The operand types were defined to fit the fp16_to_fp node, which
has the half as an integer type. v_cvt_f32_f16 does support
source modifiers, so change this to have an FP type and modifiers.
For targets without legal f16, this requires recognizing the
bit operations and trying to produce them.
llvm-svn: 293857
The GAS assembler supports the ".set bopt" directive but according
to the sources it doesn't do anything. It's supposed to optimize
branches by filling the delay slot of a branch with it's target.
This patch teaches the MIPS asm parser to accept both and warn in
the case of 'bopt' that the bopt directive is unsupported.
This resolves PR/31841.
Thanks to Sean Bruno for reporting the issue!
llvm-svn: 293798
@ABS8 can be applied to symbols which appear as immediate operands to
instructions that have a 8-bit immediate form for that operand. It causes
the assembler to use the 8-bit form and an 8-bit relocation (e.g. R_386_8
or R_X86_64_8) for the symbol.
Differential Revision: https://reviews.llvm.org/D28688
llvm-svn: 293667
The Requires class overrides the target requirements of an instruction,
rather than adding to them, so all ARM instructions need to include the
IsARM predicate when they have overwitten requirements.
This caused the swp and swpb instructions to be allowed in thumb mode
assembly, and the ARM encoding of CDP to be selected in codegen (which
is different for conditional instructions).
Differential Revision: https://reviews.llvm.org/D29283
llvm-svn: 293634
Just adds the vmr (Vector Move Register) mnemonic for the VOR instruction in
the PPC back end.
Committing on behalf of brunoalr (Bruno Rosa).
Differential Revision: https://reviews.llvm.org/D29133
llvm-svn: 293626
Summary:
Adds the following instructions:
* mfpmr
* mtpmr
* icblc
* icblq
* icbtls
Fix the scheduling for mtspr on e5500, which uses CFX0, instead of
SFX0/SFX1 as on e500mc.
Addresses PR 31538.
Differential Revision: https://reviews.llvm.org/D29002
llvm-svn: 293417
Summary: Small change to get the FREEP instruction to decode properly.
Reviewers: craig.topper
Reviewed By: craig.topper
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D29193
llvm-svn: 293314
This patch makes one change to GOT handling and two changes to N64's
relocation model handling. Furthermore, the jumptable encodings have
been corrected for static N64.
Big GOT handling is now done via a new SDNode MipsGotHi - this node is
unconditionally lowered to an lui instruction.
The first change to N64's relocation handling is the lifting of the
restriction that N64 always uses PIC. Now it is possible to target static
environments.
The second change adds support for 64 bit symbols and enables them by
default. Previously N64 had patterns for sym32 mode only. In this mode all
symbols are assumed to have 32 bit addresses. sym32 mode support
is selectable with attribute 'sym32'. A follow on patch for clang will
add the necessary frontend parameter.
This partially resolves PR/23485.
Thanks to Brooks Davis for reporting the issue!
This version corrects a "Conditional jump or move depends on uninitialised
value(s)" error detected by valgrind present in the original commit.
Reviewers: dsanders, seanbruno, zoran.jovanovic, vkalintiris
Differential Revision: https://reviews.llvm.org/D23652
llvm-svn: 293279
This patch makes one change to GOT handling and two changes to N64's
relocation model handling. Furthermore, the jumptable encodings have
been corrected for static N64.
Big GOT handling is now done via a new SDNode MipsGotHi - this node is
unconditionally lowered to an lui instruction.
The first change to N64's relocation handling is the lifting of the
restriction that N64 always uses PIC. Now it is possible to target static
environments.
The second change adds support for 64 bit symbols and enables them by
default. Previously N64 had patterns for sym32 mode only. In this mode all
symbols are assumed to have 32 bit addresses. sym32 mode support
is selectable with attribute 'sym32'. A follow on patch for clang will
add the necessary frontend parameter.
This partially resolves PR/23485.
Thanks to Brooks Davis for reporting the issue!
Reviewers: dsanders, seanbruno, zoran.jovanovic, vkalintiris
Differential Revision: https://reviews.llvm.org/D23652
llvm-svn: 293164
Enable the next form (intel style):
"mov <reg64>, <largeImm>"
which is should be available,
where <largeImm> stands for immediates which exceed the range of a singed 32bit integer
Differential Revision: https://reviews.llvm.org/D28988
llvm-svn: 293030
Reason: broke ASAN bots with a global buffer overflow.
http://lab.llvm.org:8011/builders/sanitizer-x86_64-linux-fast/builds/2291
Each test contains 20-30K test cases but takes only several (from 4 to 10)
seconds to complete on average machine. The tests cover the majority of
AMDGPU Gfx7/Gfx8 instructions, including many dark corners, and intended
to quickly find out if something is broken.
llvm-svn: 292974
Also fixes a much worse bug where we emitted the wrong gap size for the
def range uncovered by the test for this issue.
Fixes PR31726.
llvm-svn: 292949
Each test contains 20-30K test cases but takes only several (from 4 to 10)
seconds to complete on average machine. The tests cover the majority of
AMDGPU Gfx7/Gfx8 instructions, including many dark corners, and intended
to quickly find out if something is broken.
llvm-svn: 292922
Summary:
Add a new load command LC_BUILD_VERSION. It is a generic version of
LC_*_VERSION_MIN load_command used on Apple platforms. Instead of having
a seperate load command for each platform, LC_BUILD_VERSION is recording
platform info as an enum. It also records SDK version, min_os, and tools
that used to build the binary.
rdar://problem/29781291
Reviewers: enderby
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D29044
llvm-svn: 292824
Add a SMLoc to MCExpr. Most code does not generate or consume the SMLoc (yet).
Patch by Sanne Wouda <sanne.wouda@arm.com>!
Differential Revision: https://reviews.llvm.org/D28861
llvm-svn: 292515
If F is a Thumb function symbol, and G = F + const, and G is a
function symbol, then G is Thumb. Because what else could it be?
Differential Revision: https://reviews.llvm.org/D28878
llvm-svn: 292514
A 64-bit relocation does not exist in 32-bit ARMELF. Report an error
instead of crashing.
PR23870
Patch by Sanne Wouda (sanwou01).
Differential Revision: https://reviews.llvm.org/D28851
llvm-svn: 292373
This patch fixes bugzilla 31576 (https://llvm.org/bugs/show_bug.cgi?id=31576).
"data32" instruction prefix was not defined in the llvm.
An exception had to be added to the X86 tablegen and AsmPrinter because both "data16" and "data32" are encoded to 0x66 (but in different modes).
Differential Revision: https://reviews.llvm.org/D28468
llvm-svn: 292352
Permit explicit $fcc<X> operand in c.cond.fmt instruction.
Add c.cond.fmt to the MIPS to microMIPS instruction mapping table.
Check that $fcc1 - $fcc7 are unusable for MIPS-I to MIPS-III for
c.cond.fmt, bc1t, bc1f.
Reviewers: seanbruno, zoran.jovanovic, vkalintiris
Differential Revision: https://reviews.llvm.org/D24510
llvm-svn: 292117
Among other stuff, this allows to use predefined .option.machine_version_major
/minor/stepping symbols in the directive.
Relevant test expanded at once (also file renamed for clarity).
Differential Revision: https://reviews.llvm.org/D28140
llvm-svn: 290710
The feature allows for conditional assembly, filling the entries
of .amd_kernel_code_t etc.
Symbols are defined with value 0 at the beginning of each kernel scope.
After each register usage, the respective symbol is set to:
value = max( value, ( register index + 1 ) )
Thus, at the end of scope the value represents a count of used registers.
Kernel scopes begin at .amdgpu_hsa_kernel directive, end at the
next .amdgpu_hsa_kernel (or EOF, whichever comes first). There is also
dummy scope that lies from the beginning of source file til the
first .amdgpu_hsa_kernel.
Test added.
Differential Revision: https://reviews.llvm.org/D27859
llvm-svn: 290608
Summary: Real instruction should copy constraints from real instruction. This allows auto-generated disassembler to correctly process tied operands.
Reviewers: nhaustov, vpykhtin, tstellarAMD
Subscribers: arsenm, kzhuravl, wdng, nhaehnle, yaxunl, tony-tye
Differential Revision: https://reviews.llvm.org/D27847
llvm-svn: 290336
Replacing the memory operand in the ymm version of VPMADDWD from i128mem to i256mem.
Differential Revision: https://reviews.llvm.org/D28024
llvm-svn: 290333
Summary:
Added pair of directives .hsa_code_object_metadata/.end_hsa_code_object_metadata.
Between them user can put YAML string that would be directly put to the generated note. E.g.:
'''
.hsa_code_object_metadata
{
amd.MDVersion: [ 2, 0 ]
}
.end_hsa_code_object_metadata
'''
Based on D25046
Reviewers: vpykhtin, nhaustov, yaxunl, tstellarAMD
Subscribers: arsenm, kzhuravl, wdng, nhaehnle, mgorny, tony-tye
Differential Revision: https://reviews.llvm.org/D27619
llvm-svn: 290097
Commit on behalf of Gadi Haber
Removed EVEX_V512 prefix from scalar EVEX instructions since HW ignores L'L bits anyway (LIG). 4 instructions are modified.
The changed encodings are validated with XED.
Rviewers: delena, igorb
Differential revision: https://reviews.llvm.org/D27802
llvm-svn: 290065
One more attempt to re-commit the patch r285355, which I had to revert in r285362, because some tests were failing (the reason is because the size of the line_table varied depending on the full file name).
In the past the compiler always emitted .debug_line version 2, though some opcodes from DWARF 3 (e.g. DW_LNS_set_prologue_end, DW_LNS_set_epilogue_begin or DW_LNS_set_isa) and from DWARF 4 could be emitted by the compiler.
This patch changes version information of .debug_line to exactly match the DWARF version. For .debug_line version 4, a new field maximum_operations_per_instruction is emitted.
Differential Revision: https://reviews.llvm.org/D16697
llvm-svn: 289925
Summary:
GAS already allows flags for sections to be specified directly as a
numeric value. This functionality is particularly useful for setting
processor or application-specific values that may not be directly
supported or understood by LLVM. This patch allows LLVM to use numeric
section flag values verbatim if specified by the assembly file.
Reviewers: grosbach, rafael, t.p.northover, rengolin
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D27451
llvm-svn: 289785
This implements execute-only support for ARM code generation, which
prevents the compiler from generating data accesses to code sections.
The following changes are involved:
* Add the CodeGen option "-arm-execute-only" to the ARM code generator.
* Add the clang flag "-mexecute-only" as well as the GCC-compatible
alias "-mpure-code" to enable this option.
* When enabled, literal pools are replaced with MOVW/MOVT instructions,
with VMOV used in addition for floating-point literals. As the MOVT
instruction is required, execute-only support is only available in
Thumb mode for targets supporting ARMv8-M baseline or Thumb2.
* Jump tables are placed in data sections when in execute-only mode.
* The execute-only text section is assigned section ID 0, and is
marked as unreadable with the SHF_ARM_PURECODE flag with symbol 'y'.
This also overrides selection of ELF sections for globals.
llvm-svn: 289784
Currently, the error messages we emit for the .org directive when the
expression is not absolute or is out of range do not include the line
number of the directive, so it can be hard to track down the problem if
a file contains many .org directives.
This patch stores the source location in the MCOrgFragment, so that it
can be used for diagnostics emitted during layout.
Since layout is an iterative process, and the errors are detected during
each iteration, it would have been possible for errors to be reported
multiple times. To prevent this, I've made the assembler bail out after
each iteration if any errors have been reported. This will still allow
multiple unrelated errors to be reported in the common case where they
are all detected in the first round of layout.
Differential Revision: https://reviews.llvm.org/D27411
llvm-svn: 289643
Since 32-bit instructions with 32-bit input immediate behavior
are used to materialize 16-bit constants in 32-bit registers
for 16-bit instructions, determining the legality based
on the size is incorrect. Change operands to have the size
specified in the type.
Also adds a workaround for a disassembler bug that
produces an immediate MCOperand for an operand that
is supposed to be OPERAND_REGISTER.
The assembler appears to accept out of bounds immediates and
truncates them, but this seems to be an issue for 32-bit
already.
llvm-svn: 289306
When we see a non flag-setting instruction for which only the flag-setting
version is available in Thumb1, we should give a better error message than
"invalid instruction".
Differential Revision: https://reviews.llvm.org/D27414
llvm-svn: 288805
Doing so changes the evaluation order for relocation composition.
Patch By: Daniel Sanders
Reviewers: vkalintiris, atanasyan
Differential Revision: https://reviews.llvm.org/D26401
llvm-svn: 288666
Add assembler support for all atomic instructions that weren't already
supported. Some of those could be used to implement codegen for 128-bit
atomic operations, but this isn't done here yet.
llvm-svn: 288526
Add assembler support for instructions manipulating the FPC.
Also add codegen support via the GCC compatibility builtins:
__builtin_s390_sfpc
__builtin_s390_efpc
llvm-svn: 288525
not all lakemont MCU support long nop.
we can't assume we can generate long nop by default for MCU.
Differential Revision: https://reviews.llvm.org/D26895
llvm-svn: 288363
Summary:
This is preparation for ThunderX processors that have Large
System Extension (LSE) atomic instructions, but not the
other instructions introduced by V8.1a.
This will mimic changes to GCC as described here:
https://gcc.gnu.org/ml/gcc-patches/2015-06/msg00388.html
LSE instructions are: LD/ST<op>, CAS*, SWP
Reviewers: t.p.northover, echristo, jmolloy, rengolin
Subscribers: aemerson, mehdi_amini
Differential Revision: https://reviews.llvm.org/D26621
llvm-svn: 288279
This is not in the list of valid inputs for the encoding.
When spilling, copies from exec can be folded directly
into the spill instruction which results in broken
stores.
This only fixes the operand constraints, more codegen
work is required to avoid emitting the invalid
spills.
This sort of breaks the dbg.value test. Because the
register class of the s_load_dwordx2 changes, there
is a copy to SReg_64, and the copy is the operand
of dbg_value. The copy is later dead, and removed
from the dbg_value.
llvm-svn: 288191
This adds assembler support for the instructions provided by the
execution-hint facility (NIAI and BP(R)P). This required adding
support for the new relocation types for 12-bit and 24-bit PC-
relative offsets used by the BP(R)P instructions.
llvm-svn: 288031
This patch adds assembler support for the remaining branch instructions:
the non-relative branch on count variants, and all variants of branch
on index.
The only one of those that can be readily exploited for code generation
is BRCTH (branch on count using a high 32-bit register as count). Do
use it, however, it is necessary to also introduce a hew CHIMux pseudo
to allow comparisons of a 32-bit value agains a short immediate to go
into a high register as well (implemented via CHI/CIH).
This causes a bit of codegen changes overall, but those have proven to
be neutral (or even beneficial) in performance measurements.
llvm-svn: 288029
This patch moves formation of LOC-type instructions from (late)
IfConversion to the early if-conversion pass, and in some cases
additionally creates them directly from select instructions
during DAG instruction selection.
To make early if-conversion work, the patch implements the
canInsertSelect / insertSelect callbacks. It also implements
the commuteInstructionImpl and FoldImmediate callbacks to
enable generation of the full range of LOC instructions.
Finally, the patch adds support for all instructions of the
load-store-on-condition-2 facility, which allows using LOC
instructions also for high registers.
Due to the use of the GRX32 register class to enable high registers,
we now also have to handle the cases where there are still no single
hardware instructions (conditional move from a low register to a high
register or vice versa). These are converted back to a branch sequence
after register allocation. Since the expandRAPseudos callback is not
allowed to create new basic blocks, this requires a simple new pass,
modelled after the ARM/AArch64 ExpandPseudos pass.
Overall, this patch causes significantly more LOC-type instructions
to be used, and results in a measurable performance improvement.
llvm-svn: 288028
This patch corrects the behaviour of code such as:
.local foo
jal foo
foo:
to use the correct jal expansion when writing ELF files.
Patch by: Daniel Sanders
Reviewers: zoran.jovanovic, seanbruno, vkalintiris
Differential Revision: https://reviews.llvm.org/D24722
llvm-svn: 287918
Add missing unaligned store macros (ush/usw) and fix the exisiting
implementation of the unaligned load macros in order to generate
identical expansions with the GNU assembler.
llvm-svn: 287646
We would attempt to access the symbol section without ensuring that the symbol
was not absolute. When the assembler referenced relocation is not evaluated to
the absolute, but when we record the relocation, we would query the section.
Because the symbol is absolute, it does not have a section associated with it,
triggering an assertion. Just be more careful about the access of the section.
Addresses PR31064!
llvm-svn: 287619
This patch adds the seq macro.
This partially resolves PR/30381.
Thanks to Sean Bruno for reporting the issue!
Reviewers: zoran.jovanovic, vkalintiris, seanbruno
Differential Revision: https://reviews.llvm.org/D24607
llvm-svn: 287573
This patch adds the single operand form of the not alias to microMIPS and
MIPS along with additional tests.
This partially resolves PR/30381.
Thanks to Sean Bruno for reporting the issue!
llvm-svn: 287097
-Don't print the 'x' suffix for the 128-bit reg/mem VEX encoded instructions in Intel syntax. This is consistent with the EVEX versions.
-Don't print the 'y' suffix for the 256-bit reg/reg VEX encoded instructions in Intel or AT&T syntax. This is consistent with the EVEX versions.
-Allow the 'x' and 'y' suffixes to be used for the reg/mem forms when we're assembling using Intel syntax.
-Allow the 'x' and 'y' suffixes on the reg/reg EVEX encoded instructions in Intel or AT&T syntax. This is consistent with what VEX was already allowing.
This should fix at least some of PR28850.
llvm-svn: 286787
This adds support for the compare logical and trap (memory)
instructions that were added as part of the miscellaneous
instruction extensions feature with zEC12.
llvm-svn: 286587
This adds support for the LZRF/LZRG/LLZRGF instructions that were
added on z13, and uses them for code generation were appropriate.
SystemZDAGToDAGISel::tryRISBGZero is updated again to prefer LLZRGF
over RISBG where both would be possible.
llvm-svn: 286586
This adds support for the 31-to-64-bit zero extension instructions
LLGT and LLGTR and uses them for code generation where appropriate.
Since this operation can also be performed via RISBG, we have to
update SystemZDAGToDAGISel::tryRISBGZero so that we prefer LLGT
over RISBG in case both are possible. The patch includes some
simplification to the tryRISBGZero code; this is not intended
to cause any (further) functional change in codegen.
llvm-svn: 286585
The version of this instruction with the .w suffix already correctly accepts
this, but the alias without the .w did not.
Differential Revision: https://reviews.llvm.org/D26499
llvm-svn: 286446
This completes assembler / disassembler support for all BFP
instructions provided by the floating-point extensions facility.
The instructions added here are not currently used for codegen.
llvm-svn: 286285
Add several instructions that operate on the program mask
or the addressing mode. These are not really needed for
code generation under Linux, but are provided for completeness
for the assembler/disassembler.
llvm-svn: 286284
Add the 16 access registers as LLVM registers. This allows removing
a lot of special cases in the assembler and disassembler where we
were handling access registers; this can all just use the generic
register code now.
Also add a bunch of instructions to operate on access registers,
for assembler/disassembler use only. No change in code generation
intended.
llvm-svn: 286283
Rework patterns for branches, call & return instructions,
compare-and-branch, compare-and-trap, and conditional move
instructions.
In particular, simplify creation of patterns for the extended
opcodes of instructions that take a CC mask.
Also, use semantical instruction classes for all the instructions
instead of open-coding them in SystemZInstrInfo.td.
Adds a couple of the basic branch instructions (that are unused
for codegen) for the assembler/disassembler.
llvm-svn: 286263
Summary: This patch returns the same label if the CP entry with the same value has been created.
Reviewers: eli.friedman, rengolin, jmolloy
Subscribers: majnemer, jmolloy, llvm-commits
Differential Revision: https://reviews.llvm.org/D25804
llvm-svn: 286006
Fixes Bug 30808.
Note that passing subtarget information to predicates seems too complicated, so gfx8-specific def smrd_offset_20 introduced.
Old gfx6/7-specific def renamed to smrd_offset_8 for clarity.
Lit tests updated.
Differential Revision: https://reviews.llvm.org/D26085
llvm-svn: 285590
This patch implements two changes:
- Move processor feature definition into a new file SystemZFeatures.td,
and provide explicit lists of supported and unsupported features for
each level of the z/Architecture. This allows specifying unsupported
features in the scheduler definition files for each processor.
- Add optional aliases for the -mcpu processor names according to the
level of the z/Architecture, for compatibility with other compilers
on the platform. The supported aliases are:
-mcpu=arch8 equals -mcpu=z10
-mcpu=arch9 equals -mcpu=z196
-mcpu=arch10 equals -mcpu=zEC12
-mcpu=arch11 equals -mcpu=z13
llvm-svn: 285577
Currently, when using an instruction that is not supported on the
currently selected architecture, the LLVM assembler is likely to
diagnose an "invalid operand" instead of a "missing feature".
This is because many operands require a custom parser in order to
be processed correctly, and if an instruction is not available
according to the current feature set, the generated parser code
will also not detect the associated custom operand parsers.
Fixed by temporarily enabling all features while parsing operands.
The missing features will then be correctly detected when actually
parsing the instruction itself.
llvm-svn: 285575
LLVM currently treats the first operand of MVCK as if it were a
regular base+index+displacement address. However, it is in fact
a base+displacement combined with a length register field.
While the two might look syntactically similar, there are two
semantic differences:
- %r0 is a valid length register, even though it cannot be used
as an index register.
- In an expression with just a single register like 0(%rX), the
register is treated as base with normal addresses, while it is
treated as the length register (with an empty base) for MVCK.
Fixed by adding a new operand parser class BDRAddr and reworking
the assembler parser to distinguish between address + length
register operands and regular addresses.
llvm-svn: 285574
Also add glc bit to the scalar loads since they exist on VI
and change the caching behavior.
This currently has an assembler bug where the glc bit is incorrectly
accepted on SI/CI which do not have it.
llvm-svn: 285463
In the past the compiler always emitted .debug_line version 2, though some opcodes from DWARF 3 (e.g. DW_LNS_set_prologue_end, DW_LNS_set_epilogue_begin or DW_LNS_set_isa) and from DWARF 4 could be emitted by the compiler.
This patch changes version information of .debug_line to exactly match the DWARF version. For .debug_line version 4, a new field maximum_operations_per_instruction is emitted.
Differential Revision: https://reviews.llvm.org/D16697
llvm-svn: 285355
Fix AsmParser lines to correctly handle end-of-line pre-processor
comments parsing when '#' is not the assembly line comment prefix.
Reviewers: rnk
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D25567
llvm-svn: 284978
Summary:
Add relocations for AArch64 ILP32. Includes:
- Addition of definitions for R_AARCH32_*
- Definition of new -target-abi: ilp32
- Definition of data layout string
- Tests for added relocations. Not comprehensive, but matches
existing tests for 64-bit. Renames "CHECK-OBJ" to "CHECK-OBJ-LP64".
- Tests for llvm-readobj
Reviewers: zatrazz, peter.smith, echristo, t.p.northover
Subscribers: aemerson, rengolin, mehdi_amini
Differential Revision: https://reviews.llvm.org/D25159
llvm-svn: 284973
Add synci to the microMIPS instruction definitions, mark the MIPS sync & synci
as not being part of microMIPS. This does not cover the sync instruction alias,
as that will be handled with a different patch. Add sync to the valid tests for
microMIPS.
Reviewers: vkalintiris
Differential Revision: https://reviews.llvm.org/D25795
llvm-svn: 284962
Most z13 vector instructions have a base form where the data type of
the operation (whether to consider the vector to be 16 bytes, 8
halfwords, 4 words, or 2 doublewords) is encoded into a mask field,
and then a set of extended mnemonics where the mask field is not
present but the data type is encoded into the mnemonic name.
Currently, LLVM only supports the type-specific forms (since those
are really the ones needed for code generation), but not the base
type-generic forms.
To complete the assembler support and make it fully compatible with
the GNU assembler, this commit adds assembler aliases for all the
base forms of the various vector instructions.
It also adds two more alias forms that are documented in the PoP:
VFPSO/VFPSODB/WFPSODB -- generic form of VFLCDB etc.
VNOT -- special variant of VNO
llvm-svn: 284586
The vfee[bhf], vfene[bhf], and vistr[bhf] assembler mnemonics are
documented in the Principles of Operation to have an optional last
operand to encode arbitrary values in a mask field.
This commit adds support for those optional operands, and cleans up
the patterns to generate vector string instruction as bit. No change
to code generation intended.
llvm-svn: 284585
This patch teaches ias for mips to handle expressions such as
(8*4)+(8*31)($sp). Such expression typically occur from the expansion
of multiple macro definitions.
This partially resolves PR/30383.
Thanks to Sean Bruno for reporting the issue!
Reviewers: zoran.jovanovic, vkalintiris
Differential Revision: https://reviews.llvm.org/D24667
llvm-svn: 284485
The 'sync' instruction for MIPS was defined in MIPS-II as taking no operands.
MIPS32 extended the define of 'sync' as taking an optional unsigned 5 bit
immediate.
This patch correct the definition of sync so that it is accepted with an
operand of 0 or no operand for MIPS-II to MIPS-V, and a 5 bit unsigned
immediate for MIPS32 and later revisions.
Additionally a clear error is given when the MIPS32 version of sync is
used when targeting pre MIPS32.
This partially resolves PR/30714.
Thanks to Daniel Sanders for reporting this issue!
Reveiwers: vkalintiris
Differential Revision: https://reviews.llvm.org/D25672
llvm-svn: 284483
ld and sd when assembled for the O32 ABI expand to a pair of 32 bit word loads
or stores using the specified source or destination register and the next
register.
This patch does not add support for the cases where the offset is greater than
a 16 bit signed immediate as that would lead to a wrong/misleading error
message as the assembler would report "instruction requires a CPU feature
not currently enabled" for ld & sd for MIPS64 when their offset is not a signed
16 bit number.
This fixes PR/29159.
Thanks to Sean Bruno for reporting this issue!
Reviewers: vkalintiris, seanbruno, zoran.jovanovic
Differential Review: https://reviews.llvm.org/D24556
llvm-svn: 284481
Committing on behalf of Coby Tayree: After check-all and LGTM
Desc:
AVX512 allows dest operand to be followed by an op-mask register specifier ('{k<num>}', which in turn may be followed by a merging/zeroing specifier ('{z}')
Currently, the following forms are allowed:
{k<num>}
{k<num>}{z}
This patch allows the following forms:
{z}{k<num>}
and ignores the next form:
{z}
Justification would be quite simple - GCC
Differential Revision: http://reviews.llvm.org/D25013
llvm-svn: 284479
For compatiblity with binutils, define these instructions to take
two registers with a 16bit unsigned immediate. Both of the registers
have to be same for dahi and dati.
Reviewers: dsanders, zoran.jovanovic
Differential Review: https://reviews.llvm.org/D21473
llvm-svn: 284218
These instructions were only defined for microMIPSR6 previously. Add
definitions for MIPSR6, correct definitions for microMIPSR6, flag these
instructions as having unmodelled side effects (they disable/enable
virtual processors) and add missing disassember tests for microMIPSR6.
Reviewers: vkalintiris
Differential Review: https://reviews.llvm.org/D24291
llvm-svn: 284115
Allow instructions such as 'cmp w0, #(end - start)' by folding the
expression into a constant. For ELF, we fold only if the symbols are in
the same section. For MachO, we fold if the expression contains only
symbols that are not linker visible.
Fixes https://llvm.org/bugs/show_bug.cgi?id=18920
Differential Revision: https://reviews.llvm.org/D23834
llvm-svn: 283862
Change erroneous parsing of push immediate instructions in intel syntax
to default to pointer size by rewriting into the ATT style for matching.
This fixes PR22028.
Reviewers: majnemer, rnk
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D25288
llvm-svn: 283457
The integrated assembler evaluates the expressions such as ~0x80000000 to
0xffffffff7fffffff early in the parsing process. This patch adds compatibility
with gas so that li loads the expected value (0x7fffffff) in those cases. This
only occurs iff all the upper 32bits are set and maintains existing checks by
not truncating the result down to 32 bits if any of the the upper bits are not
set.
Reviewers: dsanders, zoran.jovanovic
Differential Review: https://reviews.llvm.org/D23399
llvm-svn: 283353
Add rsqrt.[ds], recip.[ds] for MIPS. Correct the microMIPS definitions for
architecture support and register usage.
Reviewers: vkalintiris, zoran.jovanoic
Differential Review: https://reviews.llvm.org/D24499
llvm-svn: 283334
Retrying after buildbot reset.
To lex hash directives we peek ahead to find component tokens, create a
unified token, and unlex the peeked tokens so the parser does not need
to parse the tokens then. Make sure we do not to lex another hash
directive during peek operation.
This fixes PR28921.
Reviewers: rnk, loladiro
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D24839
llvm-svn: 283111
To lex hash directives we peek ahead to find component tokens, create a
unified token, and unlex the peeked tokens so the parser does not need
to parse the tokens then. Make sure we do not to lex another hash
directive during peek operation.
This fixes PR28921.
Reviewers: rnk, loladiro
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D24839
llvm-svn: 282992
Summary: AArch64 LLVM assembler emits add instruction without shift bit to calculate the higher 12-bit address of TLS variables in local exec model. This generates wrong code sequence to access TLS variables with thread offset larger than 0x1000.
Reviewers: t.p.northover, peter.smith, rovka
Subscribers: salim.nasser, aemerson, llvm-commits, rengolin
Differential Revision: https://reviews.llvm.org/D24702
llvm-svn: 282661
Implement 'retn' simply by aliasing it to the relevant 'ret' instruction
Commit on behalf of coby
Differential Revision: https://reviews.llvm.org/D24346
llvm-svn: 282601
Add rsqrt.[ds], recip.[ds] for MIPS. Correct the microMIPS definitions for
architecture support and register usage.
Reviewers: vkalintiris, zoran.jovanoic
Differential Review: https://reviews.llvm.org/D24499
llvm-svn: 282485
Summary: AArch64 LLVM assembler emits add instruction without shift bit to calculate the higher 12-bit address of TLS variables in local exec model. This generates wrong code sequence to access TLS variables with thread offset larger than 0x1000.
Reviewers: t.p.northover, peter.smith, rovka
Subscribers: salim.nasser, aemerson, llvm-commits, rengolin
Differential Revision: https://reviews.llvm.org/D24702
llvm-svn: 282057
CodeView has an S_COMPILE3 record to identify the compiler and source language of the compiland. This record comes first in the debug$S section for the compiland. The debuggers rely on this record to know the source language of the code.
There was a little test fallout from introducing a new record into the symbols subsection.
Differential Revision: https://reviews.llvm.org/D24317
llvm-svn: 281990
We would assert that the FP setup CFI used esp/rsp always. This held up in
practice when the code was generated from IR. However, with the integrated
assembler, it is possible to have the input be user specified assembly. In such
a case, we cannot assume that the function implementation has a compact unwind
representation. Loosen the assertion into a check and bail if we cannot
represent the frame pointer in the compact unwinding.
Addresses PR30453!
llvm-svn: 281986
Whenever an add/sub immediate needs a fixup, we set that immediate field to zero,
which is correct, but we also set the shift bits to zero, which is not true for
instructions that use lsl #12. This patch makes sure that if lsl #12 was used,
it will appear in the encoding of the instruction.
Differential Revision: https://reviews.llvm.org/D23930
llvm-svn: 281898
Summary:
In case s_branch instruction target is itself backend should emit offset -1 but instead it emit 0.
'''
label:
s_branch label // should emit [0xff,0xff,0x82,0xbf]
'''
Tom, Matt: why are we adjusting fixup values in applyFixup() method instead of processFixup()? processFixup() is calling adjustFixupValue() but does nothing with its result.
Reviewers: vpykhtin, artem.tamazov, tstellarAMD
Subscribers: arsenm, kzhuravl, wdng, nhaehnle, yaxunl
Differential Revision: https://reviews.llvm.org/D24671
llvm-svn: 281896
The initial mapping symbol state is set from the triple, but we only checked
for the little-endian thumb triple, so could end up with an ARM mapping symbol
for big-endian thumb.
Differential Revision: https://reviews.llvm.org/D24553
llvm-svn: 281894
Recommitting after fixing AsmParser initialization and X86 inline asm
error cleanup.
Allow errors to be deferred and emitted as part of clean up to simplify
and shorten Assembly parser code. This will allow error messages to be
emitted in helper functions and be modified by the caller which has
better context.
As part of this many minor cleanups to the Parser:
* Unify parser cleanup on error
* Add Workaround for incorrect return values in ParseDirective instances
* Tighten checks on error-signifying return values for parser functions
and fix in-tree TargetParsers to be more consistent with the changes.
* Fix AArch64 test cases checking for spurious error messages that are
now fixed.
These changes should be backwards compatible with current Target Parsers
so long as the error status are correctly returned in appropriate
functions.
Reviewers: rnk, majnemer
Subscribers: aemerson, jyknight, llvm-commits
Differential Revision: https://reviews.llvm.org/D24047
llvm-svn: 281762
For compatiblity with binutils, define these instructions to take
two registers with a 16bit unsigned immediate. Both of the registers
have to be same for dahi and dati.
Reviewers: vkalintiris, dsanders, zoran.jovanovic
Differential Review: https://reviews.llvm.org/D21473
llvm-svn: 281724
For small, discontiguous local variable regions, CodeView can use a
single defrange record with a gap, rather than having two defrange
records. I expect that this optimization will only have a minor impact
on debug info size.
llvm-svn: 281664
Summary:
This fixes a dumpbin warning on objects produced by the MC assembler
when starting from text. All .debug$S sections are supposed to be marked
IMAGE_SCN_MEM_DISCARDABLE. The main, non-COMDAT .debug$S section had
this set, but any comdat ones were not being marked discardable because
there was no .section flag for it.
This change does two things:
- If the section name starts with .debug, implicitly mark the section as
discardable. This means we do the same thing as gas on .s files with
DWARF from GCC, which is important.
- Adds the 'D' flag to the .section directive on COFF to explicitly say
a section is discardable. We only emit this flag if the section name
does not start with .debug. This allows the user to explicitly tweak
their section flags without worrying about magic section names.
The only thing you can't do in this scheme is to create a
non-discardable section with a name starting with ".debug", but
hopefully users don't need that.
Reviewers: majnemer, rafael
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D24582
llvm-svn: 281554
Recommitting after fixing AsmParser Initialization.
Allow errors to be deferred and emitted as part of clean up to simplify
and shorten Assembly parser code. This will allow error messages to be
emitted in helper functions and be modified by the caller which has
better context.
As part of this many minor cleanups to the Parser:
* Unify parser cleanup on error
* Add Workaround for incorrect return values in ParseDirective instances
* Tighten checks on error-signifying return values for parser functions
and fix in-tree TargetParsers to be more consistent with the changes.
* Fix AArch64 test cases checking for spurious error messages that are
now fixed.
These changes should be backwards compatible with current Target Parsers
so long as the error status are correctly returned in appropriate
functions.
Reviewers: rnk, majnemer
Subscribers: aemerson, jyknight, llvm-commits
Differential Revision: https://reviews.llvm.org/D24047
llvm-svn: 281336
The changes made in r269352, r269353 and r269354 to support the
transformation of the ldr rd,=immediate to mov introduced a regression
from 3.8 (ldr.w rd, =immediate) not supported.
This change puts support back in for ldr.w by means of a t2InstAlias for
the .w form. The .w is ignored in ARM state and propagated to the ldr in
Thumb2.
llvm-svn: 281319
Allow errors to be deferred and emitted as part of clean up to simplify
and shorten Assembly parser code. This will allow error messages to be
emitted in helper functions and be modified by the caller which has
better context.
As part of this many minor cleanups to the Parser:
* Unify parser cleanup on error
* Add Workaround for incorrect return values in ParseDirective instances
* Tighten checks on error-signifying return values for parser functions
and fix in-tree TargetParsers to be more consistent with the changes.
* Fix AArch64 test cases checking for spurious error messages that are
now fixed.
These changes should be backwards compatible with current Target Parsers
so long as the error status are correctly returned in appropriate
functions.
Reviewers: rnk, majnemer
Subscribers: aemerson, jyknight, llvm-commits
Differential Revision: https://reviews.llvm.org/D24047
llvm-svn: 281249
Summary:
Prevously assembler parsed all literals as either 32-bit integers or 32-bit floating-point values. Because of this we couldn't support f64 literals.
E.g. in instruction "v_fract_f64 v[0:1], 0.5", literal 0.5 was encoded as 32-bit literal 0x3f000000, which is incorrect and will be interpreted as 3.0517578125E-5 instead of 0.5. Correct encoding is inline constant 240 (optimal) or 32-bit literal 0x3FE00000 at least.
With this change the way immediate literals are parsed is changed. All literals are always parsed as 64-bit values either integer or floating-point. Then we convert parsed literals to correct form based on information about type of operand parsed (was literal floating or binary) and type of expected instruction operands (is this f32/64 or b32/64 instruction).
Here are rules how we convert literals:
- We parsed fp literal:
- Instruction expects 64-bit operand:
- If parsed literal is inlinable (e.g. v_fract_f64_e32 v[0:1], 0.5)
- then we do nothing this literal
- Else if literal is not-inlinable but instruction requires to inline it (e.g. this is e64 encoding, v_fract_f64_e64 v[0:1], 1.5)
- report error
- Else literal is not-inlinable but we can encode it as additional 32-bit literal constant
- If instruction expect fp operand type (f64)
- Check if low 32 bits of literal are zeroes (e.g. v_fract_f64 v[0:1], 1.5)
- If so then do nothing
- Else (e.g. v_fract_f64 v[0:1], 3.1415)
- report warning that low 32 bits will be set to zeroes and precision will be lost
- set low 32 bits of literal to zeroes
- Instruction expects integer operand type (e.g. s_mov_b64_e32 s[0:1], 1.5)
- report error as it is unclear how to encode this literal
- Instruction expects 32-bit operand:
- Convert parsed 64 bit fp literal to 32 bit fp. Allow lose of precision but not overflow or underflow
- Is this literal inlinable and are we required to inline literal (e.g. v_trunc_f32_e64 v0, 0.5)
- do nothing
- Else report error
- Do nothing. We can encode any other 32-bit fp literal (e.g. v_trunc_f32 v0, 10000000.0)
- Parsed binary literal:
- Is this literal inlinable (e.g. v_trunc_f32_e32 v0, 35)
- do nothing
- Else, are we required to inline this literal (e.g. v_trunc_f32_e64 v0, 35)
- report error
- Else, literal is not-inlinable and we are not required to inline it
- Are high 32 bit of literal zeroes or same as sign bit (32 bit)
- do nothing (e.g. v_trunc_f32 v0, 0xdeadbeef)
- Else
- report error (e.g. v_trunc_f32 v0, 0x123456789abcdef0)
For this change it is required that we know operand types of instruction (are they f32/64 or b32/64). I added several new register operands (they extend previous register operands) and set operand types to corresponding types:
'''
enum OperandType {
OPERAND_REG_IMM32_INT,
OPERAND_REG_IMM32_FP,
OPERAND_REG_INLINE_C_INT,
OPERAND_REG_INLINE_C_FP,
}
'''
This is not working yet:
- Several tests are failing
- Problems with predicate methods for inline immediates
- LLVM generated assembler parts try to select e64 encoding before e32.
More changes are required for several AsmOperands.
Reviewers: vpykhtin, tstellarAMD
Subscribers: arsenm, kzhuravl, artem.tamazov
Differential Revision: https://reviews.llvm.org/D22922
llvm-svn: 281050
Summary:
Also removed duplicate code from AMDGPUTargetAsmStreamer.
This change only change how amd_kernel_code_t is parsed and printed. No variable names are changed.
Reviewers: vpykhtin, tstellarAMD
Subscribers: arsenm, wdng, nhaehnle
Differential Revision: https://reviews.llvm.org/D24296
llvm-svn: 281028
As part of this effort, remove MipsFCmp nodes and use tablegen
patterns rather than custom lowering through C++.
Unexpectedly, this improves codesize for microMIPS as previous floating
point setcc expansions would materialize 0 and 1 into GPRs before using
the relevant mov[tf].[sd] instruction. Now $zero is used directly.
Reviewers: dsanders, vkalintiris, zoran.jovanovic
Differential Review: https://reviews.llvm.org/D23118
llvm-svn: 281022
Fix the .arch asm parser to use the full set of features for the architecture
and any extensions on the command line. Add and update testcases accordingly
as well as add an extension that was used but not supported.
llvm-svn: 280971
Summary:
Previously we were trying to represent this with the "contains" list of
the .cv_inline_linetable directive, which was not enough information.
Now we directly represent the chain of inlined call sites, so we know
what location to emit when we encounter a .cv_loc directive of an inner
inlined call site while emitting the line table of an outer function or
inlined call site. Fixes PR29146.
Also fixes PR29147, where we would crash when .cv_loc directives crossed
sections. Now we write down the section of the first .cv_loc directive,
and emit an error if any other .cv_loc directive for that function is in
a different section.
Also fixes issues with discontiguous inlined source locations, like in
this example:
volatile int unlikely_cond = 0;
extern void __declspec(noreturn) abort();
__forceinline void f() {
if (!unlikely_cond) abort();
}
int main() {
unlikely_cond = 0;
f();
unlikely_cond = 0;
}
Previously our tables gave bad location information for the 'abort'
call, and the debugger wouldn't snow the inlined stack frame for 'f'.
It is important to emit good line tables for this code pattern, because
it comes up whenever an asan bug occurs in an inlined function. The
__asan_report* stubs are generally placed after the normal function
epilogue, leading to discontiguous regions of inlined code.
Reviewers: majnemer, amccarth
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D24014
llvm-svn: 280822
PowerPC assembly code in the wild, so it seems, has things like this:
bc+ 12, 28, .L9
This is a bit odd because the '+' here becomes part of the BO field, and the BO
field is otherwise the first operand. Nevertheless, the ISA specification does
clearly say that the +- hint syntax applies to all conditional-branch mnemonics
(that test either CTR or a condition register, although not the forms which
check both), both basic and extended, so this is supposed to be valid.
This introduces some asm-parser-only definitions which take only the upper
three bits from the specified BO value, and the lower two bits are implied by
the +- suffix (via some associated aliases).
Fixes PR23646.
llvm-svn: 280571
