripting.
Assign "uBOL_"-prefixed name to anonymous scripting functions
so that they can be easily found in performance profiler results
in dev tools.
Imrpove spread of chunks of filters across declarative scripting
files.
Consequently, AdGuard URL Tracking Protection (AUTP) has been
added to the set of available filter lists.
However, removeparam= equivalent DNR rules can only be enforced
when granting uBOL broad permissions. If broad permissions are
not granted, removeparam= equivalent DNR rules are ignored.
Exception removeparam= filters are not supported, and these are
present in AUTP and meant to unbreak some websites which are
known to break as a result of removing query parameters.
This is issue might be mitigated in the future by making the
conversion from filters to DNR rules more complicated but this
can never replace the accuracy of uBO's filtering engine being
able to fully enforce arbitrary exception removeparam= filters.
Also, it is not possible to translate regex-based removeparam=
values to DNR rules, so these are dropped at conversion time.
As with other filters to DNR rules conversion, the converter
coallesce many distinct removeparam= filters into fewer DNR
rules.
The new parser no longer uses the browser DOM to validate
that a cosmetic filter is valid or not, this is now done
through a JS library, CSSTree.
This means filter list authors will have to be more careful
to ensure that a cosmetic filter is really valid, as there is
no more guarantee that a cosmetic filter which works for a
given browser/version will still work properly on another
browser, or different version of the same browser.
This change has become necessary because of many reasons,
one of them being the flakiness of the previous parser as
exposed by many issues lately:
- https://github.com/uBlockOrigin/uBlock-issues/issues/2262
- https://github.com/uBlockOrigin/uBlock-issues/issues/2228
The new parser introduces breaking changes, there was no way
to do otherwise. Some current procedural cosmetic filters will
be shown as invalid with this change. This occurs because the
CSSTree library gets confused with some syntax which was
previously allowed by the previous parser because it was more
permissive.
Mainly the issue is with the arguments passed to some procedural
cosmetic filters, and these issues can be solved as follow:
Use quotes around the argument. You can use either single or
double-quotes, whichever is most convenient. If your argument
contains a single quote, use double-quotes, and vice versa.
Additionally, try to escape a quote inside an argument using
backslash. THis may work, but if not, use quotes around the
argument.
When the parser encounter quotes around an argument, it will
discard them before trying to process the argument, same with
escaped quotes inside the argument. Examples:
Breakage:
...##^script:has-text(toscr')
Fix:
...##^script:has-text(toscr\')
Breakage:
...##:xpath(//*[contains(text(),"VPN")]):upward(2)
Fix:
...##:xpath('//*[contains(text(),"VPN")]'):upward(2)
There are not many filters which break in the default set of
filter lists, so this should be workable for default lists.
Unfortunately those fixes will break the filter for previous
versions of uBO since these to not deal with quoted argument.
In such case, it may be necessary to keep the previous filter,
which will be discarded as broken on newer version of uBO.
THis was a necessary change as the old parser was becoming
more and more flaky after being constantly patched for new
cases arising, The new parser should be far more robust and
stay robist through expanding procedural cosmetic filter
syntax.
Additionally, in the MV3 version, filters are pre-compiled
using a Nodejs script, i.e. outside the browser, so validating
cosmetic filters using a live DOM no longer made sense.
This new parser will have to be tested throughly before stable
release.
This solves the following remaining issues regarding specific cosmetic
filtering:
- High rate of false positives in last build
- High number of generated content css files in the package
First iteration of adding scriptlet support. As with cosmetic
filtering, scriptlet niijection occurs only on sites for which
uBO Lite was granted extended permissions.
At the moment, only three scriptlets are supported:
- abort-current-script
- json-prune
- set-constant
More will be added in the future.
Specific plain CSS cosmetic filters are now supported.
Cosmetic filtering will occur only after the user explicitly
grant uBO extended permissions for a given site, so that it
can inject CSS on the site.
A new button in the popup panel allows a user to grant/revoke
extended permissions to/from uBO Lite for the current site.
More capabilities will be carefully added for when extended
permissions are granted on a site, so specific cosmetic
filtering through plain CSS is the first implemented capability.
Generic and procedural cosmetic filtering is not implemented.
The current implementation for plain CSS cosmetic filters is
through declarative content injection, which does not require
the service worker to be alive, the browser takes care to
inject the cosmetic filters.
However declarative CSS injection does not support user
styles, so the injected cosmetic filters are "weak". I consider
this is a browser issue, since user styles are supported by
Chromium, there is just no way in the API to specify user
styles for the injected content.
Also:
- Fixed dark theme issues
- Added Steven Black's hosts file
Keep in mind all this is very experimental and implementation
details in this release may (will) greatly change in the future.
Related discussion:
- a0a9497b4a (commitcomment-62560291)
The new setting, when disabled (enabled by default), allows a user
to prevent uBO from waiting for all filter lists to be loaded
before allowing network activity at launch. The setting is enabled
by default, meaning uBO waits for all filter lists to be loaded in
memory before unsuspending network activity. Some users may find
this behavior undesirable, hence the new setting.
This gives the option to potentially speed up page load at launch,
at the cost of potentially not properly filtering network requests
as per filter lists/rules.
For platforms not supporting the suspension of network activity,
the setting will merely prevent whatever mechanism exists on the
platform to mitigate improper filtering of network requests at
launch. For example, in Chromium-based browsers, unchecking the
new setting will prevent the browser from re-loading tabs for
which there was network activity while in "suspended" state at
launch.
Fixed serious regression in previous dev build in applying
`csp=` filters. Reported internally by uBO team.
Promote usage of `removeparam` in code instead of `queryprune`,
which is to be deprecated.
Removed test against previously tested hostname in
FilterHostnameDict since as per various benchmark, the
test does not really help.
Remove serialization API in Node.js code as the API is now
present in SNFE itself.
Not sure this can really happen, but if ever Math.random() would
return `0.9999999999999999`, the attribute name would start with
`{`, i.e. an invalid attribute name.
